Text maddaging issue

Hello everyone i hav iphone 5 and i had an issue with imassage so ive been told dat i shod ubdate to ios 6.1 so i did as well and the imassage is sending nw bt i cant send text massages

Any help plz

Similar Messages

Text wrap issue:ShowDetaillItem chop-off in the PanelAccordion.

Issue: Text wrap issue in ShowDetailItem header. Tittle of the S+howDetaillItem+ chop-off does not display completely in the PanelAccordion.
I have a few texts that does not wrap in ShowDetailItem Header used for the panel accordion. I could not fix it after trying a few options like changing the css skin, and in the design property inspector.
Please suggest a way to fix this.
Oracle Jdeveloper 11.1.1.5 is the version.
Windows XP professional sp3
Edited by: 899970 on Nov 30, 2011 11:34 AM

Thanks for your response.
Yes, we dont have enough room on the page.
I want the text to wrap and display in the second line as it has more no. of letters compared to the other texts available.
Please suggest me a way to get the text displayed the way I want it to be.
Thanks
Sam
Edited by: 899970 on Nov 30, 2011 3:13 PM

Text justification issue in crystal report

Hi,
I have MVC application with crystal report in it. I am exporting crystal report to PDF, everything except text justification (as we do in MS-Word) is not working. Even in crystal report viewer itself it's not working.
I have been trying since few days to solve text justification problem in CR. Well I have goggled a lot for this and found different available option to get the thing done. But that didn't solved my problem, I have read many replies on the crystal report discussion regarding the same but no result. I have tried four different versions of crystal report (13.0.5,13.0.6,13.0.9,13.0.13) as I found on the web that justify could work in these versions, but I was shocked when I didn't get anything useful.
For me it's like justify doesn't work in crystal report by any means. Can any one here tell me who has solved the text justification problem in crystal report. I have attached sample screen shot of word document where in I have specified my requirement of text justification.
Any positive reply would be highly appreciated.
-Sunny

Duplicate thread - Locked. Please continue discussion here:
Re: Text justification issue in crystal report
-Abhilash

Text tool issue resolved with new upgrade

It appears the text tool issue has been resolved with the new upgrade, now you don't have to use the transform function to move titles
now the text tool converts to the move arrow tool as expected.
They said it was a Lion's bug.
Thanks,
AppleLou

If it's a "Mobility" card then chances are it's in a laptop, and many laptop manufacturers are required to be the source for driver updates. You might have
to check with the computer maker.
If there's not a driver update for it, it's possible you could try downgrading the driver to an older version if one can be found.
What operating system are you running (XP, Vista, 7, 32 or 64 bit)?
I see they have a new release for your card for Vista and Windows 7 32 bit, for example, here: http://support.amd.com/us/gpudownload/windows/Pages/radeonmob_win7-32.aspx
-Noel

I have had text messaging issues. The messages disappear or never show up

I have had my Samsung ATIV SE for over six months now and have had it replaced to resolve a text messaging issue but the problem still exists and no one has been able to help me. Text messages randomly disappear. I just had a two week block of messages disappear for no apparent reason. I need a resolution and not sure where to turn. I was sent to Samsung and Microsoft and no one has been able to help me!!

tomcat1015,
It doesn't have to be any one in particular. I suggest going into the app store and doing a quick search for SMS. Pick one that seems reasonable to you. Our main interest is seeing if this has something to do with your line of service in general or if we can narrow it down to the phone/app.
SandyS_VZW
Follow us on Twitter @VZWSupport

Treo Pro Text draft issue

When I get a text and open it, it creates a draft message just by opening it to read it, as if I chose reply instead of open. The second issue is I use the "cut through paging" for business calls(they choose option 2 from my VM and it sends their caller id or number they manually enter as a text to my phone, instead of getting a lot of VM's) and the weird thing is that if the caller is a contact in my phone(most are) it just shows their name and does not specify the number they want me to call. Even weirder, if I delete the message, I can go into the deleted message file and it does show the number and looks like texts looked on my previous Treo 800w in the inbox. Is there any fixes for this that anyone knows of for these issues? I did the update for the date issue and that worked fine. Thanks in advance for any help that can be offered.

