Text in PI Sheet and Process Order did not match

Dear Sir,
We are going to upgrade to our system from 4.7 to ECC6.
We have a problem with PI Sheets with the Long text. The text instruction shown in the PI sheet is not matching with the long text put in the Process Order and Master Receipe.
We are using the Process Instruction Category "INST" and we are puting long text for instruction for this in the Master Receipe. At the time for creation of Process Order this Process instruction Category fatch correct value of long text from the Master Receipe after released the Process Order, Control Recipe generated for the same Process Order. But when we are going to process these Control Receipe from the T-Code CO60, We find the some different text for the "INST".
This problem is not for one Material and Plant Specific.
Thanks and Regards,
Gaurav Kumar
Application Consultant SAP PP
Mobile +91 9971003631

Hello Gaurav,
There might be another possibility, make sure if you make any changes in the Control Recipe Destination program or user exit to populate the long text while sending the CR to the destination to reflect with the PO/Master Recipe.
with best regards
K. Mohan Reddy

Similar Messages

PR item text to be updated on Process order release

Hi Experts,
The scenario is mentioned below :
The purchase requisitions would be created on the release of PRocess order.
My requirement is to update the item text of the Purchase requisition ( with the process order data such as BATCH & Material ) on release.
I have already tried quiet a few user exits, but beacuse the PR number is not yet generated in these exits,hence I cannot use create_text or save_text.
Please let me know if someone has any idea on how this can be solved.
Hoping for a quick response.
Warm Regards

Hi
Check the exits related to PR for Process order
COZF0001
COZF0002
Try to fetch the Long texts of the PR's using the READ_TEXT and use the fun module
CREATE_TEXT for saving the same in Process order by using the Right parameters like OBJECTName,ID,OBJECT and LANG in bothe cases for PR and process order.
The tables link between the PR and the order is
AFKO-AUFNR = EBKN-NPLNR ( process order number) in PR account assignment table
use this link and try to save the text as mentioned above
Reward points if useful
Regards
Anji

Sample Preshippment information in PI Sheet or Process order confirmation

Dear Gurus,
We are using the strategy 40. We need some information on sample sending procedure like preshipment or coshipment and quantity of delivery to the process order PI sheet to identify the production team to keep the sample ready before confirmation or receipt of the process orders.
It is sepcific to some customer or material.
Could you please help me how to configure / flow information from sales order or Material to PI sheet or process order confirmation.
THanks in Advance
Srini

Hi,
Process Massage will generate only after Completing the PI sheet.So after maintaining the PI sheet you have to press Complete button then only system will generate Process Massage regarding completion of PI sheet.
But if you leave the PI sheet only with Save then it means still there are some entries are left or may be change.So in this case system will not generate process massage.
Now first complete the PI sheet then check in CO54 with correct date , time and plant selection.Send it from here and then check in process order.
Regards,
Dhaval

Get the supply source of planned order and process order.

Hi experts,
I would like to display production version (supply source) on prduct view.
But, I don't know that how to get supply source of planned order and process order.
APO table is complax.
Do you know that?
Regards,
Satoru

Hello Tushar,
Are components also plan in APO with MRP type X0?
Does PDS or PPM contain all the components?
Verify if the component is maintained properly in the PDS.
Check whether there is an active integration model for the components, also execute the RAPOKZFX report for all the materials in question.
When you convert the PPDS order to process order then conversion happens in ECC/R/3 system. This is the place BOM has to be reexploded in ECC. Please check if you have any enhancement which restrict BOM explosion.
Also check OSS note 1576703 suggested by an expert Caetano.
Best Regards,
R.Brahmankar

I juste got this and i order the os x 10.8 and they told me this cant work on my mac and u guy did not tell me that befor

i just upgrade my mac from os x 10.6.8 to 10.7.5 and now order the 10.8 to install it u guy tell me that system can use for my systeme it ask , me for features . and u guy did not tell me noting about that before can u guy s help me cause i allready order it and i have the software

We didn't tell you anything. This is a user forum. Not to mention the fact that according to your profile, this is the only post you've ever made here.
What model mac do you have? EXACTLY?

Process 000004 did not confirm within the permitted time period

Hi
The process chain failed while activating the ODS with an error message :Process 000004 did not confirm within the permitted time period" . When repeated the failed step it went successufull. but want to know what can be the cause and steps to be taken in order to avoide this issue further.
Thanks
Ratan

Hi,
Whenever ODS activation goes there'll be some batch processes you can say as parallel processes running along with main job. Due to unavailability of resources i.e either bkgd or dialog processes soemtimes gets delayed and they gets canceled which leads to the failure of main ODS activation job...
may be in ur scenario the same thing might have happened, so when you had repeated the step if the resources are free it will be successful.
once chk in your system for canceled jobs, ther might be some job which relates to your process.
rgds,

Process order should not take part in MRP run

Hello Colleagues
I looking for a way how to exclude not released process orders (we have PP-PI) from MD04 report. Not released process order should not take part in MRP run. I was trying to do it using OPJJ for availability check 02 and checking rule PP but I was not able to get result. Could you please help, probably there are other settings?
Best Regards
Eduard

