Text messages do not send or takes too long to send

When i try to send a text they wont send at all or they will take forever to send. i'll also receive texts 30 minutes after they were originally sent.

First, when was the last time you deleted any messages?  This problem is usually due to too many messages both sent and received.  You might try to delete old threads or start all over fresh.  Also, the SIM may be at fault, so make sure it is seated snuggly and correctly in the slot.  I will say that it takes a long time to delete all messages and also takes time to delete large amounts at the same time.  This is the first 2 steps I would try before going on to anything else.  Again, while deleting, it will take some time and may appear that your phone has frozen.  So, do this when you can let the phone sit idle.

Similar Messages

  • Sending mail take too long time exchange 2011 in iphone4

    when i try to sending mail take too long time.
    stay long time in outbox folder.
    i'm using exchange 2011 in iphone4 with latest updates.

    Hi,
    This is a characteristic of some, but not all, ISPs, and not the SMTP itself. It involves DNS. See:
    http://discussions.apple.com/thread.jspa?messageID=10391853&#10391853
    Ernie

  • Takes too long to send photos

    The photos on my ip4 are too large, when sent with text it takes too long, they megas instead of kilos. Can this be adjusted?

    Daniel:  I took a look at your code and don't see any problem with it.  However, doing the math:
    19,200 BAUD = 19,200 BITS per second.
    10 BITS per BYTE ( 1 BIT start + 8 BITS data + 1 BIT stop = 10)
    19,200 BAUD = 19,200/10 BITS per BYTE = 1,920 BYTES per second
    1,920 BYTES per second / 1000 milliseconds per second = 1.92 BYTES per millisecond (ms)
    Now the above would not be a problem since you are only waiting for one character (which should only take 0.52 ms), however, you are sending 5 bytes.  That's a total of 6 bytes round trip or 6 * 0.52 ms = 3.12 ms.
    In addition, having "Enable Terminating Char" on your VISA Configure Serial Port can't be helping unless your serial LIN device requires it because having to wait for a teminating character on a read or write (in your case it appears you are using a 0x0A or line feed) increases the number of characters that need to be transmitted. 
    Another thought just came to me:  If your serial device is sending a terminating character, it is possible you may have a second read operation each cycle due to the 0x0A (line feed) and the fact that your code only reads one byte at a time from the serial port.  This may also add some time to your response.
    I hope this helps.
    Message Edited by Bill_in_Detroit on 03-18-2010 09:16 AM

  • Text messages take too long to send

    Just reccently upgraded to the new Iphone 5C and now all of a sudden (week later) I've noticed text messages trying to send for hours while others send right away. Not sure why its taking so long??

    the early N series had a problem like this, the solution was to download a programme from Nokia support pages for the appropriate handset
    sms accelerator i think it was called, maybe there is the same for E70, i cant look as for some reason the only nokia web pages i can look at are the discussion pages, anyone else having a problem getting into nokia.co.uk etc?
    Phones I've owned (not in any order) 8210 7100 3510 3510i 7650 9210Communicator 1600 3310 3330 3650 5110 6230 9500Communicator N70 N90 N91 N73(ME) N95

  • Keep gettng messages to update but it takes too long to load, why?

    Keeping getting messages to update FIREFOX. When the link is clicked it takes a very long time to load. Therefore, to date the updates have not happened.

    What is taking too long to load with respect to the page you linked?

  • Why does my signal drops and takes a long time to search and connect when I turn on or off my cellular data? And normal text messages are not getting delivered properly. It shows sent but later it will show try again, Is it just me?

    I do not know what the problem is, but after the latest update it is really hard to send text messages. It is taking alot of time to send the messages, it is not the problem with the carrier because sending text messages with the same number in the same area is really easy on my normal nokia 1100. Please suggest me what I should check. Second problem I am facing is the carrier signal drops to nothing when I turn on the cellular data. It has to then search for the network and connect again the same happens when I turn the data off again. Please tell a solution. I do not think it is the problem with the hardware because the phone is hardly 2weeks old and everything was working properly with ios 6. It initaly had problem with the battery on updating to ios7 but that was rectified with the new update but again these are the new issues am facing.

