Text is displayed as an image?

Hi all. I know absolutely nothing about web design, but tried to build my own website. The text seems to be flatted to an image? Why is this? How can it be displayed properly (you can highlight text etc in the browser).
Here is my site (under progress). www.spectrafilms.co.uk
I also need to make the page width bigger, but whenever i do it, it just extends one side. Is there an easy way to increase the size of all my pages whilst keeping everything centred?
I really hope i can get some help here... it would be very much appreciated! Also any feedback on the site itself will be greatly valued.
Many thanks

I believe you have used system font or applied effects which would convert the text into image on export. I would suggest you to use web safe font and then export which will resolve this issue.
More details : http://helpx.adobe.com/muse/using/typography.html
Regarding center position of contents in page , you can use Pin feature and pin the objects on page.
More Details : http://helpx.adobe.com/muse/using/objects.html
Thanks,
Sanjit

Similar Messages

*** Can't get my text to load as text - still loads as an image

I have an iWeb site I've done and I'm still having trouble with some of my text being displayed as an image. This is an issue for me because it is slowing down the loading of my site.
I have 1 page where I converted the text to Georgian and it loads quick (text is loaded as text and not an image). I have another page on my site that also has all the text as Georgian, but it is still loading the text as an image.
Why could this be happening? What are some trouble-shooting tips that people may have to make sure that web-formated (web font) text appears as text.......any suggestions?
Thanks in advance!

Using the 'TextEdit Passthru' technique will generally resolve text to image problems:
Copy the text you want.
Paste it into a new TextEdit Document.
Format > Make Plain Text.
Copy the text from TextEdit.
Paste it into iWeb at the desired location.
Reformat within iWeb.
Michael
iMac 20" Intel Core Duo 2GHz

Img alt="text" not displayed when images are turned off in Safari

I have tried to search this, but every search has returned too many posts, so I apologize in advance.
Have I made some error or is there an issue with my Safari? For some reason my Safari does not display alt="text" when images are turned off?
This is what is supposed to happen (see http://www.w3schools.com/tags/attimgalt.asp) and it works fine in my other browsers (Opera, FF), but with Safari I get nothing - no image, no alt text, no indiciation that an image is supposed to be in that place. According to w3c, Safari is supposed to be compliant.
There is no problem with the site itself, I am designing the site and test with and without images to see how it degrades. As I said, it works properly in Opera and FF - the alt="text" text is displayed in place of the image - but not in Safari.
Is this just my Safari? How do I fix this if it is?
Is it Safari in general? If so, how do we get it fixed, because this is clearly just not correct?

It's not just you. I see the same thing in my Safari. It appears to be a Safari problem, in which case the best thing to do is submit feedback to Apple's developers via the Mac OS X feedback form. (You will not receive a response, as that page notes, but the feedback will get to the people who can use it.)

Help with SWFObject2, problem with display of alternate image

I'm trying to use SWFObject2 dynamic publishing version to test the visitors browser for flash pluggin and the version.
I want to only show my flash image if the browser finds the flash plug in and it supports the correct version of flash for my banner, otherwise I want to display a jpeg image in its place.
When flash support is available in my browser the flash image is displayed, no problems. But when Javascript or flash plugin support is not available and my alternate image jpeg is displayed something wierd happens and i would appreciate any help on this:
The image is displayed but is pushed to the right of the screen and it seems to have a box behind the image, the edge of the box is only visable and changes colour on rollove like it wants to be clicked, obviously i cannot see what the box is because the image covers it. There is nothing wrong with my image, i put that in place first and tested it loaded ok before i added the SWFObject code and file.
My code is below:
<script type="text/javascript" src="Scripts/swfobject.js"></script>
<script type="text/javascript">
swfobject.embedSWF("advertise_banner.swf", "altContent", "468", "60", "6.0.0", "expressinstall.swf");
</script>
</head>
<body>
<div id="wrapAltContent">
<div id="altContent">
<a href="advertise_banner.php?ad=y">
<img src="Images/advertise_banner.jpg" alt="Image linking to information on advertising a banner ad on Choose Almeria" />
</a>
</div>
</div>
Looking forward to replies.

