Text is getting cut off when saving a PDF from Photoshop CS 6

I've begun to run into an issue quite frequently that I just cannot find a work around for. The first image shows what it looks like in Photoshop:
Then this is what it looks like in Adobe Acrobat after it's saved from PS:
You can see a whole swath of text is just missing. I've tried everything I can think of to get it to save correctly. This is a high resolution image, exported at press quality.
Please help.    

I've played around with the PDF settings, and nothing seems to work. Here's what I'm using now:
As for the font properties, this is what Acrobat shows after I open the file in there:

Similar Messages

  • Text getting cut off when printing to PDF from Excel

    Hello,
         I've seen a lot related to this subject but nothing that shows a real solution.
         Using Excel 2003-sp3 and Adobe Acrobat v.9 Standard, the right half of the last character in the string gets cut off. It prints from excel fine.
         It's not always the text that is the right-most on the page either. An affected PDF file is attached - note the cut off "S" on the last line (NET ASSETS OF GOVERNMENTAL ACTIVITIES).
         Any assistance is appreciated.
    Thanks,
    Kevin Murphy

    please delete me from your mailing list.  tks.
    Date: Wed, 10 Feb 2010 11:20:28 -0700
    From: [email protected]
    To: [email protected]
    Subject: Text getting cut off when printing to PDF from Excel
    Hello,
         I've seen a lot related to this subject but nothing that shows a real solution.
         Using Excel 2003-sp3 and Adobe Acrobat v.9 Standard, the right half of the last character in the string gets cut off. It prints from excel fine.
         It's not always the text that is the right-most on the page either. An affected PDF file is attached - note the cut off "S" on the last line (NET ASSETS OF GOVERNMENTAL ACTIVITIES).
         Any assistance is appreciated.
    Thanks,
    Kevin Murphy
    >

  • CS5 Text still gets cut off when using filters

    In Flash CS4, I encountered a strange bug where text would get cut off if there were any filters applied to the text box. I was so excited for CS5, because I had heard that bug was fixed. Now I see that it is not.
    I'm using Classic Text in an Actionscript 2.0 file. Here's a screenshot to demonstrate what I mean. The top line is text with no filters applied. The middle line is text inside a movie clip, with filters applied to the movie clip. The bottom line is text with a drop shadow filter applied directly to the text box. Why does it cut off the end of the text???
    Has anyone else experienced this?

    Hi,
    You can set the Cangrow property of the textbox to true which allows to grow your textbox and is default for any text box unless you have changed it.
    Please mark this post as Answered if this post helps to solve your query.

  • Text gets cut off when exported to PDF

    When I export my report to PDF some of my text gets cut off where it would meet the right edge of the text box by 1 or 2 letters.
    This only happens when I export to PDF through my web application or when I export it throught the Report Manager URL
    If I export it on my local copy of SSRS then it shows up fine without the text getting cut off

    Hi,
    You can set the Cangrow property of the textbox to true which allows to grow your textbox and is default for any text box unless you have changed it.
    Please mark this post as Answered if this post helps to solve your query.

  • How to prevent the logo from cutting off when making a pdf from a powerpoint presentation.

    The descender of the "g" cuts off a bit on the pdf, although it's fine on the ppt doc. Any suggestions on how to correct this? Thanks.

    Might be better to post this in the Acrobat or Indesign forums.

  • Titles get cut off when playing after the burn

    The title created in the movie are too wide and get cut off when playing it in a DVD player into a TV. Is there a setting I should use before burning?
    Any help is appreciated.

    You should turn on the TV Safe Area and make sure that everything that you care about is within this area. Anything outside the area is subject to the over-scan of TV sets.

  • Bottom margin gets cut off when I try to print

    bottom margin gets cut off when I try to print

    Not being able to check it out on Pages 5 I have tosay how it works in Pages 4 (09). When Show Layout is checked/on you should see a grey border which is the area that the printer can't print on. Do you see a grey boder in your Pages 5?
    If you need a smaller margin on your document than the printer seems being able to do check if you don't hae a "borderless" option for the paper sizr you use. You check it in File > Page Setup
    Also go to HP and check if there is a newer printer driver if yours has some years on it.
    I hope this will help you

  • Why iphone centre in malaysia always get cut off when i call.

    i always get cut off when i call iphone centre on malaysia,
    need explaination from centre.

    so why are you asking us users?  That makes absolutely no sense at all.

  • When saving a PDF from a FrameMaker book, is it possible to set document filenames as bookmarks in the PDF?

    When saving a PDF from a FrameMaker book, is it possible to set document filenames as bookmarks in the PDF? Currently when I have a Framemaker book that I want to save as a PDF, I choose Save Book As and then choose PDF for the file format. A dialog box comes up in which I can choose the Bookmarks tab and choose which tagged content I want to be made into bookmarks in the PDF file. What if I would rather have the filename of a document rather than the chapter title be a bookmark in the PDF? Is that possible? Where would I choose that option? Thanks!

