Text need to be added in the packign list of the output

*We had an issue to add the text for the packign list output type ZL10.*
*This is required for only one customer.*
*I had tried to add the text manually in the delievry level and tried to print but it didn't work.*
*It is printing for the delivery note not for packing list.*
*Need help on this issue.*
*your valuable post will be very helpfull for me.*

Hi,
From the transaction NACE, get the print program attached to your output type "ZL10". If you can read the code, please set a break point and see how it is determined in the delivery note output. Then check why it is not coming for your packing note.
If not ask your ABAP developer to check same for you!
Best regards,
Rahal

Similar Messages

Any idea when GTX 970's will be added to the supported list in the latest version of premiere? id like my cuda.

Any idea when GTX 970's will be added to the supported list in the latest version of premiere? id like my cuda.

I Too would like to know. I've finally finished upgrading my rig with a 970, and as far as I know, there's been some good things and not so good things. (I'm on CC 2014.1 with Windows 8.1 Pro) I'll post screenshots when I get back to my computer.
FIrst things first: Make sure to install the CUDA specific to the 970/980. They have their own toolkit, that I believe people miss. I installed this, and then manually added my card to te supported cards file in the Premiere, AE, and Speedgrade files. When I opened Premiere, it's automatically set to use CUDA acceleration, so I believe it's supported there. I wasn't able to test this, unfortunately. I will confirm this soon.
Second, when I open After Effects, the Previews preference pane states my card is supported, and all the info below it seems correct, like the shader model. The only thing that seems off is the OpenGL, which is set to 2.1.2 NVIDIA or something of the like instead of 4.x, but I believe its an NVIDIA optimized driver, so I'm not too concerned. The big thing for me is the error message that I recieve when I try to enable Ray-traced 3D. I recieve a compilation error, followed by another message, and I have no clue what to do with them.
I'm really hoping Adobe releases an updates that bring full native support for these cards, as I'm running an class at my high school where I need to build three machines, all of which will have a 970 inside, and if Adbe doesn't support these cards, I'm kind of screwed as the pipeline is based completely in Adobe with its Dynamic Link and CUDA acceleration. Come on Todd, we believe in you!
TL;DR Yes, CUDA acceleration should work within Premiere Pro CC 2014.1, but make sure to install the correct CUDA drivers from NVIDIA (they should be in the yellow boxed text on the downloads page)

I need any items added to a wish list to display alphabetically rather than randomly?

I need any items added to a wish list to display alphabetically rather than randomly?

If I want to carve off part of a library, I presume the way to do this is to make a copy of the library using PLM then go into iPhoto and delete what I don't want. The result is the carved off portion.
You don't need Library Manager to delete the portion you don't want.
As a general rule: when deleting photos do them in batches of about 100 at a time. iPhoto can baulk at trashing large numbers at one go.
If I want to merge two libraries, PLM implies that it will do this but will the Faces be merged too?
I believe so.

Would like to purchase PSE 12 to process Camera Raw files for the following cameras: Nikon D800, Nikon DF, Canon G9 and Pentax K-3 does the Raw Converter that comes with PSE 12 when purchased recognize the cameras listed in the question or do I need to

Would like to purchase PSE 12 to process Camera Raw files for the following cameras: Nikon D800, Nikon DF, Canon G9 and Pentax K-3 does the Raw Converter that comes with PSE 12 when purchased recognize the cameras listed in the question or do I need to download the camera Raw Version 8.3 ?

While the G9 RAW files can be read by Adobe Camera RAW and Lightroom, these file are unsupported at this time. Here is a link to Adobe's latest list of cameras that are supported and this list came out yesterday http://www.adobe.com/products/photoshop/cameraraw.html
I have not done a comparison between Lightroom and Canon's software but others have and say that Canon's software is clearly better. I am sure when Adobe updates their software again to include the G9 it will be a very good RAW converter as it is will most other cameras.

I've a new account on iMac. When composing an email the contact list does not show up on the bar. WWhen I start keying in a name, it comes up with the address. How do I engage the contact list from the email?

I've a new account on iMac. When composing an email the contact list does not show up on the bar, which would allow me to select the persons I want to include on the distribution of the email. When I start keying in a name in the email, it comes up with the person's address, which shows it is synced. How do I engage the contact list from the email like I do on my old account (where a contact list icon shows up, along with the "attach" and other icons) ?

With the New Message window open, go to the View menu and select "Customize Toolbar...".
In the screen that opens, drag the item labelled "Address" into the Toolbar area of the New Message window, then click the "Done" button.
That item should be then added to the Toolbar for the New Message window.
Note that the main Mail window and the New Message window (as well as the separate message window if you open a message that way) use different toolbars - the settings/inclusions for one do not carry over to another.

