Text is selected one or two lines away from where cursor is located

I'm viewing a PDF in Adobe Digital Editions 4.0, and when I try to select text, it actually selects text 1-2 lines off from where the cursor (I-bar) is located. This makes highlighting text extremely difficult. The PDF was created in Acrobat from a .docx file. I've also tried creating the PDF from MS Word for Mac 2011. Same problem.
If I try opening the very same PDF file in Adobe Reader, the cursor highlights text just fine. If I open it in Preview, it works fine too. Just won't work in Adobe Digital Editions.
System: Mac OS 10.10 Yosemite

You say your Powerbook but your profile indicates a MacBook Pro. Sounds more like a hardware issue than anything else. Post over in the hardware forum area of the Mac you have.

Similar Messages

Text rolls down one or two lines

Text will roll down one or two lines after changing screens for a brief period.

try to [https://support.mozilla.org/en-US/kb/troubleshoot-extensions-themes-to-fix-problems#w_turn-off-hardware-acceleration Turn off hardware acceleration] (it is in the same session, Browsing session)
thanks again

Different ship to party for one of two line items from sales order

Hi Experts,
1. The Sales Order No.19701 is an Export Order, received from M/s. Industries & Construction, Indonesia. We have to supply all the materials on FOB Indian seaport basis.
2. However, we have to dispatch against Line Item No. 280 & 290 to one of our subvendors, M/s.Industries, sec,rabad to complete some Control Assly. as per agreed Inspection terms.
3. After completion of Control Assembly & Client's Inspection materials will be finally dispatched to nearest Seaport for seafreight.
So here i can i map this scenario from sales order to billing, ship to party for those 2 items must be sub vendor.
Thanx in advance
Madhu

Hi madhusudan
You can map different ship to party . First you need to configure customer master for the same.
Add the alternate ship to parties to customer master of sold to party, your export customer.
While creating master data for sub vendors as ship to party ,you need to maintian proper customer pricing pricing procedure and tax classification as you mentioned customer is export customer ,but ship to party seems to be domestic ,so carefully check the same. also check the shipping condition if it is separate for exports.
Then in Sales order transaction on line item data ,change your ship to party for the line item as per the the requirement.
for further processing of this scenario ,like excise invoice and ARE1 u might have lsome issues if ship to party is liable for duties and taxes and Sold to is exempt and you are drawing only one invoice for these 2 separate deliveries. pl check on the same.
I hope this helps
Revert for any queries
Regards
Mandar
Edited by: Mandar Deshpande on Apr 13, 2010 11:04 PM

Can someone explain to me what are the benefits of compound path when it comes to text? I can understand one or two lines but a whole paragraph?

Every year we do a fundraiser to help my job, but my co-worker is getting frustrated. We receive outside files laid out in Illustrator, but the person who does the file sets all of the text using compound path. These aren't one or two lines of text to be manipulated but whole paragraphs of text. This person does this every year, and it is time consuming if my co-worker can't manipulate a paragraph without going to each individual layer that has a letter. Is there a way to make these compound paths merge as one without altering the document i.e. make some element disappear. Any kind of help is appreciated.

ikaika,
As I (mis)understand it, you should simply ask this outside person to keep all text as Live Type, using a font that you have on your machines (in the exact same version) so there will be no font substitution issue(s).
That way, you could get the job done without silly waste of time.
Failing to comply would seem quite uncooperative.
I presume there is no copyright question onvolved in this.

Text flow into one or two column text boxes depending on the number of text lines

Question InDesignCS3
Is it possible to let text flow into one or two column textboxes depending on the number of text lines?
Example 1)
--Default text box--|
| Text line 1 |
| Text line 2 |
| Text line 3 |
| Text line 4 |
------------------- |
If there are more than 4 text lines in the in the text box, this box has to become a two column box. like example 2
example 2)
|Text line 1 | Text line 4 |
|Text line 2 | Text line 5 |
|Text line 3 | Text line 6 |

if (myTextFrame.lines > 4) {
myTextFrame.textFramePreferences.textColumnCount = 2;
} else {
myTextFrame.textFramePreferences.textColumnCount = 1;

Not cleared two line items from the GR/IR clearing

For one of the items in PO following transactions are done...
        Mtype   Date            Quantity             Amount
GR   101    06/14/09        1 02.001            887.85
GR   102    06/14/09        102.001-            887.85
GR   101    06/14/09        101.999             887.85
GR   101    07/22/09        102.001             923.61
IR-L            06/14/09        102.001            887.85
IR-L            06/14/09        101.999            887.85
FBL3N: out put
Open items
Doc Type Date                           Amount
WE           06/14/2009 86            887.85
WE           07/22/2009 96            923.61-
Cleared items:
Doc Type Date                           Amount
WE            06/14/2009 96              887.85-
Z9             06/09/2009 86              887.85
WE            06/14/2009 96              887.85-
Z9             06/09/2009 86              887.85
System has not cleared two line items from the GR/IR clearing for this line item in PO.
What could be the reason these items are not cleared and now how these line
items can be cleared?

