Text in Bex analyzer is giving problem

Hi Experts
i have two issues with my Bex analyzer, RSRT and Portal
1. i have report which has Project code and its description (text) when i am runing this report for some project codes the text is not displaying instead it showing space, if i go to that particular project and say keep filter value and select only that value then its showing the text in that column...what could be the reason.
2. i have created variable for my report its displaying perfectly in bex analyzer but in rsrt and web portal...the variable screen is getting ignored.
what could be the reason.
thanks and regards
Sreedhar

Hi,
Check the behavior of your web template : parameter "display variable screen" must be ON.
Hope that helps.

Similar Messages

Bex Analyzer Filter 0CALDAY problem

Hello,
We having a problem in our BEX Analyzer, when we are filtering the characteristic 0CALDAY with a interval range based in the last days of a month (Example from 21.03.2014 to 25.03.2014), the Analyzer shows the messsage error "For characteristic 0CALDAY, enter value in a permitted format". But if we put the range 01.03.2014 to 20.03.2014, the Query executes without problem.
The same occurs with other months either.
Examples:
Report:
Filter range 01.03.2014 to 20.03.2014:
Filter range 21.03.2014 to 25.03.2014 (PROBLEM):
The same filter, but in single values format:
Could anyone help me to solve this problem?
SAPGUI version 7.03 patch 7
BIAddon (Anlyzer) patche 6
Thanks in advance.

Corrected with the notes:
1935435 BExAnalyzer: Filter with range does not work correctly
1921770 BExAnalyzer: Filter works incorrectly
1914698 BExAnalyzer: General Filter Problems
Thanks

Working in BEx Analyzer but giving error dump in Web Analyzer

Hello Experts,
I have a BEx Query, that has couple of customer exits for initial filter selection, and some base KFs and conditions as part of definition. When I run this query in RSRT or in Bex it was running fine, and results showing up in 3 to 5 seconds hardly 10 seconds.
but the same query throwing error in Portal / Web Analyzer.
error contains;
Error Summary : error processing the current request
root cause: The initial exception that caused the request to fail was:
java.lang.UnsupportedOperationException
Messages: warning there is a condition on Plant and Material to suppress results.
contest: under this heading many line of HTML code
when I debug the query in RSRT, I found any issue, all the exits, and the query is quite OK.
does anyone has any idea, whats going wrong?
we cannot suspect the portal / Java patches or anything, Because we have other queries running good.
could someone give me some idea..how to go through this portal/web related errors.?
Appreciate your time and help

Thanks for your help.
This issue was caused by "Bad programming in Customer Exit". Exit is trying to give too many Single values as selection to certain batch characteristics plus some are redundant. So code logic modified to fetch distinct values hence problem solved.
it worked in BEx analyzer but not in Web is just because of its limitations. As I said there is no syntax errors in the exit rather bad logic.
Thanks Again

BEx Analyzer 7.0 Problem

Hi All,
I am using BEx Analyzer 7.0 in a new laptop assigned to me by my customer. It has windows xp and office 2003.
My SAP GUI is 710 version with patch level 11 and BI Add-on 800.
The problem what i face is, after opening Analyzer, when i am clicking on the open button, nothing is happening. No open window is coming. And none of the other buttons are working...
Also, when i hover the mousepointer over the analyzer toolbar buttons, the button name that displays is in German language.
Anybody has any clues about this issue?
Thanks in advance,
Regards,
BIJESH

Hi Bijesh,
Try this
Open a normal excel sheet --> Tools --> Macro --> Security
Select the low security level over there. Because of high security excel can not run macros.
Try this and let me know.
Regards,
Ajinkya

Bex analyzer - internal error problem with table c_t_variable

HI All,
When ever I try to refresh a query in Bex-Analyzer ,Iam getting "internal error problem with table c_t_variable".
Please advise
Edited by: Aparna Duvvuri on Jan 13, 2010 10:53 AM

Hi Aparna,
try to open the query in RSRT and debug the query.the error is due to some customer exit variable so try to debug the code for the variable and rectify it.
Thanks,
Ashok

