Text inside the portlet is cutting off

I have a process portlets and the text inside the portlet is cutting off. For example, instead of displaying the name of the process "Certificate of good standing" I get "Certificate of Goo..." How can I make the text wrap or show the full project name. I try placing the portlet in a full page, but it's still dose not fix it. Anyone know where it can be change?

Here is the solution that I got from puspendu
And it worked:
From your question , I am assuming you are using the ALIP version of the BPM. The portlets UI are designed to only display that many characters for the application name and display the full name as html title field.
If you really want to change you can go to the application.jsff file under ptjsp folder and change to display the applicaiton.name instead of applicaiton.shortname.
----------------

Similar Messages

Text to the right is cut off on print/preview of web pages

To the WebMaster's of oracle.com
I' still like to print out information from your web site about hot topics (like your recent articles about BPEL), so a long flight will get more interesting..
However the text to the right is cut off when printing (using IE6 on WinXP). It seems that the formatting requires a minimum width.
I would also prefer to see the "print view" link at the top of an article and not at the bottom.
With best regards from Germany,
Stefan

Stefan....this problem sometimes occurs with articles containing wide code samples. Can you please provide the specific problem URLs?
We are aware that the "Print View" functionality is less visible than it could be; unfortunately, moving it to the top of the page isn't as straightforward as it seems. We're working on it.
Cheers, OTN
This problem should now be fixed in the three BPEL Cookbook installments.
Message was edited by:
jkestely

Error displaying .png image inside the portlet

Hi all -
I am having an issue with the remote portlet displaying a certain image file, i.e. .png is not showed up inside the portlet. If someone had dealt with this issue and know a fix, please share that information. THX.
A simple test war was built and deployed to the WebLogic server with two embedded images, one GIF and another PNG, and in Webcenter ALUI 6.5 a remote portlet/webservice were created to display the image files. The portlet only shows the .gif image and not the .png image?? I am not sure what the issue is with the portlet??

I am faced with the exact same issue: .png is not showed up inside the portlet. Removing the prefix URL gateway for the portlet web service would work.
However, in my case, my system is sitting behind a gateway to ensure a secure connection. I can NOT remove the prefix URL gateway on my system. It appears the problem is, if the portlet web service is prefix with a URL gateway, the PNG fie is delivered to the browser with the wrong MIME-type ("text/html" instead of "image/png").
My web service is deployed on a WebLogic container. Is this a configuration issue in AquaLogic/WebCenter Interactions?
Any help would be greatly appreciated. Thanks!

I am trying to play cafe world and the screen is cut off so i can not play

i am trying to play cafe world and the screen is cut off so i have half of a screen so how do i make it larger so i can play of i will have to go back to explorer

Please do the following:
* Update to Firefox 29 [[Update Firefox to the latest version]]
* [[Remove recent browsing, search and download history]]
Also, I strongly suggest updating to Windows 8.1 update 1 as plain old windows 8 is no longer secure or stable.

HT1918 When I try to download a free app after log in the iTunes gets cut off with a msg update security question where do I do this?? I can't download anything

When I try to download a free app after log in the iTunes gets cut off with a msg update security question where do I do this?? I can't download anything

If you have a credit card on file on top of your gift card then it is asking you to confirm the security code for the card, which for a Visa or MasterCard is 3 digits located on the back, or AMEX has 4 digits on the front. This happens just to ensure that you are the account holder, and would happen from time to time whether it was a free or paid app, even if you have a credit through your gift card. This doesn't mean that your credit card will be charged.

Please help i started my project video format 720HD resolution 12x720 rate 25p at last when i finish and burn to dvd the edges are cut off any one help please i am really in trouble

please help i started my project with video format 720HD, resolution 12x720, rate 25p. at last when i finish and burn to dvd the edges are cut off and my logo cut off the screeen aswell any one help please i am really in trouble. thanks

Sorry, but I don't know anything about that app.
I did go to their Web site and I see they have a support link. Perhaps you can get help there or in their forum.
If you are OK with a DVD with a basic menu, you could try the Share>DVD option in FCP.
Good luck.
Russ

I just bought the new HDMI cord for the IPad, it works good but a small potion of the TOP and the BOTTOM is cut off. It doesn't seem to do it for movies. My monitor is a 23 IN' acer s series.

I just bought the new HDMI cord for the IPad, it works good but a small potion of the TOP and the BOTTOM is cut off. It doesn't seem to do it for movies(although I can't really tell. My monitor is a 23 IN' acer s series. I just installed the drivers for my monitor with no change. I think I have a CD somewhere for my monitor maybe it has some kind of program in there that can help me. I can post a picture if I need to. Thanks

No work around that I know of.
Apple Feedback http://www.apple.com/feedback/

After burned to dvd the edge are cut off in my tv screen. looks like zoomed

hi
i am FCPX user. i create my project using format (resolution )as showed on the pic below
after burned to dvd the edge are cut off on my tv screen. looks like zoomed as showed in the pic below.
thanks for taking ur time to help me!!
then i export using master file as
showed on pic below
and after i burn on to dvd my edge are cut off. here pic trying to show before burn on my mac and after burned on to dvd
before burned on to dvd on my iMac screen
AFTER BURNED ON TO DVD ON MY TV SCREEN
i really need ur help thanks
after burned to dvd the edge are cut off in my tv screen. looks like zoomed