Hi,
Is this your question still relevant? If yes, did you study already this for example?
http://code.google.com/p/swfobject/wiki/documentation
Hans-G.

Unable to display a PDF image on the page - Mac 10.6

Hi,
Running an iMac with 10.6.8 and Indesign 5.0.4. Just wanting to export a PDF as per usual via File > Export function. However, I keep getting the error message, "Unable to display a PDF image on the page'. No idea what this is and have never seen this error before. The only info on the internet reveals error code 0x2511(9489).
I've deleted prefs, closed down and re-opened Indesign and even restarted the computer. I've also re-linked the images contained in the document and even created a new document and set it up the same, but still the same problem. Investigating further, other Indesign documents still export properly.
The only ones that don't export are 2 documents, both giving this same error message. Both documents are ones where a client has sent a PDF, I've imported into two of these into an 2-page A4 Indesign document (each PDF is 48MB each) and then just added a text layer (using Times) which is properly installed on the computer. I basically have to 'update' course dates for the client and add PDF to the website, all very basic.
I've tried importing a jpeg and other PDFs into the file (replacing the existing ones) and they export fine.
All my software is legal and I've exported this document before now in exactly the same File > Export without any problems (under 10.5 and 10.6).
OK... I've just imported the offending PDFs into Acrobat, optimized and shrunk the file size, re-imported back to Indesign and the PDF export works fine. So it seems InDesign / PDF Export doesn't like large imported PDFs? I think they were originally exported from Publisher, so maybe that's the problem or a file conflict somehow.
Any ideas on the culprit? I've googled it, searched these forums and Apple discussions and haven't found anything. Although I've found a workaround, I do get large files to import and then export. Thanks for any help
Steve

It does sound like a problem with the original PDF files the client sent you. You can check how they were made in Acrobat Pro from the Additional MetaData button on the Description tab of the document properties dialog. It will be under Advanced at the bottom of the list when the metadata opens.
You might be able to salvage them by running the optimzer and not changing the size, or just doing a Save As in Acrobat.

Image path displays instead of image

Firefox v20.0.1, Win7 32 bit.
This web page ( http://zone.ni.com/devzone/cda/epd/p/id/5336 ) does not display the "flowchart"image at the bottom of the page immediately following the text "The following is a map of other documents..." On a correctly working page, the image is a flowchart "navigation" image that opens new pages depending on where you click on it. In firefox only a box with an ftp path to the image is displayed in its place. I have seen the problem on other web pages as well.
Actions taken:
The pages displays correctly in IE v10. This problem happens on one computer. Different computer, same firefox version displays correctly. Different computer older firefox version (v17?) displays correctly.
* I have tried disabling all plug-ins and extensions.
* I have created a new profile. Seems like the first time I did this, the page displayed correctly, but when I refreshed (F5) the image is gone and the ftp path box is displayed. Subsequently created new profiles do not display the page correctly.
* I have tried resetting Firefox and the page still is not displayed correctly.
Troubleshooting:
Ctrl-shif-K, opened the Web Console, cleared the console output, refreshed the page by pressing Ctrl-F5. The following is several lines following the first error on the console:
[09:12:29.360] Unknown property '-moz-border-radius'. Declaration dropped. @ http://zone.ni.com/widgets/share/addthis/1.0/css/share.css:11
[09:12:29.360] Expected declaration but found '*'. Skipped to next declaration. @ http://zone.ni.com/widgets/share/addthis/1.0/css/share.css:13
[09:12:29.406] GET http://ct1.addthis.com/static/r07/core076.js [HTTP/1.1 200 OK 167ms]
[09:12:29.392] Unknown property 'size'. Declaration dropped. @ http://zone.ni.com/css/global/us/zoneprint.css:15
[09:12:29.392] Expected declaration but found '@bottom-center'. Skipped to next declaration. @ http://zone.ni.com/css/global/us/zoneprint.css:17
[09:12:29.497] GET http://zone.ni.com/css/global/us/thecore.css [HTTP/1.1 200 OK 26ms]
[09:12:29.452] Expected identifier for class selector but found ' '. Ruleset ignored due to bad selector. @ http://zone.ni.com/css/global/us/thecore.css:115
[09:12:29.453] Error in parsing value for 'filter'. Declaration dropped. @ http://zone.ni.com/css/global/us/thecore.css:259
[09:12:29.453] Error in parsing value for 'cursor'. Declaration dropped. @ http://zone.ni.com/css/global/us/thecore.css:259
Any help is greatly appreciated.

