Text in FSV by using alternative COA

I have created a FSV with alternative account nos. If i run F.01 by giving company code, FSV and by selecting alternative account no., only i am able to get the alternative gl account no. in item text coloumn, i am not getting the text alongwith no. in output.

hi bsr
i have checked out all the possibilities that could lead to the problem which u r facing, i want u to check ur g/l mapping in fse2
regards
sayeed

Similar Messages

Help, just got my iphone5 today and it is still not letting me text or phone or use the apps is there a maximum time i need to leave it for before it will be ready to use??

got my iphone5 today and its not letting me text or phone or use the internet on it. is there an amount of time i am meant to leave it until i will be able to use this as a phone!

What did your carrier say when you contacted them about the problem?

TS4268 I CAN NOT RECEIVE TEXT MESSAGES FROM PEOPLE USING IMESSAGE - I HAVE MY IMESSAGE TURNED OFF BECAUSE I DO NOT WANT TEXTS GOING TO ALL MY ACCOUNTS - HOW DO I RESOLVE THIS PLEASE HELP - MISSING SEVERAL IMPORTANT COMMUNICATIONS...

I CAN NOT RECEIVE TEXT MESSAGES FROM PEOPLE USING IMESSAGE

On an iPhone your iMessages will go to your phone number.
You can select another email to use on iPod or iPad.
Go to settings
Messages
Send and receive
Check your phone number and uncheck the common Apple ID you share so your messages will not go to other devices.

HT201263 my phone is in recovery mode and wont restore. instead i receive the error message 1604. i have used alternative usb cables and am at a loss. has anyone else had this problem?

Hi,
my phone is in recovery mode and wont restore. instead i receive the error message 1604. i have used alternative usb cables and am at a loss. has anyone else had this problem?

Hi there hstear93,
You may find the information in the article below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
-Griff W.

How to find out what text encoding has been used in mp3 tag

Hello
I have some foreign songs that I am importing into itunes. When a song called "04.公路塵埃北合起." gets imported, it comes up in itunes as "04.§Ω∏Ù π–ÆJ •¶X∞"
Now I don't know a lot about different text encodings, but from what I've read on the forums is that the problem is that the tags that are encoded on the srcfiles are not unicode. I have tried the java application "UnicodeRewriter" recommended elsewhere in the forums, but both the commone Chinese ecodings, viz Big5 GBK etc.
Is there a way to cut a world from (eg a chinese glyph) and somehow find out what text encouding has been used?

Sorry, that question wasn't very well phrased. I'll try it again.
I have some foreign songs that I am importing into itunes. When a song called "公路塵埃北合起" gets imported, it comes up in itunes as "§Ω∏Ù π–ÆJ •¶X∞"
Now I don't know a lot about different text encodings, but from what I've read on the forums is that the problem is that the tags on the srcfiles are not unicode. I have tried the java application "UnicodeRewriter" recommended elsewhere in the forums, but whatever I sent the source encoding to, eg Big5, GBK, or one of about 9 others, I just get different types of garbage coming through.
Is there a way I could take the original glyph in the file name (which shows up correctly on my desktop) and paste it into some sort of table. That table will then show me how that glyph will look in all different encodings without the correct conversion. So if I can match my "公" to my "§" I'll be able to see what the src encoding is.
I know this is a longshot, but any help appreciated.
Sorry for the rather rubbish explanation earlier.

What are the best Voice to Text app's for use in classroom?

What are the best Voice to Text app's for use in classroom?

Hi I did download the software you suggested which you mentioned in in our iphone.
However the This did not happen to my text
"text it will appear a botton "Talk" and you're going to have a Text-to-Speech."
I have to hold my finger on the taxt and it says copy and next word is text. so the text needs to behightlighted each time till the end, which is difficult to do. why does the "talk" appear on the bottom?
What do I need to do for that to appear?
Thank you in advance for the rplies.

What are the best Voice to Text app's for use in business meetings?

What are the best Voice to Text app's for use in business meetings?

Hi I did download the software you suggested which you mentioned in in our iphone.
However the This did not happen to my text
"text it will appear a botton "Talk" and you're going to have a Text-to-Speech."
I have to hold my finger on the taxt and it says copy and next word is text. so the text needs to behightlighted each time till the end, which is difficult to do. why does the "talk" appear on the bottom?
What do I need to do for that to appear?
Thank you in advance for the rplies.

