Text not getting displayed in PA40 action.

Hello All,
We upgraded from 4.6 to 5.0. When I doing the hiring or any other action, the text for the action type, reason for action or any other field is not getting displayed. Even when I select the entries the text for that is not getting displayed.
like its displaying only 01- for Action type hiring.
Thank You all in advance for your reponse!
Chakri.

Hello Sharath,
I checked this and this table is having all the values properly maintained. Language, Action, Name of the action is maintained. Is there any place where we need to activate this in order for us to see the name of the action type also when we select an action in PA40.
Thanks a lot for your response.
Chakri.

Similar Messages

Profit center text not getting displayed in report

Hi all
Iam using 0profit_ctr in my query.But in report the text associated with it is not getting displayed.When i see the masterdata the text is displayed properly.
Please let me know how to rectify this.
Thanks
Bhanu

Right click on the master object, and click "Activate Master Data"
Hope this will resolve the issue.
Ishdeep.

Custom field's text not getting displayed in standard report

Hi All,
I have a requirement like this .
There is a Custom field which we have added in a standard FICO report ie S_PL0_86000030 ( G/L Account - Balances ).
The custom field is added through a report painter , while seeing the config of report painter the custom field is showing the selection text , but when we run this transaction S_PL0_86000030 , the technical name of that field appears in the selection screen .
For example if the field is ' matnr' then we give the text as 'Material Number' . Then in the screen this field is getting displayed as Matnr instead of Material Number.
Please suggest me on this.
Thanks,
Sumit

In transaction GRR2
Insert->
selection parameters ->
take the variable type as >Tesxt varaible for selection parameter
chosse >material no.
hope ths helps
Bhanu

Full text not getting displayed while using RSRT

Hi,
I am facing issue while downloading data using RSRT in BI system.
When I go to RSRT and execute a report the output doesn't display full text for a characteristic. i.e. the characteristic has a size of 60 characters, but only 30 chars ( approx) are being displayed as report output in RSRT.
COuld anyone here please help me in getting the full text using RSRT transaction?
I am not using Bex here for the reason that the output has more than 1.8 lac records and hence I get an error while using Bex
WHen I try to execute this report using Bex for a small selection I could see full text there.
And there is no text master data maintained for this characteristic.
Thanks in advance for your replies.

Hi,
As you said you have 1.8 Lac records, There is no point in increasing the size to maximum number possible i.e 65K .
You have following three options to satisfy your requirement.:
1.    Usage of web reporting for export of more than 65k rows. According the note: 1127156 - Safety belt: Result set is too large, in BW version 7.x it I possible to set parameters that would allow such a massive export of data.
2.    Functionality of OpenHubs. Data can be placed directly into the files (e.g. in CSV format) on application server. Be careful here OpenHubs are specially licensed and by using it there are additional fees.
3.    Coding of custom ABAP report which runs BW query and gets all its output and saves it in the flat files.
Please let me know if this info is helpful.
Regards,
Krishna Tangudu

Session Timeout Alert text is not getting displayed on web ui.

Hello,
In "Session Timeout Alert" pop up we are facing one issue. The pop up is getting displayed as per the value in rdisp/plugin_auto_logout parameter i.e. 1800. But the text is not getting displayed.
I have implemented the SAP Note 1877120 also. Any inputs to resolve this issue.
Thanks.

Hi Sigrid,
When we do pre activities related to OTR, need to save it in standard name space only ? could you guide me pls.
in the below we have Alias and package are standard.
1.) There are 4 texts which needs to be configured via SOTR_EDIT to get the translation according your languages implemented in your CRM.
a.) Start doing it by opening transaction SOTR_EDIT.
b.) Change to the language you would like to use.
c.) As ALIAS enter first CRM_IC_CMP_FRAME/SESSION_PING_TITLE. Click on Create and confirm the following dialogues.
d.) Enter CRM_IC_CMP_FRAME as package and the object type as WAPP.
e.) Finally enter the translation according your language from the english version (length of text: 25):
"Session Timeout Alert !"
f.) Save you changes
Repeat the steps a.) to f.) with the following aliases and options:
Jimmi

Header Vendor text is not getting displayed for PO in BBP_PD transaction.

