Text not working correctly

Im finding acrobat pro 10 incredibly frustrating and unintuitive. This is whats happening. I have created a pdf to which I need to add a page of text. I choose - add or edit text box in tools. Then the typewriter bar appears so I click on the typewriter and begin typing. Then I click out of the text box but when I go back to begin typing again I cannot. If I click on it again to try and aline cursor where I left off to begin typing again nothing happens. Instead a blue outline goes around the whole thing. I have tried with edit doc text and with edit text box. If I click a few times it will just start a new text box which I do not want. I just want to do a simple word doc . How hard can it be??? perhaps I should go back to using office. Please help, Im desperate to finish this project.

I would highly recommend you do text creation & editing in Word. Acrobat is indeed not designed for this. It does offer tools that do limited adding of text or editing of text, but this is not the purpose of the application.
As a potential fix for your current issue, after entering text with the Typewriter tool you can edit it by clicking Tools (on the right) > Content and go back to the Add or Edit Text box tool. You will see a blue border around your text, when you go to edit, double click somewhere in the middle of the blue box. Double clicking at the beginning or end may inadvertently add a new text area.

Similar Messages

Texting not working correctly

Last week I was working with Customer Service to get texting working on one of my lines, (removed) . In doing so Customer Service added Text Feature to this line for $10 a month. Text feature still does not work and I now want to remove that feature on that line.
Subject was edited for brevity by: Verizon Moderator <<>>

rbrylawski wrote:
Do you by any chance have the Emoji Free app on your iPhone? Other's reported this some time ago and the common thread (and solution) was to get rid of that app. Here's a link you can click on to read that thread: http://discussions.apple.com/thread.jspa?messageID=12296289&#12296289
That isn't the problem. I have the same problem with it typing a B or M sometimes when I double tap the space bar for a period. I have never installed that app and have no reason to.

Closed Caption text not working correctly

I have set Closed Caption up in Premire but when i do a test output embeded into a QT file the first block of text does not show up, the 2nd and 3rd do but not the first.
the first starts on 00:00:00:20.
Any help would be apreciated.

I would highly recommend you do text creation & editing in Word. Acrobat is indeed not designed for this. It does offer tools that do limited adding of text or editing of text, but this is not the purpose of the application.
As a potential fix for your current issue, after entering text with the Typewriter tool you can edit it by clicking Tools (on the right) > Content and go back to the Add or Edit Text box tool. You will see a blue border around your text, when you go to edit, double click somewhere in the middle of the blue box. Double clicking at the beginning or end may inadvertently add a new text area.

IWeb text not working correctly

Whenever I try to put a sentences with a space it has a weird symble appear on my web
for example
Fax: Â Â Â 310-542-**
the Â Â Â is the 3 spaces I put there or tabs. It happens to every sentence.
Thanks for helping me out.

Whenever I try to put a sentences with a space it has
a weird symble appear on my web
for example
Fax: Â Â Â 310-542-**
This probably means your server is forcing the wrong encoding on all browsers. See this note for the fixes:
http://homepage.mac.com/thgewecke/iwebchars.html

Text formatting in Numbers is not working correctly.

In Numbers on Chrome text formatting is not working correctly, it's almost as if a CSS file is not being loaded. To be precise, when I try to make a cell Bold there is no bolding. I am using Arial as a font. This has been an issue on Mac and Windows. Any ideas?

Do you have the same problem with Safari or Firefox?

I have a manual that contains headings and index entries that contain less than and greater than characters, and . The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the C

I have a manual that contains headings and index entries that contain less than and greater than characters, < and >. The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the Contents or the Index of the generated HTML. In the Contents the words are completely missing and in the index entries the '\' characters that are required in the markers remain in the entry but the leading less than symbol and the first character of the word is deleted; hence what should appear as <dataseries> appears as \ataseries\>. I believe this is a FMv12 bug. Has anyone else experienced this? Is the FM team aware and working on a fix. Any suggestions for a workaround?

The Index issue is more complicated since in order to get the < and > into the index requires the entry itself to be escaped. So, in order to index '<x2settings>' you have to key '\<x2settings\>'. Looking at the generated index entry in the .js file we see '<key name=\"\\2settings\\>\">. This is a bit of a mess and produces an index entry of '\2settings\>'. This ought to be '<key name=\"&lt;x2settings&gt;\" >'. I have tested this fix and it works - but the worst of it is that the first character of the index entry has been stripped out. Consequently I cannot fix this with a few global changes - and I have a lot of index entries of this type. I'm looking forward to a response to this since I cannot publish this document in its current state.