Which type of text field should I use?

I am having a problem selecting the best object to use to display and control text. If I use a TextArea component, I have problems controling it with code and I hate getting caught up in Hbox and VBox layout issues. Also, I cannot seem to generate a TextArea in ActionScript.However, I can create a listener with a valueCommit event which allows me to respond to changes to its content. Can I create a TextArea with AS?
On the other hand, I can generate a TextField with AS and then control exactly where it appears, but I cannot find an event that allows me to respond when the contents of the TextField changes. Is there an event that responds when the contents of a TextField changes dynamically?
Thanks for your time.

TextField is smaller and faster. It should dispatch a CHANGE event when the user types, but no event if you programmatically set the text.
It also depends on whether you need scrollbars or not. You can certainly create a TextArea in AS3.
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui

How do I drag an image or text box to the "workspace" off of my working file but where I can still see the image and text box for future use?

How do I drag an image or text box to the "workspace" off of my working file but where I can still see the image and text box for future use?
When I drag the item off of the trifold that I am creating, it just disappears but I still want to use it. I just need to move it out of the way to modify other portions of the document.
thanks,
C

Add another page below the current one to use as a storage area. You can't use the grey area around the page for storing items you want to use later.
Go to the Pages Menu>Provide Pages Feedback if you would like to request this feature be added in future versions.

Setting Font for converting multiple text files into PDF using VB 6.0

Dear All,
Am converting multiple text files into PDF using VB6.0. Currently, am unable to control the font face and size for the generated files. Below is the procedure am using for each file;
Public Sub proc_convert_to_PDF(srcFilename As String, destFilename As String)
Dim p_AcroApp As CAcroApp
Dim p_VDoc As CAcroAVDoc
Dim p_DDoc As CAcroPDDoc
Dim IsOk As Boolean
Set p_AcroApp = CreateObject("AcroExch.App")
Set p_VDoc = CreateObject("AcroExch.AVDoc")
Call p_VDoc.Open(srcFilename, "")
Set p_VDoc = p_AcroApp.GetActiveDoc
If p_VDoc.IsValid Then
Set p_DDoc = p_VDoc.GetPDDoc
' Fill in pdf properties.
p_DDoc.SetInfo "Title", Format(Date, "dd-mm-yyy")
p_DDoc.SetInfo "Subject", srcFilename
If p_DDoc.Save(1 Or 4 Or 32, destFilename) <> True Then
MsgBox "Failed to save " & srcFilename
End If
p_DDoc.Close
End If
'Close the PDF
p_VDoc.Close True
p_AcroApp.Exit
'Clear Variables
Set p_DDoc = Nothing
Set p_VDoc = Nothing
Set p_AcroApp = Nothing
End Sub
What I need;
1) to be able to set the font face of the destination file ( destFilename)
2) to be able to set the font size of the destination file ( destFilename)
Am using Adobe Acrobat 7.0 Type Library
Kindly Help.
Thanks in advance

We didn't say it doesn't work. We said it isn't supported.
There are a number of other ways to make a PDF. The one which would
give the most control is if your application directly printed to GDI,
controlling the font directly. This could print to Adobe PDF.
You could look for an application that gives control of font for
printing.
You could use a text-to-PostScript system and distill the result. You
could even look for a non-Adobe text-to-PDF.
Working in the unsupported and dangerous world you chose, the font
size for text conversion is set (and this is very bad design from
Adobe) in the settings for Create PDF > From Web Page. There is no API
to this.
Aandi Inston

Finding text in a PDF using preview has stopped working (correctly)

Finding text in a PDF using preview has stopped working (correctly).
When I search for certain words in a PDF using preview, it correctly finds all the pages in the document with that word. However, it no longer highlights the word being searched for. I have looked through the various settings and cannot figure out how to turn this back on.
Thanks.