You can remove all data stored in Firefox from a specific domain via "Forget About This Site" in the right-click context menu of an history entry ("History > Show All History" or "View > Sidebar > History") or via the about:permissions page.
Using "Forget About This Site" will remove all data stored in Firefox from that domain like bookmarks, cookies, passwords, cache, history, and exceptions, so be cautious and if you have a password or other data from that domain that you do not want to lose then make a note of those passwords and bookmarks.
You can't recover from this 'forget' unless you have a backup of the affected files.
It doesn't have any lasting effect, so if you revisit such a 'forgotten' website then data from that website will be saved once again.

Displaying Byte Array images in coldfusion

This has been driving me crazy for a couple of days now.I
have a Java class that returns pictures stored in a DB as a Byte
Array.
I am able to display the image but that is all i am able to
do - I want to display the image name, description etc in a HTML
before i display the actual image but i can't seem to find a way to
do that.
I tried using CFcontent as well and that did not help
either.This is what i am currently doing - and all that displays on
the screen is the picture and all content before the picture is
nowhere to be seen.
Picture Name: #variables.picName#
Picture Description:#variables.picDescription#
<cfscript>
context = getPageContext();
response = context.getResponse().getResponse();
out = response.getOutputStream();
response.setContentType("image/jpeg");
response.setContentLength(arrayLen(session.picture));
out.write(session.picture);
out.flush();
out.close();
</cfscript>
Any help will be greatly appreciated.

Mark,
Note that the portal sets the content type (e.g, text/html) and encoding
as the portal page starts rendering. In your case, the
setContentType() would be useless since the servlet container won't let
you change it. You can either use a popup browser window for the pdf as
Kunal suggested, or use an iframe if you want to render the pdf inside
the portlet window.
Subbu
Mark Gilleece wrote:
Hi,
i need to display a PDF file. The PDF is stored in a byte array. This works fine when i run my code (see below) from the .jpf via the debugger/browser, but when i use it as a portlet, in the portal, it does not work ?
Any help is much appreciated.
Thanks
Mark
byte[] pdfDocument = docStore.getPDF();
ServletOutputStream outPdf = response.getOutputStream();
response.setContentType("application/pdf");
outPdf.write(pdfDocument);
outPdf.flush();
outPdf.close();

Adding Text to a pre-defined Image

I have an Image that is within a JInternalFrame and I am wanting to add text on top of the Image. I have tried using the getGraphics().drawString() method, however this requires that the image in question have been created with the create(w,h) constructor, where as my image is created using an MemoryImageSource.
Does anyone have any ideas as to how I could add text to a predefined Image? Perhaps using some sort of transparent Pane/Panel may work?
Cheers
J

Here's the code I used to solve my problem, for those that may be interested.
BufferedImage bf = new BufferedImage(imageWidth,imageHeight,
BufferedImage.TYPE_3BYTE_BGR);
G = bf.createGraphics();
G.drawImage(getImage(),0,0,null);     //Get the original Image
G.setColor(Color.red);
//Draw a rectangle surrounding the object
G.drawRect((od.getBBLeft()-1),(od.getBBTop()-1),
(od.getObjectWidth()+2),(od.getObjectHeight()+2));
//Add the object text to the image
G.drawString(text,(od.getBBLeft()-1),(od.getBBBottom()+20));
getPixels(bf);
image.flush();     //Clear the presently displayed images chache
setImage(bf);     //Define the new image for the JInternalFrame
repaint();     //Call the repaint methods for this JInternalFrame
Cheers
J

