Text not showing on exported Excel docuemnts

I have several Excel documents that I export to PDF using the Adobe printer, Part of my Adobe Acrobat Pro XI install.
When I do the export to PDF I open up the PDF and see that the entire document is there, unfortunately when I try to print the document from the new PDF certain text does not show up.
I'm confused why it shows up on the screen but not the print out... different text also seems to appear and not appear depending on the printer its printed on.
Thanks

Exporting it made no diff.
It's Arial regular.
I noticed that the sample apps from the book Professional Flash Mobile Development: Creating Android and iPhone Applications aren't showing their text when I install their ipa's either.
So you can make text appear in your apps when creating a textfiled in the IDE? What font are you using?

Similar Messages

  • Document Flags not showing on Web Excel

    We are using BW3.5 SEM4.0.
    Documents are added to cells in planning layouts.
    Documents flags are showing up on web and BEx reports. They are also showing up on non-Excel web planning layouts, and Excel Gui layouts.
    The flags are, however, not showing on Web Excel layouts. Althought the document could still be viewed, if you know which cell they are located in.
    Is there a solution to this? Thanks for reading.
    William

    Hi guys,
    I have a related problem: I set up BPS to handle the documents (and I already tested it, it works fine).
    My 4 characteristics are WBS element, version, fisc per, and material.
    Now, I am just creating a web reports that should also display these documents. What do I have to adjust in the Query designer? Do I have to restrict the report to exactly this combination to see them?
    (I have tried Query properties ->Display ->Display Document links, it shows icons per column, but does not display any BPS document I created)
    any help is appreciated
    thanks,
    martin

  • SSRS Drillthrough Reports functionality not working in exported Excel format

    Hi All,
    Recently I have made a drillthrough report in SSRS 2008R2,Its working fine only in MSBI run mode and preview mode of report designer.Going from main report to sub report and any other report through drillthrough report its work fine.
    When I export these report to excel
    drillthrough is not working,Only showing main report in excel there is no link showing in excel report as showing in preview mode of report
    Please help me out for the same.
    Regards,
    Praveen C
    Regards, Praveen

    Hi Praveen,
    Based on my research, just as AntoonVansina said, drillthrogh links still be supported in SSRS 2008R2 when exporting the report in excel. Drillthrough links that appear in text boxes are rendered as Excel hyperlinks in the cell in which the text is rendered.
    When clicked, the drillthrough link opens the client’s default browser and navigates to the HTML view of the target.
    However, Drillthrough links are not supported in PDF rendering. The drillthrough links are not rendered as clickable links and drillthrough reports cannot connect to the target of the drillthrough.
    So could you please post more details about how did you create the drillthough links, are you use Go To Report or Go To URL?  What’s the expression for Go To URL and did you get some error message when you click the URL in Excel?
    Reference:
    Exporting to Microsoft Excel (Report Builder 3.0 and SSRS)
    Exporting to a PDF File (Report Builder 3.0 and SSRS)
    If there are any other questions, please feel free to ask.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Text not showing in PDF created for print

    After exporting an illustrator document I tred to make a high quality PDF for print but the text does not show in the PDF file.

    Impossible to know. You have not provided any info about your document, what font you used, what appearances on the text, what PDF settings, what system or even what version of AI plus how you review the document. From the font simply not being allowed to be embedded to specific appearances not rendering correctly to unsuitable PDF settings there could be anything at work here. You need to be much more specific.
    Mylenium

  • The sequence does not show when exporting media from premiere

    hi
    i have the following setting for my sequence-
    editing mode- main concept bluray
    time base-25.00
    preview file format -mpeg bd 1080 50i vbr 34 mbps
    width 1920
    height- 1080
    maximum render quality
    issue is when i export media the adobe media encoder does not show the sequence
    and when i export in some other format- it only shows h.264 option and not h.264 bluray. as a consequence cannot write any bluray since all the option are progressive
    do i need to reinstall something/anything
    issue with mainconcept?
    is there a tab where one can add presets in media encoder?
    thanks

    If you installed AME through the Creative Cloud, then this is a known issue which was fixed in an update released just a couple of days ago. To get this update, select Updates in the Help menu.
    If you're not on Creative Cloud, then please specify which product or suite you installed that included AME, and also indicate whether it's activated or running in trial mode.

