Text in my headers is now in Fractions

A few days ago parts of my email headers and certain email blasts have text replaced with what looks like fractions.
You can view an example from this screenshot link:
http://www.bigthinkingbythehour.com/FractionType.jpg
Any thoughts?
I'm running Panther 10.3.9

jimcourtri,
According to Kurt Lang...Helvetica Fractions is a known source of many font issues. It's really best to delete it from your hard drive and never think about using it again.
;~)

Similar Messages

  • How to wrap the text in column headers?

    Hi Friends,
    Can anyone please suggest how to wrap the text in column headers of a Java WebDynpro table?
    I believe that caption is the only UI element that a column header can have and it does not allow wrapping of the text.
    My original requirement is as follows,
    In a table I need to dynamically set the width of the columns according to the width configured by the user in some other view. All the columns of the table are dynamically rendered.
    Now what happens is when the user sets the width of the column to a rather low value, say 15 pixels, then the column is displayed like
    Supplier Catalog Name
    Sheila
    Catalog
    Name
    Dropdown
    As you can see it looks rather odd.
    Supplier Catalog Name is the header of the column and I use IWDCaption for header.
    Sheila Catalog Name Dropdown is the value of a particular row at the specified column. I am using a TextView as the TableCellEditor.
    I think what is happening here is that the framework wraps the text in the TextView according to the width specified (15px) and then the column width is extended because it can not accommodate the text (Supplier Catalog Name ) of the column header.
    We are using SAP NetWeaver Development Studio 7.0.12 as the IDE.
    I searched some forums and many people have suggested using scrollable columns but I don't understand how it will help in wrapping the text in a column header.
    Any help would be of great advantage.
    Thanks
    Amit

    Hi Deepti,
    Thanks a lot for the answer but the option that you have specified does not wrap the text. Instead it truncates the text being displayed and only the substring of the text which could be displayed in the given pixels is displayed.
    I need to show the whole text wrapped (Meaning if the width of the column is not sufficient then the text goes into the next line).
    Ayyapparaj,
    Thanks to you too for an helpful answer. It seems that the Netweaver has finally come up with a way to wrap the text in the column headers but as Manoj pointed out, I do not see the property headerTextWrapping  for a table column, Can you please specify which version of netweaver supports it?
    We are using SAP NetWeaver Development Studio 7.0.12 as the IDE.
    Thanks
    Amit Kapoor

  • A friend of mine sent 2000  texts as a joke. Now my phone reads his phone not as an iPhone. I was able to send iMessages before untill he did his prank. How do I get it back to where we can send iMessages again?

    A friend of mine sent 2000  texts as a joke. Now my phone reads his phone not as an iPhone. I was able to send iMessages before untill he did his prank. How do I get it back to where we can send iMessages again?

    Firstly, slap your friend across the back of the head. Secondly, Remove his number as "iphone" save the contact.
    have him send another iMessage (make sure it sends as iMessage not text) and it should register as his full number (XXX)XXX-XXXX. add that to "existing contact" as iphone, reply as imessage. should work.

  • No more text boxes in headers?

    I have several templates created in iWork 09 which have text boxes in the header or footer of the document. When I open them in Pages 5.0, the text boxes are completely missing, and I don't even get an alert that this element could not get translated. Is this a bug in the backwards compatibility of Pages, or has Apple devised a new way to insert text boxes in headers or footers? I can't seem to make it work, even in a new document.

    It is a stripped Pages version. Use your old Pages 09. You have it i the application folder > iWork.
    Only use the new one for simpler documents you need to save in the cloud. Be causes about which version you are using though.

  • Even editing text in Design View is now difficult in DW CC?

    Hi All,
    Even editing text in Design View is now difficult in DW CC? I just upgraded.
    It seems difficult - or impossible - to select, copy and paste multiple blocks of text from one place to another - unless you work in the Code View.
    Text blocks are separate entities, separately edited? I can't even copy and paste an image from one file into another.
    Previously, I'd regularly select an image - or a load of text - and replace it with some copied from elsewhere by 'pasting'.
    I must be missing something. Perhaps there's another mode of working.
    Thanks,
    John

    You're probably in Live View.
    CC2014.1 does some strange things when it comes to Live and Design Views.
    1. Design View is gone for Fluid Grid Layouts, so all editing has to be done in Code or Live View. There is a work around to get Design View back for those in Post #6 here: Editing Text and Adding Links Is Crazy in DW CC-2014.1
    You can also add your voice to get it back here: Provide "Design View" for Fluid Grid Webpages
    2. Design and Live Views are now a dropdown menu. Check the top left of your workspace, you should see Code | Split | Live with a small triangle next to Live. Click it to access Design View in everything but FGL pages

  • Texts received randomly has alerts now.

