Text Maintenance behind IT0002 and IT0009
Hello,
We got a requirement to enable the Text Maintenance for IT0002 and IT0009.
When going to SPRO -> Personnel Management ->Personnel Administration -> Customizing Procedures -> Infotypes -> Infotypes -> IT02 the Copy Infotype box is checked. When trying to uncheck the Copy Infotype box and check the Text allowed box and save I am getting the following error hard error
Text maintenance not permitted as infotype part of Data Sharing (T582G).
Any help would be greatly appreciated.
Thank you,
Aranka
Dear Aranka,
You are getting this error because these infotypes have an entry in T582G (shared infotype) in your system. When infotype are shared then the maintenance of text for these infotypes is not allwed, thus the error message in T582A.
No if you do not need this infotype to be shared (if you are not using concurrent employment/or global employement) then you can remove these entries in T582G, then you will be allowed to select the text maintenance check box.
Hope this help
Best regards
Sarah
Similar Messages
-
Text disappearing behind a graphic
Another problem with a PDF from QuarkXPress. there is a graphical element and text that is flowing around and over the graphic. I tagged the text and the graphic. Now it seems that parts of the text disappeared behind the graphic. I dont know how to get it back to the front. I would appreciate any help.
This is common when tagging a PDF for 508 compliance. The text is hiding behind the box. You can try fixing this using the Order pane, or for a greater degree of control use the Content pane. The elements that make up the white box (which are probably artifacted path elements in the Content pane) need to be positioned before the text in the content structure.
-
Text maintenance only possible if you logon in original language message
Hi,
I am trying to change the descrption of a role in transaction PFCG and I am getting the following message "Text maintenance only possible if you logon in original language DE".
Can someone let me know what needs to be done.
ThanksHi Shiv,
Have you seen OSS note 854311...it may help you here. -
Connection Problem while client is behind proxy and server out side proxy
hello
i implemented ChatApplication in JAVA, for that i used socket connection when client and server both are in same network then it's working fine.
but when my server is on internate and client is behind proxy and try to connect with server
it not able to connect i get exception.
i serch most of forum i got same answer and i try it but i was not success.
any kind of help is appriciated.
i attached my code(which i implement for testing ) pls reply me
thanks in advance.
Server.java
import java.lang.*;
import java.io.*;
import java.net.*;
class Server {
public static void main(String args[]) {
String data = "you are successfully connected with server.";
try {
ServerSocket srvs = new ServerSocket(1234);
Socket skt = srvs.accept();
System.out.print("Server has connected!\n");
PrintWriter out = new PrintWriter(skt.getOutputStream(), true);
System.out.print("Sending string: '" + data + "\n");
out.print(data);
out.close();
skt.close();
srvs.close();
catch(Exception e) {
System.out.print("Whoops! It didn't work!\n");
ProxyClient.java
import java.io.*;
import java.net.*;
import java.util.*;
class ProxyClient{
public static void main(String args[]) {
String host="61.17.212.29";
int port=1234;
String line;
Properties properties = System.getProperties();
/*properties.put("firewallSet", "true");
properties.put("firewallHost", "192.168.0.1");
properties.put("firewallPort", "808");*/
properties.put("socksProxySet","true");
properties.put("socksProxyHost", "192.168.0.1");
properties.put("socksProxyPort", "1080");
System.setProperties (properties);
try {
/*SocketAddress addr = new InetSocketAddress("192.168.0.1", 1080);
Proxy proxy = new Proxy(Proxy.Type.SOCKS, addr);
Socket skt = new Socket(proxy);
InetSocketAddress dest = new InetSocketAddress("61.17.212.29",1234);
skt.connect(dest);*/
System.out.println("before socket taken");
Socket skt = new Socket(host,port);
System.out.println("after socket taken");
BufferedReader networkBin = new BufferedReader(new InputStreamReader(skt.getInputStream()));
System.out.println("Received string: '");
line = networkBin.readLine(); // Read one line
while(true)
System.out.println(line); // Output the line
line = networkBin.readLine(); // Read the next line, if any
catch(Exception e) {
System.out.print("Whoops! It didn't work!\n");
e.printStackTrace();
}Now look here. I could not care less about this
code. I don't know anything about it, I don't
want to know, I have already recommended you don't
use it, and I have also given you a simpler and
better solution. If you don't want to take my advice
that is your privilege and your problem.ya i has understand system propertis i have setted and u can see it in the code i have tried by both system properties and also J2SE 5.0 proxy class but i got a same problem malformed Exception server refuse to connection.
is there any problem at sever side?
can u tell me in which way u r teling to set the propery i m looking forward for ur reply.
ya i m sure u will give me.................reply "ejp".
