Text layers from PSD is converted as images when imported to Muse

I want to import text layers from PSD files into Muse as text and not as images. Currently when I insert the text layers, they are converted into images. Is there a way to do this?

Hi Jeffree, I have lot of content in my page and I need the same exact position of the text in my page. I am trying to automate it so that I can avoid copy paste error. Is there a way to make the psd text layer import to export as text in MUSE?
Appreciate your help.

Similar Messages

  • Iphoto is blacking out vertical images when importing.  how do i fix this?

    iphoto is blacking out vertical images when importing. how do i fix this?

    There are 9 different versions of iPhoto and they run on eight different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. What were you doing when the problem arose?
    - Did it ever work properly?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    Anything else you can think of that might allow someone else to understand your issue.

  • Drag & Drop or Duplicate layers from PSD to JPEG when creating action

    Hey everyone,
    I have been trying the last few hours to create an instagram Polaroid action for my JPEG files.
    I have the picture, and i have the PSD file with a few layers such as virulence gradient map etc...
    When creating the action, first I drag all the layers from my PSD to the JPEG file. Problem is, every time when i finish recording the action, photoshop doesnt seem to know or understand the layers i moved.
    It keeps running, without copying the layers.
    I tried to do it the other way around - recording - opening the PSD - dragging the JPEG (which this time worked)
    but then, when saving the file, it cant be saved as JPEG, because i last modified the psd file. and it will not work when doing batch because i opened specific JPEG when recording.
    I have no problem saving the PSD as PNG, then just running it which will work fine.
    But problem is when flattening, then i just lost the layers which create the effect.
    Any help?
    Thanks

    anyone?

  • How i prevent text converting into image when exporting as a HTML FORMAT IN ADOBE FIREWORKS?

    ]I am an architect and wants to design my basic website with minimum graphics.
    I am using coreldraw for graphics design but it is related to print (Hardcopies) and corel is not smart soft compared to adobe software.
    So, for web design, I started to learn Fireworks. After some practice, i m able to design web graphics in fireworks.
    But the main problem is that, when that page is exported into html format. All text were converted into Image and it is not useful.

    Fireworks was devdeloped to use with Dreamweaver. It's not a stand alone app for developing web pages. Adobe Muse might be more the kind of app you are looking for. First, however, Give this tutorial a try.
    http://www.adobe.com/devnet/fireworks/articles/css_export_rectangles.html

  • Why do I get two images when importing from i-photo into aperture

    Guys
    I am a new convert to Mac's and am a keen amateur photographer ,I have transfered my photo library from my old pc into i-photo initially which worked fine and for my photo editing package I have loaded up aperture 3.When I transfer RAW photos from I-photo library into Aperture I end up with two raw images of the same photo one is called 'i-photo original raw' and the other ' i-photo edited raw ' I think I am probably missing a trick somewhere but am worried I will rapidly fill up file space with all these raw images.

    When you import a Raw to iPhoto it automatically makes a jpeg Preview of the shot. Why? Because you can't do anything with Raw - can't print it, share it online, use it in other apps etc. So to allow you to use the file immediately the Preview is available. That's the second file you're getting.
    You're not trying to use iPhoto and Aperture together are you? It's a waste of time and a cause of some frustration. Aperture is a complete replacement for iphoto, and you're really better off picking one horse to ride and forget about the other. Like iphoto, Aperture is a Photo Manager and post processor - but rather more powerful. Both apps are database driven. Aperture is not an "editing package".
    If you do opt to stay with iPhoto then use an editor like Photoshop, Elements, Acorn, Pixelmator etc as your editng package.
    Regards
    TD

  • Pixelated Images when Importing from SD Card

    Hi there,
    Im having a recurring issue when importing images from my SD Card.
    The issue is that when I try to view in the 'Loupe' view, the images don't load at full size, the '1:1' is absolutely tiny?
    Any ideas??
    Thank you.

    Yeah, the black bars at the top and bottom of the tiny preview indicate it is a camera thumbnail, not a large-sized preview embedded in the raw file.  Without seeing the raw file, itself, it’s hard to know if there is actually a reasonable-sized preview embedded in it or just the tiny thumbnail.  If you want someone else to take a look, upload a raw file to http://www.dropbox.com/ and post a public download link to it, here.
    And more importantly, as was just asked, does the image import ok.  If so then you’ll just have to do the importing, first, before you sort through what you want.

  • Problems applying metadata to images when importing from device

    When importing images from a device into lightroom 2 I have created and selected a metadata template in the information to apply section, but when importing the images to the lightroom library it does not apply the metadata to the images. Can anyone help?

