Text messages being sent in MIME format?

i currently receive work pages as text messages on my iphone 3gs. our system generates these pages as emails to [phone number]@mms.att.net. the person supporting this system reports that when i accept ownership for a given page (this is an on-call rotation) the message format is MIME...it needs to be plain text. these issues began after my upgrade to the latest iOS - 4.2.1.
any ideas?

When you go to Messages > New message a list of all possible contacts from the same person appears, in blue when supporting iMessages, green for texts and grey to non available phones/mails.
Make sure you select the correct one when creating a new message.

Similar Messages

  • Why are my text messages being sent through my Apple ID to only one person and through my phone number to all other contact when using iMessage?

    Why are my text messages being sent through my Apple ID to only one person and through my phone number to all other contact when using iMessage?

    Is this one person using an iphone or ipad for imessaging?

  • Why are my group text messages being sent as pictures

    My group text messages are being sent as pictures or images and I don't know why. It just started happening, I've sent them before without to the same people without this happening. I can sent text messages to each person individualy and they are delivered as text. Is there some setting I can change? 

    HI. I had the same thing the other day. I sent a link to 40 people and got charged for 40 picture messages. I phoned my network provider and they said it is an apple fault (iphone).
    If you send a group 'Text' to more than 6 people, the iphone somehow marks it as a MMS or picture message. I get free texts and was shocked to be charged, but they did look into my messages and could see it was not an image and refunded me.
    If they are right, its an apple problem. Can anyone shed sme light on this?

  • Why are my text messages being sent from my e-mail?

    Just recently  I reset the password to my apple ID and ever since it has been sending text messages through my e-mail. I will open my text messaging app but my friends are still telling my i am texting them through my email. I tried lookinng under my measaging settings and for my icloud it had my email selected and it would  not let me select my phone number.

    Hey Bgrossman,
    Thanks for the question. It sounds like you are signed into your Apple ID (email address) in your iMessage settings:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    To sign out of your Apple ID
    1. Go to Settings > FaceTime, tap your Apple ID, and select Sign Out.
    2. Go to Settings > Messages > Send & Receive, tap your Apple ID, and select Sign Out.
    Thanks,
    Matt M.

  • Text messages being sent as iMessages

    Hi folks, My wife and I have a strange problem with our iPhone 5's where our SMS messages occasionally get sent as iMessages and as a result we never get them on our phones.
    Background - We both have iPhone 5's, I have an iPad 3, she has an iPad 4. All software is the latest updates available. We live in a rural area so wifi is only really available at home and the occasional McDonald's, so the only time iMessage is of any real use is when we are at home and want to iMessage friends. This results in both the iPhone and the iPad informing us that we have an iMessage and quickly becomes annoying during an extended conversation so we have turned off iMessage on our phones and use it exclusively on our iPads.
    The problem- on a few occasions in the last 2 weeks we have replied to a SMS message sent by one of us and the SMS reply has been sent as an iMessage. As a result it was not received until we return home and view the iPad. Now I understand that iMessages are supposed to be sent as SMS if the recipient is not able to receive an iMessage but NOT the other way around. It makes even less sense when you consider we both have iMessage turned off on our phones.
    Once it occurs it can be ages before the system restores itself to work correctly as well. A few days ago I had returned home to discover the message my wife had sent and was puzzled as to how it happened. I turned off the iPads and checked that iMessage was still off on both our phones (it was). Yet all efforts to send me an SMS from her phone to my phone resulted in an iMessage, not an SMS, the SMS option was not available as it continually defaulted to iMessage. How is this possible?

    iMessage does not require WiFi. It requires a data connection. Between iOS devices, if you have iMessage turned on, iMessage is the default. Do you, perchance, have cellular data turned off on your phones? That's the only reason I can think of that you wouldn't get iMessages on your phone outside of a WiFi connection. And yes, both devices will notify you of messages if you have notifications turned on on both. And yes, if your contact is messaging you from an iOS device and your iPad is on at home and your cellular data is turned off on your phone, the iPad would get the message.