Thnx in advance. -
How to wrap text in two columns and display as one in WAD
Hi ,
I have the following columns in my ODS , they are not KF's
c1 c2 c3
100 AA BB
200 CC DD
I need this display format
100 AA
BB
200 CC
DD
I need to wrap the text in columns c2 and c3 and display them under one column.
Is it possible in webtemplate by using java scripting.IN the Query , you could diplay Characteristics as a Hierarchy. Just above the Columns Box in Bex, do a write click.
Hope this helps -
Highlighting Text In Pages 4 and 5: How To/Best Methods?
Hello Fellow Macers:
I need advice on the best way to highlight text in Pages 4 and 5:
I use and prefer Pages 4.3. Yes, I have Pages 5.2, and I find that using it good for some things (dictating into a document), but not so good for others - highlighting text.
For example, I read tons of documents and like to make notes, comments and especially highlight text according to a color-code scheme that I have used for years.
For those who use Word, this process of highlighting text is pretty straight-forward:
You highlight your text and then simply click your highlight box on the Word toolbar (choose a default color, usually yellow) and you're done. If you need to use another color, just use the pull-down, as seen above. The drawback in Word - no Orange, or sectrum option.
But let's face it - Word as a program is just too much. As someone who has used every word processing program under the sun, I find Pages excellent. It does what I need.
However, I find highlighting text in Pages clumsy. Here's what I need to do to highlight text in Pages 4.3:
Go to your toolbar, and then choose a highlight/background color. It's more labor intensive then Word, above, but you do have the option of more colors.
Then there's this method, where basically you get to simply use yellow as your color:
IMHO both are clumsy methods compared to Word, but have become even more so in Pages 5.2....
Lots of clicks to achieve simple color highlights.
Am I missing something, or is there a simpler way, in either Pages 4 or Pages 5, to achieve the above results???
Any suggestions appreciated!Dear VikingOSX:
As Ed MacMahon once said (before your time?) re Pages 5 Character Fill Color: "You are correct, sir!!"
The gear icon IS where the function that I'm talking about is located. Still, it's annoying.
Q: Why?
A: Because from a work-flow perspective as someone who is highlighting it makes no sense. We in the Western world read and write from top to bottom, left to right. Making a mark on a doc should follow the same flow.
You should not have to keep looking over to the right side of the doc to find your function. Logically it should be at the top (e.g., toolbar), on the left, or perhaps some contextual pop-up option.
Furthermore, it's more "labor intensive" from this point of view: In Word, once you set the color (which, granted, you may need to change from time to time IF you, like me, use multiple colors as part of your highlighting workflow), you just click the box after highlighting the text - 1 click vs 2, and possibly 3.
The "richer color" part of my comment was just to note that a flaw, in my view, of Word's basic scheme is that:
1) It lacks an Orange. And we've all used an Orange highlighter at somepoint, right? Or perhaps, you were like me in High School and threw them instead. But you get the point...and
2) Having a wider pallatte available as an option - which you do in Apple's scheme - is nice. I use color coding/highlighting to make notes and save time. The colors tell me what's important, what's next important, key terms, etc. Also, for example, if I wanted to outline my highlighting notes, the color scheme (which has a heirarchy based on color, right?) allows me to do this quickly because it's already there.
As for the Dictation function working on Pages '09/4.3 - again, you are correct, sir! And that's great to know. I had tried to use it before when the new Pages 5 (hitting fn twice on Pages 4.3) but it didn't activate. I tried it after reading your response and Bingo! It's Alive! So thanks for that tip.