Thanks Alchroma
i used this dvd burner just incase..
but i thought i might have wrong settings from begning.
do u thinik this setting is alright when creating DVD
Alchroma wrote:
That thought jumped into my head as well.
If the Safe Area settings are OK then it's well a settings issue in either the DVD player or TV or both.
Al
Alchroma wrote:
That thought jumped into my head as well.
If the Safe Area settings are OK then it's well a settings issue in either the DVD player or TV or both.
Al
thanks again

Images at the bottom of the screen are cut off in HDR Pro

I'm running a Mac and have recently installed CS5. When I open files to do an HDR, the photos used in the HDR are cut off at the bottom of the screen. In other words, what I mean is, they should be able to be selected with the check box is being included or not. Also, the "OK" and "Cancel" buttons are cut off. I thought that perhaps it was the screen resolution or perhaps the dockeed icons below. Yet, I'm using the highest screen resolution and that's not a factor. I've hidden the dock,moved it...no difference. I've tried resizing the HDR window but it only resizes horizontally - not vertically.
This is frustrating. I'd like to be able to see the entire images being used in the HDR pro and decide whether to include them (or not) by the check boxes; especially since this is how it's supposed to work. Any ideas?

Hi Charles,
Until just now...it didn't work. Isn't that how it is...ya ask for an answer for something that's broke...then it works.
When it wasn't working...the Green maximize button didn't do much except allow me to pull the window down further. Once I would try to resize the window from the resize section at the bottom right, the window would resize to full size...not much good.
Although...for whatever reason, it seems to be working now. Will it work tomorrow? beats me.
Thanks for yoru help.
Tony

Why does the menu get cut off even if the project is widesrcreen?

I made a widescreen project in iMovie, exported it to iDVD, and chose a widescreen theme. It looked fine on my computer but when I burned it and played it on my home DVD player, the words were cut off. I also noticed that when played on some TVs, my movie (although widescreen) played as full screen and therefore, cut off some of the footage. Does anyone know how to fix this?

HOW TO MAINTAIN 16:9 ASPECT FROM IMPORT TO BURN
This is the way I do it. There is no compulsion on you to do it my way, but this works (for me). I started this method before iMovie and iDVD were upgraded to 6.0.3, and because not all elements of the various iDVD themes (particularly the pre-iDVD 6 ones) are consistent in keeping to 16:9 throughout the process.
The widescreen preview works just fine when you check your finished project within iDVD. The problem only happens when you either burn a project or save it to an image.
A bug in iDVD 6, particularly when working with PAL, and which has been reported to Apple, is that the sub-menus in many of the themes (the chapter settings) default to 4:3 aspect, NTSC and mpeg 1, instead of the desired 16:9 in mpeg 2 in PAL. This may be partly a leftover from iDVD 5 or even a newer ‘feature’ of iDVD 6. Either way, it is annoying when it happens, and we must hope Apple cure it in iDVD 7. In the meantime here is my failsafe workaround, which sounds a lot more complicated when reading about it, that it is in practise.
Living in the UK, I use PAL (25 fps). Wherever you see a reference to PAL (25 fps) in the following you may substitute NTSC (30 fps) in the various settings mentioned (if you don’t live in Europe), the basic idea is the same. I still use this method, and take these steps, regardless of whether it is always necessary. Worst case scenario: it would have worked anyway. Best case scenario: it works perfectly where it otherwise wouldn’t!
The object of the exercise is therefore to ‘fix’ all constituent parts of the project (video, titles, theme, effects, even audio!) in the desired 16:9 aspect to avoid producing a DVD where the movie is in 16:9 and the menu is in 4:3 or where other irritating surprises lurk in your project, which you only discover after burning a coaster!
First go to http://www.mydvdedit.com/index.php?lang=english and download myDVDedit. This is shareware although the download is free. Send the guy a few dollars/euros, he deserves it. While you are there, read all about it. Now install it in your Applications Folder. You will need it later.
You have finished your iMovie project with music, transitions and so on, and saved it to you Movies Folder. Before you started the project you naturally set it to DV Widescreen.
Open iDVD. Give the project a name, and save it as Widescreen if it didn’t default to the same aspect as your iMovie project. Now import the iMovie project into iDVD, choose a theme (any theme you like, even if it prefers to stay at 4:3) and save the project. Do what you would normally do to the theme and its drop zones. Save the project.
Now save as Disk Image on your desktop. Leave it there for the moment when it has finished/appeared.
Open your Movies Folder. Create a new folder. Name it PROJECTNAME – TS FILES (where ‘projectname’ is the name of your project!). Close the folder. You can of course call it anything you like, but this aids identification.
Now double-click the disk image on your desktop. It contains two folders: AUDIO_TS (which is empty, but please pretend that it isn’t) and VIDEO_TS. Drag and drop these to the folder you created in your Movies Folder. (This takes a moment).
Click on the AUDIO_TS folder and go to Get Info in the file menu. Right down the bottom is where you have to change the permissions. Under ‘Ownership & Permissions’ change this from Read Only to Read & Write. Click the small triangle next to Details, scroll down and click on ‘Apply to enclosed items’. You will be asked for your root password. Close the get info window, and now click on the VIDEO_TS folder and do the same. Close the Projectname-TS Files folder. You have now allowed yourself to change the properties of the contents of those folders, which leads us to the next all-important step.
Open myDVDedit. Go to File and open the projectname TS Files folder. By all means stare at it shock and awe, but don’t bother finding out what it can do, except for the following:
Top left you fill see a list of files. Lower centre you have a large window. On the vertical menu to the left of that, click te middle one (VTS or VMG).
In the window at the top left, ignore ‘First Play’ (if there was anything to correct in that, myDVDedit will have done so and told you).
Click on VMG Menu en (English). Now the whole thing springs to life.
Set Coding Mode to MPEG-2 (if it isn’t already)
Set Standard to PAL (or NTSC if that is what you want)
Set Aspect to 16:9 (not any of the other options)
Now save the file.
Click on VTS Menu 1 en (English) and repeat as above.
Click on VTS Menu 2 and repeat as above.
You have now permanently ‘fixed’ the entire contents of the TS folder (the disk image) in 16:9 aspect. Close myDVDedit – you won’t need it again until the next project!
If you have Toast 7 Titanium, open it. ‘Select DVD-Video from VIDEO_TS’. Choose Select from the main Toast window and select your projectname-TS Files folder. You are now ready to burn! You can set the burn speed (2x recommended) before the burn commences. Allow Toast to verify the burn before you eject the DVD-R disk.
If you don’t have Toast 7, then I assume you can burn the projectname-TS Files folder (disk image) via Disk Utility. I say ‘assume’ only because I have never tried it that way.
Either way, you now have a DVD which will play as 16:9 widescreen on any TV set, even the old ones where you can’t ask it to letter-box.

