Text Module in SMARTFORMS

Hi ,
I am trying to append a text at the end of main window at any page ..when ever main window ends.for this I created a text module in transaction SMARTFORMS.and tried to add it into the form when I am doing it ..How should I select the options in the TASK KEY..there are 4 things to be filled
TEXT NAME :
TEXT OBJECT : ???
TEXT ID :??? (I am doing a print doc for deliveries)
LANGUAGE
Anyone help me out of this ASAP

If you created a text module that you want to include in your form, you don't refer to it like that.
Once you selected the area / window your text should be in, right-click on the window name, select Create -> Text. Then, in the 'General Attributes' tab, you have to change the type to 'M' (Text module). On the next screen, you just specify the name of your text module that you want to include and the language key. You can specify under 'Conditions' that your text should only be displayed before or after the end of the main window (or whatever your requirement may be).
Now if you want to include an already existing text (that you created via SO10, for instance), then you have to select the type 'I' instead. For SO10 texts, the text object will be TEXT, and you should know the other three parameters if you were the one creating the text. Obviously, the text object will change to another value if you want to include an application-dependent text - then, as it was mentioned, SE75 will help you find the proper object name.
I'm not sure where do you see the "options in the TASK KEY"... hope this helps a bit though.

Similar Messages

Create Text Module in smartforms

Hi guys,
How can we create text module in smartforms? and I need this to be translated into other languages...
Thanks a lot!
Always,
Mark

Hi,
In the smartforms initial screen you can find Test module radio button.
Provide the name and create the text there.
In the following screen you find Management tab, where bydefault translate to all language radio button is selected.
Thanks,
Phani Diwakar.

Translations,folders and text modules in smartforms

Hi Everyone,
Please help me to learn :
1. Translations into different languages in smartforms
2. Creating folders in smartforms
3. Creating and the usage of text modules.
4. More information about page navigations in smartforms.
Helpful links and reference material would be helpful.
KK

hi kk,
text modules:
these r like global texts, which we created once can be used in any smartform.
u can create this in t-code: smartforms
select the radio button text modules, in the editor give the text which u want.
to use this in our form:
select the window -> create text
in genaral attributes -> text type -> select text module
give the name, language(generally en) which u created. then it gets the text which u gave in text module.
note: when using existing text modules, as we r not aware of text size, it is better to use them in main window. so that we wont lose any data.
hope it helps u. reward if helpful.

URGENT: Copying text from word doc to text module in smartforms

Hi ALl
I have a problem, when i copy texts from word documents to smartforms, some words getting clubbed together. there is no space. I tried justified and left aligned. In both i am getting problem like this. Is there any special way to copy and paste the text to text module from word.
Thanks
Murali

Try to copy to notepad first, then copy to the text module.

Copied TEXT MODULES or SMARTFORMS is required to translated into other lang

Hi all,
Actually I copied standard form HRRCF_CS_IT_EXA_QUESTIONNAIRE and Text Module HRRCF_CS_MT_QUESTIONNAIRE
into Z FORM and Z TEXTMODULE.
Standard ones have already converted into other languages like GERMAN.CHINES.etc, SO Do I NEED TO CONVERT MY Z FORM and Z TEXT module into convert into other languages explictly or std functionality is applicable to my Z* ones. please confirm on this.
I logged into DE , I gave my Z text moudele name in SMARTFORMS, I am able to see GERMAN TEXT.

The translation would be applicable to your 'Z' version as well.
Hope this answers your question.
Thanks,
Abhishek

Difference between Include Text and Text Modules in Smartform?

Hello Experts,
I need to know the differences between Include Text and Text Modules in the Smartform.
When we create a Text in smartform, the text type can be text element Or Include Text Or Text Module.
Now i need to know the differences between Include Text and Text Module.
Thanks and Best Regards,
Suresh

Hi Suresh,
Kindly check the below link for Text Modules.
[http://help.sap.com/saphelp_nw70/helpdata/EN/24/ccbd2a00c811d4b588006094192fe3/content.htm]
For Include Text:
[Include Text|http://help.sap.com/saphelp_nw70/helpdata/en/03/7560efcf0d11d3b565006094192fe3/content.htm]
Regards,
-Syed.

