Text master data

HI experts
          I have an MAster data target object it has text aslo, daily new recordsa are are laoded , but text desciption is not laoding , ibut for the first time it was loaded , i cheked the the trasforamtions , every thing is right ? what could be the Problem ?

Hi Ramesh,
I hope you have a DS> then you have created the transformation between the DS & your master data IO>
Is there any key value coming for the text values??
for Ex say your field is ABC: 101 is the key values & Company XYZ is the associated text with that.
If so make sure that you have mapped the DS field ABC with the corresponding Masterdata IO
Also the field which is getting the text values in DS with all the 3 text desciptions i.e 0TXTSH(short description), 0TXTMD(medium description), 0TXTLD(long description) so all the descriptions will be loaded into BW.
Hope it helps!
Regards,
Pavan

Similar Messages

  • How are attribute and text master data tables linked in SAP R/3?

    Hello,
    how are attribute and text master data tables linked in SAP R/3?
    Most tables with attribute master data like T001 for company codes,
    have a text master data table T001T (add "T" to table name).
    When looking at the content of table T001 via transaction se11,
    the text are automatically joined.
    But for some tables there is no "T"-table (e.g. table TVBUR for sales offices
    has no text table TVBURT), but in se11 you get texts. There is an address
    link in TVBUR, but the Name1, etc. are empty.
    a) Where are the text stored?
    b) How does the system know of the link?
    Hope someone can help!
    Best regards
    Thomas

    Hi Thomas
    The master and text table are not linked by name, of course, if you see the text table, it has the same key fields of master table, only it has the field key spras and the field for description.
    The link beetween the tables is done by foreign key: if you check the text table TVKBT u need to see how the foreign key for field VKBUR is done:
    -> Foreing key with table TVBUR
    -> Foreing key field type -> KEY FIELD FOR A TEXT TABLE
    ->Cardinality-> 1-:CN
    It's very important the attribute sets for Foreing key field type, if it's KEY FIELD FOR A TEXT TABLE, it'll mean the table is a text table: i.e. that mean the master table is a check table for the text table, where the foreign key type is for text table.
    U can find out the text table of master table by SE11: GoTo->Text Table
    U can fined some information in table DD08L.
    Max

  • Problem in loading the Text master data

    Hi,
    I have installed one datasource for Text from business content.
    On checking the records in RSA3, it has 124 recs.
    But while loading data in BW its fetching only 66 recs.
    This is the problem with the language key.
    Its not loading the data for "EL" . Its only loading for EN
    Any idea how to load all the text master data.
    Thanks,
    Jeetu

    I checked in table, EL is maintained(greek language) , But then why extractor is not fetching data for this language ? Its populating fine for EN
    I checked Info package there is no selection/restriction there
    Any guess how to load for EL?
    Thanks,
    Jeetu

  • Report problem when show attribute only Characteristic text master data

    I want to show the attribute only Characteristic in report. In report, it shows "Not assigned" for the Char row, but other data show properly. I checked the Char text master data. It looks fine. I don't what's problem?

    hi robert,
    some of your characteristics probably don't have the attribute assigned (meaning they have a blank value for that attribute). i don't know if this is configurable, but blank entries all display as '#' and the text 'Not Assigned'.
    (as an additional comment, if you take a look at the masterdata of the attribute you used (which i presume exists), there should be a blank entry there.)
    for example, in the case of the deletion flag of an article, not all articles are flagged for deletion. if you create a report that displays the article number and the deletion flag attribute, you'll see quite a bunch of 'not assigned'/'X' in your output.
    let me know if that helps.
    ryan.

  • Error in uploading TEXT master data

    I got the following error while Creating Infopackage for uploading TEXT Master data:
    Error 8 when compiling the upload program:row 431, message: A newer version of data type
    /BIC/B0000102000 was
    Can anyone let me know how to solve this issue?
    Thanks,
    Soujanya.