HT201365 my text to send messages is now not working correctly after upgrading

Since upgrading last week my text is not working correctly it is very slow does not show the letter being used and takes seconds to be put in

Looking into the Diagnostics and Usage Reports in 'Settings' -> 'General' -> 'About' I see nine different "ExcResource_MobileMail_DATE" reports. Looking at the report I see a SysInfoCrashReport that indicates that the CPU was pegged at over 50% (mostly over 75%) for over 180 seconds using the MobileMail app.
I also see a "MobileMail_DATE" report that indicates that there was an 'Exception raised during monitored invocation of _loadMoreMessagesWithMaxVisibleIndexPath:maximumIndexPathsBySource:, exception: ** -[__NSArrayM objectAtIndex:]: index 4294967295 beyond bounds for empty array"
And finally I see three "stacks+MobileMail-DATE" reports with "Power assertion timeout for 'com.apple.message.fetchMobileSynchronously...' Simply resetting it now." and "Power assertion timeout for 'com.apple.mobilemail.messagebodyloader' Simply resetting it now" reports.
I updated to iOS 7.0.4 and decided to try and delete the account in my Mail settings and recreate it and set it to manual instead of the non-working fetch. Now, when I try to check my mail it still takes up to five minutes to respond, pulling the screen to refresh brings up the spinner for about one second and then disappears and no indications of activity occur until about three minutes later when I see the spinner in the status bar near the clock and then see a notification that it's downloading X of Y messages. At that point, message headers come in very quick and then about a minute later message previews come in. At random times, opening the mail app I get a "Password incorrect" error, even though the password works on other attempts.

** Filtering is not working correctly in ALV (REUSE_ALV_GRID_DISPLAY)

Hi Friends,
We have one Z report that output is displayed in ALV. We are using the standard FM 'REUSE_ALV_GRID_DISPLAY.
We have requirement to remove leading zeros for the field like Material Number (MATNR), Equipment Number (EQUNR) etc. We did the changes by applying the field catalog properties as below.
lw_fieldcat-lzero = space.
lw_fieldcat-no_zero = 'X'.
After this, the MATNR and EQUNR is displayed correctly in the ALV. (Leading zeros are suppressed). But, when we do filter for these fields, in the filter window it displays all the values with leading zeros.
1. We don't understand why it is showing in the Filter widow with all leading zeros. All it shows all the records instead of unique items.
Later on, we removed the above fieldcat coding. Then, we have called the CONVERSION_EXIT routines (in the domain) for the fields to remove leading zeros.
Now, the MATNR and EQUNR is displayed correctly (without leading zeros) in ALV. When we do filter, it is also doing filtering correctly. But, when we do filter which have EQUNR having long values (after zero suppression), it is not working correctly. i.e no items are displayed in the ALV.
Not only for this items. If we filter character columns which have long text, it is not filtering correctly.
2. It is not able to understand why the filtering is not working for long items. But in the standard report, the filtering is working correctly.
We are using SAP ECC 6.0.
Friends, can you clarify the about doubts. It is surprising for me.
Kind regards,
Jegathees P.
Our customer is asked to remove the leading zeros for the numeric field

Hi Clemens Li
I agreed on your point. When we define the Internal table the type for element EQUNR & QUMNR , we are referring the SAP data element for EQUNR, QMNUM field.
Our doubt is even though we refer the standard data element, in the ALV display, it shows with leading zeros and also it creates problems in the filtering and in the filter window all values instead of unique nos.
Hi Abhii
I have given below the fieldcat coding.
Friends, can you kindly clarify the above said problems. Since we use SAP ECC 6.0 any notes or patches apply is required. ( this is the basic functionality in ALV, that is my doubt).
    wls_fieldcat-col_pos   = wpv_pos.
    wls_fieldcat-fieldname = wpv_champ.
    wls_fieldcat-tabname   = wlc_tabname.
wls_fieldcat-seltext_s = wls_fieldcat-seltext_m
    wls_fieldcat-seltext_l = wpv_libelle.
    wls_fieldcat-ddictxt   = 'L'.
    wls_fieldcat-no_out    = wv_no_out.
    APPEND wls_fieldcat TO gt_fieldcat.
Kind regards,
Jegathees P.

Property inspector not working correctly

The property inspector in CS3 is not working correctly. When
I select text or any other object the property inspector does not
change for that object. But when I right mouse click on the
selected object it does. Do I need to change a setting?
Thanks!