Are you sync'ing the videos to the Treo or downloading them from the internet directly to the Treo?
Those file types should play Ok on the Treo.
Click on the following link for the support page for your device on the kb.palm.com webpage.
http://www.palm.com/us/support/treopro/t850una_unl/
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
On page 208 of the user guide is the start of the section regarding videos on the Treo Pro.
Post relates to: Palm i705

Rich Text Box Issue - Expand to show all Text

Hi everyone
I'm having a pretty frustrating issue with the rich text box when viewing a line item (not when editing the item, but viewing the item)
I want my rich text box to expand with the text, which I have changed in the options on InfoPath with the "Expand to show all text" scrolling option. However, in IE, the table row will expand, but the actual rich text box will not and I'll have
a scroll bar there and you cant see all of the text at one time. If I look in Chrome, then it works the way I want and I can see all of the lines of text that were entered into the rich text box.
The only solution for IE to work correctly is to change the Display settings to "Enable enhanced rich text content...". But the big issue with that is now you can no longer highlight the text (the highlight disappears right after highlighting it),
and the users will need to copy text from the text box, so it renders the "enhanced" rich text box useless for us
It's kind of a lose-lose situation that I'd love to find the solution for

I guess a better solution would be how can you highlight text from an enhanced rich text box, because changing these to "rich text box" gets rid of font colors in the pre-existing data.
The original problem was that they couldn't highlight text unless they went into edit mode

LG Env3 text message issues

My mom uses a LG Env 3 phone. Recently, she is having issues receiving some text messages. She used to receive a group text message sent from my iphone to her and my sister who also has an iphone. This seems to have stopped worked since my sister and I upgraded to IOS 8. Also, when I send her a picture message now, she gets a message that the retrieval failed, but the message does go through. Because of the failure message, the normal message ringtone does not alert her of the new message. She is also receiving messages that just show as all small squares but I believe this to be messages that contain emoticons. I'm just wondering if upgrading to the LG Extravert 2 or LG Cosmos 3 will make any difference or if she will still have problems receiving messages from newer phones/operating systems. She does not want/need a smartphone at this time. Any advice/insight would be appreciated. Thanks!

mtmuddler,
I apologize for the inconvenience this might be causing. Is she able to recieve messages from other phones? Try deleting old messages to make room for new ones. This will help clear memory on the phone which can be preventing the text messages to appear. Keep us updated.
YareliM_VZW
Follow us on Twitter at @VZWSupport

RIch text forum issue since reinstall of OS

Ever since I reinstalled my system software (10.4.11), I have been unable to utilize rich text editor options available for forum posting. (not this forum - about.com is one of them). In Safari, the editor toolbar is non-existent when posting/editing a post, and my individual paragraphs display as one huge paragraphs rather than individual ones. I'm not having this problem in Firefox. In Firefox, the rich text editor appears (bold, italic, etc. buttons), as do options for "design" and "HTML"—all missing in Safari.
Previous to the reinstall, I was not having this issue in Safari. Paragraphs were created by hitting "return", not inserting html code.
I'm wondering if there is a setting, or plugin, that was present in my old system that did not get installed, which is contributing to why Safari has omitted these options as opposed to Firefox.
Thanks!

No I haven't tried another mouse, but the malfunctions started as soon as OSX 10.6.4 was installed, so I deduced that it was a software rather than a hardware issue. I will however try another mouse.

CS4 Text Wrap issue - HELP!

HELP! I taught myself PageMaker 6.5 and I got REALLY good at the basics, but not so great at the in-depth things. Consequently, when I upgraded to InDesign CS4, the same holds true, so please feel free to treat me like a 2-year-old in your explanations. Now for my dilemma:
I create a quarterly magazine. Most of the pages are 2- or 3-column spreads. Many times, a photograph (and its caption) will span more than just one column, but not necessarily the entire width of two. In other words, my photo could span all of column 1 and 1/2 of column 2, with the text flowing to the right of the photograph, then expanding to fill all of column no. 2 beneath it. In PageMaker, when I text-wrapped around the pic, leaving enough bottom text wrap to insert my captioning, the text would wrap perfectly, keeping the text in perfect alignment horizontally across the columns. That, in turn, kept the bottom edge of all my columns exactly equal.
In InDesign, however, that's not the case. The text doesn't align equally horizontally across the columns, hence ruining my clean horizontal text margin at the bottom. This happens any time I have a photo that spans all of one and part of one (or two, in the case of a centered photograph) column. In fact, even if I place a photo that fits within just one column, the horizontal text alignment gets screwed up. I'm attaching a .pdf of page 35 of the issue I'm working on to show you what I mean.
I've tried choosing all three columns and clicking the "align top edges," but that just drags all three columns up to the 1/2 inch margin at the top of the page, and my text actually starts 1/4" beneath that (3/4" from the top page edge) because of the page numbering, and when I drag all three columns back down to the 3/4" mark, the wrapping gets all screwed up again. So I tried "align bottom edges," and that didn't work either (it worked to a point... anything that actually had text flowing to the bottom of the column was fine, the same thing occurred then above the column with a photo spanning all of it. Geez, I'm confused just trying to explain it. Hopefully, the attached .pdf will help make sense of this.
Consequently, I'm moving columns manually for this issue (all 60 pages of it), because it has to be at the printers by the end of the weekend and I'm just plain out of time. If anyone can give me some guidance so I don't have to do this again next time, I'd really appreciate it.
You can email me at [email protected] if you have any ideas. Thanks for your help.
Barb