  • Non-button text not showing up in menu

    Is it normal for text in a Blu-ray menu that is not a button to not show up in the menu once it is on a disc or disc image? This is the last issue I am having.
    I have some text on a menu that is just text. I have had plain text in the past work perfectly, but this time around Encore isn't rendering it. In the past though, my motion menu footage was in compliant m4v format, and this time it's mp4 so that Encore would transcode it. Using m4v was causing red frames to show up in the footage.
    Is there a way for me to fix this easily, either in Encore of Photoshop?

    I feel really slow...
    The only background in a multipage menu is the background in page 0.
    When you add anything to the page 1 or 2 groups, it can only be a button.
    So yes, the workaround to getting text that only shows on a single page is to put it in a button.
    You told us everything we needed in the original post, except, of course, that it was a multipage - but the symptom made that an easy guess. Sorry a little slow on getting there!

  • The file icon is not showing up in excel in the menu bar

    The file command is not showing in the menu bar for excel 2011?

    Have you done Help > Check for Updates from Excel's menu?

  • Bleed not showing in exported PDF

    I'm submitting a postcard design to hotcards.com and am worried because the bleeds that I have are not showing when I create the PDF.
    I've included the crop marks when exporting (and checked 'bleed marks'.) Don't know if I should submit with the crop marks, and I'm not seeing the bleed. My color (bleeds) just end at the margins.
    Any advice?
    http://cellocelli.com/design/CellocelliPostcardBack.pdf
    http://cellocelli.com/design/CellocelliPoscardFront.pdf

    First of all, you need to include the bleeds in your InDesign document; 1/8" is pretty standard for bleed in the US, but check with your printer to be sure. Start by including a bleed in your page layout: Document Setup > More Options > Bleed and Slug. Type .125" for all 4 bleeds (if you check the little chain icon on the right, you'll only have to type it once). This will add a red outline outside your page area to show where the bleed should be. Then you'll have to stretch your backgrounds to snap to the outer bleed lines.
    When you export the PDF, click "Use Document Bleed Settings" (in the Bleed and Slug section of the dialog box). I also change the marks offset to 1/8" to match, just so they're not too close to the page area. That should give you a good PDF for the printer.
    -Bill

  • Header text not showing up in browser

    My h2 text is not showing up in the browser (IE).  Also of concern is the bad formatting that appears when this page is opened in Chrome.  Any thoughts?
    http://moxiespeak.com/
    THANK YOU!

    Your CSS and JS links are all pointing to files on your hard drive.
    e.g.
    <link href="file:///C|/Users/christy/Documents/Moxie Speak 05 23 11/Moxie Speak Branding/Rejects/Final website/Original Template/site/css/reset.css" rel="stylesheet" type="text/css" />
    should read something like
    <link href="css/reset.css" rel="stylesheet" type="text/css" />

  • T42 (Type 2378) Rescue and Recovery text not showing up in GUI

    I have a machine that I hit the IBM button to restore my system back to its factory settings.  It loads up fine but when I hit the [Restore your system] it pulls up a new window and has 3 bullets I can select from, but there is NO text on the window.  Not even the < Back or Next > or Cancel button texts are showing up. I need to restore it but I don't know which bullet to select and if I select a random one, the next screen pulls up but still no text.  Any ideas?

    Thank you! I had to change my fast preview settings. I chose OpenGL Active instead of Wired Frame. Although, I'll have to play around with it because I got an error message last night that said it caused the program to crash.

  • HELP! animated text not showing up in final render (after effects)

    I'm using position and motion blur for my animated text. I changed the font several times to see if there was any license issues and there isn't. I also put a static text layer in the file and then rendered, and THAT text will show up, but moving text refuses to show up. What can be the problem? Please help!

    We need to know a lot more if we're going to help you. Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"
    Note, especially the request for screenshots of the relevant panels, such as the Timeline panel and Composition panel.