    This may sound stupid, but I'm gonna throw it out there anyway. Is it possible, that if I have enough junk on my desktop it might disrupt the signal? It seems odd, but it kind of looks like my signal is strong and relatively steady now that I've cleaned my desktop. I do tend to get very cluttered. I use a lot of reference images and save text clippings to use later... it just piles up very quickly.
    So, I wonder if all that extra effort my system has to do keeping up with the junk might have something to do with the drop outs?

  • Why can I receive text messages but not send?

    Why can I receive text messages but not send. This has been happening for about 10 hours.

    Thanks for the response. Must be smart phones. My daughter has a dumb phone and she can send out. I tried deleting my text messages on the Verizon website, but they won’t delete. It must be on their end. Chat line was busy forever, until they shut it down.
    Jennifer

  • HT201401 Why does it take so long to send text message iPhone 5

    Why does it take so long to send text messages on iPhone 5?

    What is telling you that it takes a long time? Do you have a good cellular signal when trying to send a text. Text messages are controlled by the carrier. What troubleshooting have you done on the phone?

  • My text messages will not send out since upgrading to iOS7.0.2.

    My text messages will not send out since upgrading to iOS7.0.2.  What do I need to do?

    It seems Apple has a glitch with text/imessages in iOS7 and they are trying to fix it. Many people get it working again by simply restarting thier phone
    For me, restarting the phone kind of corrects it for awile but then it starts doing it again. My phone gives no indication the messages havent gone out till after I restart it! Huge problem since I cant tell when it quits sending! I have to keep restarting my phone a couple times a day to make sure all my texts went out!
    I also found this procedure but it also seems to be only a temporary fix much like restarting your phone.
    Go to Settings and into Messages and disable iMessage. Go into General then into the Reset tab (bottom of the screen). Next, select Reset Network Settings, confirm the choice, and wait for the iPhone to reboot. Once the phone restarts, toggle iMessage back on again.

  • Text messages will not send

    Sometimes my text messages will not send, could be a pic or 3 word what's changed. On wifi same thing

    This has been discussed time and again here in the forums.  Please use the search function before posting.
    A phone reset or going to Settings > General > Reset > Reset Network Settings resolves the issue.
    iOS7.0.3 will be available next week that resolves this issue. (quote from KalebsDad7  - it was so well written)

  • My iphone 4s voice dictation for text messages is not consistently working. Sometimes it works, other times after the dictation it just gives me a blank space. Anyone else having this problem?

    My iphone 4s voice dictiation for text messages is not consistently working. I've had the phone since Thanksgiving and it always worked perfectly, but the last few weeks it's been hit or miss. Sometimes it works, sometimes it doesn't. Anyone else having this problem? I tried the hard reset but that hasn't fixed it.

    I have the same problem since updating to IOS 8.3. Any app to which I want to send a new link via IMessage does not allow me to select a contact to send the IMessage to. Using a pre-existing thread does not have same problem.

  • Since upgrading to iOS7 some text messages are not being sent, iMessage on my Ipad and MacBook doesn't have my phone number registered and my reminder colour on my Iphone keeps changing ... among other things

    Since upgrading to iOS7 some text messages are not being sent on my iPhone 5, iMessage on my Ipads and MacBook doesn't have my phone number registered and my reminder colour on my Iphone keeps changing ... among other things. Any suggestions to fix these faults?

    Make sure People Sending you via iMessage are sending their messages on your PHONE number not on your EMAIL addresses . My sister had the same problem, thats how i managed to solve it!