Yes, me too. I can't find an answer to this anywhere.
If I right-click or double-click on an item the property
inspector shows it, but if I single click, nothing happens. It's
bad for productivity.

Why is predictive text not working on my iPhone 5s anymore

Why is predictive text not working on my iphone anymore

Actually, I just found the answer to my issue in this thread: The type correct/predict function for mail and text in iOS 8.0.2 was working fine then suddenly disappeared and reverted to the old style. I've checked all settings that seemed appropriate. How do I restore? I actually liked the new version.
Which says "a thin gray bar with a white dash in the middle of it immediately above the keyboard, you can reopen the suggestions by sliding up with one finger on the white dash."
That did it.
I too have noticed a change, it seems with the new IOS update. My Predictive setting is on, but it seems before it would come up more often in predicting words and also give me a few choices. Now, it's not coming up as much and only providing one 'predictive' word which is not always right. This change is not very useful.

Sonata font on MacOS - not working correctly

Hi,
I just downloaded and installed the Sonata Standard OpenType file via FontBook in MacOS 10.9.2. So far the font is not working correctly in either MS Word or Apple Keynote -- I get standard qwerty letters rather than musical notation. Anyone ideas on how to fix/troubleshoot?
Thanks!

Hello RKmark,
Thank you for going through the process of using those custom keyboard layouts. It was my pleasure to work on those some years ago.
There is a reason why the placement of some characters on those custom layouts seems arbitrary: They were intended to replace the experience a user would have when using the same PostScript font, which was directly mapped to the characters available on the keyboard. Of course they could be re-arranged today – but that would mean opening a whole different project; and would probably question some of the semantics within Sonata.
Back to your problem:
I just tested the keyboard layout for Sonata, together with the Sonata OTF in InDesign, and I did not find any problems.
Of course this does not help you. So let me just describe what I did:
I copied the OTF file, to ~/Library/Fonts
I copied SonataStd.keylayout to ~/Library/Keyboard Layouts
Admittedly, in OSX Mavericks it is a bit more complicated to install a custom keyboard layout:
In System Preferences, go to Keyboard and Input Sources.
Click the + button at the bottom left, scroll down the list and select “Others”.
In the list to the right, you will find a “SonataStd” keyboard layout, it has a grey icon. Click Add.
After adding this layout, you will be taken back on the Input Sources screen. Check the box next to Show Input in menu in menu bar if it is not yet active.
Back in InDesign, create a new text box, select SonataStd, and choose the SonataStd keyboard layout from the menu bar (marked by the flag of the country representing your keyboard).
Now you can begin typing. I could type the sixteenth-note-rest on a US keyboard with alt-x.
However, one thing I have observed:
If you have set any custom keyboard shortcuts in InDesign that are using the alt-key; they might get in the way of typing some of the symbols.
Which of the available symbols in Sonata are you missing in the custom keyboard layout? I tested them all, and could type everything.
What sometimes happens is that the keyboard layout will switch back to default (US in my case), which then looks like the Sonata keyboard layout is not working.
My personal opinion on this: The keyboard layouts are a nice idea for making glyphs accessible to users that don’t have a glyph palette, but they can be very confusing. They will interfere with the normal usage of the application and OS, since standard keyboard shortcuts will no longer work – simply because they rely on the standard keyboard layout of your system.
Personally, I would use the glyph palette in most cases, simply because switching keyboard layouts back and fort would get to tedious for me.
I hope this helps, let me know if you have any further questions.

Sorting not working correctly for date field in alv report

Hi All,
My report displays many rows also containing date type fields of bldat,budat .
When I sort the report selecting field of type bldat budat the sorting is not correct for the year.
Ex:
Invoice doc dat
01-25-2011
01-21-2011
02-02-2011
10-25-2010
11-20-2010
If I use ascending then it is sorted as :
Invoice doc dat
01-21-2011
01-25-2011
02-02-2011
10-20-2010
10-25-2010
Why the sorting is not working correct for year.(2010 records should have been first).
The field wa_tab-bldat is of type char10.
It is populated as wa_tab-bldat = bsak-bldat.
Kindly suggest what can be done.

The field wa_tab-bldat is of type char10
Then what it does is correct.
Refer to type datum...it will work

If statement within a view is not working correctly ?