  • Multiple Lines of Text not showing up

    Hi,
    Recently we have observed on a particular site in SharePoint farm that whenever we are adding list field of Multiline Text.
    It is not showing up in list forms (New, Display, Edit). Test is Multiple Lines of Text field. This is happening on all the existing as well as new lists.
    I searched for the issue but couldn't find any solution.
    Please guide me on this issue. Appreciate your help.
    Thanks,
    Rahul Babar
    ASP.NET, C# 4.0, Sharepoint 2007/2010, Infopath 2007/2010 Developer http://sharepoint247.wordpress.com/

    Hi Rahul,
    Per my understanding, the Multiple Line of Text column not showing up in all the form pages in one of your site.
    I suggest you do as follows to troubleshoot this issue in your environment:
    1. Is there any update or customization applied to this site recently?
    2. Please inspect the HTLM source code of the Multiple Line of Text field in NewForm page to see if there is corresponding HTML code in the page. In my page, the HTML
    code of the Multiple Line of Text field like this:
    3. If the HTML structure exists, then it is probably a CSS issue, please check if there is custom CSS style applied to this site which would conflict with the built-in
    style of the Multiple Line of Text field.
    Thanks 
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • CD Text not showing up on burned cd's.

    When I burn a cd, the cd text is not showing up even though I have the include dc text option checked. Any suggestions?

    iTunes has an option to burn CD Text, but it does not have the ability to read CD Text. If the CD Text is burned on the CD, then any of the ripping tools listed in this article will be able to read the CD Text.
    If you don't have the time to look at that link here is a summary: almost all ripping tools except iTunes can read CD Text.

  • Incoming texts not showing on Bluetooth system

    My i-phone 5s  incoming messages are only randomly appearing via Bluetooth. Occasionally I receive one which displays in unread messages. When I move from unread to read it remains. Thereafter the text message disappears when I negotiate between unread/read. " No message using this filter " No historical record of any texts remain in the system Is there some incompatibility between Bluetooth and i-phone 5s set-up? My vehicle is a BMW F10. Thanks for help.

    I have now run the latest Bluetooth updates on the info system today. Still the same problems- texts either not appearing or disappearing after being opened up in unread messages but not showing in all texts. Also no sound notification for incoming messages.

  • Titles/text not showing up online

    Just created pages/album with the black background theme.
    the text/titles are NOT showing online.
    what gives? thanks.

    Could it be that the text is black and not showing up against the background. Click and drag the cursor over the page in the browser to see if the text shows up.
    In iWeb go to the Album page where the thumbnails are displayed click on one and do a Select All. Next click on the Font button at the bottom and in the Font pane click on the 3rd button from the left, the one with the green square. There you can set the color you want.
    This demo page has the first picture's text set to the background color so you can see the effect of dragging the cursor over it to see the hidden text.
    OT

Maybe you are looking for

  • Ps CS6 Action problem: New document created with "Preset: Clipboard" is misnamed

    Ps CS6 v13.0.1 OS X 10.6.8 In an Action, File > New with "Preset:  Clipboard" ignores the specified document name and uses one of the following names when the clipboard definitely does hold valid content: 1. The name that was applied by the previous

  • Can iTunes, song files, and library all reside on an external drive?

    I loaded iTunes and also all of my music and audiobook folders onto an external drive. There are no iTunes files or song files on my local drive. However, when I try to populate iTunes by importing the music and audio folders iTunes insists on creati

  • Create Process Order by BAPI (COR6)

    Hi, I am looking for BAPI to create Process Order (Order category = 40), Instead of doing BI to transaction COR6. I try <b>BAPI_PRODORDCONF_CREATE_HDR</b> but with no success, because it works only with Production Order (Order category = 10). I get t

  • Delimeter Between Strings

    I am going to provide a long string as a parameter to a method. This long string consists of a number of Strings (the number is a variable) separated by delimeters; for example, "aa, bbbbb, ccc, ddddddd". This method is supposed to return the length

  • Regarding Report creation in BI

    Hi, I have created new sample schema in BI Reportsitory. It is display in BI Dashboard .But when i try to see result of the report that time i got following error. -------------------- Query Status: Query Failed: [nQSError: 17001] Oracle Error code: