Text Module place holders

Hi Experts,
Can anybody help me to find out the table name in which the place holders( ex: &matnr& ) of the text module are stored.
As part of my requirement i have used around 100 text module. Each text modules has around 20 place holders. I know the table name in which the text module are stored but is there any table in which the place holders of text modules are stored?
Regards,
TMR.

Hi
I think they are stored in a cluster table, just like the sapscript, try to check the function group STXC, perhaps there a function can help you.
Try to check fm SSFRT_READ_TEXTMODULE
Max

Similar Messages

E-recruitment 6.0 - Smart Form - Text Module - Qualifying Event

Hi all,
Once more a question:
E-recruitment 6.0
Smartforms with invitation letters (for example for an interview)
In the recruiter's portal we use a 'qualifying event' to 'set' an appointment' , date, time, place etc.
We use the input from this reference activity in the text module of the smartform.
The text module holds the main text of the letter.
The text from the module appears in the recruiters portal when the recruiter performs activity 'send letter' (act. type: invitation) so that he can add some text manually if he likes.
This functionality is in E-R6.0 since SP7
It goes well when the recruiter does not add anything manually. The variables load in the smartform and it works as wel wanted.
BUT when the recruiter manually changes the letter (the text module) in the recruiters portal, all variable are lost from the letter.
I hope someone can help me out.
Edited by: N. Lodewijk on Dec 4, 2008 11:57 AM

You need to use the functionality "Changeable letter".

Command lines in text module is not working in adobe forms

Hi,
I have a problem, I have a text module with variables and I placed it in Adobe form its working fine, my problem is I added a command line /: NEW PAGE in the text module, it couldn't trigger a new page at that place.Can anyone help me out in this regard.
Regards,
Manohar.

Hi Manohar,
Adobe wont support text modules with commands.
Explain your requirement.
pavan meda

Use of SAP Smart Forms - Text Modules

Hi!
One or two questions regarding the SAP Smart Forms text modules.
First: In which table the text name is saved? Is there something like the STXH table for SapScript Objects?
Second: Is it possible to use SmartForm text modules in the text determination for SD (Invoice e.g.)?
I´m looking forward for many answers
Greetings
Mark

Hi,
From STXL table u can get the text object, id n name pertaining to a text .These things put in FM 'READ_TEXT'. u get the long text...
Instead in smartforms, u can directly include texts using Create-Text, Type Include text...enter the id, name ,lang and object....
Also, for text names, objects and ID..u go to the place where long text has been entered, enter the sapscript editor from there, goto Header...u ll get all the detaails..
hope it helps,
Regards,
Bikash

Smartform - text module - qualifying event

Hi all,
Once more a question:
E-recruitment 6.0
Smartforms with invitation letters (for example for an interview)
In the recruiter's portal we use a 'qualifying event' to 'set' an appointment' , date, time, place etc.
We use the input from this reference activity in the text module of the smartform.
The text module holds the main text of the letter.
The text from the module appears in the recruiters portal when the recruiter performs activity 'send letter' (act. type: type invitation) so that he can add some text manually if he likes.
It goes well when the recruiter does not add anything manually. The variables load in the smartform and it works as wel wanted.
BUT when the recruiter manually changes the letter (the text module) in the recruiters portal, all variable are lost from the letter.
I hope someone can help me out.
Edited by: N. Lodewijk on Dec 4, 2008 11:47 AM

You need to use the functionality "Changeable letter".

How many place holders must remain for a blog page to work?

I want to delete most of the place holders and I do not want to retain a photo holder? But, I can't get some of the place holders to delete. Thus, the question, which place holders are essential for a blog page to work? The goal is to make my own blog template. I've read the manual, watched the tutorial, read the iWeb help pages re blogs - nothing is presented in sufficient detail. I'd like help.

It seems that you cannot delete the essential placeholders. Note the dark colored handles of the objects. But you can delete the photo placeholder.
To test, type +select all+ (Cmd-A) and hit the delete button. What's left is essential.
Everything else is yours the change, including the fonts of the essential text elements.
To really change the templates, you have to dig into iWeb and edit the xml files. I admit that editing the xml files is not mentioned in the tutorials.