BEX Analyzer - Query Crashes Problem

Dear all,
I have consumption of 5 million customers. What i need to do is to group consumptions depend on groups:
Lets say 0-100 USD 100-1000USD 1000-5000 USD in bex analyzer,
my query works fine with less data, however when i run with 5 million customer, bex analyzer crashes when running query.
What can i do that? should it be reletaed with ram? or olap cache? How to run query successfully?
Thanks

Hi
Excel 2007 has got only one million no of rows. restrict your query as much as possible. We also faced the similar issue when executing query based on articles.
Try creating different queries based on groups such as customer group or material group then execute. your system performance drastically goes down if you execute such a big query without many restrictions.
Thanks
Srikanth

BEx Analyzer 7.20 problem

Hello
I am testing the new GUI 7.20, and there is a problem with Business Explorer Analyzer. When starting reports from GUI, with RRMX transaction, I get the following error trace:
Error while starting RFC server ' 3'
Front-End Trace Dump -
SAPBEX0serverLaunch(sysNo=23, user=ALEMAJIC,
workbookID=MHXWE9GBEGE9C1UOLK03L892B, queryID=, gw
Service=3323, gwHost=/H/SAP-gateway/H/192.168.133.
14, sessionID=BEXANALYZERC0A8850E2EC44C29A8FB09D10
0000000, jumpType=, jumpTarget= >>> SAPBEX0directL
aunch(sysNo=23, user=ALEMAJIC, workbookID=MHXWE9GB
EGE9C1UOLK03L892B, queryID=, jumpType=, jumpTarget
= Get WorkbookID and SessionID WorkbookID: MHXWE9G
BEGE9C1UOLK03L892B Session: _ >>> addinName(iSessi
on=_) isLegacyOpen() <<< isLegacyOpen():False
<<< addinName():BExAnalyzer.xla >>> isAddinLoaded(
loadIfNotloaded=True) >>> addinName(iSession=_)
isLegacyOpen() <<< isLegacyOpen():False <<< addi
nName():BExAnalyzer.xla Get Addin: Application.Wor
kbooks(BExAnalyzer.xla) <<< isAddinLoaded():True R
un(BExAnalyzer.xla!SAPBEXgetConnection) Check conn
ection object settings SAPBEX0directLaunch: no con
nection, Returncode:1 <<< SAPBEX0directLaunch():1
Session: _ Get server Object: CreateObject("SAP.BI
WRFCServerCtrl.1") SAPBEX0serverLaunch: error, Ret
urncode:3 <<< SAPBEX0serverLaunch():3
End of the Front-End Trace Dump -
details for the RFC error give Message no. RSR_LAUNCH_EXCEL047
I have tried it with Office 2007 and 2010 with the same result.
Any ideas?
Thanks
A.
Edited by: Aleksandra Lemajic on Jun 29, 2010 10:09 AM
Edited by: Aleksandra Lemajic on Jun 29, 2010 10:10 AM
Edited by: Aleksandra Lemajic on Jun 29, 2010 10:11 AM

Hi,
the note suggested by Orla is exactly the one that should solve this issue. But the parameter REUSE_XL_INSTANCE is not relevant here as it will not be used at all in RRMX when launched from SAP Gui 7.20 after this note has been implemented.
Regards
Matthias

NW 2004s Bex Analyzer Variable screen problem

Our BW system was upgraded from 3.1 to NW 2004s (SPS 8/FEP 9).
When we refresh the query in the workbook that has multiple queries, then the variable screen displays the variables from all queries.
For example: Query 1 has Posting Period single value variable, Query 2 - Posting Periods interval variable. When Query 1 is refreshed, the Variable input screen will display both variables - Posting Period single value variable and Posting Periods interval variable.
Please let me know if you need any further details and if there are any OSS notes available.
Thank you,
Elena.