Hi all,
maybe i am wrong but i think the if statement within a view is not working correctly. See code down below.
I would like to use the Hallo World depending on the page attribute isFrame with or without all the neccessary html tags. Therefore i have embedded the htmlb tags in an if statement. But for any reason if isframe is initial it isn't working. It would be great if anybody could help me.
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if not isframe is initial. %>
<htmlb:content design="design2003">
     <htmlb:page title = "Top Level Navigation view">
<% endif. %>
hallo world
<% if not isframe is initial. %>
     </htmlb:page>
</htmlb:content>
<% endif. %>
thanks in advance and best regards
Matthias Hlubek

Matthias,
The short answer: your example is <b>NOT</b> going to work. The long answer will probably 5 pages to describe. So first let me rewrite the example so that it could work, and then give a short version of the long answer. Do not be disappointed if it is not totally clear. It is rather complicated. (See the nice form of IF statements that are possible since 620.)
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if isframe is <b>NOT</b> initial. %>
<htmlb:content design="design2003">
<htmlb:page title = "Top Level Navigation view">
    hallo world
</htmlb:page>
</htmlb:content>
<% else. %>
hallo world
<% endif. %>
So why does your example not work? Let us start with a simple tag:
<htmlb:page title = "Top Level Navigation view">
</htmlb:page>
Now, for each tag, we have effectively the opening part (<htmlb:page>), an optional body, and then the closing part (</htmlb:page>). We are now at the level of the BSP runtime processing one tag. What the runtime does not know, is whether the tag wants to process its body or not. Each tag can decide dynamically at runtime whether the body should be processed. So the BSP compiler generates the following code:
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
ENDIF.
tag->DO_AT_END( ).
You should actually just debug your BSP code at ABAP level, and then you will immediately see all of this. Now, let us mix in your example with our code generation. First you simplified example:
<% if isframe is NOT initial. %>
<htmlb:page title = "Top Level Navigation view">
<% endif. %>
<% if isframe is NOT initial. %>
</htmlb:page>
<% endif. %>
And then with our generated code. Look specifically at how the IF/ENDIF blocks suddenly match!
if isframe is NOT initial.
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
endif.
if isframe is NOT initial.
ENDIF.
tag->DO_AT_END( ).
endif.
You can see that your ENDIF statements are closing IF blocks generated by the BSP compiler. Such a nesting will not work. This is a very short form of the problem, there are a number of variations, and different types of the same problem.
The only way to solve this problem, is probably to put the body into a page fragment and include it like I did above with the duplicate HelloWorld strings. But this duplicates source code. Better is to put body onto a view, that can be processed as required.
brian

Key Figure calculation in Abap is not working correctly - Overlooping

Hi,
I wrote a logic to calculate the ratio of key figure but it is not working correctly
For example I have a requirement to split 1 Product into Several new Products and also the Net Amount will be splitted to these several new products as well. The total Amount of the new product will be equivalent to the Net Amount.
So far my Logic is splitting the product to several new products but the amount is incorrect as the calculation is over looping.
Sample
A PRODUCT has Net Amount 1000. And this product needs to be splitted into 3 new products. Each of this new product is assigned a ratio of 0.3, 0.2 and 0.7 respectively. total sum of the ratio is 1.
PRODUCT1 0.3 = 1000 * 0.3 = 300
PRODUCT2 0.2 = 1000 * 0.2 = 200
PRODUCT3 0.7 = 1000 * 0.7 = 700
The total amount of this new products is 1000.
Now my logic is working this way.
PRODUCT1 0.3 = 1000 * 0.3 = 300
PRODUCT2 0.2 = 1000 * 0.2 * 0.3 = 60
PRODUCT3 0.7 = 1000 * 0.2 * 0.3 * 0.7 = 42
Only the PRODUCT1 is working correctly and there is overlooping for the remaining products
Logic used
DATA: t_data TYPE data_package_structure OCCURS 0 WITH HEADER LINE.
DATA: t_newdso LIKE /bic/newdso OCCURS 0 WITH HEADER LINE.
DATA: t_olddso LIKE /bic/olddso OCCURS 0 WITH HEADER LINE.
DATA: amount LIKE data_package-netamount.
DATA: zidx LIKE sy-tabix.
REFRESH t_data.
LOOP AT data_package.
zidx = sy-tabix.
MOVE-CORRESPONDING data_package TO t_data.
REFRESH t_newdso.
SELECT * FROM newdso INTO TABLE t_newdso WHERE prod =
data_package-prod.
SORT t_newdso BY prod.
*LOOP AT T_NEWDSO.
READ TABLE t_newdso WITH KEY prodh4 = t_data-prod.
IF sy-subrc EQ 0.
    LOOP AT t_newdso.
      t_data-prod = t_newdso-/bic/znew_mp.
      t_data-material = t_newdso-material.
*T_DATA-NETAMOUNT = T_DATA NETAMOUNT * T_NEWDSO-/BIC/ZSP_RATIO.*
      APPEND t_data.
    ENDLOOP.
ELSE.
    REFRESH t_olddso.
    SELECT * FROM olddso INTO TABLE t_olddso WHERE prod =
    data_package-prod.
    SORT t_olddso BY prod.
    READ TABLE t_olddso WITH KEY prodh4 = t_data-prod.
    t_data-prod = t_olddso-prod.
    t_data-material = t_olddso-material.
    APPEND t_data.
ENDIF.
MODIFY data_package INDEX zidx.
ENDLOOP.
REFRESH data_package.
data_package[] = t_data[].
thanks
Edited by: Matt on Sep 27, 2010 2:25 PM - added tags