  • AirPlay Screen Mirroring (Mavericks) disconnects frequently with "Feedback taking too long to send" message

    My company has several TVs with AppleTVs (3rd generation units) connected in our conference rooms so we can "Screen Mirror" our Mac laptops via AirPlay during meetings. Many employees have complained that AirPlay Screen Mirroring drops frequently during meetings for no apparent reason.
    In attempts to determine the cause of the issue, I removed the AppleTV units from Wi-Fi and hard-wired them all to the LAN (100Mbps/Full duplex, no switchport errors seen on the Cisco switch). I upgraded the AppleTVs to the latest firmware. I had our AppleTV users ensure they were running MacOS Mavericks with the latest software updates installed. I had the Mac laptops hard-wired into the LAN during meetings in the conference rooms. None of these changes resolved the AirPlay issue.
    I reviewed the MacOS "/var/log/system.log" file from the laptops of several users that reported issues. I found a pattern that seemed to indicate that the "coreaudiod" process reported "Feedback taking too long to send" several times before the AppleTV connection was terminated. Also, from a network trace (using "tcpdump") taken during an unexpected AirPlay Screen Mirroring disconnection, I could see that the Mac laptop sent a TCP FIN packet to the AppleTV unit (this would indicate that the MacOS laptop initiated the closing of the AirPlay connection).
    I have included the relevant log file entries below. Please note that the LAN internal to our company is "solid" and there have been no connectivity issues detected or reported during the times the AirPlay sessions were disconnected.
    I believe I have found a workaround to this issue. By going into "System Preferences", "Sound" and then changing the "Output" device BACK to the "Internal Speakers" (rather than the AirPlay destination), the AirPlay Screen Monitoring connection seems to remain stable.
    My questions are:
    - is anyone else experiencing this type of problem? any other solutions recommended?
    - is there a way to change the AirPlay defaults so that Screen Mirroring only sends the video (not audio)?
    - does anyone know what the log file entries indicate (like, what does "Feedback taking too long to send...." mean)?
    - any fix planned for this issue?
    From: "/var/log/system.log":
    Jan 16 10:50:16 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:16.454404 AM [AirPlay] ### Feedback taking too long to send (1 seconds, 1 total)
    Jan 16 10:50:18 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:18.524517 AM [AirPlay] ### Feedback taking too long to send (4 seconds, 2 total)
    Jan 16 10:50:20 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:20.533639 AM [AirPlay] ### Feedback taking too long to send (6 seconds, 3 total)
    Jan 16 10:50:22 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:22.548168 AM [AirPlay] ### Feedback taking too long to send (8 seconds, 4 total)
    Jan 16 10:50:24 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:24.554522 AM [AirPlay] ### Feedback taking too long to send (10 seconds, 5 total)
    Jan 16 10:50:24 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:24.554809 AM [AirPlay] ### Report network status (3, en0) failed: 1/0x1 kCFHostErrorHostNotFound / kCFStreamErrorSOCKSSubDomainVersionCode / kCFStreamErrorSOCKS5BadResponseAddr / kCFStreamErrorDomainPOSIX / evtNotEnb / siInitSDTblErr / kUSBPending / dsBusError / kStatusIsError / kOTSerialSwOverRunErr / cdevResErr / EPERM
    Jan 16 10:50:26 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:26.545531 AM [AirPlay] ### Feedback taking too long to send (12 seconds, 6 total)
    Jan 16 10:50:28 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:28.559050 AM [AirPlay] ### Feedback taking too long to send (14 seconds, 7 total)
    Jan 16 10:50:30 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:30.628868 AM [AirPlay] ### Feedback taking too long to send (16 seconds, 8 total)
    Jan 16 10:50:32 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:32.655638 AM [AirPlay] ### Feedback taking too long to send (18 seconds, 9 total)
    Jan 16 10:50:34 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:34.641952 AM [AirPlay] ### Feedback taking too long to send (20 seconds, 10 total)
    Jan 16 10:50:36 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:36.659854 AM [AirPlay] ### Feedback taking too long to send (22 seconds, 11 total)
    Jan 16 10:50:38 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:38.653594 AM [AirPlay] ### Feedback taking too long to send (24 seconds, 12 total)
    Jan 16 10:50:40 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:40.659279 AM [AirPlay] ### Feedback taking too long to send (26 seconds, 13 total)
    Jan 16 10:50:42 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:42.745549 AM [AirPlay] ### Feedback taking too long to send (28 seconds, 14 total)
    Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.532853 AM [AirPlay] ### Endpoint "AppleTV" feedback error: -6722/0xFFFFE5BE kTimeoutErr
    Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.533151 AM [AirPlay] ### Feedback failed: -6722/0xFFFFE5BE kTimeoutErr
    Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.533273 AM [AirPlay] ### Error with endpoint "AppleTV": -6722/0xFFFFE5BE kTimeoutErr
    Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.533427 AM [BonjourBrowser] Reconfirming PTR for AppleTV._airplay._tcp.local. on en0
    Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.533588 AM [BonjourBrowser] Reconfirming PTR for 9C207BBD8EA1@AppleTV._raop._tcp.local. on en0
    Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.533839 AM [AirPlay] ### AirPlay report: Network dead for 10+ seconds after 159 seconds, screen, nm "AppleTV", tp WiFi, md AppleTV3,1, sv 190.9, rt 0, fu 0, rssi -54
    Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.534104 AM [AirPlay] ### Report network status (5, en0) failed: 1/0x1 kCFHostErrorHostNotFound / kCFStreamErrorSOCKSSubDomainVersionCode / kCFStreamErrorSOCKS5BadResponseAddr / kCFStreamErrorDomainPOSIX / evtNotEnb / siInitSDTblErr / kUSBPending / dsBusError / kStatusIsError / kOTSerialSwOverRunErr / cdevResErr / EPERM
    Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.534315 AM [AirPlay] Deactivating virtual display stream for quiesce
    Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.543682 AM [AirPlayScreenClient] Stopping session
    Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.543815 AM [AirPlay] Quiescing endpoint 'AppleTV'
    Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.543907 AM [AirPlayScreenClient] Stopping session internal
    Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.544218 AM [AirPlayScreenClient] Stopped session internal
    Jan 16 10:50:44 My-MacBook-Pro.local AirPlayUIAgent[985]: 2014-01-16 10:50:44.544266 AM [AirPlayAVSys] ### Quiesce AirPlay
    Jan 16 10:50:44 My-MacBook-Pro.local SystemUIServer[159]: 2014-01-16 10:50:44.544297 AM [AirPlayAVSys] ### Quiesce AirPlay
    Jan 16 10:50:44 My-MacBook-Pro.local SystemUIServer[159]: 2014-01-16 10:50:44.553084 AM [AirPlayAVSys] ### Quiesce AirPlay
    Jan 16 10:50:44 My-MacBook-Pro.local AirPlayUIAgent[985]: 2014-01-16 10:50:44.554904 AM [AirPlayAVSys] ### Quiesce AirPlay
    Jan 16 10:50:44 My-MacBook-Pro.local SystemUIServer[159]: 2014-01-16 10:50:44.557604 AM [AirPlayAVSys] Ignoring route away when AirPlay not current
    Jan 16 10:50:44 My-MacBook-Pro.local AirPlayUIAgent[985]: 2014-01-16 10:50:44.560307 AM [AirPlayAVSys] Ignoring route away when AirPlay not current
    Jan 16 10:50:44 My-MacBook-Pro.local WindowServer[89]: Display 0x04280880: GL mask 0x21; bounds (0, 0)[1920 x 1080], 62 modes available
    Jan 16 10:50:44 My-MacBook-Pro.local WindowServer[89]: GLCompositor: GL renderer id 0x01022727, GL mask 0x0000001f, accelerator 0x00004ccb, unit 0, caps QEX|MIPMAP, vram 2048 MB
    I am happy to provide more information if needed.
    Thank you.
    -Tim