Where are the favorites list in the apple tv?

i add a podcast to the favorites but afterwards i cannot find where the favorites menu is in the latest ios for appletv 2. So where are they?

i go to internet then podcasts there are only 4 menus and no favourites menu
top podcasts
featured providers
genres
search
unplugging for a bit and restarting makes no difference
i am adding favs by finding a podcast (i have done this to a few) and choosing add to favorites then the add to favorites menu choice changes to remove from favorites so it must be added somewhere. still no list anywhere
the only menu i can find any sort of favorites is under youtube but the podcasts are not added there only youtube ones
I can add a radio staion to favourites and it creates a new menu under radio staions called favorites so it seems to only be podcast favorites that are missing

How can I change the ordering of the parameters listed under the Labview module?

Is there anyway to change the ordering of the parameters listed in the parameters table under the Labview module tab in TestStand? Each of these parameters printout in my report, but I need to change the ordering of the parameters in the report. Thanks.

Hi,
There is not a way to manually change the order of the parameter values in the Code Module Parameters Table, but there are a few options for configuring the report ordering of these parameter values.
Option 1: Use the Additional Results in the Properties tab to add a Custom Result. You can then save the parameter values to these custom results and order them they way you desire. This ordering will be reflected in the report.
Option 2: You could use a Post Action in the Properties tab to swap the parameter values that are saved to Locals.ResultList[0].AdditionalResults at run-time. This would require the use of a local variable to serve as a temporary placeholder for one of the values in order to successfully swap the values.
-Adri
Adri Kruger
National Instruments
LabVIEW Product Marketing

Can you have two detail lists from the basic list at the same time?

Hi
Can you have two detail lists from the basic list at the same time?
If yes how and if no why?
Thanks
Venkat

No   ... it is not   possible   of   2 detail list at   one time   from the basic list ...
you can increament   the SY-LSIND .... But you can not   display both the windows   at single time ...
it is possible to display 2 Detail list in ALV   ...... from one basic list   using the Blocked list concept    .
Sample Program on BLOCK LISTS
Report   zblock_list
* Declarations for BLOCK ALV DISPLAY
*--type pools
TYPE-POOLS:slis.
DATA:x_layout TYPE slis_layout_alv,
t_field TYPE slis_t_fieldcat_alv,
*--field catalog
x_fldcat LIKE LINE OF t_field,
*--to hold all the events
t_events TYPE slis_t_event,
x_events TYPE slis_alv_event,
t_sort TYPE slis_t_sortinfo_alv,
x_sort LIKE LINE OF t_sort ,
*--Print Layout
x_print_layout TYPE slis_print_alv.
*----Macro to add field catalog.
*field "text "length "tech "COL_POS "DATATYPE "DDIC_OUTPUTLEN
DEFINE add_catalog.
clear x_fldcat.
x_fldcat-fieldname = &1.
x_fldcat-seltext_m = &2.
x_fldcat-outputlen = &3.
x_fldcat-tech = &4.
x_fldcat-col_pos = &5.
x_fldcat-no_zero = 'X'.
x_fldcat-ddictxt = 'M'.
x_fldcat-datatype = &6.
x_fldcat-ddic_outputlen = &7.
if &6 = 'N'.
x_fldcat-lzero = 'X'.
endif.
*--build field catalog
append x_fldcat to t_field.
END-OF-DEFINITION.
*----- data declerations.
data: v_repid like sy-repid.
data: begin of itab occurs 0,
matnr like mara-matnr,
ernam like mara-ernam,
meins like mara-meins,
end of itab.
data: begin of jtab occurs 0,
matnr like makt-matnr,
maktx like makt-maktx,
end of jtab.
select matnr ernam meins
up to 20 rows
from mara
into table itab.
select matnr maktx
up to 20 rows
from makt
into table jtab.
v_repid = sy-repid.
*DISPLAY alv
* Initialize Block
call function 'REUSE_ALV_BLOCK_LIST_INIT'
exporting
i_callback_program = v_repid.
*Block 1:
*INITIALIZE
refresh t_field. clear t_field.
refresh t_events.
*field "text "length "tech "COL_POS "DATATYPE "DDIC_OUTPUTLEN
add_catalog:
'MATNR' 'Material' '18' '' '1' 'C' '18',
'ERNAM' 'Created By' '12' '' '2' 'C' '12',
'MEINS' 'Unit' '5' '' '3' 'C' '3'.
*--build table for events.
x_events-form = 'TOP_OF_LIST1'.
x_events-name = slis_ev_top_of_list.
append x_events to t_events.
call function 'REUSE_ALV_BLOCK_LIST_APPEND'
exporting
is_layout = x_layout
it_fieldcat = t_field
i_tabname = 'ITAB'
it_events = t_events
it_sort = t_sort
tables
t_outtab = itab
exceptions
program_error = 1
maximum_of_appends_reached = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
*--BLOCK 2(SUMMARY REPORT)
*INITIALIZE
refresh t_field. clear t_field.
refresh t_events.
*field "text "length "tech "COL_POS "DATATYPE "DDIC_OUTPUTLEN
add_catalog:
'MATNR' 'Material' '20' '' '1' 'C' '18',
'MAKTX' 'Description' '40' '' '2' 'C' '40'.
*--build table for events.
x_events-form = 'TOP_OF_LIST2'.
x_events-name = slis_ev_top_of_list.
append x_events to t_events.
* Append table block.
call function 'REUSE_ALV_BLOCK_LIST_APPEND'
exporting
is_layout = x_layout
it_fieldcat = t_field
i_tabname = 'JTAB'
it_events = t_events
tables
t_outtab = jtab
exceptions
program_error = 1
maximum_of_appends_reached = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
*--CALL FM TO DISPLAY THE BLOCK REPORT.
call function 'REUSE_ALV_BLOCK_LIST_DISPLAY'
* exporting
* is_print = x_print_layout
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
form top_of_list1.
skip 1.
write: 10 'List 1',
/5 '--------------------'.
skip 1.
format reset.
endform.
form top_of_list2.
skip 1.
write: 10 'List 2',
/5 '--------------------'.
skip 1.
format reset.
endform.
reward points if it is usefull ....
Girish

