Text is missing after inline attachment

In Mail, I compose an email and include an attachment. Text included in the email but placed after the inline attachment is not received by the recipient. For example, in the following, everything after [ATTACHMENT HERE] is not received.
Dear Joe,
This is some sample text. [ATTACHMENT HERE].
This is more sample text.
Sincerely,
The Sender
Any ideas?

Receiving email client Outlook or an AOL address?
They're both pretty crappy and rendering email.
When sending to these recipients, make sure you have Always send windows friendly attachemnts and Always Insert Attachements at end of message is checked in the Edit>Attachments menu.
Also best to send plain text.
If you need to send the image inline, with formatting and stuff, as you start the message, change the Font to something other than your default font.  That font change should flag to Outlook that it is an HTML email and it should render ok. However, combinations of ISPs, Exchange Servers, and server virus scanners can wreak havoc on email as it passes through all the wickets getting pulled apart and put back together.

Similar Messages

  • Has anyone experienced text going missing after using Change All in the Find Font dialogue box?

    I manage an artwork production studio and two members of staff have separately reported that when using the Change All command to substitute fonts in InDesign's Find Font dialogue box, some text disappears from their documents. All affected text is originally set in the same font, and most of the conversion is fine but a few instances of text are actually removed (not reflowed). In the latest reported case, only four or five instances of text were 'deleted' across two pages of a 20pp document.
    I've found a link that refers to the same issue but it's unresolved (http://www.listsearch.com/InDesign/Thread/index.lasso?20041#last)
    I haven't been able to replicate this behaviour but would be interested to know if anyone else has experienced it and if so, under what circumstances it can occur, and what work-rounds or fixes are available.
    Applies to InDesign CS3 and CS4, have not tested with CS5 because we haven't upgraded yet.

    Joel, I am having the same problem you described. I have read of similar posts on PrintPlanet.com. Someone there thought it was a different text engine or something in CS4 which may be causing the problem.
    I don't know what causes this but I believe it can be traced to a previously created file in CS3 is saved as a CS4 document.
    The fonts associated with this problem for me are always Gill Sans, Palatino and some form of Helvetica. There may be others but these are the ones we notice the most.
    Today I worked on an InDesign CS4 file. When I opened it I was given a missing font warning. I went to Find Font and it was different typefaces of Gill Sans that was missing. When I changed the missing font to Gill Sans Regular entire lines of text disappeared. I closed the document without saving it and reopened it. I did the same thing in replacing fonts. This time no text disappeared. Not reflowed; not white; not hidden—gone.
    This is what I have been seeing for the past few months. The disappearing text is random and cannot be duplicated, though fonts may disappear in some other place. You never know where text will just disappear.
    The workaround I have found is to export your file to an INX document and reopen it in CS3. You have to replace all missing text before saving it as INX, though. To my knowledge CS3 has never had this happen.
    The workaround, though it works for me, is annoying. I'd like to know what to do to resolve this issue. What's the use in having CS4 if you can't trust it completely.
    I use a Mac running 10.6.3. I also have running Suitcase Fusion 2.

  • Text messages and phone calls from March 2012 to date are missing after activating iphone5

    text messages and phone calls from March 2012 to date are missing after activating iphone5. I backed up my 4 before activating my 5. Can i retrieve them somehow?

    i would not want to bet on nokia ever releasing a patch or update in the software to allow this function on this particular phone.
    if you look at nokia phones over the years, they have added functionality like this across a wide range all at once, take for example timed profiles on symbian phones. these have only just been phased in.
    i do not think it is a development cop out, more along the lines that nokia is a huge company and as such would have a huge effor in market research. if they didnt pick this out through their market researc, why spend the money adding it?
    the comment on annoyance is entirely personal to me, as it is important to you - you may want to consider moving to a symbian (series 60) based handset as these give you a lot of expansion for this sort of need.