    You mean you're importing directly from an USB-attached camera?
    If you import from a card reader, do the templates apply?

  • Downsized images when imported from Aperture

    The latest batch if images I imported into iPhoto from Aperture were somehow downsized to half the size, ie from 3888x2592 to 1944x1296.  In other words, cut in half.  This has never happened before.  Previously, the iPhoto image had the same dimensions as the image in Aperture.  Would this have something to do with Lion?  I need images with over 3000 pixels on at least one side to sell them.  Thanks.  Larryt

    How did you "import into iPhoto from Aperture"?
    If you're using the media browser (File -> Show Aperture Library) then what you're getting are you Aperture Previews. The size of these is set in your Aperture Preferences.
    If you exported from Aperture then the export preset you used in Aperture is what defines the size of the image.
    So, no, this has nothing to do with Lion and only to do with the settings you are using in Aperture.
    I can't help but wonder though, why you are using iPhoto at all, if you use Aperture. Is this complexity necessary?

  • IPhoto darkens images when importing

    I've just been importing some photos into iPhoto 6 and I've noticed that quite a few pictures have been noticeably darkened, and I have no idea why! I checked in the folder and the darker photo does not appear in the folder of 'Modified' photos, but in the 'Originals' folder.
    If I open up the same image from my desktop in Preview and comare it side-by-side with the same image I imported into iPhoto I can immediately see the difference. The problem is really a darkening in areas of shadown.
    Is iPhoto somehow thinking it is 'enhancing' my photos, but this just doesn't work on some photos or what? I just want the imported image to look identical to what I see when opening the file with Preview on the very same computer. That's not really asking too much.

    I've figured out my own problem. iPhoto was set up to assign photos with a ColorSync profile and this profile made the photo look darker.

  • Partial rotation of images when importing...

    I'm wondering how to stop Lightroom from "squaring up" my images when I import them.  Attached is a screen shot to illustrate.
    I also can't find any consistentency, if I import the same image three times it will be as above twice but not on the third time!
    I'm wondering if this is a metadata thing?
    BTW camera is a Nikon D600.
    With thanks in advance,
    -Simon

    If this is only happening to a few of the images on import it is most likely something related to your camera. If ALL of the Imported images exhibit the issue then there are two things in LR that could cause this to happen:
    1) You are applying a Develop preset on Import that has  Lens Corrections> Manual> Rotate tool setting other than '0.'
    2) Your LR 'Default Develop Settings' has a Crop Angle tool or Lens Corrections> Manual> Rotate tool setting other than '0.'
    To check this import one of the images from CF card that shows the rotation. Examine the Crop Angle tool and Lens Corrections> Manual> Rotate tool settings to determine which one is being applied. From inside the Develop module with the imported image still rotated hit the master 'Reset' button at the bottom of the right-hand Develop panel. This applies your LR 'Default Develop Settings.'
    a) If the image is still rotated you may have inadvertently updated your LR 'Default Develop Settings' in the past with the image rotated. To correct this simply hit the master 'Reset' button, reset both the Crop Angle tool and Manual Rotate tools to '0,' go to toolbar Develop> Set Default settings, and select 'Update to Current Settings.'
    b) If the image is not rotated you are probably applying a Develop preset that was inadvertently created with the image rotated. You will need to recreate this preset making sure Lens Corrections> 'Transform' is unchecked. This is the only Develop preset setting that will rotate the image as in your example.
    If neither a or b fixes the issue you can try resetting your LR Preferences file:
    http://members.lightroomqueen.com/Knowledgebase/Article/View/1148/198/how-do-i-delete-the- lightroom-preferences-file

  • Duration of still images when importing

    Hello,
    just a quick one that has puzzled (and bothered) me for some time now. I guess it's my doing something wrong in the first place, but then again it's Monday, so I can do with some bad news to ease into the week.....
    As far as I know, it's possible to tell FCP how long you want stills to be when you import them. Go to the user preferences, set still duration under the edit tab to, say, 5 secs and FCP should import stills at a length of 5 ecs. Right?
    Well, whenever I try that, my stills are only 4.05 secs, and setting the still duration to 10.00 secs in the preferences gives me stills in FCP that are 8.08 secs long. Is there something I'm missing?
    I've tried several formats, JPGE, PDFs, TIFs, PSDs, PICTs, TARGAs, PNGs....all show the same behaviour.
    Of course I could fix the duration in the browser or in the Timeline, but it would be much easier if I could import stills at the proper duration in the first place.
    Any ideas?
    Thanks a bunch, and hope you all have a good week ahead of you,
    Colin