Problem in displaying text inside the item label - JFREECHART

Hi All,
I dont know whether this is the right place or not to post the queries related to jfreechart here .
I am facing a problem in displaying the text inside the item label in jfreeChart. I am trying to print the text in 2 lines one below the other at the top of each bar in waterfall chart.
Please find the code below in next post. The problem i am facing is it is neglecting the new line character . If any one knows how to display the text one below the other please help me out .
Thanks in advance .
Regards,
Diw

i am facing the problem in pasting the complete code as its exceeds the message text limitiation, please find the link below for the code .
http://www.java-forums.org/java-2d/12087-problem-displaying-text-inside-item-label-jfreechart.html#post36648
Early response will be appreciated . Thanks in advance
Regards,
Diw
Edited by: Diw on Sep 30, 2008 11:15 AM
Edited by: Diw on Sep 30, 2008 11:16 AM

I am using Acrobat Reader 11.0.10 . I cant print mixed originals and also I cannot print letter size correctly . printing of first two pages ok but the rest gets cut off at the top

How can I print from MAC with Acrobat Reader. I can't seem to get it to print correctly , first two pages of letter size works ok after the remaining pages get moved up and the printing is cut off.

I arrived here looking for a solution! And while reading your post the penny dropped that I didn't have a serious problem. I have a booklet of 112 pages and all I needed to do was re-order the pages as printed so that 1 is followed by a sheet with 2 on the under-face but same side and so on. The pages had printed back to front and needed flipping. But then I have a duplex printer and maybe that makes a difference. Is it to do with your manual duplexing and the order that the second pass is presented to the printer. As my duplex sheets effectively needed flipping over each one I'm wondering if you can solve your problem with a little experimentation and re-ordering before your second pass.

Options screen opens so big the top is cut off and cannot use

This recurs and cannot fix.
The options screen(box) opens so big the top is cut off and cannot access anything but the general screen?
I have my resolution set to native 1600x900 100%. Decreasing page (home page) size does not help.
I am running Windows7 on NEW COMPUTER.

It does it in safe mode as well. It does it intermittently so I can't trace it to an extension.
TY

How can I center the chart inside the portlet?

Hi,
I created a bar chart and published it as a portlet.
The chart is left-positioned inside the portlet which doesn't
look good. How can I center it?
Thank you in advance for your help.

Hi,
There is no way of centering your chart within a portlet.
Thanks,
Anu

May I know how to change the color of texts inside the indicator box?

Can anyone tell me how to change the color of texts inside the indicator box? I have tried to use property node but not really know how it functions.
In fact, I am writing a program for which the number inside indicator on front panel will show red color if the measured value can't reach the requirement. I am using LabView 6.1 Professional
Thank You for your attention!!!!!!

Simply use a property node with "NumText.TextColor" and wire the correct color depending on your test result.
The attached simple example (LV 6.1) lets you change it from the front panel. In your case, you would use your test output instead of a FP switch, of course. Message Edited by altenbach on 05-25-2005 09:05 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
TextColor.vi ‏18 KB

Text inside the portlet is cutting off

Similar Messages

Maybe you are looking for