Text Module Language Definition

Hi all,
I am not able to identify the exact place to define German terms corresponding to header text module text in se 63 transaction.
Can anybody help me?
Thanks N Regards,
Smita

Hi,
In SE63 we have to translate the texts.
To do the same, go to translation SE63.
Click on Translation -> ABAP Objects -> Other Long Texts
Select Smart Forms from the list,
i.e below FS Forms and Styles
In the following screen, enter the name of the Smart Form created earlier. Also provide the source language and Target Language to be maintained
Enter the translation for the text in your required language.
Then you need to transport the program..
Now to assign a transport request for the above transaction, execute the program RS_LXE_RECORD_TORDER.
Enter the target language, Short Description for the transport request, object type as SSF.
check your target language .
check the create own request
and object type SSF.
Click on execute.
To check the output , login in the language in which you had translated .
execute the smartforms and watchout the result .
Thanks
Naveen
More Info : https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action?pageId=31187

How do I stop an unwanted pop-up, "Click on Sign to add text and place signature on a PDF File"?

Whenever I open a PDF using Adobe Reader X, a pop-up appears at the upper right-hand corner of the document display window that says "Click on Sign to add text and place signature on a PDf file".
Is there some way that I can stop this pop-up from appearing everytime I open a PDF?
Thanks.

Click on "Sign" so that the Sign pane opens and leave it open for a few seconds. It wont re-appear if you re-launch Reader now.
HTH.

Text from text module is not appearing in smartform output

Hi Experts,
We are using text modules in one of our smartform to print the sender text . The name of this text module is being dynamically determined during the execution and is coming correctly but still the the text inside the text module is not appearing in the output. We checked one more similar form which is working on the similar logic but calling a different text module , there it is working perfectly. I have tried all the possibilties like changing the window size, changing the fonts and other parameters of the text module but still its not appearing . This seems to be something unusual as in both the smartforms(one with text appearing from module and one without the text) the logic is exactly similar for getting the text module name. The name is getting determined in both the cases correctly and the text modules are also maintained in same manner for both these forms but text is appearing on one and not on other.
Kindly help if any one of you have also faced similar issue.
Regards

Hi Priyank,
There could be various reasons....
Wrong language for example
An easy way to prove this is, put the text direct into the smartforms and see, if it pops up immediately.
If so, you have to really debug this spot and see if the pased name is correct. (Copy paste it in the debugger, to be really sure, there could be a space in fornt or in the end...)
If that doesn't help, you have to share more details. Your question is not that very specific. You know
~Florian

How to add internal table fileds in Text module in smart forms

Hi Friends,
How to add internal table fileds in Text module in smart forms?
Thanks & Regards,
Vallamuthu.M

Hi Vallamuthu ,
how did you solve your problem?
thanks,

How do I remove all traces of 'album'? I do not want artwork, blank place holders, titles or artists sorted by album? I just want my music listed by title, artist or genre.

How do I remove all traces of 'album'? I do not want artwork, blank place holders, titles or artists sorted by album? I just want my music listed by title, artist or genre.

1, you can't at the moment, though with iOS 5 in the Autumn, from http://www.apple.com/ios/ios5/features.html#photos :
Even organize your photos in albums — right on your device
2, by removing it from you synced from and re-syncing. Only photos taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad (either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view)
3, the location of the photos that you synced to the iPad should be listed on the iPad's Photos tab when connected to your computer's iTunes.
4, you can copy the photos from your iPad to your computer : http://support.apple.com/kb/HT4083 . You should also be able to delete them from the iPad as part of the transfer process to your computer, and it's then your choice whether to add them to your sync photo list so as to copy them back to the iPad. Copying them to your computer would allow you to organise them into folders and therefore be able to sync them back into separate albums.
5, I don't use Dropbox either. There are some third-party browser apps in the iTunes App Store that allow you to download pages so that you can view them when offline e.g. Atomic Web (the whole page is saved within Atomic Web, it doesn't place a photo into the Photos app)
6, deleting content should help. If you remove an app from your iPad then you also remove the content that it's got on the iPad - so if you then decide to reinstall it back onto the iPad then you will need to manually add back any content that you want in it. None of the Apple built-in apps (including Photos) can be removed from the iPad

How to use the text module in script

hi,
i script how to use the text modules and how to write the code in layout of the script?

