Text in assignment block " Add text in a log " dissapearing after save

Hi All
When creating an outbound phone activity , i am adding some text in "Add text to log" under task details. After saving the activity the text is not seen in the log . When I click on edit Ithe text is appearing in the activity.
Please help me in finding out the solution for this.
Thanks
Ramya Reddy

Hi Vivian,
I checked the text object and ID and everything looks good, I raised an OSS message, I hope to have an answer this week.
I checked this path in SPRO and the 5 points looks like productive.
Any other settings that should be revised?
Thanks you.
Best regards.
Erick

Similar Messages

Text editing - can you add text editing options on the 'in-browser editing'

Text editing - can you add text editing options on the 'in-browser editing' tool?

You can only replace existing content, not edit the page structure. Refer to the respective help sections.
Mylenium

When trying to edit text added with the Add Text option, the hand tool does not select it.

I filled out a form that was not fillable using the Add Text option. Now I need to edit it and was advised to use the Hand Tool to select it. I tried this, and it does not select the text, I see the blue box but cannot put it around the text to edit or delete it. Any suggestions?

Hi LZW 4431,
Thank You for posting on the forums. Kindly help with the information listed below.
1) Application you are using (Adobe Reader/Acrobat with exact version)
2) Operating System you are working on
Thanks,
Vikrantt Singh

I add contacts on my iphone5 sometimes by clicking add contact when I receive a text but when I add them, it doesn't seem to save them to my contacts. Can anyone tell me if I'm doing something wrong?

I don't know why it does this And it's pretty annoying

I don't know why it does this And it's pretty annoying

Filling the text and assignment automatically of WA document

can anyone please let me know where in SPRO do i configure for populating the text and assignment fields of WA document(accounting document) generated after GRN (movement type 105)?

Hi,
Good Day,
Maintain Sort Key field under GL Account (FS00) - Control Data Tab for Automatic Assignment.
Best Regards
Suresh Kumar K
If this info useful then assign points.

Can't edit text using "Add text" tool

Hello, I click "Add Text" in "Content Editing" and add some text into a PDF document. Then, I save the pdf. Then, I re-open the document and I can't edit the same text using the same "Add Text" tool OR delete that piece of text.

by the way, when you said
Test Screen Name wrote:
What you are doing is adding comments, in the Acrobat sense, rather than text (which is part of the original page). Comments are separate. So try the commenting tools.
did you mean something like this: http://www.nitropdf.com/pdf/EN/Nitro_Pro_8_User_Guide.pdf under "Annotation layer and content layer" pages 251-252. Also, when I added text using "Add Text" did it go into content layer so that I was unable to edit it after saving using acrobat ?

Can't add text to book pages

I just installed Aperture 2.1.2 and am trying to add a text box over an image on a book page. On the actions bar the only buttons that work after selecting the image are the Set Photo Filter and Set Background. The buttons for Text Style, Metadata Format, Add Text box, Add Metadata, Add Photo, Send Backwards and Send Forward are "grayed out" Also, if I try to select Add Text from the Book Actions button at the bottom of the Book pane, all of the options from the Add selection are grayed out. I am able to select and resize an image (I get yellow box around it). What do I need to do to enable these actions? The Aperture Manual just say's to use the Add Text tool, but it's not active on my system.
I am able to edit text on pages thet have pre-formatted text items.

Have the same problem and wondering if you ever found out how to make the Content and Layout buttons visible. Strangely these buttons are there if I use Aperture on my PowerBook, but not and my desktop Mac. Drives me crazy because I need to add more text and captions to some book pages.
Thomas

How to add text to the block diagram

How do you add plain text to the block diagram for documentation and can I change the background color to yelllow or something else that may be helpful? see image below
Windows is a 64 bit extension to a 32 bit graphical shell for a 16 bit patch to an 8 bit operating system originally coded for a 4 bit microprocessor, written by a 2 bit company that can't stand 1 bit of competition. Byte that Microsoft!
Solved!
Go to Solution.

Just double-click in an emtpy area and start typing. Use the coloring tool to color the text background.
(there is also a "free label" in the decorations palette, but that seems like a detour )
LabVIEW Champion . Do more with less code and in less time .