Thanks so much to both Peter and Bob. I'm sure this will fix the problem. At least I know it wasn't something I was doing wrong and it really is a glitch in the program. I'll play with the baseline grid, since it seems that will be the best option. I have a few months to experiment with it before the next issue goes to press.
Does setting a preference act like a default? In other words, will it then apply to all pages in all new documents I create or is it specific to the document in which I'm working when I set it? If the latter, I'm guessing I can just include it when I set up my master page so it will apply throughout the issue? Which, of course brings me to yet another question: how do I save my Master Pages so I don't have to redo them with each issue?
I'm finding that the majority of InDesign is a lot more user-friendly and easier to navigate than the old PageMaker -- many fewer steps for the same end result. I hope to take a class if I can find one in my area, because I'm certain I'm doing many things the "hard way." Learning as you go is okay, but you miss a lot of the finer points along the way and spend entirely too much time trying to figure things out or bugging people like you in this forum.
I apologize if some of what I ask seems rather elementary.
And Scott, sorry, but I've always felt that, out of all the fonts available, Comic Sans is the most readable.
Barb

Text wrap issue

I had graphic elements on a page that I had text wrapped around correctly. I dedcided I was going to use those elements for all pages, so I moved them to the masters. When I did that, the text wrap went away. It still shows up on the master pages, but its not applying to any of the document pages.
I can fix this manually, but I have to believe as good a program as ID is, that this little issue can't have been overlooked.
Anyone out there have a solution?
Thanks

That was one of the short-comings of earlier versions of ID -- Text wrap on a master item only worked on the other master page items, not on a live page.
Short of scripting, about the best option I can think of is to select it on the master page and cut it it to the clipboard, then "paste in place" on each live page, which is a real pain in the neck.
I'd definitely ask in the scripting forum if anyone has a script for CS2 already written.

SO_NEW_DOCUMENT_ATT_SEND_API1 Text attachment issue after upgrade 4.7 to ECC6

Hi,
We are using function module so_new_document_att_send_api1 for sending mail with text document. It was working fine 4.7 system but in ECC system it is sending blank attachement with mail. Program remain same and no changes in that. I have attached code. please advise how to resolve this issue.
Thanks

Hello Venu,
Move attachment to packinglist internal table and clear lt_packing_list-transf_bin as below.
I copied your code and did some correction.
* lt_packing_list-transf_bin = 'X'.
   lt_packing_list-head_start = 2.
   lt_packing_list-head_num    = 1.
   lt_packing_list-body_start = LINES( lt_mailtxt ) + 1.
   APPEND LINES OF lt_attachment TO lt_mailtxt.
   lt_packing_list-body_num    = LINES( lt_attachment ).
   lt_packing_list-doc_type    = 'RAW'. " You can give RAW incase if you want just a txt file.
   lt_packing_list-obj_name    = 'data.txt'.
   lt_packing_list-obj_descr   = 'data.txt'.
   lt_packing_list-doc_size    = lt_packing_list-body_num * 255.
   APPEND lt_packing_list. CLEAR lt_packing_list.
In FM SO_NEW_DOCUMENT_ATT_SEND_ATI1, no need to pass the ITAB attachment i fyou can merge everything to ITAB packing list.

Calendar, Contact, Text message issue after upgrdading to 10.2.0.415

Dear BB expert,
During using after upgrading to os 10.2.0.415 (1767), I've met some following issues, they make me uncomfortable, and I think everyone like me. Please help to resolve or inform to Blackberry in order to fix in next release.
1. Calendar:
1.1. Calendar always chooses BBLink as default:
When I create an event (by: open Calendar app, pick a day and add an event), app always choose BBLink as default, while I want event is Home (Local Calendar), though I had gone into manage and chosen ‘Home (Local Calendar)' before. I always must choose again. Please help to resolve.
1.2. There are some/a lot of events that I've added before but current I don't remember them, so I must go through each month to look for, this make me inflexible. I want Calendar app has a menu called 'All entry' that When I pick it all events will show as a list. As you see, this thing will be very comfortable.
2. Contact:
2.1. Search field does not show x (clear) when I do not focus there, mean that, When I enter text into search field, press Enter, then pick a contact, after that I go back, text box of search field will not show (x), I must pick it, then (x) icon will be visible. This make me inflexible, uncomfortable, I want search field always show (x). It seems previous os had this thing.
2.2. I don't understand why facebook contact always show in Contact app, though I set it off in Settings, I set again again again, and then everything does not change, It is still showed in Contact, just it. I have Google contact, BBM, BBLink, and they are in off setting. There is only Facebook contact that is always showed.
2.3. How to create group contact in Contact app, this function is a basic function in old device, sometime I send message to a group of contact, how to do it. I want it appears in next release.
3. Message:
As you known, Text message has issue when conversation becomes long (a lot of message in conversation). When I pick a contact in Text message, some time, it is hang/freeze, no message is showed, cannot send new message,…Please fix issue in next release.
Please help to resolve or inform Blackberry,
Thank you very much,
Look forward to hearing from you.

