Text message to email sent as attachment instead of in email body
I used to have this problem before with my iPhone 4, but it seemed to go away. Now, with the lates OS update it's back again. When I send a text message to my wife's Gmail it arrives as a text file attachment to the email instead of just normal text in the email body.
I use Verizon, and the source of the email is @vzwpix.com. I know that there is also @vtext.com, but in the past it hasn't mattered which one was used.
Any ideas?
If you try reading other posts here about attachments and such you may get a hint. It sounds like all email programs would work fine if people just sent plain text. Problems arise when we use RTF (rich text format) and HTML. Possibly the original email you received had formatted text. My guess is that if you forced that text into plain text then it would be readable by all. This is the reason that only some people have trouble with the forwarded text. It depends on their email client or even on settings of that client.
Good luck.
Similar Messages
-
My text messages are being sent and received with my email address instead of my phone number. How do I fix this?
This is with iMessages only.
Go to Settings > Messages > Send & Receive and below the Start New Conversations From, select your cell phone number instead of your Apple ID email address. -
Text message is showing sent from my email address instead of phone number
I just reset all my settings on my Iphone 4s and now when I send text messages my friends say it is coming from my email address not my phone number. Why is that? Any advice on how to get it back to normal (from my number not email?)
Thanks in advance!!!I assume your phone is using your phone number. Select an E-Mail also. Under the Select Area a new Area should show up offering to choose whether to use the number or the E-Mail to start new conversations. Pick the Phone number. Go to iMessage and start new conversations.
-
JJust wondering why an email or text message cannot be sent to prepaid customers to let them know another card is needed in order to keep their service? Other carriers do this
Perhaps you can sign into your MyVerizon account online and see if the options are available, but not turned on.
-
I have just upgraded to the iphone 5 and now when I send a text message it says its from astrogirl36@*** instead of my name, that is my name for icloud how do I change this
<Email Edited By Host>You are only as young as you feel......
This is an example of how you can select the exact content that you want to sync to your device. You do not have to sync the entire iTunes library. You can pick and choose the music, apps, books and so on that you want to sync. This is using music as an example.
Connect the iPad to the PC and launch iTunes.
Click on the iPad name on the left side under devices.
Click on the Music Tab on the right.
Click on only the albums or playlists that you want to sync.
Click on the Sync Music Heading.
Click on Apply in the lower right corner of iTunes
You can do this with apps, books, movies .... Whatever .... You have the freedom to sync whatever you want. -
I got a text message which had a link attached to it, i did click on the link, basically some job scam but on the link. Now i just want to find out if my phone has been compromised in anyway and what are the tell tell signs.
your phone has not been compromised. There have been no viruses, worms or trojan horses ever reported.
-
Text messages come up as phone numbers instead of names - even though they're in my contacts.
i updated my 4S from iOS 5 to iOS 5.0.1 and all of my contacts transferred, but now all of my text messages come up as phone numbers instead of names - even though they're in my contacts.
Hi,
I take it these are iMessages contacts ?
Are you using iCloud to Sync your Contacts apps info ?
In Messages > Preferences > Accounts > Details Button (You will need to sign in again) do you have the correct Country/Region set ?
This can effect the adding of the correct Country Code prefix to your own number and distort the coming form the Contacts app if the number there don't include a Country Code.
9:12 pm Wednesday; July 2, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
I have a LG Lucid 2
I did not create that message. It says it was from my sister in law but my
phone chose from my contacts randomly who to send it to. I live in 17350
[image: Verizon Wireless
Community]<http://community.verizonwireless.com>
<http://www.verizonwireless.com/b2c/index.html>
<http://www.verizonwireless.com/b2c/explore>
<http://www.verizonwireless.com/b2c/store/controller?item=phoneFirst&action=viewShopIndex>
<https://wbillpay.verizonwireless.com/vzw/nos/topline.jsp>
<http://support.verizonwireless.com/clc/> My
phone took a text message that was sent to me and forwarded it to 16 random
contacts from my phone. ????????? created by Verizon Wireless Customer
Support <https://community.verizonwireless.com/people/vzw_customer_support>in
*LG
G2* - View the full
discussion<https://community.verizonwireless.com/message/1086444#1086444> -
I just updated my phone to iOS7 and me and my mom have the same apple ID, so now for some reason I get all the text messages that are sent to her iPhone on mine..? Help please!!
Stop sharing an Apple ID. That is the cause.
Settings > Messages > Send & Receive > You can be reached for messages at... -
i have an issue when loading a workflow. it gives me a following error "The email message cannot be sent. Make sure the outgoing email settings for the server are configured properly". it doesnt send me any alerts and worlflow fails at the end
with the above error message.Hi,
I agree with Bistesh. But after Outgoing e-mail settings are configured properly, if the issue still exists,
It may result from your Anti-Virus. Please refer to the following steps:
Open MCAfee Console and go to Access Protection window.
Click Anti-Virus Standard Protection and edit “prevent mass mailing
worms from sending emails” rule.
Now we need to know which processes are being blocked therefore we need to check the MCAfee Log located at
C:\Documents and Settings\All Users\Application Data\McAfee\DesktopProtection\AccessProtectionLog.txt
you may find entries of DtExec , DtExecUI and DatabaseMail90, now these processes need to be entered in the exclusion list of selected rule .
Reset the IIS And SharePoint Timer service to check if this works for you.