Hi,
Settings in OPJJ will take effect only when you create or release process orders.
As a work around you can try to exclude process order is
1. Create a Storage location and make it not relevant for MRP-OMIR
2. In Material master for the material in MRP assign storage location MRP as 1 (exclude storage location stock)
3. Create the process order, in the GR tab enter the storage location (not MRP relevant)
In the MRP run it will not take the process order into account.
After releasing change the storage location to the normal sotrage location.
In this process flow, the control is with the storage location.
Check it in your sandbox.
Thanks,
JK

Phases/operation in process order does not exist

phases/operation in process order does not exist this error coming when cor6n is using.why?

HI
After creating Master recipe in C201, under the operations tab you need to define the operations involved in recipe . along with the operation column there is phase indicator column is there which is to be selected whether this operation is phase or not...
Check and revert
Regards
Anupam Sharma

RAC instance won't start: ORA-00443: background process "VKRM" did not star

I've logged a SR with Oracle, but while waiting for response from them...I'm stumped I can't find more out here about this article.
On Oracle knowledgebase...any search for VKRM, gives about the same 3 articles relating to RDA (Remote Diagnostic Assistant).
Not sure what went on here.
I have a 5 node RAC cluster. All other instances seem to be running just fine.
On one instance...some applications were getting an error like:
ORA-01033: ORACLE initialization or shutdown in progress
I looked in GRID...and it indicated that only two of the 5 nodes had this instance running...which was strange in that with srvctl, it showed ll 5 up and running:
[oracle@server2 bin]$ ./srvctl status database -d INSTANCE
Instance INSTANCE1 is running on node server1
Instance INSTANCE2 is running on node server2
Instance INSTANCE3 is running on node server3
Instance INSTNANCE4 is running on node server4
Instance INSTANCE5 is running on node server5
Anyway, thought I'd poke around. I started with trying to get srvctl to stop instance #2...in GRID it seemed that instance 2,4 and 5 weren't working.
srvctl stop instance -D INSTANCE -i INSTANCE2
This just hung...
I thought I'd cycle all the nodes...so, did a ctl-c out of that one, and did:
[oracle@server2 bin]$ ./srvctl stop database -d INSTANCE -o abort
PRCD-1124 : Failed to stop database INSTANCE and its services
PRCR-1065 : Failed to stop resource (((((NAME STARTS_WITH ora.instance.) && (NAME ENDS_WITH .svc)) && (TYPE == ora.service.type)) && ((STATE != OFFLINE) || (TARGET != OFFLINE))) || (((NAME == ora.instance.db) && (TYPE == ora.database.type)) && (STATE != OFFLINE)))
CRS-2675: Stop of 'ora.instance.db' on 'server5' failed
CRS-2675: Stop of 'ora.instance.db' on 'server4' failed
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
The ORA-01034 messages repeats a number of times...and the one with server4 and server5 repeated again too.
I also got this:
CRS-2680: Clean of 'ora.instance.db' on 'server2' failed
CRS-2675: Stop of 'ora.instance.db' on 'server5' failed
CRS-2675: Stop of 'ora.instance.db' on 'server4' failed
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
I get similar messages when I try to restart.
clusters seem to be up, and other instances seem to be ok
Looking at alert log...I found some strangeness in the traces
Starting background process VKRM
Errors in file /u01/app/oracle/diag/rdbms/instance/INSTANCE2/trace/INSTANCE2_dbrm_26982.trc:
ORA-00443: background process "VKRM" did not start
Errors in file /u01/app/oracle/diag/rdbms/instance/INSTANCE2/trace/INSTANCE2_ora_27467.trc:
ORA-00450: background process '' did not start
Errors in file /u01/app/oracle/diag/rdbms/instance/INSTANCE2/trace/INSTANCE2_ora_27467.trc:
ORA-00450: background process '' did not start
Error 450 happened during db open, shutting down database
USER (ospid: 27467): terminating the instance due to error 450
LGWR waiting for instance termination
Instance terminated by USER, pid = 27467
ORA-1092 signalled during: ALTER DATABASE OPEN...
opiodr aborting process unknown ospid (27467) as a result of ORA-1092
Looking at the trace listed above:
2011-05-09 12:17:18.305726 :84271119:db_trace:ksb.c@2157:ksbs1p_real(): [10254:6:464] KSBS1P: process DBRM trying to start background VKRM
2011-05-09 12:17:18.305729 :8427111A:db_trace:ksb.c@2220:ksbs1p_real(): [10254:6:464] KSBS1P: process DBRM obtained PR enqueue to start background VK
RM
2011-05-09 12:17:18.306021 :8427111D:db_trace:ksb.c@2354:ksbs1p_real(): [10254:6:464] KSBS1P: creation error posted OER(1089)
2011-05-09 12:17:18.306029 :8427111F:db_trace:ksb.c@2424:ksbs1p_real(): [10254:6:464] KSBS1P: out of loop: process did not start
Trace Bucket Dump End: default bucket for process 6 (osid: 26982, DBRM)
ORA-00443: background process "VKRM" did not start
kskdbrmpa: reply error 450
Any ideas? Again...I can't seem to find much of ANY information searching out there for the VKRM background process not starting...
Thanks in advance,
cayenne
Edited by: cayenne on May 9, 2011 11:34 AM