Hello Prakash
In BW 3.5 we had, if we have a Workbook with more than one Query, while refresh, if our cursor used to be outside the Query area, then it used to ask "Do you want to refresh all Queries on Workbook", if we say, it used to refresh all the Queries, by Promting Variable Screen multiple times.
"Melt" kind of function in this case should help.
But do we have method to refresh one query of the sheet only and not rest of them. I am afraid you may say no. But thought to recheck at least once more.
Pankaj Gupta

Problem in executing query in browser and bex analyzer

i am not able to execute query in browser nor bex analyzer...
problem is that i dont have option to run in bex analyzer in query designer (menu bar seems missing in query designer and how can i get enabled
and when execute the query in browser using bex query designer ..it prompts me with following error
URL http://saperpdev.saperpdev.com:8002/sap/bw/BEx call was terminated because the corresponding service is not available
Note
■The termination occurred in system ERD with error code 403 and for the reason Forbidden.
■The selected virtual host was 0
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:SAPERPDEV_ERD_02-v:0-s:403-r:Forbidden
and i tried to open the query from bex analyzer level
it prompts me as follows
macros are disabled because the security level is set to high and digitally signedtrusted certificate is not attached to the macros,to run the macros change the security level to lower settings
pls suggest me

hi suman,
thanks for your response.. but let me be more clear
i am using sap gui 7.20 front end and when i execute rrmx i am able to navigate to BEx analyzer but when i tried to open a report which i create i get following error message..
you do not have sufficient authorization for infoprovider zic_proj
function module /SDF/AL_MAP_TRANSID_LOGH doesnt exit
second thing is that i tried from bex query designer to execute the report ..but i am not able to execute the report...
i hope some connections seems missing..please let me know what to do ASAP..
and where can i post this question to get fast reply

Problem with bex analyzer v7

Hello,
I have installed SAP GUI 7.10 and everything is working fine, but the bex analyzer. The problem is that I can see the Toolbox but when Im clicking on the icons of the toolbox it does not work at all, it does not execute anything, so i can not open or edit queries and so on. I have tried to install the last patches (bw 11 and 12), but I can not, I got a message that the patches already exist.
I would like to know what should I install for making it works..hopefully someone could help because I have tried almost everything and I dont know what is the problem.
Thanks in advanced,
Luis

Hi,
I do not mean it, i do not need to launch the correct version of the analyzer from the bw system via rrmx transaction. My problem is that wehn i launch the analyzer via windows like this:
start -> Business explorer -> Analyzer
I can not use the functionalities of the analyzer, they are inactive. The point is: Is it something related with the SAP GUI installion? Have something to do with excel? Or with the windows service pack??
I have installed in my computer the following:
- SAP GUI 7.10
-Windows service pack 2
- Microsoft office 2003.
Thanks and Regards,
Luis

BEX ANALYZER NOT WORKING

Dear Expert ,
i have installed sapgui 7.10 on windows 7 and also installed patch 16 for sap gui . sap gui working successfuly and connect to the server .when i open the bex analyzer and want to open any query , no system is shown whom i can connect it is blank and when i try to enter the username and password manaually it gives error .
Error Group
RFC_ERROR_PROGRAM
Message
Ent
<deleted by Moderator>
Edited by: Siegfried Szameitat on Jul 6, 2010 3:19 PM

Hi Faisal
Even I faced the same error while using SAPGUI 710 on Win7 with Excel 2007. You can try to get the latest Patches of the BEx 7.0 Addon and BEx 3.5 addon.
In case it still doesn't work, I tried this work around and it worked.
1. Login to the BW System using SAPGUI
2. Run the transaction RRMX and it will start BEx Analyser and you would be connected to the BW System (So no login reqd)
Please note that I didn't have problem with Query designer, only BEx Analyser was giving problem.
Also if you are able to solve the problem, please update the Process you achieved. There is problem in using BEx Analyser with Win7-Excel 2007/2010 for now. Let have a work around at least till the time SAP/MS Fixes this.
Regards
Abhishek