Your keyboard shortcut scheme is an interesting idea, and I may try it as an experiment. My intuition is that it will not work as straight-forwardly as Word's toolbar pull-down will, but I might be wrong. We'll see.
And yes, I do use Pages '09 (4.3) instead of Pages 5 for exactly this reason (see my discussion)
Great reply! Thanks! -
OVS Help in Select Options-Text to be Shown and Code to be captured
Hello Experts,
I am using Select options in web dynpro abap.
On a particular View container i have added a selection field using ADD_SELECTION_FIELD which has an OVS help to it.
The selection field is of type CODE.
And on click of a button i am reading the select option fields using GET_RANGE_TABLE_OF_SEL_FIELD and assigining this to a
field symbol which inturn is being set to an attribute.
My requirement is to show the TEXT to the user and send the CODE to the method which is called
when the button is clicked and a table is populated.
Normally we can keep two attributes one for TEXT and the other for CODE but for Select options i am not very sure how this can be achieved.
Because in select options we are reading the values present on the select option field and there may be multiple values.
Please guide me through this.
Thanks in Advance,
ShravanHello Shravan,
This can be easily achieved if you convert the selection field to dropdown.
Create a valueset containing the list of valid values and then pass this to the ADD_SELECTION_FIELD method
"Creating valueset
DATA lt_valueset TYPE wdy_key_value_table.
DATA ls_valueset LIKE LINE OF lt_valueset.
ls_valueset-key = 'EN'.
ls_valueset-value = 'English'.
APPEND ls_valueset TO lt_valueset.
"Creating selection field as Dropdown
lr_helper->add_selection_field( i_id = <ID>
it_result = lt_range
i_as_dropdown = abap_true
it_value_set = lt_valueset ).
BR, Saravanan -
Adobe Acrobat Pro text box not printing and is hidden under box highlight.
Adobe Acrobat Pro 10.1.13. I am completing a form with text box throughout the document. I can no get the text box to printing and the text is hidden under box highlight. I have tried printing with the print feature 'Comments & Forms/ Document and Markups' with no luck.
It's doing that because you have field highlighting enabled. YOu can either turn it off or make the field read-only (if it's only used for display and not entry).
-
Text input into WebTemplate and sending it to an ODS - urgent
SDNers,
I have a unique requirement. I need to take in text input on screen and then send back the same into an ODS in BW.
Something like :
Project Overrun | Text Area
20% | <Project Manager's comments>
I need to pass this on to atleast an ABAp FUnction modue so that I can do the further processing.
Heike I did see some posts by you on using the help service - could you walk me through as to how to do it. and also how to modify the onclick event.
If you can direct me to any how to paper / site also it would be useful.
Arun VaradarajanHi Arun,
in this scenario I wouldn't use the help service. The help service is more suited if you need to interact with your web application later on (meaning the state of the web items or data provider changes) or you need the state of a Data Provider or web item in your application. In your case it's just write something to an ODS. Why not just include a form in your Web Template. When submitting a form just call a BSP in a new window. In the BSP read the transfered parameters and do whatever you like.
Heike -
I am unable to delete whole texts from left-swipe. i click delete and they dissappear. But then i can't send or recieve texts. i reboot phone and deleted message reappear, but i am able to continue send/recieving texts.. i've synced, backup, everything. Help! I am doing this beacuse in my space on my phone my doucments and data are taking up 9GB of space, and i don't know why other than in my phone it says messages are taking up 8GB or so. I am running ios 7.0. I have synced my phone with itunes, backed up, reboots after deleting the texts, they never vanish, i have even restored from itunes and restored from a backup that didn't include the texts after i deleted them.
actually better to reset your phone and reinstall the latest firmware again after that restore your back up it should be ok
-
I just bought an new ipad mini with wifi and cellular. Is there any way to send text messages to people and contacts that do not have iphones such as friends with blackberrys or a samsung galaxy smartphone from this ipad. Everytime I try to send a message to a person that does not have an Apple product ( Iphone or Ipad ) it comes up saying contact is not registered for iMessage and wont send it. I can only send them a message from my iPhone 4 instead. Do I have to install a new App from the App store to send these non iMessage cell users a message?