Hi,
When the Dr and Cr amount are equal to zero system will automatically clear the line items in F.13. Here the open items are appearing with different amounts due to that system not able to clear.
By passing some manual JV or something you done to make Dr and Cr equal to zero then you clear through F-03(untick post automatically for this clearing in T.cdoe FS00)
Regards,
Sankar

Why can I not print from pages but can if I copy to text edit, I get "printer off line message " from pages ?

Why can I not print from pages but can if I copy to text edit, I get "printer off line message " from pages ? I use HP wireless printer .

Are you sure you have the right printer?
In UNIX/OSX printers are virtual links to devices and even with the same name can be trying to reach a printer via another network address, so it thinks it is another printer.
Peter

When i duplicate an object, it moves it far away from where my original object is as soon as i move it. is there any way to fix this?

when i duplicate an object in numbers, it moves it far away from where my original object is as soon as i move it. is there any way to fix this? thanks

Hi Rick,
Your initial duplicate should be offset by one grid unit to the right and below the location of the original. If you move that duplicate by dragging it, without first de-selecting it, then reselecting it, the place you put it will determine the offset for subsequent duplicates (from the same original or from the copy).
Example:
Initial object and first duplicate:
Pressing shift-up arrow would move the duplicate up to align with the top of the original. Pressing shift-left arrow would then place the duplicate directly in front of the original.
Without being deselected, the duplicate was dragged to the position shown:
Command-D was then pressed to duplicate the first copy:
The duplicate appeared in this position
Regards,
Barry

Hi Legands, Can any one tell me the link from where i can download ADI

Hi Legands,
Can any one tell me the link from where i can download ADI
Thank's
Bachan

Hello Prasanth,
Try this link for ABAP HR FAQ :
[SAP ERP Human Capital Management (SAP ERP HCM);
Good Luck,
Boaz

File adapter-How to set line break in text file-split record into two lines

Dear Guru's,
I have to solve following problem with XML (with mulitiple records) to TEXT file scenario using file adapter. I have to output for ever ONE data record in XML always two identical lines in text file. Second line should have a little bit different mapping in few fields like date,... So I did duplicate fileds in my output structure in mapping and need to know how to set line break in the middle and see half of structure in first line and next structure half in second line
My output structure in mapping is:
CASHFLOW
- INTERFACE
- GESELLSCHAFT
- ANWENDUNG
- PRODUKT
- VERTRAG
- BETRAG
- WAEHRUNG
- DIRECTION
- BEWEGUNGSTYP
- FAELLIGKEIT
- ZINSFESTSTELLUNG
- ZAHLUNGSTAG
- RENDITE
- INTERFACE2
- GESELLSCHAFT2
- ANWENDUNG2
- PRODUKT2
- VERTRAG2
- BETRAG2
- WAEHRUNG2
- DIRECTION2
- BEWEGUNGSTYP2
- FAELLIGKEIT2
- ZINSFESTSTELLUNG2
- ZAHLUNGSTAG2
- RENDITE2
Question is how can I set on receiving file adapter in Content Conversion Parameters that fields from first structure half INTERFACE...RENDITE should be outputed in one line and fields from second half of structure INTERFACE2...RENDITE2 should start on second line in final text file.
I'm getting at the moment one line only and I need to know how can set line break so that second line starting with INTERFACE2(CA)...RENDITE2 will start in new line.
CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",2,12,2009-01-28,2009-01-27,2009-01-28,"0.0000000",CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",1,10,2009-01-27,2009-01-27,2009-01-27,"0.0000000"
This should be final output:
CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",2,12,2009-01-28,2009-01-27,2009-01-28,"0.0000000"
CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",1,10,2009-01-27,2009-01-27,2009-01-27,"0.0000000"
My file adapter settings:
RecordsetStructure=CASHFLOW
CASHFLOW.fieldNames=INTERFACE,GESELLSCHAFT,ANWENDUNG,PRODUKT,VERTRAG,BETRAG,WAEHRUNG,DIRECTION,BEWEGUNGSTYP,FAELLIGKEIT,ZINSFESTSTELLUNG,ZAHLUNGSTAG,RENDITE
CASHFLOW.fieldSeparator=,
CASHFLOW.endSeparator='nl'
CASHFLOW.fieldNames=INTERFACE2,GESELLSCHAFT2,ANWENDUNG2,PRODUKT2,VERTRAG2,BETRAG2,WAEHRUNG2,DIRECTION2,BEWEGUNGSTYP2,FAELLIGKEIT2,ZINSFESTSTELLUNG2,ZAHLUNGSTAG2,RENDITE2
CASHFLOW.fieldSeparator=,
It wont help if I add two identical structures in mapping because in output i would see for multiple entries section with first lines only and after that section with second lines only. And CASHFLOW is one part of more complex mapping ...
(This is final output structure RecordsetStructure=HEADER,CASHFLOW,CONDITION,REFERENCE,CONTRACT - more sections with different data and all these should have duplicate lines at the end)
Thanks a lot for any help
Cheers
Marian
Edited by: Marian Luscon on Jul 14, 2009 11:44 AM