Global working Command-Box in Bex Analyzer

Hallo everybody,
i have the following Problem in creating a Planning book in Bex-Analyzer (Excel):
My Problem is to allow the user to add to every Attribute a comment field in a Bex Analyzer Workbook witch is global available to see. That means that the command field is available for every user which open this Workbook in Bex Analyzer an also can be filled with information.
Have anyone an idea for a result of this Problem?
Thanks.
David

Hi,
when you open the Saved Query/WorkBook from your desktop
System will prompt you for Access Rights (Credentials)
This is because you will have More than One Server in the GUI
Select the appropreiate Server/System
and Click ok
Then give the Client ID ,User name & Password
The Query /Bex get opens for you
Thanks
HARI

Problem in BEx analyzer output in BI dev and BI Quality

Hi All
I am facing a problem in BEx analyzer output in BI Dev and BI Quality server where the query is make on BI infoset.
When i am executing the query in BI dev server then it is giving the output result but when i tried to executing the BI query in BI quality server the i got 'No available data found result'.
I have also checked the same selection input result in infoprovider for infoset and output is getting for the same.
Please suggest for regarding solution.
thanks & regards,
Gourav Sekhri

Hi,
check whether you have loaded data in to quality server if no, please load data for all the target involved in info set. If data loaded check all the target 'request for reporting available 'or not.
Also check whether data is showing in infoset or not.. if data availble there change your selection critiria accordingly.
Thanks
BVR
Edited by: binu v. rajan on Aug 20, 2011 4:23 PM

Problem of hierarchy in bex analyzer

Dear all,
I met a problem when I using Bex analyzer to run a query, there is a characteristic 0CS_PLEVEL (posting level) with a hierarchy. If the characteristic is displayed in the row or column, i can filter with the hierarchy node, everything seems to be fine. But if the 0CS_PLEVEL is set to be a free characteristic in the query, when I filter with hierarchy text node (not leaves), then there will be wrong message about 'No applicable data found', but if I add drill down according to Posting Level in rows, it indeed has data value.
And I tried filtering value with same hierarchy node with other query which is built based on Multiprovider, everything is fine.
I wonder if there is any speciall setting for filtering by hierarchy node in the query based on virtualprovider 0BCS_VC11?
Your reply will be appreciated.

Hi,
In the Exception definition,Make sure you have selected following :
In Display tab -> Select Exception affects data cells
in cell restrictions tab -> Exception affects everything
After that,once you execute the query,Exceptions should be shown on all levels.

Text characters displayed as # on Bex analyzer (excel)

Hi all,
I am having issues with Turkish Charaters displayed on the report output on Bex analyser.
The Turkish text characters in the fields like Name 1, Name 2, city are displayed in # format.
This is happening only when the report is executed on Bex analyzer (excel). In BW system I can see the turkish characters properly. There is no # symbol anywhere when i check in cube or master data.
The # sign is not shown when the query is executed on internet explorer(web report). This issue is only with Bex analyzer(excel).
Some sample data is as below.
Correct data in BW cube or master data: ÜCRETLI ÜRETICISI TÜ
The same is displayed when executed the report over web.
But when executed on BEX analyzer(Excel) it shows as: #CRETLI #RETICISI T#
This was not happening last month. I was able to see the turkish characters last month properly on BEX analyzer.
Now we are having this # issue.
Can anyone suggest what could be the problem with? and how we can rectify this?
Thanks in advance

Hi Maddy,
I also think it is a front-end issue.
The texts look fine in RSA1 and in Web Analyzer.
The problem with the codepage variable is that as far as i know it can have only one value.
On my report I have a list of purchase orders with the vendors.
The vendors come form different countries and are maintained by the country's affiliate in their native language.
The user needs to see the texts for all displayed vendors regardless the language and alphabet.
Right now I have probelms with Greek, Bulgarian and Serbian.
But next month the report may contain the vendors from other countries.
Therefore I would have to add all languages to codepage variable.
In fact in my system it doesn't even work for one value.
I also added other languages to windows regional settings but it didn't help.
Do you have any tips on that?
Thanks,
Marek

Text in Bex analyzer is giving problem

Similar Messages

Maybe you are looking for