Display construction type on the structure list within the work order

I have a work order written against an equipment which has a construction type assigned to it. When using the structure list from the components tab of the work order, the construction type does not display under the equipment in the list. If I run the same structure list from transaction IH03, the construction type does display under the equipment. How can I add the construction type to display on the structure list within the work order? We are on release 4.7
Thanks,
Terry Gaskin

Thanks PeteA, we know we can do that, but we are looking to get it consistent with IH03, where the construction type shows without being added to the BOM. The construction type is listed immediately below the equipment in IH03.
Thanks

All DPs read "Failed to retrieve the package list on the distribution point"...

About 2 weeks ago all 10 of my DPs started reporting the following warning (roughly 2 weeks after upgrading to R2):
"Failed to retrieve the package list on the distribution point ["Display=\\<server.FQDN>\"]MSWNET:["SMS_SITE=<code>"]\\<server.FQDN>\. Or the package list in content library doesn't match the one in WMI. Review
smsdpmon.log for more information about this failure.
This warning has appeared in my environment once before and I've read a number of posts regarding it. In the previous situation I found the problematic package ID recorded in smsdpmon.log and followed the standard procedure of redistributing and then proceeded
with a validation check on the affected DP. These steps resolved the issue originally.
This time around the package ID is not referenced in smsdpmon.log. It had the same error but the ID was not listed. Unfortunately the logs have already rolled over and I forgot to save a copy so I don't have anything to reference. I'm curious if anyone else
has seen this behavior and what the recommended fix is.
As always, appreciate the help!

I used the following process to clean up these warnings on my DPs:
Setup content validation checks for each of my affected DPs to run every morning (previously only set to weekends). I did this so when I made a change I could validate whether or not it worked the following day. It would be great if there was a way to force
these checks manually but I haven't found a method yet.
After the content validation check completed I filtered through the smsdpmon.log on each affected DP. This revealed the package ID that was causing the issue.
In my environment the package in question was not needed so I deleted it. If it is required I suspect re-distributing it would work as well.
At this stage the problem was still not fully resolved for me. Even though I had deleted the package WMI was still inaccurate. I used this script to scrub WMI on all affected DPs and it picked up the problematic package ID:
http://gallery.technet.microsoft.com/Powershell-script-to-fix-81dc4e69
My content validation checks are now passing and the warnings are being cleared. YEAH!
As a final note - After running the PS script Nickolaj posted I ran started seeing dozens of error checks on my packages (Distribution Manager failed to process package "Laptop Drivers" (package ID = XYZ00123).) After doing some research
I found I was prone to this issue:
Failed to start DP health monitoring task. In my case the suspect file was called "Microsoft". I moved it to another location and the errors cleared immediately.
Hope this info is helpful to others!

Verisign announced a new CA certificate in October 2010, Verisign Class 3 Secure Server G3. When will this be included in the CA list of the browser? It is in other browsers already (IE, Safari, etc)

Verisign announced a new CA certificate in October 2010, Verisign Class 3 Secure Server G3. When will this be included in the CA list of the browser? It is in other browsers already (IE, Safari, etc), yet in Firefox you're currently prompted with a security warning for a trusted CA.