Thanks to both of you for your helpful insights. Oracle Support confirms that the OCR has been corrupted. We can start the db using SQL*Plus, but SRVCTL will not start the db. I did a SRVCTL CONFIG and noticed that the cluster database was not listed, so I tried a SRVCTL ADD DATABASE. That failed, too.
We are going to try to restore the OCR from an OCR backup prior to the upgrade. Oracle Support, after analyzing our logs and other configuration data, recommeded Metalink note 371378.1 as a guide to restoring the OCR backup. Other Metalink notes I found in my research, that were helpful, are 259301.1, 275919.1 and 330358.1.
Again, thank you for your insights and suggestions. I will update this thread after we restore the OCR tonight from backup.

LineChart and -fx-text-fill issue: how do I change the color of the labels

Hello everyone,
I'm currently facing an issue when I'm trying to style my LineChart with some CSS. Indeed I would like to change the color of the labels of my xAxis (CategoryAxis) and yAxis (NumberAxis) but it's not working.
In my FXML file I tried to use the style attribute on my LineChart tag using: <LineChart style="-fx-text-fill: white"> with no result, the text remains black (even for the title of my chart). In order to know if the style attribute is well parsed I changed it to: style="-fx-background-color: red; -fx-text-fill: white;". The background is becoming red but the text still remains black.
Finally I tried to define a stylesheet in my controller class with the same properties (red background and white text). My stylesheet is this one:
.chart {
-fx-text-fill: white;
-fx-background-color: red;
}In my controller I do the following line in order to load my CSS file:
this.chart.getStylesheets().add(getClass().getResource("statistics-style.css").toExternalForm());Even with this option the text remains white, while the background becomes red.
What I also tried is to put the -fx-text-file CSS property directly on my axises, but again it seems it is ignored.
I followed the steps described in Figure 8-2 of this site: http://docs.oracle.com/javafx/2/charts/css-styles.htm
Does anybody have an idea or encountered this issue?
Thank you very much,
Thierry.
PS: I'm using JFX 2.1 on MacOS X
Edited by: twasyl on May 8, 2012 7:57 AM
Edited by: twasyl on May 8, 2012 7:59 AM

Hi,
I figured a solution out to solve my problem. Currently in the documentation it is said to redefine the .chart CSS class in order to change the color of the title and labels text. But this is not working. Strangely the following code changes the font-size of both title and labels but ignores the -fx-text-fill property:
.chart {
-fx-font-size: 20pt;
-fx-text-fill: white;
}In order to change the color of the title I override the .chart-title CSS class:
.chart-title {
-fx-text-fill: white;
}And for the labels:
.axis-label {
-fx-text-fill: white;
}Well I don't know if there still is a bug on the .chart CSS class or maybe that behavior is expected.

Text Wrapping issue in Long Texts in ECC 6.0

Hi,
We are migrating Tasklist data from SAP 3.1i system to SAP 6.0. So we were moving the existing Long Text in 3.1i with the same paramenters to 6.0, I am facing an issue of text Wrapping(while displaying).
I am updating complete header data like - TDID, TDOBJECT, TDNAME, Lang, TDFORM(SYSTEM as in 3.1i), Version, Line Size(72 as in 3.1i), Number of Lines by using SAVE_TEXT FM.
I can see the text is updated properly but when i open the text in display mode(With PC Editor), i can see the text getting wrapped. Line size is limited to 40 Characters whereas in 3.1i its 72 characters.
Please help me here.
Thank you.
Prasad

Actually i tested with READ_TEXT function module. All parameters are fine, matches exactly with 3.1i but i am facing this issue while displaying.
In display mode - in 3.1i Ruler shows 7.2 Inches(72 Characters) whereas in 6.0 its 4 inches(40 Characters). Should i go for any settings change so that i can see complete 72 characters in 1 line.
Prasad

Text maddaging issue

Similar Messages

Maybe you are looking for