Very Urgent Text Modules - Smartform in diff lang

Hi,
Could any one give me a detailed info on how to use one text module in Smartform to other languages without logging into the system in that language.
I tried Example in the thread containing as below nut unable to succeed.
/: INCLUDE z_txt OBJECT TEXT ID txt LANGUAGE &Variable&
Name: z_text
Object: Text
Text id: Txt (Text id from SO10)
Language: variable[/code][/code][/code]
Its very Urgent
Thanks
Dan

Dan...
you want to give the Language for Text elemetn dinamically..
in genaral attributes of the Text Module winodow..
Text name: xxxxxxx
Text Object: Text
Text ID: ST
Language: as below...
so wht i am suggesting is give the &CONTROL_PARAMETERS-REPLANGU1& (if it contain the Language)..
in Language tab.. Press the button right side of this element ">" then the text box will be become large.. then enter &CONTROL_PARAMETERS-REPLANGU1&..
if it is not clear plese tell wht exactly you r requirement again
Please Close this thread.. when u r problem ise solved
Reward if Helpful
Regards
Naresh Reddy K

Pls explain how to add standard text in sapscript & smartforms

Dear friends,
pls explain how to implement standard text into sap script and smartforms.
in how many we can do.
and what is diff between include text & text modules in smartforms.
how we can translate into multiple languages.
Regards
Jagadeeshwar.B

hi,
for the include text goto tcode so10.
for changing the smartform and scripts use there methods..
1. goto se63>translation->abap objects->other long texts->FS Forms and Styles---> for scripts use Forms
                                       for smartforsm use SAPSmart form
                                       for styles use Styles
2. goto se71->utilities->original language.---> source lang
(for scripts)                                                     target lang
to include the include text created in the tcode so10 in the smartforms go to general attributes of the text element--text type> include text...
regards,
venkat.
Edited by: venkat appikonda on Mar 22, 2008 11:56 AM

How can I edit a Text Module in Landscape

Hi to all,
I would like to create a new Text Module in Smartforms and I would like to know if the graphic editor, similar to MS-Word, can be setup to display the page in Landscape?
My text is always edited in Portrait format and I would like to avoid calculating my characters to fit in a larger landscape presentation format.
Thank you in advance for your answers.
Best regards,
Sylvain

Hi,
Thank you all for your answers but I still have the same issue.
@ Hari,
I tried your procedure and found that I was using DINA4 as a default page format. In SPAD this format was defined for Portrait and Landscape. I created a new page format ZDINA4 with a larger width but the text module presentation remains the same. I only defined the landscape record and I have the same result by clicking Print Layout or Draft. Do you know if this page format has an influence on the Text Module presentation? I would like to put the ruler much wider that it is locked at 21. Any suggestion on how to enlarge the ruler?
@ Adrian,
Yes I know how to set up the page format in the Smartforms itself but I am talking about the text module. My key user will create the Text Module and I would like to have the same width as my landscape page in the form. If will make things easier for the user to make the data entry since it looks like MS-Word except for the Portrait/Landscape issue. Any idea?
Thank you in advance for your suggestion.
BR,
Sylvain

Text module

Hi friends,
Could any one tell me what is "Text module" in Smartforms.
How we use them in Standard Smarforms .
With Regards,
Ramesh.

Hi ramesh,
In smartform there are three text types:
Text element : to enter new text in the PC editor
Text module : to include a text module
 Include text : to include an existing SAPscript text
The texts are displayed in the form using text nodes. The only exceptions are addresses. This uses its own node. The predecessor node of the text node determines its use:
Predecessor node Used to
Sub window Position text on one or more pages
Main window Display text in relation to other nodes in the main window,
 it may cover several pages
Template Displays texts for table cells of a static table
Table Display table contents
Header and footer Display column headings and grand totals in tables
Event node Display subtotals in a table
Including text modules:
Text module of the text node is used to refer to an existing text module in the system. The text modules can be used in two ways:
STEPS :
1) Refer to the text module. The text then appears read-only in the PC editor and
 is included when the form is printed.
2) Copy the text module. The system then copies the text of the module and
 automatically converts the text node into an editable text element.
3) To create a text node , call the context menu for that node in the tree
 structure that shall contain the text and choose create->text
4) Enter a unique name for the node and a description
5) On the general attributes tab select the text type text module
6) Enter the name of the text module in the text name field
reward points if useful....
thanks ,
Ginni...