Status changes in Problem not logged in Text assignment block

Hello,
when processing status changes via actions for example in ChaRM process, the status changes are logged in text assignment block.
But for problem or incident management the status changes are not logged in text assignment block.
How to do this?
Thanks and regards,
Jan

Hello,
sorry, but this is not working, action gets executed (I scheduled it when reaching status) but no update in text log happens.
Any other idea?
Regards

Notes long text assignment block in service request component

Hi,
In Service Request , i am seeing notes assignment block . its custom one which has been created by using SRQM_NOTES as component usage in SRQM_INCIDENT_H.
Every thing works good, the notes entered in that assignment block is stored in ZS01 text id of the service request.
My requirement is to change that text id to ZS02. I mean text entered in the assingment block should be stored in ZS02 text id of the service request.
I have checked all the methods of SRQM_NOTES and SRQM_INCIDENT_H to check the code(code for updating to ZS01 text id) but i could not see that.
Could you please let me know your suggestions.
Best Regards
Rajesh

Hi,
If you set the position to 0 it will move to the 0 position not hide it
Regards
Vishal

How to create the Check box and Text Area inside the Assignment block

Dear all,
        I am new to web UI development. my requirement is to create the Check box and Text box in the Assignment block. Can anyone help me to do this requirement.
Thanks & Regards,
Ashok.

Hi,
Please place the below code in the GET_P methods of the fields.
For Text Area
CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      rv_value = cl_bsp_dlc_view_descriptor=>field_type_textarea.
ENDCASE.
For Check Box
CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      rv_value = cl_bsp_dlc_view_descriptor=>field_type_checkbox.
ENDCASE.
Regards,
Lakshmi.Y

Add style to large block of text without affecting existing styles within that text

Hello! First post here.
I have a long document of text that mostly does not have text styles attached (this was a mistake). However, there is a large number of areas of styled text within.
Is there a way to select all the text and apply a style to only the unstyled text without affecting the existing styles?
Doing this by hand text block by text block would take a long long time.
Any help is greatly appreciated.
THX!
Ian

winterm wrote:
What do you mean by "unstyled text"? It must have some definition, anyway.
Like others, [No Paragraph Style] and [Basic paragraph] are searchable, too.
boomshakalaka! Thanks! Im familiar with this panel but didnt see how to specify 'Character Style: [No Character Style]'.
Had to click on the icon

Trying to add PDF icons to my Assignment Block (CRM 7 WebUI)

Hello gurus,
I am trying to display a pdf icon in every row of my assignment block in CRM 7 WebUI. I am using one click actions, so I have an actions column, and I the logic to make the icon image appear is in the GET_OCA_T_TABLE of the context node class. When I create actions like delete and edit, it is very easy to get the icons, for example, the following code works perfectly and the icons are displayed in the assignment block:
   ls_one_click_action-id      = 'DELETE'.
    ls_one_click_action-icon    = 'delete.gif'.
    ls_one_click_action-text    = ''.
ls_one_click_action-id      = 'EDIT'.
    ls_one_click_action-icon    = 'edit.gif'.
    ls_one_click_action-text    = ''.
But, I cannot add a pdf icon.... I have tried the paths to PDF icons in the MIME repository, and I have tried getting the PDF icons like this cl_thtmlb_util=>GC_ICON_FILE_PDF or with cl_thtmlb_util=>get_icon_url(pdf)... nothing displays anything but a broken image.
Please help me! <text removed>
Jonathan
Edited by: Matt on Jun 27, 2011 10:18 AM

Thanks!!!
You mean, in the .htm file?? Well that would not work, at least not in my case, because there is almost nothing in the .htm.. Anyways, thanks a lot. I did not find it your way.... In the debugger, I found the path through the MIME repository to the default MIME types for THMLB.
Now I have to open a PDF file in IXOS in a new window in the WEBUI....... how can I call a PDF in IXOS based on my an object ID??
Thank you!!
Jonathan

Add text in mail for payment notification RFFOAVIS_FPAYM

Hi All,
We are sending payment notification to vendors via RFF0AVIS_FPAYM program. We are using SAP script form for this.
We want to add text in mail body. I have checked note 1033893. I have created text with name z* in SO10 and assigned in process exit for 00002040. But text is not appearing in mail.
Am i missing some settings ?
Please give suggestions.
Thanks in advance.
Regards,
Chintan

Hello,
Point 1
Please check up the function module attached to proces 00002040 in FIBF.
Make the changes in the function module.
Please refer:
SAP NOTE 1033893, 836169.
Also see Note 521587.
Regards,
Ravi

Putting background solid/block behind text?

New to Muse (1st day) no background in web development. Have created a master template that has a tiled image for browser background fill. Page text does not display well on top of the background image so I added a white solid block that serves to define the content area of the page. However, when I add text to an actual page (not the template), if I add a lot of text the background block does not expand vertically to enclose the text I add. The result is text that overflows the background solid block and displays (poorly) over the background fill like so:
I am probably not going about this in the right way but am unsure what the correct method would be to define a background color that expands/contract dynamically with the content of different pages.
Any help would be greatly appreciated.

Instead of using a white rectangle block , you can try to use a white fill for text frame itself which would address the issue.
Thanks,
Sanjit

Text in assignment block " Add text in a log " dissapearing after save

Similar Messages

Maybe you are looking for