Hi Experts,
We are upgrading SRM 3.0 to SRM 7.0 .In the upgraded sys the Header Text 'HTXT' is not getting displayed for the Purchase order created in BBP_PD. For the SCs the Header text field is populated correctly.
Inputs on this will be very helpful.
Regards,
Ravi.K

Ravi,
Check in IMG if the text schema is used in configuring PO transaction type. Define Transaction Types is the setting.
SG

Dynamic mandatory field error message is not getting displayed in webui

Hi,
In Appointment if the importance is HIGH i made Location as mandatory.For this i enhanced BT126H_APPT/ApptDetails. In the get_p_location() method of BTACTIVITYYH i have written the code.
Now the problem is Error message for this dynamic mandatory field is not getting displayed in webui.
I debugged in DO_FINISH_INPUT error message is getting generated but it is not getting displayed in ui.
Can anybody tell where the problem is?
Thanks,
Hari.

Hi Hari,
Really sorry do not know how to convert this nug file to text
How ever quick solution for your problem would be just keep your validation in 'DO_VALIDATE_INPUT' method of the view controller.
Means even if the User clicks on SAVE , Since it fails here , it would not allow you to go further.
Thanks,
Rajesh P

Default Value is not getting displayed in SUN ONE Ldap

Hello,
I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
The attribute default value is given through SUN ONE Console. But, In our application the default value is not getting displayed.
We need the default value to run our applicatin. Can anyone help me for this issue
Regards,
K. Senthil Kumar

Hi anandkumar,
I belive this issue can be resolved by changing the Query proprties for the perticular field.
Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
__Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
Hope this helps you!!
Best Regards,
Maruthi

Work item not getting displayed in the portal

Hi experts,
We are creating a protoype for one of the standard HCM form for change in working time. When we initiate the process, the workflow is supposed to identify the agent(which is the manager in this case) and push the work item in the inbox of the manager.
In our issue, we are able to see the workitem in SAP inbox, but the same work item is not getting displayed in the portal.
If we try to approve from the SAP inbox, the hard coded message u201CWork item can only be executed using the Portal and the UWLu201D comes. [this comes through the method of one of the tasks 17900101 which we are using for approving the form]
We commented the message by using a Z class. Now we donu2019t get the hardcoded message, but still the workflow does not complete from here.
Can this be aan integration issue of the workflow tasks with the portal??Can someone elaborate on this??

<ItemType name="uwl.task.webflow.TS17900101.SAP_ECC" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchWebDynPro" executionMode="default">
      <ItemTypeCriteria systemId="SAP_ECC" externalType="TS17900101" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
          <Properties>
            <Property name="WebDynproApplication" value="ApproveFormApp"/>
            <Property name="WebDynproDeployableObject" value="sap.com/pa~asr~formstep"/>
            <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
            <Property name="openInNewWindow" value="yes"/>
            <Property name="display_order_priority" value="5"/>
          </Properties>
          <Descriptions default=""/>
        </Action>
      </Actions>
    </ItemType>
You have to say to your portal team to modify their XML file as above. In simple you hvae to configure the task in the portal and in the SWFVISU txn as follows with the following vizualization parameters
Task TS17900101 and visualization type is JavaWebDynpro
APPLICATION     ApproveFormApp
PACKAGE     sap.com/pa~asr~formstep

Data is not getting displayed in my form

hi,
i have declared variable to hold amount in that as v_amt type konv-kwert in my program and in form interface in import parameters i gave it the same as v_amt type konv-kwert..............and in text i gave the variable v_amt.............
but it is not getting displayed................