FYI
Complete guide to using iOS 6
http://howto.cnet.com/ios-6-complete-guide/
Guide to Built-In Apps on iOS
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
http://www.youtube.com/watch?v=YT2bD0-OqBM
http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
Cheers, Tom -
Calendar on iOS 7. Anyone noticed that when you enter text into the "notes section" of a day, the text disappears behind the keyboard rather than scrolling down to keep pace with text entry ? Looks like an 7 glitch to me ?
Doesn't do that for me. Try resetting the phone
-
A very good friend of mine dropped her iphone into water and now it is not working.Her husband recently passed away and text messages from him and from well wishers after his decease are feared lost. Is there any way to retrieve them?
I suggested contacting Compub in Nassau St as the info is priceless and worth the trouble of trying to regain?
Any thoughts? The poor lady is very distressIf she has backed up her iPhone she can replace that iPhone and set up the new iPhone from her backup.
You can put the iPhone that went into water into a plastic baggie with either new silica gel packets (preferred) or raw rice and let it sit for 4 - 5 days. After that time remove the phone and connect it to power for at least a half hour. While it is still connected to power reset it by holding down the power and hold button, wait for the Apple logo then let go of the buttons. Might take several tries. If it revives immediately back it up. -
Preview's PDF text select ignores columns and misses word spaces
I have a number of scanned pdf newspaper articles that I was attempting to copy the text from. Preview appears to register the existence of columns, as there is a pale blue background between the columns.
However when I use the text select tool, it completely ignores the column - and just selects across all columns. And when I paste the text into my text editor, it's missing all the spaces between the words, and the font size is always huge.
Conversely, Adobe reader in XP has no problem selecting by column, and the pasted text is also an exact replication of the original content. I don't know why Preview performs so badly in this regard? Anyone else experience any issues with pdf text select?Anyone else experience any issues with pdf text select?
Yes, and not just recently.
There is a reason Preview is named, well, preview. It is not an authoring environment and PDFs are not meant to serve in that context either...unless maybe you understand all of inherent the font traps, tricks & tips and how to tune your scanning/OCR software to keep rework to a minimum.
Scanning PDFs is always tricky, and without the occasional heavy metal to bring to the task, it just seems to be that more problematic.
Keep trying, but I'd really suggest to look to other tools at this time. -
Text appearing as Bold and Italic in CS4
Hi Guys
Whenever I create a new document and type into it the text is automatically 'bold' and 'italics', I have saved the page and opened on another computer running CS4 and the text is fine (not bold or italic). I have created a page on another computer and opened it on the troublesome one and again it is bold and italic ((
I cannot see anything in the preferences that may cause it, I have also discarded the configuration folder which contains the preferences for the program - no good either (( So as a last resort I have re-installed Dreamweaver and it is still playing up. I guess I can re-installs the complete CS4 suite but rather not as it is going to take a while and also may not fix the problem.
Any ideas anybody??I have just copied the code from the page as below and as you can see there is no bold or italic applied:-
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
</head>
<body>
hello
</body>
</html>
Maybe you are looking for
-
my macbook pro (10.6.8) refused to install wireless printer (canon pixma MG4260). Whenever i tried to install, it keeps saying 'internal error number 12'. Please help me!! and what does internal error got to do with installing a printer?
-
Do we need to recompile entire code base ?
Do we need to recompile the entire code base to utilize the efficiency of a Sun SPARC Enterprise T5220 Server. We will not be able to perform any of the optimization on the code, as it affects the working nature of the product. So I'm not able to uti
-
Plant Maintenance : Settlement Rule
Hi, We have 2 Maintenance Order type PM02 and PM09. PM02 --> Standard Maintenance Order For this, during the creation settlement profile (during release) the cost center is picked up from the equipment master data. For PM09 --> We don'
-
When i try to install itunes it says itunes was interrupted during install and i have nothing that is interrupting it, all programs are closed someone please help? -It starts to install and as soon as it begins it stops
-
CPU over-commit in VMware cluster environment
I have read the note 1056052. The #5 guideline points out that SAP system should not use memory over-commit setting for virtual machines built on Windows with SQL server platform. My question is if this recommendation applys to CPU as well. Is it com