TEXT MODULE UPLOAD

Hi,
Any FM to upload Text Modules?
SSFCOMP_WRITE_TEXT doesnt help.
Rgds,
Mano

Hello ,
I am talking about text modules for smartforms.
I have maintained them in EN , i need to maintian them in DE now.
I dont want to go to each Text module and create again, i want to put my texts in flat file and do a one tiem upload.
Thnx for your time on this.
Rgds,
M

Text from text module is not appearing in smartform output

Hi Experts,
We are using text modules in one of our smartform to print the sender text . The name of this text module is being dynamically determined during the execution and is coming correctly but still the the text inside the text module is not appearing in the output. We checked one more similar form which is working on the similar logic but calling a different text module , there it is working perfectly. I have tried all the possibilties like changing the window size, changing the fonts and other parameters of the text module but still its not appearing . This seems to be something unusual as in both the smartforms(one with text appearing from module and one without the text) the logic is exactly similar for getting the text module name. The name is getting determined in both the cases correctly and the text modules are also maintained in same manner for both these forms but text is appearing on one and not on other.
Kindly help if any one of you have also faced similar issue.
Regards

Hi Priyank,
There could be various reasons....
Wrong language for example
An easy way to prove this is, put the text direct into the smartforms and see, if it pops up immediately.
If so, you have to really debug this spot and see if the pased name is correct. (Copy paste it in the debugger, to be really sure, there could be a space in fornt or in the end...)
If that doesn't help, you have to share more details. Your question is not that very specific. You know
~Florian

How to print the texts retrived by using READ_TEXT fun module in Smartform

Please tell me how to print the text which is rertrived by using the READ_TEXT function module in smartform.
I have coded all things in the program lines and in that i am retriveing the long texts.
I am getting the text lines in my internal table clearly, the thing is that I am not able to pass these lines to the text.
I have to print the trouble ticket. in that the notes log I have to pass.
its urgent. Points will be rewarded for any type of clue. whether it will work or not.

There are a few ways to do it. If you need to take all of the text in the text type, in your SF text element choose "Include Text".
Populate the fields with the data that corresponds to the text type. It is similar to the interface to the FM "Read_Text.
Text Name
Text Obje
Text ID
Language
Encase any variables with the "&" symbol.
If you have already coded the call to the FM "READ_TEXT" and loaded the text into an internal table, create a loop and loop through the itab. Inside of the loop create a text element and add a variable in the text element for the field you are looking to output.

How to print text rertrived by using the READ_TEXT fun module in smartform

Please tell me how to print the text which is rertrived by using the READ_TEXT function module in smartform.
I have coded all things in the program lines and in that i am retriveing the long texts.
I am getting the text lines in my internal table clearly, the thing is that I am not able to pass these lines to the text module.
its urgent. Points will be rewarded for any type of clue. whether it will work or not.

loop the table into which u have retrieved the text .
in the form interface of the smartform ... in importing parameter give the that table name .
and in smartform whereever u want to print there insert the data into work area and pass to fields for dispaly .
decalre ur work area in global defintions
thnaks .

Problem related to language translation in Smartforms using Text Module.

I have done translation of text module from English (enUS) to Spanish (esSP) using SE63. In text node I have used this translated text module. Language of the node is selected as sy-langu. So when I logged into System in English language I should be able to see the output in English but it giving output in Spnaish. While debugging sy-langu value is 'E'.

hi,
You have a text in english and you have maintained the translation in Spanish, mention the original text in the SmartForm. in this way when your login lang is EN you will see that text in Eng and if the lang is Spanish you will see the translation in the output.
Thanks.

Text Module in SMARTFORMS

Similar Messages

Maybe you are looking for