Hi!
on the application toolbar on the top a icon is there for Field list on/off.
click on it.
below left hand side field names will be displayed.
now from the import parameter drag that parameter and drop it in the text boc where you are to display it.
try this way.....it can work.....sometimes there is problem when u don't drag and drop the fields from the list box in the text nodes.
Regards.

Links not getting displayed in the contextual panel

Hi,
I have created a contextual panel inside a transparent container. And created a method in the same view supply_values of type supply function to supply the values to the panel.Inside the method I have coded like:
DATA TAB TYPE WD_THIS->ELEMENTS_N_VIEW_SWITCH.
DATA LINE TYPE WD_THIS->ELEMENT_N_VIEW_SWITCH.
LINE-TEXT = 'User Manual'. "#EC NOTEXT
LINE-ENABLED = ABAP_TRUE.
APPEND LINE TO TAB.
LINE-TEXT = 'Logout'. "#EC NOTEXT
LINE-ENABLED = ABAP_TRUE.
APPEND LINE TO TAB.
NODE->BIND_TABLE( TAB ).
Also in the context of the view I have created a node and supplied the method 'supply_values' in the supply function.Under the node I have 2 attributes named text and enabled. Text is of string type and enabled is of boolean type. In the properties of the contextual panel I have bound the visible property with the enabled attribute.
Now when I am running this application , links are not getting displayed in the contextual panel. Though when I debug TAB contains the values. Please suggest if I have missed out something or I need to look into the properties of the contextual panel. Any pointers will be really helpful.
Regards,
Ashutosh

Hi,
Can you elaborate ' ItemEnable property of ViewSwitch'.
I have already bound the enable property of the panel with a context attribute of type wdy_boolean but it is still not working.
Regards,
Ashutosh

Header not getting displayed in the next page in the second table

Dear Experts ,
I have a query regarding Header not getting displayed in the next page in the second table of the main window. .Let me elobrate the issue.
I have a smartform in which there are 2 tables TABLE 1 and TABLE 2 in the smartform MAIN window. TABLE 1 is for pending PO and TABLE 2 is for future delivery date P O separated by text in between.
Now the header for both the tables and the data are getting displayed properly if the total output is in only one page. But If there are more entries in the TABLE 1 the Header for the TABLE 2 is not getting displayed. Header for TABLE 1 yet gets displayed properly in the next page in case of more entries.
Only issue is that Header for TABLE 2 is not getting displayed in second page but it gets displayed if the entries are less in TABLE 1 and the total output is in one page .
Please provide a elobrate solution on this problem as the requirement is urgent.
Thanks,
Regards,
Sachin Hada

Hi Sachin,
you need to cteate two pages FIRST and NEXT.
in first page --> FIRST
next --> NEXT
in next page
page---> NEXT
next ---> NEXT.
you copy the first page main window is the same in next page
aslo
I think help ful for you
thanks & Regards
BHUPAL.

Whenever a record is Edited the rows are not getting displayed in the repor

Hi all,
When a new record is added or edited, It is physically getting added or edited according to the process, but those records are not getting displayed in the report..
Please Any body faced this situation...
Help me to identify what error i am doing........
thanks in advance
kavitha L

Hi KChamarti,
I am also trying to display images insid the datagrid but i get a weird broken image(all silver gray).
My item renderer is:
          <mx:DataGridColumn headerText="Type">
               <mx:itemRenderer>
                 <mx:Component>
                  <mx:HBox verticalGap="2">
                      <mx:Image id="dgImage" source="\assets\images\{toLowerCase(data.type)}.jpg" />
                      <mx:Label text="{data.type}"/>
                    </mx:HBox>
                 </mx:Component>
               </mx:itemRenderer>
            </mx:DataGridColumn>
Am i mentioning the source of the image in the right way?