  • Workbook Text Elements are missing After Upgrade to BI7.0

    Hi All
    I am unable to see "Text Elements" in Workbook which is migrated from BW3.x to BI 7.0.
    I am using Windows XP, MS-office 2007, GUI 710 FEP5.
    workbook is working fine with Bex 3.0
    I had checked all the pre- requisite for BI 7.0 and BEx .
    Please advise me.
    Regards
    Vivek Tripathi

    This is an Known issue while upgrading WB's to BI7 and we have posted the same to SAP.
    Try this procedure,
    Open your 3.x Wb in BI7-bex - Click okie on Bex upgrade popup.
    Click on change variables in your WB now and enter necessary variable values.
    Now save you WB in BI7-Bex . Try re opening the same WB,
    You have to see your text elements now after refresh.
    if u save the same WB, w/o refresh or change varaibles, you will again miss text elements.
    The below is the reply from SAP.
    " As following to our call, I was able to open the workbook sap_test2( test WB that SAP has created in our system to replicate the problem) and to refresh it in the latest patch 17. However after saving it without
    refreshing it, I was not able to open the workbook. so we are investigating the issue.however as temporary workaround you can the following
    1. Eenable the "Refresh workbook on open" property. this will prevent
    user from saving workbook without refreshing
    2. You can apply a ABAP note which disallow users to upgrade 3.x
    workbooks. But the note is currently in pilot released."
    Ohoo, I think you are from Satyam..the above is the latest info that we got from SAP.
    Regards
       KK
    Edited by: Chivukula on Aug 11, 2008 3:40 PM

  • Text is missing in migo - excise invoice tab

    Hi,
    I'm doing migo with excise invoice tab option, where on the left, there are options like, capture & post, part1 only, no excise entry .etc..
    In that area if i use F4 option,  i can see both the fields i.e field nbr as 01 and text as capture and post, after selecting, the screen shows only 01 and text is missing.
    pls suggest, how to get the short text in excise invoice tab.

    Kunal
    in our dev , it's working fine , but in prod. only we are geting such display. any idea?
    Edited by: sapjj jk on Sep 22, 2008 7:12 AM
    Edited by: sapjj jk on Sep 22, 2008 9:19 AM

  • Why can I no longer specify my preferred font for text which has a link attached to it?

    I use TBird to send old school, professional looking business letters with logo image header and footers. Recently, I am unable to apply my preferred font to the website link part of my footer. This seems to have become an issue after one of the more recent upgrades of TBird. Its frustrating as I feel good graphic design requires uniformity in font style/type and size. This seems no longer possible. Now when I attach a hyperlink to my website address it changes my preferred font to something that looks like Arial and locks both font and size. It looks crappy.

    ''Kits47 [[#answer-701080|said]]''
    <blockquote>
    The only way I know its 12 pt. is that I copy into Word and check the font size there.
    </blockquote>
    Huge error number one, and probably cause of your problem in the first place.
    <blockquote>
    I would really like to see TBird use point size for fonts.
    </blockquote>
    Thunderbird uses HTML, HTML is expressed in pixels.
    <blockquote>
    In terms of not having Papyrus on you Linux box, I suppose that's you're choice.
    </blockquote>
    Licensing actually, not choice. The font is licensed and distributed by Microsoft. See http://www.microsoft.com/typography/fonts/font.aspx?FMID=1113 for a list of products your recipient can install to get the font.
    <blockquote>
    In my outgoing email subject line I always specify that my reply is best viewed in HTML, full screen.
    </blockquote>
    HTML is the default for almost all mail so that does appear to be overkill. Full screen. Personally I would be just as likely to not read mail that required full screen. Mail gets about half a screen here.
    <blockquote>
    Most systems will automatically substitute fonts for ones not on that system, at least in Apple and PC systems. </blockquote>
    Papurus actually has a higher chance of being present on a Mac system than a windows one as Apple have distributed it with OSX since 2003.
    <blockquote>
    Anyway all of that is a little off topic. I wanted help with why TBird intermittently messes with font size and style when I cut and pasting email responses to people.
    </blockquote>
    As I said at the beginning. Do not use word. Word first converts to RTF then to HTML (All done internally) The resulting HTML is extremely complex and to put it bluntly pastes as a whole page from which Thunderbird must extract only the relevant parts. (inside the body tag) The end result is the program ends up confused about what goes where.
    <blockquote>
    And, if there is some reason why sometimes, again I stress sometimes, it will not let me use the font of my choice for text that has a hyperlink attached to it.
    </blockquote>
    If your pasting from Word the most obvious thing will be that the hyperlinked text will have it's own font tags another reason I suggest you use the program your in.
    * If you want it on paper use a word processor. It is what they are designed for
    * If you want it in email use the email program to actually write your mail.
    * If you want to guarantee the look on delivery send PDF attachments.