    I just did some testing on this, and it seems like the Still/Freeze Duration, Preview Pre and Post-Roll changes depending on what audio/video settings you have chosen. Try selecting DV NTSC in Easy Setup. Then check your User Preferences -> Editing.
    DV NTSC:
    Still/Freeze Duration: 00:00:10:00
    Preview Pre-Roll: 00:00:05:00
    Preview Post-Roll: 00:00:02:00
    Try switching to DV PAL in Easy Setup, and check your User Preferences -> Editing again.
    DV PAL:
    Still/Freeze Duration: 00:00:12:00
    Preview Pre-Roll: 00:00:06:00
    Preview Post-Roll: 00:00:02:10
    When importing still images using the DV PAL Easy Setup, the stills get a duration of 10 seconds, even though the User Preferences -> Editing are set to 00:00:12:00.
    Can somebody please explain why it is like this? I hope there is a logical explanation

  • How do you stop adjustments to the image when importing pictures?

    When I import pictures into Lightroom 1.1 they all automatically get adjusted to be much brighter. How do I stop this? The DEVELOP SETTINGS DIALOG in the IMPORT PHOTOS pop up box is set to NONE. I don't think it's a color management issue as the images are imported with a normal brightness/color balance and then get their settings changed one by one. Opening an image in Photoshop CS3 with the EDIT A COPY WITH LIGHTROOM ADJUSTMENTS radio selected opens up the modified brightened image. Opening that same image in Photoshop CS3 with the EDIT ORIGINAL radio selected opens a normal image with correct brightness/color balance.
    This is driving me mad! I don't want these adjustments. Please help!

    It's not turned on by default, that I know of. Somehow, yours got that way.
    As to where it's located, I would like the preferences to be distributed around the application rather than concentrated in one place. I agree with you that this one should be in the import dialog.

  • How can I parse text color from PSD

    Hi all, I am writing a parser of PSD in Java, but I just can't find the color of each character; I thought they were in Additional Layer Information of Layer and Mask Information Section. I have a text layer with a string, and each character has different color.
    Please help. thanks.

    Modifying the properties of a control in a subVI do not modify the properties of a different control in the main VI. The data is the only thing passed back from the subVI. To modify the properties of the table in the main, you need to pass a reference to it to the subVI and modify it's properties. I've attached a modified llb that does what you want.
    Attachments:
    Main_color_Table_mod.llb ‏41 KB

  • Text layers from .txt file for buisness cards

    I have a template for a business card that I created for a company. So  imagine I have a background layer which is the card itself, and above  that a layer for each string of text on the card (name, title, phone,  email). Up until now, I would manually enter all the information using  the Type tool to edit each text layer. However, it has become very  tedious and I know there has to be a much easier way to do this. I'm  looking for a way to automate this process.  So far I have created an Excel database of all the  employees, and I export each employees information to a .txt file that  looks like this:
    John Doe
    Job Title
    123-456-7890
    123-456-7890
    [email protected]
    Each line in the .txt file corresponds to a text layer on the .psd. I've  tried following a tutorial from the web (kirupa.com - Photoshop Scripting) but he is creating  them in batches which is not what I need to do. And quite frankly, it's  a bit over my head. I know scripting must be the way, but unfortunately  I don't know much about JaveScript or any  other language for that matter.
    I know it's a lot to ask for, but if anyone could show me how to write a  simple script for this or point me in the right direction, it would be  much appreciated. And I mean MUCH!

    Hey man, that was spot on! This does exactly what I was looking for, now scripting required. Thanks for the help, I really appreciate it.

  • Going from PSD file to Illustrator image trace: Background not transparent

    Okay guys so a friend has drawn me a "man" in Psd and I want to convert it in AI because I don't want it to look very pixely (great scientific term). The man is on a transparent layer as below:
    I was then able to bring it into illustrator fine. I used the image trace function and got some great results. The image looks more as I intended.(below). The only problem is the transparent layer goes and is replaced by a white layer. This "man" needs to be placed on top of other elements and so the bg needs to be transparent. I've scoured the forums but couldn't find a conversion topic specific to the image trace function. Is there a way to do this without the bg turning white? Am I importing the file wrong into illustrator? Is it the settings of the image trace function? I'm very new to illustrator so would very much appreciate all the help I can get.
    Cheers,
    Cam.               

    look at your trace settings and (in CS5 at least) tick Ignore white.

Maybe you are looking for