    Texts received randomly has alerts now. Been a week. On version 5.0.1 (9a405). Anyone have a solution? Thanks

    Sorry, let me be more clear.
    When I receive text messages, it used to have an alert sound for every received text, and a reminder that I set to repeat once. It was working fine until a couple weeks ago.
    Now, when I receive a text, it may or may not sound an alert.
    I would say about 1/3 of the texts I receive during the day do not make a sound, so I don't see them until the next time I check my phone.
    The vibrate/sound does not work either for the ones that make no alert sound.
    I have not seen a pattern yet.
    I have done the hard reset, chosen other tones, tried other settings... can't seem to make it work properly.
    Might be people texting from non-iphones? Might be people texting that in my contacts? Might be random? Can't tell.
    Thanks for the help.

  • Text subscripts/superscripts, headers and footers

    Actually I am a newcomer to Keynote. There are difficulties how to write in a text subscripts or superscripts. I am a physicist and need this feature frequently. I should be also grateful to get some help how to write headers or footers (i.e. for numbering of slides).
    Thanks in advance,
    Bernd
    G5   Mac OS X (10.3.9)  
    G5   Mac OS X (10.3.9)  

    Welcome to the forums, Bernd!
    To subscript or superscript some text, select it and type Control-Shift-Command-plus (or in the Format menu, under Font, in the flyout menu Baseline, choose "Superscript"). For subscript, Control-Shift-Command-minus, or again use the Baseline menu.
    To use a header or footer, you will need to put the text you want onto the slide Masters that you are using to appear on all the slides. To insert the slide number, select the Master you want, then in the Slide Inspector, click the Appearance tab, and check off the Slide Number option. You can now format the added number as you like.

  • HT201365 my text to send messages is now not working correctly after upgrading

    Since upgrading last week my text is not working  correctly it is very slow does not show the letter being used and takes seconds to be put in

    Looking into the Diagnostics and Usage Reports in 'Settings' -> 'General' -> 'About' I see nine different "ExcResource_MobileMail_DATE" reports. Looking at the report I see a SysInfoCrashReport that indicates that the CPU was pegged at over 50% (mostly over 75%) for over 180 seconds using the MobileMail app.
    I also see a "MobileMail_DATE" report that indicates that there was an 'Exception raised during monitored invocation of _loadMoreMessagesWithMaxVisibleIndexPath:maximumIndexPathsBySource:, exception: ** -[__NSArrayM objectAtIndex:]: index 4294967295 beyond bounds for empty array"
    And finally I see three "stacks+MobileMail-DATE" reports with "Power assertion timeout for 'com.apple.message.fetchMobileSynchronously...' Simply resetting it now." and "Power assertion timeout for 'com.apple.mobilemail.messagebodyloader' Simply resetting it now" reports.
    I updated to iOS 7.0.4 and decided to try and delete the account in my Mail settings and recreate it and set it to manual instead of the non-working fetch. Now, when I try to check my mail it still takes up to five minutes to respond, pulling the screen to refresh brings up the spinner for about one second and then disappears and no indications of activity occur until about three minutes later when I see the spinner in the status bar near the clock and then see a notification that it's downloading X of Y messages. At that point, message headers come in very quick and then about a minute later message previews come in. At random times, opening the mail app I get a "Password incorrect" error, even though the password works on other attempts.

  • Textbox shows xml text in working file but now when loaded into another SWF

    Hi all,
    I have downloaded an xml gallery (as2) as we needed one for an old as2 file. Now I mostly use as3 but thought as I only needed to tweak it there would be no probs. Of course, it rarely works out that way. The problem is, text loaded from the xml file is displayed with its corresponding image. This works fine in the file. When I load the SWF into another SWF however, it all works EXCEPT the text doesn't show at all?? Whoever made the gallery used 'device fonts' in the textbox, I don't know if this has anything to do with it. I tried changing the textbox to dynamic and embedding characters but still nothing.
    This seems the key line -
    _root.descmc.desc.htmlText = XMLdaten[number];
    I have also tried
    _root.descmc.desc.htmlText = XMLdaten[number].firstChild;
    This traces out the correct xml data when tested so it is finding it okay.
    Any help would be much appreciated.
    Thanks

    The problem might be in the use of the "_root"  You probably need to set _lockroot = true; in the loaded swf, otherwise the _root is that of the loading swf, not the loaded one.