    Hi Soujanya,
    Check whether the row 431 is having proper data that i matching in Data type with the IO.
    Also activate the transfer rule/ Transformations if any. Then try loading the data.
    If you are trying to load the Data through the Flat File, close the *.CSV file before actually loading the data & dont open it till it is successfully loaded.
    Hope it helps!
    Regards,
    Pavan

  • Load customer text master data error

    Hi Experts:
    When load customer text master data ,system show the following error message ,could you please
    help me to solve the problem , thanks a lot
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.

    Delete PSA request from Datasource -> manage
    Do a fresh load and Goto to infopackage monitor
    Environment --> Short Dump --> in Source System...... Click 'TODAY'
    Next screen would show u all Runtime Error... Double click on the first one
    from the next screen, u can do analysis by double clicking 'What Happend ?', What can u do? Error Analysis..
    By doing this U can find out what exactly is the problem

  • How can I upload text master data for attribute-only Charactertic?

    I can't create infosource for attribute-only Charactertic via direct update from Infoobject, because attribute-only Charactertics you can't choose from available infoobject.
    How can I upload text master data for attribute-only Charactertic?
    Thanks!

    Hi roberto,
    I soloved the problem. I can input the attribute-only char directly in the text box instead of choosing from list of infoobjects, but I still can't find the char in infoobject selection dialog even using search.

  • Not able to load text master data for customer infoobject

    Hi Guys,
    I am not able  load master data text to the customer infoobject.
    I have a infoobject-A which is loaded with 1000 records, out of which only 100 records are with text and remaining are without text.
    I have run a repair full request(extraction from ECC) and
    i can see data till PSA(the 100 records which are with text are no more available in ECC now).remaining 900 records are available with text till PSA but not updating to target infoobject.
    I have 3.X flow and i have checked transfer rules update rules and tried everythign from side-but no use-still not not working.
    Please post your suggestions.
    Thanks in advance
    Regards,
    Siva

    Hi Ramanjaneyulu,
    Transferrules screen shot:-
    update rules
    Regards,
    Siva

  • Delete SID & Text/Master Data in Production

    Hi,
         I need to delete the SID (/BI0/SREGION) , Text/Master (/BI0/TREGION) data directly in production. Could anyone assist me..?
    Thanks in advance.

    Hi,
    use program RSDMD_DEL_BACKGROUND (SE38)
    enter the following paramters in the selection screen and schedule it in the background.
    P_IOBJNM                          0REGION               
    P_CHABNM                          0REGION               
    P_DELSID (checked if you want to delete SIDs)
    P_DELTXT (checked if you want to delete texts)                                               
    P_OBJ                             RSDMD                
    P_SUB                             MD_DEL               
    P_EXT                             0REGION               
    P_NOPROT (unchecked) 
    This program will delete all values (MDIDs, SIDs, TEXTs) not used (no posted in any other BW object).
    You can analyze the correponding log (in particular why a certain ID wasn't used and where used) with transaction SLG1 (RSDMD, MD_DEL. 0REGION as entered above).
    The program could run a while since it will scan all the objects using 0REGION.
    hope this helps...
    Olivier.

  • Problem loading text master data for one value

    Hi guru's,
    We are trying to load texts for an standard characteristic (data element : Char 30). The problem comes with characteristic value 4700112703/04/19 , all other values load correct but this one is recognized by SAP as an incorrect value. It seems, by the PSA explanation, that the / is incorrect.
    Do you know why this value is incorrect ? Is there any way to load this record to the characteristic ?
    Thanks in advance.

