Text + Image Flying onto the screen

Very new to Adobe Premiere Elements 10 so this is probably a stupid question...
How do I make pictures and text fly across the screen? I've done rolling credits for the end but the start I just want the logo and some text moving across the screen.
Its so easy in imovie but I can't seem to do it in Premiere Elements. I am using it on a pc by the way.
Thanks so much for any help
Kirsty

Kristy,
Welcome to the forum.
Those Effects are easily done by animating the Clips/Titles with Keyframes. Usually, one will at least start by working with the Fixed Effect>Motion>Position, and Keyframing it over time.
While the actual work is easy, one does need to get a handle on the concept of Keyframing Effects. Steve Grisetti, our tireless MOD, has a multi-part Learning Series on Basic Keyframing, available on Muvipix.com. I do nto recall if that particular series is free to all, or is only for subscribers. That will give you a big head-start with the concepts.
There is a similar thread, on exactly what you want to do, and was posted fairly recently. I will look for it, as both Steve and I go into a bit more detail. In the meantime, check out Muvipix.com, and also read the entries on "Keyframing" in the Help File.
Good luck, and will report back with a link to that thread soon.
Hunt

Similar Messages

  • Text / images burnt onto imac screen

    I have a late 2011 imac 21 inch and after a year faint blurry fine llines apeared on the left hand side of the screen from top to bottom, very faint but visible under the right conditions. Now if I open my calander for 3 min there are fine lines across the screen with very visible text burnt into the screen. The longer the computer runs the worse it gets.
    Takes about 20 min in the morning to start showing the fine lines again. I can still see December on my screen after half an hour as I type this.
    What is at fault? the lcd panel? the logic boards? What?
    Is it worth repairing myself?
    Love apple hate this one machine.
    Thanks
    Philip Muir

    First see > Avoiding image persistence on Apple LCD displays
    Then use BDAqua's suggestion, or > JScreenFix - Fix stuck pixels and image persistence

  • How to draw text onto the screen?

    Hi,
    I'm looking for a way to draw a String directly onto the screen.
    Anybody have any ideas?
    Regards
    ABourke.

    Someone posted a nice example of what the OP wants a while ago on [java.net|http://forums.java.net/jive/thread.jspa?threadID=57353&tstart=30] : [CircleScroller (jnlp)|http://mac-systems.de/circlescroller/launch.jnlp].
    It uses the 6u10 [transparant window feature|http://java.sun.com/developer/technicalArticles/GUI/translucent_shaped_windows/], but he didn't post the code itself.

  • I'm trying to make a logo animate onto the screen - is there a technique for that?

    I'm editing a TV spot for a client and want to animate their logo, by making it "draw" itself onto the screen. Any recommendations for how to do that?

    depends on how the logo looks like and what kind of 'appearance' you want ...
    drop-dead-simple:
    use any paint.app which supports psd-layers (recommending Pixelmator …), 'split' the diff. elements into separate layers (needs perhaps some retouch) and fade in/move in each layer. (made that for some other request awhile ago : http://youtu.be/uEDjHtADYj8 )
    not-that-complicated:
    in Motion, matte tool, paint some lines, which cover the logo, use the write-on behavior... (thousands of tuts at YT ... )
    all-bells-and-whistles:
    use tools as Blender, Cinema4D or mObjects (=the 3D-plugin for Motion) to re-enact the logo in 3D, flying, tumbling, lens flares, chrome shine, fire balls, Hollywood!

  • Image dropping off the screen

    I am new to Photoshop (CC).  I have been using some tools successfully, but now when I try to use the Healing, Tool, Patch, Type and some others, the image drops off the screen as soon as I place the tool onto the screen. Then I cannot work on the image.  It just started today. Amy ideas???

    Usually any issue thats have to do with the displaying an image or any part of photoshop for that matter, is due to an out dated video driver. Try updating it and see if that fixes the issue.
    If the image is just too large to display, you can hold the ctrl key and the 0 on the numeric panel to zoom out to the full size of that image.

  • I have a football game recorded on a DVD R disc that I was trying to view on my MacBook using DVD Player.  The video comes onto the screen, but immediately freezes, and then disappears.  An error message comes up saying that DVD player unexpectedly quit.