Hi,
You canr use text modules in script. You have to use standard texts .
Standard text are maintained in SO10 transaction.
you can create translation text for other languages also . So based on logon language it will print translation text.
go to SO10
give textname it say Ztextname id as ST and language as EN
say create, then you will get editor there maintain your text and save it . then come back . Now change language (say for german DE) say create and eneter translation text and save it.
so now you have created a text called ztextname which you can use in your script.
Inorder to insert the texts in your script do as below
go to any window editor and select path
Insert->texts->symbols->standard symbols
then you will get popup in which you have to mention all the parameters that you have created earlier.
after inserting just change language EN to sy-langu
Reward points if useful
About text elements Sravan already given some informatiomn
Regards,
Nageswar

Print multiple pages of text module as Terms and Conditions at end of PO

Hello,
I have a text module that contains a two page terms and conditions to print as the last pages of a PO.
I have three pages
FIRST-->Calls NEXT
NEXT--> Calls NEXT with a command to LAST in the MAIN window
LAST-->Calls Last, has a MAIN Window and a regular window which calls text module
The text module only prints on the first page in the end of the PO(i.e.last page). It does not flow or create an additional page for the left over text in the text module.
Please advice.

Hi,
We have same situation. What I did was to introduce a new element in MAIN WINDOW ( by the way only FIRST & LAST pages are sufficient, no need to have additional page for printing Terms & Conditions ) in that element just have 2 lines viz.:
/: NEW-PAGE * Above command so that terms & conditions will always start from a new page.
/: INCLUDE ZPO_TERMS_AND_CONDITIONS OBJECT TEXT ID ST LANGUAGE EN
If terms & conditions are more than a page it will automatically be printed on the next page. ( In our case currently we have got 5 pages of terms & conditions ).
At the end of the program i.e. When you are finished with printing of a PO just 'WRITE' this element using WRITE_FORM.
I hope this helps,
Regards
Raju Chitale

When using private browsing to view image results in Safari 5.1.3, only the first two rows of results are visible, the following four or so rows display greyed out place holders, and the safe search button is inoperable. Suggestions?

When using private browsing to view image results in Safari 5.1.3, only the first two rows of results are visible, the following four or so rows display greyed out place holders, the remainder of the results page is blank, and the safe search button is inoperable. When I turn off private browsing and refresh the page, everything works again.
Anyone else having this problem?

I have got the same behaviour after the last Safari Update to 5.1.3. It seems that Safari now handles some scripts in a new way. If you debug the Google Website, you will see, that there is some Javascript Error, that seems to prevent to write into local cache. After some searching I wasn't able to finde a solution for this problem, other then disabling Javascript while private browsing to prevent the script loading. You then are able to use Google with the old layout. The option to disable JavaScript can be found in the Menu "Developer", wich has to be enabled in Safari in the options first.
In my opinion this is a bug that is now occuring, because Apple changed something in private browsing and that has to be fixed by Google now, to run again. Or we will have to wait for 5.1.4, as you can read online Apple will change and bugfix the javascript engine in that version, perhaps this fixes the problem as well. I hope so!
If anyone is in the developer program perhaps you could test this with the beta of 5.1.4 and tell us if it works.

Text Modules in different languages

Hi,
I want to create a TEXT MODULE in different language. For example, i created a Text Module in English language. I want to create in german with the same Text module name as in English language.
Example: Text module name ZTEST (EN) and ZTEST (DE).
Any help is appriciated.

Create text module at SO10 Transaction,first create En Language ,then use formatting options from Style transaction (SE72 - create paragraph format ,charcter format )..
again create same text module with diffrent language ,but same formatting option may not applicable,you have to use diffrent ones..

Text Module place holders

Similar Messages

Maybe you are looking for