4Shared worked, but having to register to retrieve files from there is a nuisance.
The problem is that you use special graphic state operators inside text objects which is not allowed:
BT
/printmatic_F1 58.133398014634 Tf
q
/DeviceCMYK CS
1 1 1 1 SCN
/DeviceCMYK cs
1 1 1 1 scn
0.62060289801053 w
0 J
0 j
2.189349112426 M
0 Tr
/printmatic_F1 58.133398014634 Tf
1 0 0 1 86.448306387737 264.65046258267 cm
(t) Tj
Q
q
/DeviceCMYK CS
1 1 1 1 SCN
/DeviceCMYK cs
1 1 1 1 scn
0.62060289801053 w
0 J
0 j
2.189349112426 M
0 Tr
/printmatic_F1 58.133398014634 Tf
1 0 0 1 102.60939103581 264.65046258267 cm
(e) Tj
Q
q
/DeviceCMYK CS
1 1 1 1 SCN
/DeviceCMYK cs
1 1 1 1 scn
0.62060289801053 w
0 J
0 j
2.189349112426 M
0 Tr
/printmatic_F1 58.133398014634 Tf
1 0 0 1 134.93156033194 264.65046258267 cm
(x) Tj
Q
q
/DeviceCMYK CS
1 1 1 1 SCN
/DeviceCMYK cs
1 1 1 1 scn
0.62060289801053 w
0 J
0 j
2.189349112426 M
0 Tr
/printmatic_F1 58.133398014634 Tf
1 0 0 1 163.99825933926 264.65046258267 cm
(t) Tj
Q
ET
Have a look at the PDF specification ISO 32000-1:2008 (e.g. at http://www.adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/PDF32000_2008.pdf). Table 51 shows that q, Q, and cm are special graphics state operators, and Figure 9 illustrates that these operators, therefore, are not allowed in text objects, i.e. between BT and ET.

After saving a pdf as Excel workbook the numbers remain text and cannot be used in calculations. Is there a better way to convert into real digital numbers?

After saving a pdf as Excel workbook the numbers remain text and cannot be used in calculations. Is there a better way to convert into real digital numbers?
I have tried to convert the pdf to Word instead but same difficulty with numbers: look like numbers but not usable for calculations

Excel has a 'text to numbers' function, I would use that.
Convert text to numbers. Microsoft Excel.

HEADER TEXT in purchase orders using BAPI_PO_CREATE

How to update HEADER TEXT in purchase orders using BAPI_PO_CREATE or BAPI_PO_CREATE1?Please advice for both types.

Hi Srini ,
IF you are using the BAPI_PO_CREATE , we are not having the parameter to pass Header Text.
If you want to get Header Text directly then Use BAPI_PO_CREATE1 wiht a parameter POTEXTHEADER (I am not sure it is there in 4.7).
If BAPI_PO_CREATE1 does not exist in 4.7 then use create_text function module to update the the Header text
Hope it helps
Rgds
Sree M
Edited by: Sree Merugu on Jun 13, 2008 5:10 PM

How to use alternative SQL statements in EJB

I have a probelm to use alternative sql statements in EJB,
could any one sugg on this topic,
Thanks in advance.

Please explain your problem better. Really can't figure what you are trying to do.....
choosing which sql statement to use at runtime
or creating dynamic sql statement at runtime
which??
Regards

Displaying text in different languages using smart forms

hi,
I am working on smartfroms.
I have to display the text in different languages using smartforms.
how to proceed ?
thanks,
Aruna.

To Display in Different Languages:
Smartforms:
In the Smartform you create:
In General Attributes, in Translate, select the radiobutton 'Into Selected Languages' and specify the lang for which you want the translation to be available.
To translate:
Go to SE63.
In menu, Translation -> ABAP Objects -> Other Long Texts.
In the Object Type Selection window that appears, expand FS ( Forms and Styles) and choose SSF (SAP SmartForms)
Specify your form name in Object Name and select the source and target lang and click on Edit button.
In the editor screen specify translated text in the lower half.
After you are done, click on Save Active button.
To view your form in the translated language, specify that language when you login.
SAPscripts:
Goto SE76.
Specify the script name, source and target language. Click on Create/Change button.
Specify all the translations. Click on release.
It will prompt you to translate window contents.
Double click on the window and translate the contents. When you are done, the Translation Status will become COMPLETED. Click on Release again.
(You can edit and check too)
Now when you preview by choosing the desired language, the translated script is displayed.
Hope this helps
Edited by: Jayanthi K on Jan 15, 2009 9:34 AM
Edited by: Jayanthi K on Jan 15, 2009 9:35 AM

Text in FSV by using alternative COA

Similar Messages

Maybe you are looking for