  • Spry Validation Textarea Widget "error: missing ) after argument list"

    Hi all,
    I'm trying to apply validation on textarea in one of my forms but it keeps giving me the same error msg in Firefox "missing ) after argument list". Funny thing is that the line witch initiate the textarea object is one on one from the Spry Framework Documentation!
    Here is fragment of the form code:
    <label id="cContentCont">
         <span class="cFormTag">Comment: <span id="charCounter"></span></span>
         <textarea name="comContent" id="comContent"></textarea>
         <span class="textfieldRequiredMsg"></span>
    </label>
    Here is the code that initialize this object:
    var sprytextarea1    = new Spry.Widget.ValidationTextarea("cContentCont" {maxChars:100, counterType:"chars_remaining", counterId:"charCounter"} ) ;
    I have also 2 other text inputs befor that element and they are working just fine befor i initiate that particular textarea!
    I can't see an error or missing argument in this line, please if somebody encounter the same problem and have solution I be glade to share his experience!
    Thanks !

    Your code is missing a comma after "chars_remaining" as in
    var sprytextarea1 = new Spry.Widget.ValidationTextarea("cContentCont", {maxChars:100, counterType:"chars_remaining", counterId:"charCounter"});
    Hope this helps,
    Ben

  • Photos in Catalog missing after update

    After the latest update my catalog seem to be missing.  My photo's are in Collections, but as soon as I want to work with them ; I get message Photo missing.  (See attached.
    If I try and find missing folder and check box - DON'T IMPORT SUSPECTED DUPLICATES - the tick goes away as if the photos are already imported.  (See attached print screens.

    Hi, the situation with your images is that the catalog has lost contact with those images.
    Lightroom does not store those images in the application or the catalog (database) but rather stores references for their location on disk when those images are imported.
    If you have moved those images or deleted from the disk outside of Lightroom then Lightroom has no idea where they are. In the case of Windows machines an additional problem can occur with external hard drives where the drive letter can change if the drive is disconnected and then subsequently reconnected.
    Do not try to re-import those images.
    For emphasis - do not try and re-import those images.
    Instead look at the folders subpanel and if all the folders have question marks associated with them R-click on the folder highest in the hierarchy of folders. A dialog opens inviting you to navigate to where this folder is located in reality.
    Once you have done this then all the images should have their references updated in the catalog and all will be well.
    If the problem is only related to occasional images R-click on exclamation mark that is present on the image (top right) and follow the process as outlined above.
    If the problem  is related to moving images outside of Lightroom then learn to move images from within the Library module.
    If the problem is because of external hard drive letter allocation by Windows then reallocate a drive letter that is close to the end of the alphabet to avoid this problem.
    Tony Jay

  • Siri & voice to text icon disappeared after update

    After trouble shooting at the Apple store last night, I updated my operating system to 6.1.  Now the icon for voice to text is missing from my messaging choices and Siri is gone as well....thanks for your help!

    Voice control needs to be turned on in the Privacy settings options...
    If you're still having problems with audio sounds not playing (like ringing, notifications bells & beeps, or audio from videos or podcasts) like I did, this is what you do:
    Go to the Apple store and tell them of your issue.  One question they will ask is if the phone has been exposed to any humidity.  They will take your phone to the back and look inside with a microscope and determine if a particular connection on the pcb is corroded. 
    If you're under warranty, or close to the past expiration date, they DO have the option to exchange your phone for a new one.
    (there are other methods to clearing this issue, such as turning it completely off, cleaning the ports with an alcohol damp qtip and/or doing a complete reset)

  • SQL Plus Text is wrapping after 80 characters.

