Text is not copying into Header Text Type from Contract to Order & Invoice

Salute Masters!!
I have done related configuration in VOTXN for Sales Document & Billing.
After creation of Contract, given Text in New Header Text Type, itu2019s not copying into Sales Order or Invoice.
Although, which was configured earlier one, for that Header Text Type, text is copying into Order & Invoice both properly.
Firstly; I have given the same Access Sequence for the New Header Text Type, It was copying the same matter which was given into Old Header Text Type, then I have created new Access Sequence & assigned changed Access Sequence for the New Header Text Type, even then it is not copying.
I have checked other Configuration those are OK!
Assignment of Sales Document Type to Text Determination Procedure, it is OK!
Please provide the solution.
Thanks in advance.
Warm Regards,
Sanjai Srivastav

Hi
Hope the issue is resolved , if not please check these settings - VOTXN
1. Create Text Type for your Sales order -S001 and Billing Invoice - B001
2. Create Access Sequence - Z001.
3. Include your Both Text Type in respective Procedures.
Now
WHen you will assign the Text into your Text Procedure - Assign same Access Sequence in both the case.
In your Sales Order text procedure - Assign
1. Assign Text Type S001 and Access Seq Z001
2. Select the Access Seq on the left side in the VOTXN T-Code , a POP up will come and then input Your Access Seq into that
3. You will get another screen, Here give the Seq No-1 and VBBK Header Text and Again Assign TEXT type S001.
Now go to Invoice Text Procedure
1. Assign Text Type B001 and Access Seq Z001 and SAVE.
Once you will do that the step 2 and 3 will automatically get copy in the backend.
To Check
2. Select Access Seq on left side and in the Pop Up input access Seq. Now there you will see the system has copied the
fields from the Order.
Now try running the scenario. same you can do for Contract and Order.
Hopefully this will Help you.
please let me know if any concerns
Thanks
RB

Similar Messages

Vendor Text must be copied into PO texts.

Hi Experts
I assume that both "Purchasing Memo" and "Purchase Order Text" should be copied from the vendor master. When testing, only the "Purchase Order Text" is getting copied into the Purchase order.
However i want the purchasing memo to also appear in the PO .
Any idea how to set this in this system?
Thanks
Dkmurthy

Hi Experts
I assume that both "Purchasing Memo" and "Purchase Order Text" should be copied from the vendor master. When testing, only the "Purchase Order Text" is getting copied into the Purchase order.
However i want the purchasing memo to also appear in the PO .
Any idea how to set this in this system?
I have already maintained the text in the vendor master for "purchasing memo" & "purchasing order text".
but not able to bring the purcahsing memo details to the purchase order automatically.
My question is how /where to config the purchasing memo in the system so that it gets copied automatically in the PO
Thanks
Dkmurthy

Header Text from Sales Order Not Copied to Header Text Invoice.

Hello All....Does anybody have an idea why this is happening ??
My Sales Order have the Header Cl.Text Z001 "Header Text", I write text in two languaje "EN" and "ES".
Z001 Header Text (Sales Order)
         EN -->>   Hello
         ES -->>   Hola
When I create the Invoice with reference this Sales Order, this only copy the Spanish Text but not the English Text.
Z001 Header Text (Invoice)
        ES -->> Hola
Thanks in advanced.
JEOS.

Hello Jorge
Ensure that you checked the box 'All Languages' in the related access sequence.
T code VOTXN.

Overset text will not go into the text box that is part of the master for the next page

I am trying to (first time user) set up a simple trade-paperback sized book with some photos. Have set up several masters for chapter title pages, chapter inner pages, etc. When I copy text out of Word into InDesign, (copy/paste) the text overset box appears. I load it, then go to the next page, which I have already formatted using one of the masters. But when I select the desired text box ((Ctrl/shft) and click, the overset text forms a new text box, What am I doing wrong? thanks

I have done, this did work right for at least the left side of the spread, but never for the right side -
Make sure the left and right page master page text frames are threaded View>Extras>Show Text Threads. Here I have left and right page text boxes threaded on my A-master spread:
Checking Smart Text Reflow can make adding long text to master frames easier:
With Smart Text Reflow enabled I've released the master page text box on page 1, note the released frame has a solid border, while the unreleased master page frames on subsequent pages are dotted indicating they are still master page items and not page items.
The result of the paste:

Service Short Text is not copied creating Req w.r.t Contract

Hi,
When I try to create a req service item with reference to a contract, short text (TXZ01) is not copied from contract to req. The field is open for input and I have to input manually, or I'll get error ME083.
Is here a way to copy short text from contract to req automatically?
Thank you!
Regards,
Jully

Hi,
it could be due to an active user exit like EXIT_SAPLMEREQ_005 or EXIT_SAPLMEQR_001.
Please check your exits.
Regards,
Edit

How do i copy a thread in text messages and copy into a note pad app?

how do i copy a thread in text messages and copy into a note pad app?

Tap and hold a bubble, and select More. Put a checkmark beside each bubble you want to copy, then hit the arrow at bottom right. This will open a new message with the copied text in the text entry box. You can copy all of this and paste into Notes, but you lose who it came from unless you edit that in yourself.
You can also take screenshots of each window of text bubbles.