    Hi,
    In RSKC specify the value as ALL_CAPITAL which would allow all the necessary and SAP supported values(including /) to come into BW.
    Refer this blog for more information
    /people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
    Regards,
    Rik

  • Info object as Data type as NUMC, master data doesnot store value as 0

    Hello All,
    I have an Info Object whose data type is NUMC.
    It has only text Master Data.
    Id and its description are the two fields of that Master data.
    Now when below data is feeded in to that infoobject through transformation which has 1 to 1 mapping.
    ID              Description
    0                Submiited
    1                 Approved
    2                  cancelled
    The data gets uploaded in text table but.
    0 ID values turns out to be "       "    blank.
    Which is wrong.
    Result in Text Master table:
    ID                Description
                        Submitted
    1                  Approved
    2                 Cancelled
    if the ID is 0 it should be populated as 0 for "submitted"
    No start routine our end routine is ther in the transformation.
    Kinldy help me to solve this issue.
    Points will be assigned

    Hi,
    When an InfoObject is created it'll have a blank record, in case of Numc it'll be as shown below:
    ID  Description
    0   Blank
    But this 0 gets displayed as blank as well.
    When you post transaction/master data you can post it as
    0 for Submitted
    1 for...
    2 for...
    When you do reporting on this & if you only select text display only it'll display "Submitted", which is required. But if you display ID & text or only ID. It'll display # instead of 0.
    See if you can replace this # with 0.
    Mean while i'll be trying to get this solution. I'll post soon if i get the solution.
    Regards,
    Iliyas

  • 0CURRENCY Infoobject Business Explorer & Master data setting

    Hi Gurus,
    Im having a hard time to find properties/setting Business Explorer & Master data tab for 0CURRENCY infoobject.
    Is there any chance that I can edit the BEx setting of this infoobject e.g Query Execution Filter Val. Selectn field?
    And
    Is there any method that I can flag the text are time-dep. box for master data?
    Any assistant really appreciated.
    Thanks in advance.

    Hi
    If I got your question properly, 0CURRENCY is a Currency Key field it does not have any Text / Master Data for it. 
    Try to see the 0currecy at RSA1-- You will find the settings for BEx -- at General Tab / Hierarchies Tab only.
    Hope it helps

  • How the master data of multi language is shared in the info cubes

    hi frindz,
    how the master data of multi language is shared in the info cubes
                                                                     bye bye
                                                                      venkata ramana reddy.G

    Hi Ventak,
    In the infocube you have the key. Then you have a text master data table that has as key (for the table) the key of the value (the one in the cube) and the language, and the text in that language as another field (short, med, long).
    Hope this helps.
    Regards,
    Diego

  • Master data for "Purchasing Document category" 0DOC_CAT

    Hello All,
    I have a requirement to display the purchasing document category "0DOC_CAT" and its description in a report. The problem I am facing right now is:
    How to get the Description or TEXT of the Purchasing document category ?
    Is there any standard text master data datasource available ?
    Is there any ECC tables which has this information ( both key and text).... as I searched through number of tables like T161T etc... but it only has the Key information (BSTYP)
    Please let me know your ideas ....... Really appreciate your time........

    Hi Ram,
    In the source system, this feild is used along with document type and hence into BI we can use the table mentioned by you, that T161T only can be used to load text of document type along with document categ as compunded object.
    For your info....you may be able to see some text for document categ (BSTYP) in ECC, thats because in the definition of this feild, the text is hard coded. If you would like then the same can be done in BI as well, by manually maintaining the text in the info object, in stead of loading.
    In ECC the hard coded values are stored in Data dictionary tables, in this case in DD07D table, but this cant be used for data source.
    Naveen.A