    I'm currently still experiencing this as well. I've confirmed it occurs on 10.9.1, 10.9.2, and 10.9.3 on MacBook Pro Retina's, Mid-2012 and 2013 MacBooks. It happens on multiple ATV's not just one, all are updated to 6.1.1 and a simple reboot seems to fix it temporarily but it does come back. All the ATV's are connecting to the network via Wireless not Ethernet. These are 3rd Gen ATV's but I checked the serial number and these do not match the bad batch of Apple TV's from 2013 that were offered up for Replacement for Apple due to the bad firmware update. None of the computers have the Firewall turned on. Here's the two logs that we always find after the issue occurs (logs are recent, happened this morning):
    5/30/14 8:57:36.017 AM coreaudiod[183]: 2014-05-30 08:57:36.016946 AM [AirPlay] ### Feedback taking too long to send (30 seconds, 17 total)
    5/30/14 8:57:36.332 AM coreaudiod[183]: 2014-05-30 08:57:36.331492 AM [AirPlay] ### Feedback failed: -6723/0xFFFFE5BD kCanceledErr
    The user will get disconnected from Airplay anywhere between 30 seconds to 3 minutes after logging on and can reconnect but then once again get disconnected after the same time period. One interesting thing to note is that when the Feedback Taking Too Long to send error starts occuring and the countdown to disconnect start ticking down to 30, its solely referring to Audio not being sent over the network and Video is working just fine. If I try to play sound I get another log and the sound doesn't play through the speakers. After a reboot, sound works fine and the Feedback Error's do not show up. I've also tried switching to Internal Speakers (since it defaultly switches to Airplay Speakers) after connecting to Airplay and seeing the Feedback timer start in the Console Logs but even after that the log continues to saw its taking too long to send and disconnects in 30 seconds. 
    This issue has been ongoing for months, I've got a ticket logged as far back as January with this occuring but its infrequent enough that we've just restarted and moved on. I'd say its an issue that occurs to about 5%-10% of meetings but that's an entire meeting that doesn't have the ability to Airplay until someone comes down and reboots it.
    I don't often post in this forum but its still an active issue with no resolution, proof that its occuring on other people's systems, and no firmware updates having been released to correct it. It'd be nice to know of any workarounds other than having to buy some lamp timers for each conference room just to get a functional ATV or putting up a sign that says hey if you get disconnected every 3 minutes, reboot the ATV. The whole reason we're using Apple products is for ease of use otherwise I'd put together a much cheaper solution myself. Any help or recommended troubleshooting steps would be fantastic at this point.