Anyone? Anyone? Bueller?
Ok..have been on phone with Oracle support, and have them stumped so far.
I've checked..other instances are running (except one other that failed to cleanly shut down with srvctl and same error messages).
I've check...ASM is running on all 5 nodes. I've used crsctl to check CRS on all nodes..clustering seems ok.
Memory while somewhat high...should have enough room...the system has never complained before, and this has been up on this config for over a year.
I was able on node one...to fire up the first nodes instance using the pfile there...it came up. I started it restrict..and promptly ran a datapump export, and then shut back down.
While Oracle support is going through logs and trace files I sent...I've got another 11Gr2 environment (3 node RAC) I've been using as a test environment...and am recreated the instance there temporarily to allow my developers to test and get past the upcoming deadline.
But, I'm still puzzled as to the solution on the main cluster. This seem to be normal, except these two instances....
any ideas on where and what to look for?
cayenne

While I was talking via land line to land line with a friend they recieved text message from my iphone that I did not send. How is that possible?

I repeat. While I was talking via land line to land line with a friend they began recieving text messages from my Iphone that I did not send. I am in the middle east and I was calling a land line in Mexico but that should not have mattered. Moreover, the person I was speaking to told me they had gotten other text messages from me that know I never sent. I called my phone company (AT&T) and was told the problem was not with the system but with my Iphone. They suggested someone was using app that mimicked my phone number. Is such a think possible?

In addition to my iphone I have an itouch. I only just today created an appleID so that I could use this message board so it seems unlikely that the problem is the result of a misused ID

Dashcode is not working in Mountain Lion. I tried updating to Xcode 4.4 and it still did not work . . .

Dashcode is not working in Mountain Lion. I tried updating to Xcode 4.4 and it still did not work . . .
I use dashcode for most of my coding needs, so it is very important to me!

I have the same problem too. dashcode shows up in the finder but its just a question mark (see screenshot). Anyone found a way to address this?
Thanks!

I just bought an new ipad mini with wifi and cellular. Is there any way to send text messages to people and contacts that do not have iphones such as friends with blackberrys or a samsung galaxy smartphone.

I just bought an new ipad mini with wifi and cellular. Is there any way to send text messages to people and contacts that do not have iphones such as friends with blackberrys or a samsung galaxy smartphone from this ipad. Everytime I try to send a message to a person that does not have an Apple product ( Iphone or Ipad ) it comes up saying contact is not registered for iMessage and wont send it. I can only send them a message from my iPhone 4 instead. Do I have to install a new App from the App store to send these non iMessage cell users a message?

FYI
Complete guide to using iOS 6
http://howto.cnet.com/ios-6-complete-guide/
Guide to Built-In Apps on iOS
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
http://www.youtube.com/watch?v=YT2bD0-OqBM
http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
 Cheers, Tom

My files, photos, email files, software programs, and all information did NOT transfer over to Mavericks (from Mt. Lion). How do I get all my stuff to appear when using Mavericks?

Will someone please help me?
My files, photos, email files, software programs, calendar info, and all information did NOT transfer over to Mavericks (from Mt Lion). How do I get all my stuff to appear when using Mavericks?
My email did transfer over.
Thank you.

First click on the Apple > Logout and Log back in or restart the unit see if that solves it. If it doesn't do you have a backup of your system prior to upgrade? Check Disk Utility and see how much space is being used to make sure the drive wasn't somehow erased.

HT1338 I upgraded to 10.6.8 and my imagecapture did not upgrade. Why? Do I have to buy a new verson? Where is new version? tia

I upgraded to 10.6.8 and my imagecapture did not upgrade. Why? Do I have to buy a new verson? Where is the new version located?
Thanks. I cannot access the imagecapture from my builtin camera now. I have a MacBook-5 years old. Thanks.

OK. Here. This message is on the front-"NO camera or scanner connected." But when I wanted a picture in Facebook to use the camera the camera turned on and worked a-ok. Why?
I can't click on 'devices' or 'shared' because they are not live.
So what's going on?
Thanks.
Dan

I recently updated my iphone software to 6.0.1 and my ringtones did not get added back to the phone. I have connected my phone to my pc to sync but when I click to sync, it does nothing. How can I get my ringtones back on my phone?

I recently updated my iphone software to 6.0.1 and my ringtones did not get restored. The ringtones are lised in my library but I can't get them added to my phone. When I click on the button to sync my phone, it does nothing.

Welcome to the Apple Community.
Try unchecking the tones and syncing, then re-checking them and syncing again.

Text in PI Sheet and Process Order did not match

Similar Messages

Maybe you are looking for