That is one of the intermediate certificates that VeriSign is using. Intermediate certificates are part of the chain that is formed by the web server certificates and build-in root certificates. Such an intermediate certificate needs to be send by the server and is not included by default in Firefox. Firefox will store such an intermediate certificate for future use when a website sends it.
See https://knowledge.verisign.com/support/ssl-certificates-support/index?page=content&id=AR1130

When I attempt to access my IRA account on line, I get a message saying that the web site requires a client certificate. The certificates listed in the drop down dialog box don't get accepted, even though one is indicated as valid and good until 10/2014.

When I attempt to access my IRA account on line, I get a message saying that the web site requires a client certificate. The certificates listed in the drop down dialog box don't get accepted, even though one is indicated as valid and good until October 2014. I contacted the IRA account managment company and they sais it's an Apple issue. Any ideas?

Some websites require a special client certficate for access. If you don't have that certficate, you'll have to contact the site operator to find out how to get one.
Sometimes the problem is caused by a web server that is configured to request an optional client certificate. Safari treats the request as mandatory. In that case, other browsers such as Firefox and Chrome may be able to connect to the site, because they ignore the request.
The first time you were prompted for a certificate, you may have clicked through a dialog that requested access to the Apple certificate in your keychain that is used to secure the iMessage service. In that case, you may be able to regain access to the site in Safari by doing as follows.
Back up all data.
Double-click anywhere in the line below on this page to select it:
com.apple.idms.appleid.prd
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Paste into the search field in the Keychain Access window by clicking in it and pressing the key combination command-V. An item may appear in the list of keychain items. The Name will begin with string you searched for, and the Kind will be "certificate."
Delete the item by selecting it and pressing the delete key. It will be recreated automatically the next time you launch the Messages or FaceTime application.
The next time you visit a site that prompts for an optional client certificate, cancel out of the prompt. You may have to do this several times before the server stops asking.
Credit for this idea to Christian Braukmueller of SAP.

Is there a way to move the message pane from the bottom of the messages list to the right of it?

The question should be self explanatory. Windows Mail allows the folder pane, the message listing and the message pane to be listing in 3 columns side by side. In Thunderbird the message pane is available only beneathe the message listing. Am I missing something?

I had hit "vertical" earlier before I requested support, and nothing happened. It worked just fine after trying subsequent to your suggestion! Not sure what happened, but thank you for your help.

There is absolutely NO way to drag and drop newly purchased music from the Purchased list on the phone into my iTunes library? I'm finding it hard to believe that something so simple cannot be done!

I like to make MP3 CD's when I have people over, or when my friends have people over so I can just pop them into the CD player and let them play all night without having to worry about changing the CD or anything. Well, Apple's music is in AAC format, so I have to convert the songs to MP3 files using the converter in iTunes. So I'll convert them to MP3's and just delete the AAC file so I don't have doubles. The problem is, the next time I plug the phone into my laptop to transfer new purchases, iTunes thinks that the songs I converted aren't there anymore because the phone has them as AAC files, and iTunes has them as MP3 files, so it doubles the music again...EVERY time!! It's very frustrating! So this is why instead of clicking Transfer Purchases, I would like to be able to just drag and drop the songs I want from the Purchased list on the phone into my iTunes library. I hope I explained this right...lol. Unfortunately, it doesn't seem like I'm able to do that. I'm hoping maybe somebody here can help me out and give me some pointers on what to do about this. Thanks!!

That stinks! I can actually do that at my house...I just plug my iPhone right into the wire that's plugged into my receiver in my living room...but some of my friends aren't "technology savvy"...lol...so they just have DVD players and I'll put the CD in there because it will read an MP3 disc. What's funny, is I have the phone set to "Manually Manage Music", and when I plugged it into the laptop just now, the one song I downloaded last night on the phone, transferred over to the iTunesl library. That NEVER happens. And it only transferred the one song...it didn't double the other songs like it ususally does. I swear, iTunes does what it wants, when it wants sometimes...lol. Thank you for your quick response.

How to select the vendor from the source list in the PO(me21n) screen ??

Hi
How to select the vendor from the source list in the PO(me21n) screen.
Is there any Sources of Supply tab in the PO just like we have in the PR.
I don't want a PO raised from a PR which has got the Vendor assigned to it already.
Or the SAP doesnot provide the option of Source list/Assign source/Sources of Supply .....in the PO.
Kindly reply

There is not any facility available for Source Determination in PO. Only you can select the line item and click Menu Environment > Source List and view the list of sources available for the material but you can not chooss and assign. If you wan to assign the vendor then change the vendor already entered in PO and put the desired vendor.

Text need to be added in the packign list of the output

Similar Messages

Maybe you are looking for