Background images are not displayed (CSS, other images ok

I tried clearing cache, looked at about:config for weird configurations, did a private browser window and disabled all extensions. None of these had any effect.
Test pages: Amazon.com and https://developer.mozilla.org/samples/cssref/background-image.html - both of these pages have background images loaded by CSS. For example, Amazon's logo at the top left is a background loaded from a CSS page. The image itself can be viewed raw:
http://g-ecx.images-amazon.com/images/G/01/gno/sprites/global-sprite-v1._V339353059_.png
So can this image:
https://developer.mozilla.org/samples/cssref/images/starsolid.gif
But why, why why do these images display on their relevant webpage? I see Amazon, eBay, and many other websites without a full complement of images. Especially the ones used for menus and other important navigation buttons.
Here is what I see on the Mozilla page mentioned above: I see the text, but no repeating star image. This works in other browsers and on other computers in Firefox.
The page I am typing on right now has no blue background, the entry windows are not correct (like the search window is not a rounded gray box) and the search magnifying glass is missing. So this experience makes even simple pages impossible to use.
Firefox 32, Vista

You did make sure that there isn't a high contrast theme selected in Windows like I posted above?
*http://windows.microsoft.com/en-us/windows-vista/make-the-computer-easier-to-see-optimize-visual-display

Displaying a BLOB image

Hi, i got a trouble to display the image in BLOB
i have win2k3, oracle 10.2 g, php 5
when i upload the image, the browser send this:
Error CGI
La aplicación CGI especificada puede comportarse de forma anormal si no recibe un conjunto completo de encabezados HTTP.
i'l agree your help,
the code is:
<?php
// Sample form to upload and insert an image into an ORACLE BLOB
// column using PHP5's OCI8 API.
// Before running this script, execute these statements in SQL*Plus:
// drop table btab;
// create table btab (blobid number, blobdata blob);
// This example uploads an JPG file and inserts it into a BLOB
// column. The image is retrieved back from the column and displayed.
// Make sure there is no whitespace before "<?php" else the wrong HTTP
// header will be sent and the image won't display properly.
// Based on a sample originally found in
// http://www.php.net/manual/en/function.ocinewdescriptor.php
$myblobid = 1; // should really be a unique id e.g. a sequence number
define("ORA_CON_UN", "username"); // username
define("ORA_CON_PW", "passwd"); // password
define("ORA_CON_DB", "connstring"); // connection string
if (!isset($_FILES['lob_upload'])) {
?>
<form action="<?php echo $_SERVER['PHP_SELF']; ?>" method="POST"
enctype="multipart/form-data">
Image filename: <input type="file" name="lob_upload">
<input type="submit" value="Upload">
</form>
<?php
else {
$conn = oci_connect(ORA_CON_UN, ORA_CON_PW, ORA_CON_DB);
// Delete any existing BLOB so the query at the bottom
// displays the new data
$query = 'DELETE FROM BTAB WHERE BLOBID = :MYBLOBID';
$stmt = oci_parse ($conn, $query);
oci_bind_by_name($stmt, ':MYBLOBID', $myblobid);
$e = oci_execute($stmt, OCI_COMMIT_ON_SUCCESS);
if (!$e) {
die;
oci_free_statement($stmt);
// Insert the BLOB from PHP's tempory upload area
$lob = oci_new_descriptor($conn, OCI_D_LOB);
$stmt = oci_parse($conn, 'INSERT INTO BTAB (BLOBID, BLOBDATA) '
.'VALUES(:MYBLOBID, EMPTY_BLOB()) RETURNING BLOBDATA INTO :BLOBDATA');
oci_bind_by_name($stmt, ':MYBLOBID', $myblobid);
oci_bind_by_name($stmt, ':BLOBDATA', $lob, -1, OCI_B_BLOB);
oci_execute($stmt, OCI_DEFAULT);
// The function $lob->savefile(...) reads from the uploaded file.
// If the data was already in a PHP variable $myv, the
// $lob->save($myv) function could be used instead.
if ($lob->savefile($_FILES['lob_upload']['tmp_name'])) {
oci_commit($conn);
else {
echo "Couldn't upload Blob\n";
$lob->free();
oci_free_statement($stmt);
// Now query the uploaded BLOB and display it
$query = 'SELECT BLOBDATA FROM BTAB WHERE BLOBID = :MYBLOBID';
$stmt = oci_parse ($conn, $query);
oci_bind_by_name($stmt, ':MYBLOBID', $myblobid);
oci_execute($stmt, OCI_DEFAULT);
$arr = oci_fetch_assoc($stmt);
$result = $arr['BLOBDATA']->load();
// If any text (or whitespace!) is printed before this header is sent,
// the text won't be displayed and the image won't display properly.
// Comment out this line to see the text and debug such a problem.
header("Content-type: image/jpeg");
echo $result;
oci_free_statement($stmt);
oci_close($conn); // log off
?>