    There are two ways that you could do this. You can either use postscript text frames and enter the correct pdfmark entries to show the file name with the corresponding actions (i.e. where to go in the PDF) or you can use hidden text in FM and the "Filename (Short) " variable in a unique paratag to be picked up by FM's bookmark creation.
    To go the pdfmark route, see http://www.pdflib.com/fileadmin/pdflib/pdf/pdfmark_primer.pdf for details and also consult the Adobe Pdfmark Reference manual (http://www.adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/pdfmark_reference.pdf).
    The hidden text route would use FM's Color Views to specify a colour as Invisible. This will make the content visually disappear from the screen (and any output), but FM will still be able to read the contents of any text that is coloured with the Invisible colour(s).
    1. Pick or create a colour that you want to be invisible. [Magenta is usually a good bet and stands out visually].
    2. Set that colour to be invisible in View 1 and visible in View 6. [you can use the shortcut <esc> v 1 and <esc> v 6 to toggle between the views.]
    3. Create a paratag to use for the filename and set the font colour to use the invisible colour.
    3. In the title of each chapter file, drop an anchored frame that is set to be outside of the text frame [so it won't interfere with any other content].
    4. In that AFrame, insert a text frame and use the invisible paratag defined in step 3.
    5. Insert the Filename (Short) variable in that text frame.
    6. Repeat steps for all files to be included in the bookmarks.
    When creating the PDF bookmarks, select only the paratag used for the invisible colour.
    Don't forget to toggle the View to be invisible (i.e. <esc> v 1  - this also works at the book level for all files in the book).

  • Text in fillable text form gets cut off and appears only in the lower half of the text form?

    I'm trying to create a text-fillable PDF form. However, when I add a text form, the text I test in it gets cut off and appears only in the lower half of the text form by default (see 2nd photo below). How do I correct this and make the text take up ALL the space in the form like the 1st photo?

    Have you set the text field properties options to multiline? Is so, please attach a screen shot of that dialog box so we can see how it is set.

  • Why do my margins get cut off when I right click print, but not when I open my document and print?

    When I right click print (without opening the document) my margins get cut off, but if I actally open my pdf document and click print, it will print just fine.  This only happens when the document has print that is close to the edge.
    I am using Adobe 10.1.2 with Windows 7.
    Thank you in advance for your thoughts and help

    As for your comment on this being my first Mac, and the program issue, you misunderstood. Yes the eMac is in fact my first, personally owned, Mac computer other than the original Apple II series floppy fed PC, in which me and my father owned. The only other Apple/Macintosh computer I had experience on was my father's 13" MacBook Pro, and 20" iMac (both ran OSX Tiger 10.4.11, just as the one I have know runs). The iMac was upgraded to Snow Leopard due to our need for better picture/video/audio editing software such as that of Adobe, and the Macbook Pro was sold because of a business that was started being siphoned out of money. I purchased the eMac from a small business based off of eBay. It had the majority of OSX Tiger software, only missing minor programs like Photobooth. Other than that, it had no wireless software like BlueTooth, Wi-Fi capabilities, wireless sync, ect... But alas, when you buy a Apple/Mac computer, you must take a few cutbacks when purchasing it (even refurb.) for around $120.00 including taxing, shipping, handling, ect... I purchased nearly all of my software from co-workers and friends who had an extra key, or I would receive the software disc from them, and buy a key. The only "illegal" thing I had on the computer was music I had downloaded from LimeWire. I have never, and will never, trust any software coming from a torrent download site.

  • How do I get my watermark not to get cut off when printing from aperture?

    When I export an image that I have put my watermark on and print it the water mark gets cut off in the printing

    Aperture should scale watermarks down to fit the exported image.  Perhaps it is scaling to one dimension and not both?
    Have you tried resizing your watermark?  I suggest creating a watermark for each commonly used export size.  I use a wide and not tall watermark, in these widths (in pixels):
    - 320
    - 640
    - 1024

  • Brochure template right-side edge gets cut off when printed

    its horizontal set-up, 8.5x11.0. but on both my printers (both HPs) the right edge gets cut off. how can I manipulate the doc to a smaller size without making the formating go cattywampus?
    comments are hidden (that helped a little)

    With my DeskJet there is an option to "scale down" a document to fit the page. Do yours offer that?
    Also, I apologize if this idea is too hokey, depending upon the nature and extent of your printing project, but would it be acceptable to set up your printer for legal-size paper and then trim the hardcopies?
    MacBook Pro   Mac OS X (10.4.9)  

  • Incorrectly coloured text when saving to .PDF using Photoshop CS4

    I am using Photoshop CS4 on Windows 7, and have designed my own business card.
    When saving to .PDF to send to printers I am finding that a small section of text is saving with a white section to it, for example out of the 3 lines of text on the card the bottom left hand corner of the & sign I have in the design is coming out white, the rest of the text is a golden colour.
    I have tried searching on this forum and on google but can't seem to find anyone with my actual problem so unsure where to go.
    Any help much appreciated.
    Thanks

    Mylenium wrote:
    Well, you could change the native text color instead of using layer styles, could you not?
    Mylenium
    Or make the Type and Hyphen layers into a single Smart Object and clip a yellow layer to it.

  • Strokes on appearance is getting cut off when exporting for web & Devices

    I'm a screen print artist using Adobe Illustrator CS5 in windows 7(blah!) to export images of our customers' artwork into a huge folder of images on a server. The images are then loaded into a program so that they can be viewed company-wide and by the customer.
    Occasionally, when there is an appearance applied to text it seems to cut off the tops and/or bottoms of the outermost stroke.This seems to be only happening to text, and happens randomly and is very annoying. See the image attached.
    it does this with both JPEG and PNG images, and whats more, changes when you adjust the image size. it either gets better or worse. I have to change the image size on every export so that they are all within our size requirements.
    I have found that if you put the art into an envelope with all the settings at 0 and then export for web it prevents this from happening. However, that isn't very efficient as i need to be moving a ton of artwork a day, and I am not the only person who may be working on the Illustrator file.
    Is there any setting either in illustrator or windows that may be causing this anomaly?

    Try adding:
    Effect >> Path >> Outline Object
    So  your type will still be editable
    If that does not work you may want to:
    Type: Create Outline
    I only had this problem once before, on some snickerdoodle cookies package, and that was a script font. Might be related to the font you use.

Maybe you are looking for