  • Duplicate text messages being sent

    When I send a text messgae form my iphone 4 it is also going to my wife's phone how can I stop this?

    When you go to Messages > New message a list of all possible contacts from the same person appears, in blue when supporting iMessages, green for texts and grey to non available phones/mails.
    Make sure you select the correct one when creating a new message.

  • My imessage is frozen from too many text messages being sent all at one like a spam?

    How do i get it to unfreeze?

    Do a reset, no data loss.  Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.

  • Are my group messages being sent as MMS instead of SMS?

    Hi there! I just have a quick question about text messaging on my iPhone. I read here (http://support.apple.com/kb/HT5760) that "some carries automatically convert group messages into MMS" and that "group messaging is sent either as an SMS or MMS"
    See, I am a new postpaid subscriber. And my plan only includes unlimited text messaging (SMS) and data use. I usually send out group messages to 50+ of my colleagues when I need to remind them about something or ask a question. Are these messages being sent as an MMS, or as regular text messages? I fear I may be getting charged hefty sums for texting.
    Thanks!

    Why don't you check with your carrier. They would be in a position to better answer that question than a group of users from all over the world.

  • Text messages being receive twice by some recipients

    Text messages being receive twice by some recipients:
    I have had a couple of contacts tell me they are receiving text messages I send from the Z10 twice.
    Not everyone thou. I've asked. I'm sending from Rogers to a Rogers user. They both have 9700's.
    Any ideas?

    Mac GigaBytes wrote:
    Anyway, I followed the steps you provided, and changed all of the settings including <-- Settings <-- FaceTime and Settings <-- Messages <-- Use your Apple ID for messages.
    Just to be clear, while you have to use an Apple ID for iMessage and FaceTime, you should not be using that e-mail address to receive at or send from since you're using your father's ID.  Later in your post it sounds like you de-selected e-mail addresses that were not yours, which is correct, but I wanted to make sure you understand that you should not be using this ID for a contact point since it is not yours.
    If your father is still getting your text messages from your friends, I suspect that either:
    (a) after making these changes you need to turn iMessage and FaceTime off for a brief period, then turn back on, or
    (b) your friends are replying to older messages that you sent from your father's Apple ID, or
    (c) your father's iPhone somehow has your e-mail entered as one of the possible contact points for his iPhone.
    If the cause is (a) turn iMessage and FaceTime back on since you've already turned them off.
    If the cause is (b) see the last paragraph of my 1st post.  Send your friends a new iMessage and tell them to only reply to that conversation and delete prior conversations.
    If the cause is (b) have your father de-select (or remove) your e-mail address from his iMessage and FaceTime settings.

  • I have the 4s and my texts are being sent out by my email...not my cell

    I have the 4s and my texts are being sent out by my email...not my cell

    Hi,
    1. Go into Settings
    2. Messages
    3. Send and Receive
    4. Start conversations from > Tap you phone number
    Cheers

  • My phone was recently updated to 8.1.  After the update, when text messages are sent when my phone is off, I no longer receive when my phone is turned on.  Is there something in Settings that needs to be changed?  I never had this problem before the updat

    My phone was recently updated to 8.1.  After the update, when text messages are sent when my phone is turned off, they no longer appear when I turn the phone on.  Is there something in Settings that needs to be changed?

    MetsFanGirl,
    Thanks for verifying. Are you having issues receiving both iMessages and standard text messages when they are sent when the phone is turned off? Try this and test... http://vz.to/1qjiOs7
    LindseyT_VZW
    Follow us on Twitter @VZWSupport

  • BPM wait step : RWB"To Be Delivered status": SXMB_MONI"Message being sent"