Hi, i got a trouble to display the image in BLOB
i have win2k3, oracle 10.2 g, php 5Which version of PHP 5? Some LOB handling got broken and fixed along the way.
Try the latest DLL from http://pecl4win.php.net/ext.php/php_oci8.dll
-- cj

HTML text on top of productBranding image

Hi all,
I'm new to using UIX XML in JDeveloper 10g and was wondering how I could render HTML text on top of an image (i.e. the text is not part of the image.gif). I'm able to display text all around the image but not on top of it. I'm guessing that this can be done since it is one of the BLAF specifications for the Product Branding guides.
Having spent a couple of days looking through various related posts, I've yet to make any head way.
Cheers

Woohoo! Got it. Could have done it in the stylesheet as well!
<rowLayout>
<contents>
<cellFormat height="70" width="300">
<inlineStyle>
<property name="background-image">url(images/financial_collage.gif)
</property>
</inlineStyle>
<contents>
<styledText text="Product Information">
<inlineStyle>
<property name="font">Garamond
</property>
<property name="font-size">+24
</property>
<property name="color">#336699
</property>
</inlineStyle>
</styledText>
</contents>
</cellFormat>
</contents>
</rowLayout>

I need to create a image using some numeric values and i want to display values in image,

I need to create a image using some numeric values and i want to display values in image, Numeric values be enterd by text file, excel file or user input by dialog box,
this is the sample if image.
http://s17.postimg.org/5xvtzbztn/5_01_03_I.png
128 x 16 Pixels , Back ground Black, Numbers in Red, Should be same as above picture.
Because i have hundreds of images to create like this.
If any one can make a script for this it is very good.
Sorry about my English.
Thank you.

Have you checked out data driven graphics?
https://helpx.adobe.com/photoshop/using/creating-data-driven-graphics.html

Movement of message text in Display item

Hello Dears,
How i can blink message text in Display item and movement of message text from right to left and left to right in the Display item please share with me your valuable knowledge it is urgent.
advance thanks.

Hi,
A couple of options. Create a timer and write a pl/sql procedure which will do all those things for you, like changing background/foreground colors of your text/display item and replacing text imitating its movement. Or use image item instead with animated gif or something.
Regards,
Andrew Velitchko
BrainBench MVP for Oracle Developer
http://www.brainbench.com

Text not displayed in the Web Report

Hi All,
I have a query where user is expecting both Key and Text to displayed in the report for the Info object "Local Product High". This infoobject has text data available. But Iam not sure why this is not getting displayed even when I select both Key and Text in the properties screen.Only Key is getting displayed.
Can some one throw some light on this.
Regards,
Srinivas

I juct checked the Text table and I see the texts for the infoobject exists. I do not think CHange run will resolve this issue. but yes the master data is active .
I will now try to run the report through Bex and come back.
Thanks for the input..
regards,
Srinivas

Text Message display on Curve 9360

Hi...just got a new Curve 9360. The default text message display shows all messages i.e. if I've sent a text most recently that is what I see at the top. What I want it to do is show the SMS Inbox (which I can navigate to via the folder options, but I can't find a way to set it as a default). Can't work out how to do it either on the device or when connected to the PC. Any suggestions...?...R

Do you mean that currently ALL of your email messages and SMS text messages are mixed in one folder when you view, and you want to see a folder on your homescreen of ONLY your SMS text messages? And your email messages in another folder?
If so, on your device, open that Messages folder > press the Menu key > Options > Inbox Management and check the box on "Text Messages", and save. That will put an SMS Text message folder on your screen.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Text is displayed as an image?

Similar Messages

Maybe you are looking for