Hi Ivan,
right, I did test just for sure.
Putting constant 'nl' into field CASHFLOW-INTERFACE1 didnt help - still getting one line instead two lines.
CA ,"0100" ,"7" ,"512" ,20090127GTP101 ,-12454762586.6800 ,"EUR" ,2 ,12 ,2009-01-28 ,2009-01-27 ,2009-01-28 ,"0.0000000" ,'nl' ,"GTP1" ,"7" ,"512" ,20090127GTP101 ,-12454762586.6800 ,"EUR" ,1 ,10 ,2009-01-27 ,2009-01-27 ,2009-01-27 ,"0.0000000"
So there is still question. Is there any way (mapping,...) how to output always 2 lines in text file for one record in XML. It always does 1 record in mapping structure = 1 line but we need 2 lines ...
Example:
Input: 4 records in XML
Output: 8 lines in final text file ...
Thanks to you all guys
Marian

Refurb sub contract PO one material two line items

Hi we have the following scenario:
We have a sub contract (item category L) for a rotable spare. We create a service PO for the MATERIAL. When the invoice comes in there are two line items as we charged for materials used to repair the item at one tax rate, and the service to replair the item at another rate.
How do we goods reciept / SES this to ensure that we only get stock of one coming back in from the vendor but capture two lines in the invoice to ensure that the invoice doesn't block? So we can't create a two line item PO as the goods reciept would book two into stock.
Any suggestions?
Thanks hope this makes sence.
Other things that might help:
Single item recursive BOM
Goods issued to vendor via ME20
Legal requirement to have two lines as we are paying two rates of tax

Tracey Durkin wrote:Hi,
So we can't create a two line item PO as the goods reciept would book two into stock.
>
When you have one PO line item for Recursive BOM , and one for service, this will not book two in to stock
One will be material into stock and other will be service payments, not stock as no material is involved in service
So you can do recursive BOM for same item , at this item you can capture material used by vendor
And at the second line with item category "D" you do service entry both can have different tax codes
Thanks
Diwakar

How do I add HD space on one side and take away from the other?

Hi All,
I'm looking for some help and I have faith some people here can assist.
I recently used Apple's Boot Camp to put Windows XP on my MacBook Pro. So, I currently have 1 hard drive that is partitioned into two -- one for the mac, and the other for the PC.
I would like to add more hard drive space on the MAC side of things, and take away from some of the space on the PC side. What is the best way to go about doing this?
I've been told a program like Partition Magic or something might work...but I'm looking to see what people have done in the past and what the most successful route would be. I'm sure I'm not the only one that has done this.
Thanks so much,

Hi,
WinClone can do this http://twocanoes.com/winclone/
And in the WinClone FAQs https://www.twocanoes.com/forums/viewtopic.php?t=515 - Section "My current Windows partition is the wrong size, and I want to make it larger. How do I do this?" you find a how-to.
Some payable apps like iPartition and/or Drive Genius also claim to be able to resize.
Regards
Stefan

This may qualify as inept problem of the year. Opened a tube of crazy glue about two feet away from open mac book pro and it exploded about two drop of glue on my screen. What to do?

This may qualify as inept problem of the year. Opened tube of crazy glue with a pin down the nozzle and the interior pressure squirted two tiny shots of glue onto screen. I was two or so feet away from Mac Book Pro. Tried to remove them quickly but of course that only left behind two smudges. Any ideas?

Take the computer to an Apple store or an AASP. Whichever is more convenient for you. Will be cheaper than paying for a new screen if you scratch or tear it using a razor blade.

I'm having trouble with "maps" on Macbook Pro, iPad and iPhone. It shows my current location and hour away from where I am. As soon as a move iPhone away from my wifi at home to cellular it shows my correct location. No help from Time Warner.

What can I do to get "maps" to work on my Macbook Pro, iPad and iPhone when connected to wifi at home. iPhone "maps" work fine when connected to cellular service. Maps on wifi shows me about 55 minutes away from my current location. Very frustrating. I called Time Warne,r my service provider, but they had no answers since they were not knowledgeable of this situation. Anyone else having problem? I just updated all devices to newest update. Is that the problem.

Did you bring your wireless router with you? If so, it's possible the iPad is getting its location through the router and the router still "thinks" it's where you used to live.
Try taking your iPad to another location where there is wifi (such as a coffee shop). Then, try an app that uses location services. If it's accurate at another location, then the source of your problem is your router.
~Lyssa

Change print driver settings on canon printer to select one or two sided printing

My Canon print driver prints double sided by default. I want to change to single sided, or be able to select single or double on a per document basis. How do I change my print driver settings?

Here is the solution I used.
The Print driver for Canon, UFRII will default to double sided printing.
Select a document, and select Print.
Open Presets and select Show Presets (this step may not be necessary)
Open Layout, then open Finishing. Change Prunt Style to One side or one page
Open Presets and Save Current Setting. At this point you can change the name of the preset (one page) and select if the chafe is for only the selected printer or all (Canon) printers.
This sure seemed harder than it should be.

Text is selected one or two lines away from where cursor is located

Similar Messages

Maybe you are looking for