WRITE STATEMENT IS GETTING EXECUTED BUT NOT GETTING DISPLAYED

HII All,
i hv created a selection screen with push button. Now when i m clicking that pushbutton, output is not getting displayed..when i debug program ,control enters in switch case and also executes write statement but write statement is not getting displayed.. below is the code ..
SELECTION-SCREEN BEGIN OF BLOCK INPUT WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN PUSHBUTTON 10(20) TEXT-002 USER-COMMAND FIR.
SELECTION-SCREEN PUSHBUTTON 35(20) TEXT-003 USER-COMMAND SECOND.
SELECTION-SCREEN END OF BLOCK INPUT.
       WA-EMP_NO = 123.
        WA-EMP_CO = 'A'.
        WA-EMP_N = 'APOORV'.
        APPEND WA TO IT_TAB.
AT SELECTION-SCREEN.
CASE SY-UCOMM.
WHEN 'FIR'.
PERFORM SUB1.
WHEN 'SECOND'.
        APPEND LINES OF IT_TAB FROM 2 TO 3 TO IT_TAB1.
        WRITE:/ 'SECOND INTERNAL TABLE CONTENTS'.
        LOOP AT IT_TAB1 INTO WA1.
        WRITE:/15 SY-TABIX, WA1-EMP_NO NO-ZERO, WA1-EMP_CO, WA1-EMP_N.
        ENDLOOP.
ENDCASE.
FORM SUB1.
LOOP AT IT_TAB INTO WA.
          WRITE:/ SY-TABIX, WA-EMP_NO NO-ZERO, WA-EMP_CO, WA-EMP_N.
ENDLOOP.
ENDFORM.
Plz help me..
Edited by: Julius Bussche on Jan 29, 2009 1:40 PM
Code tags added and please dont use Caps-Lock.

HI,
SELECTION-SCREEN BEGIN OF BLOCK INPUT WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN PUSHBUTTON 10(20) TEXT-002 USER-COMMAND FIR.
SELECTION-SCREEN PUSHBUTTON 35(20) TEXT-003 USER-COMMAND SECOND.
SELECTION-SCREEN END OF BLOCK INPUT.
WA-EMP_NO = 123.
WA-EMP_CO = 'A'.
WA-EMP_N = 'APOORV'.
APPEND WA TO IT_TAB.
* AT SELECTION-SCREEN.                 "Comment this
START-OF_SELECTION.                     " Add this
CASE SY-UCOMM.
WHEN 'FIR'.
PERFORM SUB1.
WHEN 'SECOND'.
APPEND LINES OF IT_TAB FROM 2 TO 3 TO IT_TAB1.
WRITE:/ 'SECOND INTERNAL TABLE CONTENTS'.
LOOP AT IT_TAB1 INTO WA1.
WRITE:/15 SY-TABIX, WA1-EMP_NO NO-ZERO, WA1-EMP_CO, WA1-EMP_N.
ENDLOOP.
ENDCASE.
FORM SUB1.
LOOP AT IT_TAB INTO WA.
WRITE:/ SY-TABIX, WA-EMP_NO NO-ZERO, WA-EMP_CO, WA-EMP_N.
ENDLOOP.
ENDFORM.

How come the images are not getting displayed in ie?

Hi,
In my application i have a page where the thumbnails
representing the videos uploaded into the site should be
displayed.These imgaes are getting displayed in mozilla properly,
but when it comes to ie 7 they are not getting displayed..instead
iam getting a broken image.Please suggest me a solution.Thanks in
advance.

Hi KChamarti,
I am also trying to display images insid the datagrid but i get a weird broken image(all silver gray).
My item renderer is:
          <mx:DataGridColumn headerText="Type">
               <mx:itemRenderer>
                 <mx:Component>
                  <mx:HBox verticalGap="2">
                      <mx:Image id="dgImage" source="\assets\images\{toLowerCase(data.type)}.jpg" />
                      <mx:Label text="{data.type}"/>
                    </mx:HBox>
                 </mx:Component>
               </mx:itemRenderer>
            </mx:DataGridColumn>
Am i mentioning the source of the image in the right way?

Text not getting displayed in PA40 action.

Similar Messages

Maybe you are looking for