  • When I send a text message to my friends Trac phone, my iphone 4s sends two text(even though I am under my 160 count).  He said that it sends one full text and a second with just one word.

    When I send a text message to my friends Trac phone, my iphone 4s sends him two messages(even though I am under my 160 count).  He said that the first message is full and the second one is only one word.  Can anyone help me with this?

    When I send a text message to my friends Trac phone, my iphone 4s sends him two messages(even though I am under my 160 count).  He said that the first message is full and the second one is only one word.  Can anyone help me with this?

  • I just recently upgraded from a 3gs to a 4s and since i upgraded text messages are not coming in or going out unless i'm texting another iphone?

    I just recently upgraded from a 3gs to a 4s and since I upgraded text messages are not coming in or going out unless I'm texting another iphone?

    http://support.apple.com/kb/TS2755

Maybe you are looking for

  • In Business content activation

    Hi, What is 1. In data flow before? 2. In data flow Afterwards? 3.Before and afterwards? Why we are using this? While doing best practice in the documentation it is given as to choose " in data flow before", what is the purpose? Can anyone explain...

  • Hi actually I want to tell you I didn't get my refund yet.

    Hi actually I want to tell you I didn't get my refund yet. I am sending you the invoice. Please refund the money. Because the company I did contact with they said to contact to you. Please help me out to refund my money. On 10/07/2013, at 9:35 AM, iT

  • 8.1.7(WE) needs to go to 10g(UTF8).. need assistance in characterset change

    Folks, Here is the situation: I have this 8.1.7 db in Western European characterset. --I need to upgrade this db to 10g (latest version), --I need to make it UTF in 10g. Can the characterset change is possible during db upgrade? Or I can do the chara

  • .csv vs. .txt file

    Since I upgraded to Lion, when I download a .csv file from my bank it saves it as a .txt file in the Downloads.  Prior to Lion it downloaded it as a .csv file which made it much easier to save in Excel (Office for Mac).  Is there a setting that I can

  • Cant Launch Firefox from Mac with UTF8 International Domain name

    From a Mac running OSX 10.7, I Launch Firefox with a UTF-8 string containing an international domain name: I try to launch http://www.vihtilä.fi and Firefox responds: Can't connect to http://www.vihtil\xc3\xa4.fi but the address bar string is correct