    Hi All,
    I have a BPM interface running fine since 1 year.
    In this BPM I have wait step for 5 minutes.
    But yesterday message  is stopped on wait and not proceeding ahead.
    I checked XML is good as per mapping. and in runtime wirk bench message is still in "To Be Delivered status"
    and in SXMB_MONI message column Outbound Status still showing "Message being sent" even after 12 hours.(wait is only 5 minutes). And below is the trace of last message.
    Please guide how to handle or restart this message. in SMQ1 & SMQ2 there are no queues showing:
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Inbound Message
      -->
    - <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
      <Trace level="1" type="T">--start determination of sender interface action</Trace>
      <Trace level="1" type="T">select interface Request_SI</Trace>
      <Trace level="1" type="T">select interface namespace https://www.XXXXX.com/YYYY</Trace>
      <Trace level="1" type="T">--start determination of receiver interface action</Trace>
      <Trace level="1" type="T">Loop 0000000001</Trace>
      <Trace level="1" type="T">select interface Request_SI</Trace>
      <Trace level="1" type="T">select interface namespace https://www.XXXXX.com/YYYY</Trace>
      <Trace level="1" type="T">--start determination of sender interface action</Trace>
      <Trace level="1" type="T">Hence set action to DEL</Trace>
      </SAP:Trace>
    Regards

    Solved, few BASIS jobs were inactive in transaction code "SWF_XI_CUSTOMIZING".

  • Bpm:message being sent and wait for event

    Hi,gurus:
    My scenario is about BPM.In the integration process I used a loop and correlation.The scenario worked successfully yesterday,but after I changed some thing,it did not work.The outbound status of the message in sxi_monitor said "message being sent".And when I clicked PE to see the workflow log, it said " wait for event".
    Thanks in advance.

    Could you tell me how to reimport the integration progress in ID?
    reimport means...delete the already imported BPM from ID.....this would affect the corresponding ID objects....save and activate....and then again run the import Integration Process wizard....create the objects once again.....seems time consuming.....hence mentioned it as the last option in the list:(
    Also from SWWL delete only the instance with status as ERROR.
    Edited by: abhishek salvi on May 20, 2009 9:30 AM

  • Message being sent and wait for event - BPM help.

    Hi Experts,
    I am doing BPM interface, in that i am receiving two files. Between these two files, i have set the coorelation in the BPM and included in the BPM's receive step1 and receive step2. After execution, when i look into the sxmb_moni, message status shows processed successfully, but when i look the Process engine status, it shows Message Being Sent and when i look into the BPM monitoring it shows message wait for event in the coorelation object.
    I have gone through the following forum :
    Link:[https://forums.sdn.sap.com/click.jspa?searchID=27600139&messageID=7561954]
    but everything is green and messages are set to Message being sent status.
    Experts kindly advise me.
    Regards
    Mani.

    Hi Abhishek,
    Here i have given my BPM design,
    Start
    Fork - two branches
    Branch1 - Receive File1
    Branch2 - Receive File2
    Transformation
    Send
    End.
    In coorelatin editor, i have specified container,involved messages and properties clearly.
    I have gone through the SAP basis contents as per your previous reply.
    One thing is, i have used the same design for my other interface, it is going through, but specifically for this interface i am getting error. If you could send me your mail, i will send you the exact screen shots, so that you can advise me.
    Pls i need to complete this in a short period, kindly help me to come out.
    Regards
    Mani..
    Edited by: mani_sg on Jun 18, 2009 10:21 AM

  • Message being Sent in Outbound Staus ccBPM

    hello everybody,
    i'm working with PI 7.1.
    I designed a ccBPM that send data from DB to sap by RFC and update status in DB.
    Everything worked good but last week we made a change harware and migrated all interfaces.
    We have a problem with this interface because in cannot see update in DB (so the last step of ccBPM).
    I don't find any error in xml monitorning, adapter monitor, SMQ1 , SMQ2, sm58. Everything work fine.
    The one one strange thing that i can notify is that:
    in xml monitor we have a row where the OUTBOUND STATUS is not with succes flag but have the status MESSAGE BEING SENT (the clock logo).
    any suggestion?
    thanks in advance
    Alex

    Hello,
    You could check in trx SWF_XI_CUSTOMIZING if there are green ticks for the background jobs.
    Regards,
    Sarah

Maybe you are looking for