    The following is the sql I am using to spool the data into a file. However, I am confused with the output. The text is wrapping after 80 characters and it is adding blank lines after each column in the select. Am I missing some thing here. I appreciate your help.
    set echo off
    set feedback off
    set termout off
    set heading off
    set verify off
    set pages 0
    set long 20000
    set linesize
    clear columns
    spool /opt/consort/hari/hl7_msgs_533.txt
    select rtrim(msh_seg) ||
    rtrim(pid_seg) ||
    rtrim(pv1_seg) ||
    rtrim(orc_seg) ||
    rtrim(zri_seg) ||
    rtrim(obr_seg),
    segment_value
    from hl7_msgs where message_id = 1;
    spool off;
    Here is the output.
    PID|1|007985541|007985541||MOORE,WILLIE,||11-JAN-90|M|||3000 DOLFIELD AVE^^TAL
    TIBORE^CP^21215||(510) 766-7000||||BAP||100-10-1000||||||||||||^M
    PV1|1 |I|ICU^S412^A||||JAKOBOVITS,JULIAN,MD,MD|,,,||MED|||||||JAKOBOVITS,JULIA
    N,MD,MD|I ||||||||||||||||||0 ||||||||09-NOV-97|18-NOV-97||||||||^M
    ZRI|1 |LIBRARY GROUP|FILE RM|FILE RM|10-NOV-97||S412|||RAD|^M
    OBX|1 |TX|ULT00004^VENOUNI/US^VENOUS IMAGING WITH DOPPLER|||~~RIGHT LOWER EXTR
    EMITY VENOUS DOPPLER SONO, 11-10-97, -8965~CLINICAL INDICATION: cellulitis, r/o
    DVT~~The right common femoral vein, superficial femoral vein and popliteal veins
    were scanned using color flow, duplex and B-mode scanning. The veins were comp
    ressible and showed spontaneous flow which augments normally with compression of
    the calf.~~IMPRESSION:~~No evidence of deep venous thrombosis in the right femo
    ral and right popliteal veins. ~~ ||||||F ||||784|CAMP,LIBA,DD,CD||^M
    OBR||9711102125132|35|ULT00004^VENOUNI/US^VENOUS IMAGING WITH DOPPLER|||10-NOV-9
    7|10-NOV-97||||||||JAKOBOVITS,JULIAN,MD,MD||||||12-NOV-97|||||||||DOPPLER FLOW S
    TUDIES OF R LEG R\O DVT|CAPITAL,SUSAN,CD,|||FORD,VONDA,SKETERS,|||||||||^M
    ~******************************************
    ~
    ~

    It still wraps up the output.
    You may have embedded carriage returns in your columns.
    Let me explain you with an example.
    SQL> create table mytable(col1 varchar2(80));
    SQL> insert into mytable
      2  select lpad('ab',80,'cd') from dual;
    1 row created.
    SQL> select lpad('ab',50,'cd')||chr(10)||lpad('ab',29,'cd') from dual
      2 
    SQL> insert into mytable
      2   select lpad('ab',50,'cd')||chr(10)||lpad('ab',29,'cd') from dual;
    1 row created.
    SQL> select * from mytable;
    COL1
    cdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdab
    cdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcdab
    cdcdcdcdcdcdcdcdcdcdcdcdcdcab

  • Masterdata text is missing .

    Dear Friends 
    when i am doing reporting on the 0material Text for material is  missing .  so  when i checked  the maintain master for 0material . the text was missing  where the language key was blank . after searching  i found out that they are two languages one is ZH and other is EN . in ERP  when they create a article they logon language was ZH , so in maintain master data  i changed the Language  key to ZH . then i was able to see the text . but when i keep EN or Blank  the text is not apperiang .
    So my question  is how can i get the text for the EN or when blank also . so should i untick language Dependent  in the infoobject . the user want language key  to be blank . so when they do the reporting they should be able to see the text when launage isblank . Please provide me with solution this urjent . please  do send your replies .
    Thankyou

    Hi,
    Like you mention, you can either remove the language dependent component of your infoobject. In this case, language key in your source system will remain unmapped (since all your text is maintained in ZH lang, so I don't think this would be much issue).
    Or in your transfer rules / transformation rules, you set 0langu to constant = 'EN'. So, the text maintaned in 'ZH' would be re-mapped to language = 'EN', which I assume is the default language for your BW setup.

  • INLINE attachement not processed

    Hi all
    i want to process inline attachement so that i can replace c:id by fileName , but how can i know that an email has an INLINE attachement ?
    here is my code :
    if(disposition == null){
         System.err.println("GOT No attachement contentTye : " + p.getContentType());
    else if (disposition.equalsIgnoreCase(Part.ATTACHMENT)){
         System.err.println("we got attachement ! , filename : " + p.getFileName() + "contentTye : " + p.getContentType());
    else if (disposition.equalsIgnoreCase(Part.INLINE)){
         System.err.println("we got an INLINE attachement ! , filename : " + p.getFileName() + "contentTye : " + p.getContentType());
    else{
         System.err.println("we got unknown disposition :" + disposition); //shouldn't happen !
    }Here the Header of a message that contains an INLINE attachement , but my code prints "GOT No attachement contentTye : image/gif;name="header-right.gif"" :
    ------=_Part_16299_18941790.1232906945413
    Content-Type: image/gif;name="header-right.gif"
    Content-Transfer-Encoding: base64
    Content-Description: header-right.gif
    Content-Location: header-right.gif
    Content-ID: <header-right.gif>I see no content Disposition in the header , but there is an INLINE attachement and gmail shows it correctly , how can i modify my code to handle inline attachements ?