Here are some similar issues with you, you can use as a reference:
http://social.technet.microsoft.com/Forums/en-US/667f0d61-4914-43fa-80c1-8cf430b113bb/workflow-email-not-working-but-normal-email-alerts-working-fine?forum=sharepointgeneralprevious
http://techsuite.wordpress.com/2008/12/08/workflow-history-the-email-message-cannot-be-sent-make-sure-the-outgoing-email-settings-for-the-server-are-configured-properly/
Best Regards,
Lisa chen -
How come when I look at my text messages, my contacts' phone numbers appear instead of their contact names?
If you're with Verizon, here's what I found on the boards:
Dial *228, press 1 when the nice lady answers and wait until she tells you your phone has been successfully programmed.
Then hang up, and press the home key twice rapidly and delete the open/running apps that appear there - delete from that second screen, NOT from the Dock at the bottom of your home screen! You don't want to delete the programs, you just want to close the open/running apps.
Wait 5 minutes or so, then voila! Mine was fixed! -
will a text message that was sent to my iphone that appeared on a linked ipod be deleted on the ipod if i delete it from the iphone?
No. I just tried it.
-
How to send an email with an attachment to the customers email address.
Hi friends,
How to send an email with an attachment to the customers email address.
the attachment will be in doc format.
Having an Header
the data which i am sending must be in a TABLE format
with 5 columns.
and each column must have a column heading
Please guide me.
Thanks in Advance,
Ganesh.*& Report ZEMAIL_ATTACH *
*& Example of sending external email via SAPCONNECT *
REPORT ZEMAIL_ATTACH .
TABLES: ekko.
PARAMETERS: p_email TYPE somlreci1-receiver .
*Here get the values of mail from the table adn6 for the customer address.
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
wa_ekpo TYPE t_ekpo.
TYPES: BEGIN OF t_charekpo,
ebeln(10) TYPE c,
ebelp(5) TYPE c,
aedat(8) TYPE c,
matnr(18) TYPE c,
END OF t_charekpo.
DATA: wa_charekpo TYPE t_charekpo.
DATA: it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
w_cnt TYPE i,
w_sent_all(1) TYPE c,
w_doc_data LIKE sodocchgi1,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
*START_OF_SELECTION
START-OF-SELECTION.
Retrieve sample data from table ekpo
PERFORM data_retrieval.
Populate table with detaisl to be entered into .xls file
PERFORM build_xls_data_table.
*END-OF-SELECTION
END-OF-SELECTION.
Populate message body text
perform populate_email_message_body.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_message
it_attach
using p_email
'Example .xls documnet attachment'
'DOC'
'filename'
changing gd_error
gd_reciever.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM initiate_mail_execute_program.
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT ebeln ebelp aedat matnr
UP TO 10 ROWS
FROM ekpo
INTO TABLE it_ekpo.
ENDFORM. " DATA_RETRIEVAL
*& Form BUILD_XLS_DATA_TABLE
Build data table for .xls document
FORM build_xls_data_table.
CONSTANTS: con_cret TYPE x VALUE '0D', "OK for non Unicode
con_tab TYPE x VALUE '09'. "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
*constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
LOOP AT it_ekpo INTO wa_charekpo.
CONCATENATE wa_charekpo-ebeln wa_charekpo-ebelp
wa_charekpo-aedat wa_charekpo-matnr
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
ENDLOOP.
ENDFORM. " BUILD_XLS_DATA_TABLE
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
Populate message body text
form populate_email_message_body.
REFRESH it_message.
it_message = 'Please find attached a list test ekpo records'.
APPEND it_message.
endform. " POPULATE_EMAIL_MESSAGE_BODY
regards,
venkat. -
Email sent
Check your inbox for an email with instructions on how to reset your security information
but i haven't get anything in my emailI never got mine either. I ended up scheduling for them to call me to reset my security questions.
-
I need help resetting my security questions, i try to and it says email sent but i never get the email to my main email or alternate email, i never set my questions but somehow there set, so i can also not buy apps without entering my question awnsers please help
Forgotten Security Questions/Answers
You need to contact Apple by:
1 - Use the Express lane and start here:
https://expresslane.apple.com
then click More Products and Services>Apple ID>Other Apple ID Topics>Forgotten Apple ID security questions.
or
Apple - Support -form iTunes Store - Contact Us
2 - Call Apple in your country by getting the number from here:
http://support.apple.com/kb/HE57
or
Apple ID: Contacting Apple for help with Apple ID account security
3 - Use your rescue email address if you set one up
Rescue email address and how to reset Apple ID security questions
For general information see:
Apple ID: All about Apple ID security questions
Maybe you are looking for
-
In BPM - How to populate the recievers
Hi All, I need to create two files from my BPM. Basically I am using a fork (without any condition) and it should create me two files in anycase. Mapping1 -> receiver detremination1 -> send1 Fork---> { Mappin
-
How can I get a ref to a ring in a cluster that are in a array of clusters?
I have a cluster (typdef'd) with controls. Two of the controls is rings. I place that cluster in a array. I then fill the array of clusters up with data. Can I get the ref to the rings in each cluster? I must load them, individually, with strings[].
-
How to restart the web-to-go server?
When we are trying to show the reports in mobile client it is throwing this error. Actually, we are using JSP files for reports. When i start the web-to-go server, it is giving like this: c:\mobileclient\webtogo>WEBTOGO -D0 log1:Mount point jdbc:poli
-
When outputting film to the rip or laser printer the crop marks and register marks will not print. Even if you add gutter to the job and create your own marks and color them with register black. They also will not output. Using CS6 and CC versions.
-
I have baught a Nokia e65. Could anyone tell me, please, is a cable dku-5 compatible with my telephone?