This regards Adobe Reader XI 11.0.07 and Adobe Acrobat Pro XI 11.0.07 running on Win 7. Copying text in a text callout (to paste into a text callout in another pdf document (3 instances of Adobe open) sometimes (only sometimes) causes the program to crash

This regards Adobe Reader XI 11.0.07 and Adobe Acrobat Pro XI 11.0.07 running on Win 7. Copying text in a text callout (to paste into a text callout in another pdf document (3 instances of Adobe open) sometimes (only sometimes) causes the program to crash, losing unsaved work. Windows Task Manager shows only a small percentage of cpu used and plenty of memory available. What is causing this?

scholtzkie wrote:
"Please wait...If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document. You can upgrade ... For more assistance.... Windows is either a registered trademark...."
This usually occurs if you use a browser that uses its own PDF viewer, not the Adobe Reader plugin; see http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

Copying of Header Text

Hi
How to Copy the header text that i entered in VF01 to Accounting Document(RV) or in Customer Line Item.(FBL5N)
URGENT!!!
Regards
Subhasish

Hi,
Logically speaking a header text cannot be copied into line item text.
In T.C. VOTX there is clearcut seggregation of header and line item text.
The text for line item is maintained in the master data whereas header taxt is applicable to the document type.
Hope it is helpful.
Regards

Material PO text is not copied to PR from PS

Dear team,
when we create the manual PR, "material master - purchase order text" is automatically copy to "PR item text - Material PO text"
When we create PR from PS, these text is not adopting into PR.
Could you pl provide some suitable solution for the same
Thanks & Regards
R.Saravanan

Hi Alex,
We are in SAP ECC EHP3 and therefore no need for network enhancement.
The problem is solved. It is due to the derivation rule in FMDERIVE. I have fixed by adding derivation.
Thanks for your support
regards
Srinivasan Desingh

Copy delivery header text to shipment header text

Hi All,
Please let me know the user/customer exit to copy the header text of delivery to shipment while creation(VT01N) or deletion(VT02N) of shipment for deliveries.
Please provide the code samples or procedure, if you have any.
Thanks in advance and points will be rewarded
-Venkat

Hi
Use these User exit and write the code for the same in one perform of its include this is having the delivery details and capture the same into your shipping
EXIT_SAPLV56F_010
regards
Shiva

Copy of header text to Line item text in MIRO transaction

Hello Friends,
I have a requirement where i need to copy the header text ( BSEG-SGTXT) to item text ( EKPO-TXZ01 i.e PO text) during MIRO creation.
Is there any user exit or BADI .OR is there any other method for doing the same .
Thanks and Regards !
Ashish

Dear,
Go to se37 MRM_FINAL_CHECK.--display
then click on that enhance source button ( shift+f4) then go to edit--enhancement operation ---show implicit enhancement option this is how you can find out the eh=nhancementts .
Cheers
fareed

Copy Mat. Doc Header Text to FI Doc. Header Text

Dear Guru,
Is there anyway to transfer the Material Document Header Text to the Accounting Document Header Text?
I tried to use the FI Substitution, but somehow in the substitution exit, it just cannot get the material document number from there.
Any help would be greatly appreciated! Thank you!
Regards,
Chris

Hi Kenix, yes, that's what I mean. From the database record, I can see it actually works before.
But not sure if it is because we upgraded from 4.6C to ECC6, this function is gone. Any advise?

Onetime vendor - address is not copied into the purchase order ME21N

Dear all,
I have a issue about using onetime vendors, if I have entered a dummy address on the onetime vendor, this address is not copied into the prucase order when I create a PO for this vendor type.
My problem is that we want to use the ME59 to create PO automatically for these onetime vendors but I get the message 06035 - Enter a address on the PO.
So my question is if anybody can propose a solution for this.
Best regards, LB

>
Lars Birk wrote:
> Dear all,
>
> I have a issue about using onetime vendors, if I have entered a dummy address on the onetime vendor, this address is not copied into the prucase order when I create a PO for this vendor type.
> My problem is that we want to use the ME59 to create PO automatically for these onetime vendors but I get the message 06035 - Enter a address on the PO.
> So my question is if anybody can propose a solution for this.
>
>
> Best regards, LB
One time vendor can never hold vendor specific details i.e. vendor details and bank details. You cannot use a one time vendor for ME59, use regular vendor account instead for your requirement or enter the address manually at time of conversion as per the message.
Edited by: Afshad Irani on Jul 13, 2010 1:34 PM

Condition YPS1 not copied into Billing document

Hi All,
I have an urgent issue wherein my condition YpS1 determined in the sales order is not copied into the billing document
Any suggestions would be appreciated... The YPS1 is pulled out from the standard price from the material master
Any suggestions would be appreciated
Thx,
Vinay

Thanks for the reply.really appreciate it.. On further investigation my copy control is set up in this way,
SO --> Delivery && Delivery --> Billing.
In my Billing copy control(Delivery- BillinG) i have a pricing tye set up as Customer Reserve X.... do you think i might have to check this???Please advice where to check as i do not have any idea on what this customer reserve X means??
Thanks again
Regards,
Vinay

[svn:fx-trunk] 8190: make sure the HaloClassic theme is not copied into the package b/ c it is no longer supported in flex 4

Revision: 8190
Author:   [email protected]
Date:     2009-06-24 12:26:02 -0700 (Wed, 24 Jun 2009)
Log Message:
make sure the HaloClassic theme is not copied into the package b/c it is no longer supported in flex 4
bug: https://bugs.adobe.com/jira/browse/SDK-20729
qa: no
doc:
checkintests: pass
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-20729
Modified Paths:
    flex/sdk/trunk/build.xml

Gordon, it looks like its been a while since you made this post. Not sure how valid it is now...   I am particularly interested in the LigatureLevel.NONE value. It seems that it is no longer supported.
How do I turn of ligatures in the font rendering?
My flex project involves trying to match the font rendering of Apache's Batik rendering of SVG and ligatures have been turned off in that codebase. Is there any way (even roundabout) to turn ligatures off in flash?
Thanks,
Om

Text is not copying into Header Text Type from Contract to Order & Invoice

Similar Messages

Maybe you are looking for