Hi,
I am not really good at debugging Abap code since I am a newbie. however I have tried to add CLEAR T_DATA before the first loop.
REFRESH T_DATA.
LOOP AT DATA_PACKAGE.
ZIDX = SY-TABIX.
MOVE-CORRESPONDING DATA_PACKAGE TO T_DATA.
and before the second loop and select statement and at the end of the loop.
REFRESH T_NEWDSO.
SELECT * FROM NEWDSO INTO table T_NEWDSO WHERE PROD =
DATA_PACKAGE-PROD.
SORT T_NEWDSO BY PROD.
READ TABLE T_NEWDSO WITH KEY PROD = T_DATA-PROD.
IF sy-subrc EQ 0.
LOOP AT T_NEWDSO.
but then not all data are being fetched.
thanks
Edited by: Bhat Vaidya on Sep 28, 2010 8:33 AM

Email pushing not working correctly for office email - 3 seperate devices/carriers

We switched email hosts several months ago and since our email pushing has not worked correctly. Our host/IT guy has been very unwilling to help me through this (I get the pleasure of being the in-house IT source)
I personally am on AT&T have no problems with the other 3 emails I have set up on my blackberry. However I receive my work account one time a day at roughly 6:15. Another user is on Alltel and he receives spotty emails throughout the day, but his gmail account comes through instantly. The third user is on nextel and he receives his 2-3 times per day.
I began to think this was an email host issue since the three of us are all on different carriers, until I found out a fourth user, also on nextel, receives his emails fine.
Users 1-3 are on Outlook 07 on various versions of the Curve. We have all our messages to stay on the server.
User 4 is on the older nextel blackberry push to talk, and is not on outlook.
We do not have an exchange server. Our emails were all set up through our devices.
Any suggestions? The answers I have received through our carriers is to make sure that our messages are set to be left on the server. Everyone else at the office has given up - but for me this is the quest for the Holy Grail.......I'm determined find the answer!
Thank you in advance for any suggestions.
Caitlin Talbot

Potential solution for windows for a side-by-side install. This works for me.
To setup a firefox install side by side so that links from external programs (like email) can open (so you don't get a "Firefox is already running but is not responding" message) do the following.
The solution entails the use of the -no-remote switch. Don't use it for the default browser. Use it for the non default browser.
I'll use firefox 3.6 and firefox 4.0 as examples but this should work for future versions.
+ Install firefox 3.6 and Firefox 4.0 in different directories. Eg.
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Mozilla Firefox 4\firefox.exe
+ Open profile manager. Start > Run : firefox.exe -ProfileManager
+ In profile manager create Two Profiles.
firefox3.6
firefox4
+ In profile manager select firefox 4 as your default (assuming you want to default to the latest) and tick "Don't ask at startup"
+ Create two windows shortcuts.
* General: Mozilla Firefox 4 (default). Shortcut > Target: "C:\Program Files\Mozilla Firefox 4\firefox.exe". Shortcut > Start In: "C:\Program Files\Mozilla Firefox 4"
* General: Mozilla Firefox 3.6. Shortcut > Target: "C:\Program Files\Mozilla Firefox\firefox.exe" -p firefox3.6 -no-remote. Shortcut > Start In: "C:\Program Files\Mozilla Firefox"
That's it. Links from external programs should now open in your default browser.
Further details see. [http://kb.mozillazine.org/Opening_a_new_instance_of_your_Mozilla_application_with_another_profile Opening a new instance of your Mozilla application with another profile]

Text not working correctly

Similar Messages

Maybe you are looking for