    Just add this line with your code.
                   htmlPart.setContent("<img src=\"cid:im1\">","text/html");
                   multipart.addBodyPart(htmlPart);
                   BodyPart imgPart=new MimeBodyPart();
                      DataSource ds=new FileDataSource(file[1]);
                      imgPart.setDataHandler(new DataHandler(ds));//Setting the header
                      imgPart.setHeader("Content-ID","<im1>");

  • DI custom SQLs were missing after importing a good ATL file

    The customer had a strange issue recently - lots of custom SQL statements were missing when they imported a good ATL file into a brand new repository. This hasn't happened before. And they are sure that the DI repository versions are the same between the one it was exported and imported. I did some troubleshooting for them and found out:
    1) The custom SQLs are intact when I opened the ATL file in a text editor. And the ATL file can be imported without any issue into other repositories.
    2) Most custom SQLs are missing but not all. Some are imported OK.
    3) When I opened the SQL tranform for those with missing SQLs, the textbox area for the SQL statement was blank. This caused errors in validating the job.
    4) Sometimes the issue was resolved when the developer re-initialized the repository and imported the ATL again. But sometimes this strategy doesn't work - the SQL statements are still missing after the repository has been re-initialized a couple of times.
    The DI version is 11.5.3 on HPUX with repository version 11.5.1.5. The repository database is either Oracle 9i or 10g.
    Thanks,
    Larry

    The issue was resolved. The error occurred because of the database version mismatching. When the job was exported from the dev repository, datastores were excluded. The datastores in dev point to Oracle 9i sources. However, when datastores were recreated in test, some of them point to Oracle 10g sources (same database structure, just version upgrade). Therefore, when the job was exported from the test, although the datastores were still excluded, the version number "10g" were embeded in the SQL transform. This caused the SQL text to be excluded when importing ATL into the dev repository.
    The action taken is to 1) delete datastores with version 10g; 2) create one with version 9i; 3) then exported the job into a new ATL. The new ATL can be imported into the dev repository without any issue.
    Thanks,
    Larry

  • I restored my safari bookmark playlist from time machine.But it again missing after sometime.Again I restored the same thing happns again.plz help

    I restored my safari bookmark playlist from time machine.But it again missing after sometime.Again I restored the same thing happns again.plz help

    Triple-click the text on the line below to the clipboard, then copy it to the Clipboard (command-C):
    ~/Library/Safari/Bookmarks.plist
    Quit Safari.
    Select
    Go ▹ Go to Folder
    from the Finder menu bar. Paste (command-V) into the text box that opens, then press return.
    A folder window should open with a file named "Bookmarks.plist" selected. Move the selected file to the Desktop, leaving the folder open.
    Relaunch Safari. It will open with the default set of bookmarks. Delete them all. Select
    File ▹ Import Bookmarks
    from the Safari menu bar. Import from the bookmarks file you moved to the Desktop. Arrange the bookmark folders as you wish.
    If Safari now performs normally, you can delete the old bookmarks file. Otherwise, quit Safari again and put back the file you moved, replacing the newer one with the same name. Close the Finder window and post again.

  • How to get rid of ' Inline attachment ' duplicate message in Email

    Hi ,
    When I got email notification in my personal email. I got twice message as per below.
    Message body start.
    Message body....
    *"inline attachement"* --> I got twice these message.
    *"inline attachement"* ---> I got twice these message
    Message body end.
    Could you please help me how to get riid of these duplicate message.? Any help will be appriciate.
    Thanks
    Raj
    Edited by: RajPatel on Apr 8, 2009 8:37 AM

    This is crazy. I tried syncing the calendar with Entourage only, to see if it made a difference. I got calendar events duplicated as much as 7 or 8 times on both Entourage and the BlackBerry. Make it stop!   Please....?
    After I manually return, once again, to just one calendar event by deleting all the extraneous ones, how can I keep this multiplication of events from happening with each sync?  It's like all the old syncs are still stuck in there and get added to the calendars.  Please help.
    Thanks.

Maybe you are looking for