  • When typing a text message my iPhone 4 now speaks some of the words as I type.  Where did this feature come from and how do I turn it off?

    When typing a text message on my iPhone, a voice now speaks some of the words.  Where did this come from and how do I turn it off?

    You have VoiceOver turned on.  See p. 230... http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf

  • How do I turn off the auto text "Can't talk right now...I'll call you later." when I cancel an incoming call?

    When someone rings me and I don't want to talk to them I cancel the call. With the new iOS 6 update my phone now automatically sends the caller a text that says "Can't talk right now...I'll call you later."
    How do I turn this feature off?? I don't want it!!
    Please help I've looked everywhere in my settings.

    Could you be a bit more specific?? Which settings?? "about 7 items down" doesn't really tell me much. What is the path?? I.e  settings>messages>etc,etc. as I said above I have checked all the settings.

  • Vertical text in jTable headers

    Hi,
    I have got a jTable with quite a bit of columns in it. Is there any way I can write the text - vertically in the header (first) row.
    Please let me know if you have got any suggestions.
    Thanks.
    halosys.

    I remember reading about it, maybe in the next Java version.
    You can do it yourself by creating for the column headers a TableCellRenderer.

  • Overriding text in table headers

    Hello,
    I am working on a document in CS3 where a table flows across several columns. I would like to set 2 header rows to appear in each column, however I wondered if it's going to be possible to have this but to override the text in one of the headers (it's the row style I want to repeat, not the text, which needs to say "blah blah blah" in the first column, then "blah blah blah continued" in subsequent columns)?
    Does anyone know if this is possible? I was hoping to avoid moving rows around as text in the tables is prone to change.
    Thanks for your assistance
    Cheers
    Deb

    Table > Table Options > Headers and Footers > Repeat Header: Every Text Column, and then check the Skip First button.
    This way you can set up the first column the way you like it, and then set up the second column the way you like all the rest.
    Ken

  • Just bought the ipad mini, and have the 4s phone. I have synced them, but my contacts did not sync with name connected to them, and I am getting texts on my new device now, but not my phone-what do I need to change?

    How do I delete photos from ipad mini? Also getting texts to my ipad that i just set up, but now not to my 4s. I have synced the devices, but my ipad has contacts listed without phone numbers. What do I need to change?

    go to your iPhone to settings>itunes and app store> check the box which reads automatic download apps.
    This provides for you to automatically download apps and music should you choose that option.
    Click on the area that reads 'use cellular data when automatically downloading'
    Good luck.

  • How do I get rid of blurred text happens all the time now in Firefox web browser?

    Even when I was registering for this forum the text was blurred and multicolored sometimes. Its very annoying and hard to see. This is all the time with Firexfox. Chrome and IE I have no such issues.
    Also when I was taking an assessment test for a job application none of the answers took and I was told by the program that it was probably my browser. I used to use IE and never had any of these issues but changed to Firefox as I was informed that the security was better. All these issues have been frustrating to say the least.
    Thanks, Rita

    Many site issues can be caused by corrupt cookies or cache.
    * Clear the Cache
    Press the '''<Alt Key>''' to bring up the tool bar. Then;
    '''Tools > Options > Advanced > Network > Cached Web Content: Clear Now'''
    and
    * Remove Cookies
    Press the '''<Alt Key>''' to bring up the tool bar. Then '''Tools > Options > Privacy.'''
    Under '''History''', select Firefox will '''Use Custom Settings'''.
    There is a button on the right side called '''Show Cookies'''.
    If there is still a problem,
    '''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''''' {web link}
    While you are in safe mode;
    Press the '''<Alt Key>''' to bring up the tool bar. Then
    '''Tools > Options > Advanced > General.'''
    Look for and turn off '''Use Hardware Acceleration'''.
    Poke around safe web sites and see if there is still a problem. Then restart.

Maybe you are looking for