  • Master Data Text Used as Line Items in ODS

    Hi Experts! </br></br>
    I would just like to know if I can use the text I loaded of master data Revenue Type from R/3 in BW? </br></br>
    What I have done already is that I have created a customized extractor in R/3 under the CO-PA-IO node in RSA6 (since I think this is where this data is coming from/should belong under. A consultant of ours (before I got here) have already set up the other individual extractors for Sub Product A & B, Product Line, others in the FS10N transaction, document line item details.</br>Hi Experts! </br></br>
    I would just like to know if I can use the text I loaded of master data Revenue Type from R/3 in BW? </br></br>
    What I have done already is that I have created a customized extractor in R/3 under the CO-PA-IO node in RSA6 (since I think this is where this data is coming from/should belong under. A consultant of ours (before I got here) have already set up the other individual extractors for Sub Product A & B, Product Line, others in the FS10N transaction, document line item details.</br></br>
    Once I have created it, I  already replicated it in BW and have already setup the infosource. I created a InfoObject as Master Data with text and I loaded data from infosource. After loading, when I maintain Master Data for the characteristic I created in BW, I can see the pulled data that I have loaded from R/3. It is correct. </br></br>
    Now this is where I am having a problem. I need to know how to be able to use this Master Data text when I load line items (0EC_PCA_3) to my PCA ODS. As it is right now, I have setup the EC_PCA datasource, replicated it and activated it as well, and I have already added a Revenue Type characteristic to this datasource already and have mapped it accordingly. However, I am unable to pull any data when i manage the contents of the ODS, but i can see the it in the maintain master data. </br></br>
    How can i set it up such that I am also able to match my line items with their corresponding Rev Type Text in the ODS results? It is important to note that for Sub Product A, B, and Product Line fields, the previous setup is able to do so, and I am able to see results for these in the ODS line items results. These are also setup as master data text in BW by our previous consultant and I followed the same procedure and setup. </br></br>
    I feel that I am just missing a step on how to tell BW that the master data text should also be matched to the Line Items in the ODS during loading.</br></br>
    Kindly seeking for your assistance and advance thanks!
    Once I have created it, I  already replicated it in BW and have already setup the infosource. I created a InfoObject as Master Data with text and I loaded data from infosource. After loading, when I maintain Master Data for the characteristic I created in BW, I can see the pulled data that I have loaded from R/3. It is correct. </br></br>
    Now this is where I am having a problem. I need to know how to be able to use this Master Data text when I load line items (0EC_PCA_3) to my PCA ODS. As it is right now, I have setup the EC_PCA datasource, replicated it and activated it as well, and I have already added a Revenue Type characteristic to this datasource already and have mapped it accordingly. However, I am unable to pull any data when i manage the contents of the ODS, but i can see the it in the maintain master data. </br></br>
    How can i set it up such that I am also able to match my line items with their corresponding Rev Type Text in the ODS results? It is important to note that for Sub Product A, B, and Product Line fields, the previous setup is able to do so, and I am able to see results for these in the ODS line items results. These are also setup as master data text in BW by our previous consultant and I followed the same procedure and setup. </br></br>
    I feel that I am just missing a step on how to tell BW that the master data text should also be matched to the Line Items in the ODS during loading.</br></br>
    Kindly seeking for your assistance and advance thanks!

    Hi Simon, </br></br>
    Thanks for the reply! </br></br>
    First of all, yes, I think we are on the same page regarding what I want to do... I have created a master data infoObject in BW, created a customized extractor in R/3 under CO-PA-IO node, and mapped them to each other in BW such that when i execute a package in InfoSource in BW, i am able to load master data text in InfoObject Rev Type in BW. </br></br>
    Kindly explain more on "you should have created the revenue type as a text datasource and loaded the data into the text and not the master data". Do you mean to say that I should have just created a regular datasource (i.e. Flexible Update in any Data Target InfoSource), rather than a direct update of Master Data datasource? </br></br>
    However, if this is what you meant, please remember that for other characteristics such as Sub Product A, B, Product Lines, Sales Region, Business Center etc. (as seen in FS10N tcode per GL), are reflected in ODS per line item, and they are setup as master data. So I was thinking maybe i just missed a step in mapping. </br></br>
    Is this what you meant? My main goal is to be able to have the line items i load in ODS be matched to the particular revenue type for that GL's profit center (seen in FS10N tcode in R/3)</br></br>
    Thanks again.

Maybe you are looking for