    I have a football game recorded on a DVD+R disc that I was trying to view on my MacBook using DVD Player.  The video comes onto the screen, but immediately freezes, and then disappears.  An error message comes up saying that DVD player unexpectedly quit.  My MacBook operating system is Mac OS X, version 10.5.8.  DVD Player is App version 5.0.3, framework version 5.0.7.
    However, the DVD+R works on both my Dad's and my brother's laptops.  My Dad's laptop is an iBook G4 with Mac OS X operating system, version 10.3.9.  The DVD Player is version 4.0.  My brother's laptop is a MacBook Pro with Mac OS X operating system, version 10.7.2.  The DVD Player is App version 5500.26.1 and framework version 5.5.0.  The DVD+R plays fine on their laptops, but will not play on mine.
    Anthony

    Lao Bo,
    yes, you can locate and copy a file from your HD to a USB key using UNIX commands. If you know the exact name of the file which you’re trying to locate, try this:
    find / -iname filename -print
    This command will search your entire internal disk for the particular filename. If you know that it’s within a particular user account, then you can save search time with this variation:
    find /Users/username -iname filename -print
    Either variation of this command will print all files found which have the given filename. Presuming that you’re able to identify the correct file, you can copy it to a USB key using the command
    cp -p filename_returned_by_find /Volumes/USB_volume
    If you’re not sure which volume name your USB key has, this command will show you what the possibilities are:
    ls /Volumes
    Please let me know if you have any trouble with these commands.

  • Images burn into the screen after being there for only a few minutes?

    What's wrong with my mac if images burn into the screen after being there for only a few minutes?
    I can have an icon, like a folder or something, on my desktop for only a few minutes and then when I move it an image of it will be burned into the screen for another few minutes. Same thing happens with having a webpage open for a few minutes or word document. What part of my computer is malfunctioning and is Apple responsible for repairing it?

    Hi,
    Does it happen on all desktops applications as well as Modern UI Apps? Since this issue only happened recently, I suspect a newly-installed third party program causes this issue, please check these programs if possible.
    We can also boot into clean boot mode, test the issue.
    http://support.microsoft.com/KB/929135
    Run a virus scan to eliminate some malware\virus
    Similiar issue
    https://social.technet.microsoft.com/Forums/en-US/125204a0-937e-4bc6-bb60-8fe3244b4514/all-windowsapplications-keep-minimizing-on-their-own-windows-81?forum=w8itprogeneral 
    Yolanda Zhu
    TechNet Community Support

  • Whenever I open a new Firefox Browser, the other Firefox Browsers that I have minimized to the bottom of the screen all restore, (reopen up) onto the screen with the new opened Firefox Browser, how do I stop this? Just want the new one to open on screen

    Whenever I open a new Firefox Browser, the other Firefox Browsers that I have minimized to the bottom of the screen all restore, (reopen up) onto the screen with the new opened Firefox Browser, how do I stop this? Just want the new one to open on screen and the existing stay minimized.
    == This happened ==
    Every time Firefox opened
    == I think when a I updated or downloaded a newer version of FireFox at Firefox's suggestion.

    Hmm that does sound a bit strange - I use a system quite similar to yours (XP, FF 3.6.3), and don't see this behaviour.
    I would recommend trying to start Firefox in Firefox [[Safe Mode]] (make sure you close '''all''' running Firefox instances first), and see if this problem persists.
    If not, it could be some add-on causing this behaviour - restart Firefox in Safe Mode, disable all add-ons, and enable them one by one to find the guilty one.
    If it still happens in Firefox Safe Mode, some other program (or something in Windows itself) most likely is the cause. We may be able to help with this too, so let us know what works and provide as much additional information as possible to let us help you solve this.
    Please let us know how above works out, and if we can be of further assistance. Detailed feedback is appreciated and helps us to help you better, plus enables us to better help other users with similar issues.

  • My FaceTime isn't working properly. Every call I make a black dot appears on the camera in the middle (fixed onto the screen, and is not dirt), and the calls always fail. It would ring 6 times and then say call failed. How can I fix this?

    My FaceTime isn't working properly. Every call I make a black dot appears on the camera in the middle (fixed onto the screen, and is not dirt), and the calls always fail. It would ring 6 times and then say call failed. How can I fix this?

    If FaceTime ever worked properly for you, restarting your modem (and separate router/wireless if you have such) may help.  If the problem continues, try connecting at a different location to see if the problem is within your wi-fi.
    The black dot problem may mean you need to reset your iPod.  If that does not help, it may need service by an Apple Authorized Service Provider.
    If you need help with any of these suggestions, detailed help on each topic is available via Apple's Support pages:
      http://www.apple.com/support/ipodtouch/
    Message was edited by: EZ Jim
    Mac OSX 10.7.3

  • What are little transparent notices that pop onto the screen?

    There are little transparent notices that pop onto the screen whenever the computer congratulates itself for doing something like a download or finding an infected email and eliminating it.  What are those called and how can I turn them off?

    Thanks for replying MacJack,
    It turns out that it was Growl, not an anti-virus program that was being the nuisance.
    I found out how to disable those distracting pop-ups by following the directions on Growl's website.
    http://growl.info/documentation/growl-package-removal.php

  • When I compose an email it flies up the screen when I press the shift key. I've clicked default settings on Keyboard in Preferences but it has made no difference.  It has only just started happening.

    When I compose an email it flies up the screen when I press the shift key and then comes back again. I've clicked default settings on Keyboard in Preferences but it has made no difference.  It has only just started happening.  Any ideas?

    This problem has also been plaguing me today. Here are my specifics and how I solved it (Expanding on what Quentin Holmes mentioned)
    CONFIRMED WORK AROUND! The .m4v file gets created while encoding, but Adobe Media Encoder does not re-pack it back into the .mp4 unless you select the "Export Audio" in Adobe Premier export prior to queuing. If you don't want audio, mute the individual tracks and still export audio.
    My details:
    Just bought a GH4, shooting 4k 25fps MOV, trying to simply trim a few clips and export them as H.264 .mp4 with no audio. (By the way it would be nice if we could export 4k .MOV files from the camera back into .MOV once finished editing, but in premier that frame resolution is not supported)
    Specs: Mac Mini, Quad Core i7, 16GB Ram, OSX 10.9.4, Adobe Premier Pro CS6 6.0.5, Adobe Media Encoder 6.0.2.81
    Hope that helps anyone with the same prob

  • My screen is oversensitive and letters and numbers jump onto the screen when my finger gets close so that it is impossible to write what I want. I tried turning on and off the phone but still the same when I turn back on. Any help or advice appreciated

    My screen is oversensitive and letters and numbers jump onto the screen as my finger gets close. help

    You need to re install OSX. If you have the dmg file downloaded via torrentz this is how you can create a bootable external HD or Flash drive (8 GB+)
    https://discussions.apple.com/message/23957654#23957654
    Peace
    Harry

  • How to stop on the last image and that image remains on the screen?

    hello,
    how to stop on the last image and that image remains on the screen?
    thanks
    Yves

    Two ways are;
    split the clip with the razor tool at the point you want the image to freeze, r-click and select a Frame Hold option,
    or
    position the play-head at the end of the clip you want freezing and export a still frame. Re-import it and put it in your sequence.

  • When I click on my mail icon, the page flies across the screen and gives me a new altered email page with no menu for preferences, etc.  How do I change that?

    When I click on my mail icon, the page flies across the screen and gives me a new altered email page with no menu for preferences, etc. How do I change that?

    Press the escape (esc) key to exit full-screen mode.

  • When I click on a tab in the toolbar the tab flies off the screen to the right. Suddenly after using firefox for years I cannot load any pages

    I'm using Windows XP. I've used Firefox for years but in recent weeks I've had the following problem. When I endeavour to open an internet site the tab appears in the toolbar at the bottom of the screen instead of loading the page. When I click on the tab it appears to fly across the right of screen and disappears from view. Fortunately we've left an internet page OPEN so that we can redirect our search via that. Today we had a power cut and now I cannot get Firefox to load anything. At the moment I'm using Explorer to write this. We've made no changes to our system and we're continuing to use the same virus checker we're had for years. (Kaspersky)
    One last point. When I try to load any site in Links the tab changes to the correct name but then flies off as I've previously mentioned. When I right click on the tab and choose Max or Min I have no reaction. I've tried rebooting the computer and turning it off but this does not fix the problem. I've also uninstalled Firefox and reinstalled the latest version all to no avail. Please, can someone help? Micam

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Maybe you are looking for

  • Safari crashes after re-install from Time Machine (Mavericks)

    Hi guys At a bit of a loss. Upgraded my HDD earlier and backed my old drive up, fitted new drive and left my MBP ro install from TM. Everything appears to be working apart from Safari. It crashes everytime I open it. I hoping someone here can provide

  • WD Java: Problem with Model out of other DC

    Hi, all! I' ve got 2 WD Development Components: One is hosting an Adaptive RFC-Model, the other one my UI. I put the model into its DCs Public Part and declared it as Child DC of the other one. After successfully building & deploying both DCs, I rece

  • [Solved] High power consumption of eth0

    Hi everyone, i successfully installed Arch on my new Acer Travelmate P653-MG a few months ago with the Gnome DE. Everything worked fine until a few weeks ago, when i discovered a really hard power regression due to my network interface. Before i had

  • Editing Logical Database

    Hi Experts, I need to add a new select-option in an already existing LDB. I was able to add the new select-option but I cannot add the selection text. I go to SE36 and select Selection Text then click Change. But it does not allow to add a new select

  • How to get cost center ranges for a given company and division...

    Hello Experts, Is there a table, BAPI or FM that can get the company or division of a given cost center? Currently I am creating cost center ranges in my program but that is not the best way to do it since they can always add or delete cost centers.