Text Object Error in Adobe forms

Hello Friends,
I am trying to include a text object in Adobe PDF-based print form.
In the context, I have created a node for the text. I chose the Text Type as Include Text. I am able to choose the required Text Object and Text ID from the respective search helps. When trying to activate the form, I am getting an error saying that I did not specify a text name. I tried to rectify this error but could not do so.
Please help me out on how to rectify this error.
Points will be rewarded for useful answers.
Thanks,
John.

Are you giving the text name in single quotes.

Similar Messages

How to use the separate symbol in the text field in the adobe form.

Hi,experts,
I dont know how to use the separate symbol to make a paragraph separate into several lines correctly in the text field in the adobe form.
Action:
1. config the ADS successfully.
2. create the adobe form with a mult-line textfield(binding the 'remark' context in the interface of the form) using sfp.
3. create a WDA for invoke the form and transfer the 'remark' context data.
I use the following codes to display the paragraph in the PDF document:
CONCATENATE
'1、aaaaaaaaaaa；'
'2、bbbbbbbbb '
'3、ccccccccccc'
'4、ddddddddd'
INTO remark .
lo_nd_z_hr_php_payslip->set_attribute(
EXPORTING
name = `REMARK`
value = remark ).
But I found all the content aren't paragraph separate correctly in the text field in the adobe form when I run the WDA.
Could you please give me some hints to make the paragraph separate correctly in PDF document? Thanks a lot in advance!
My email is : [email protected]
Best regards,
Tao
Edited by: wang tao on Apr 8, 2008 1:58 AM

Hi,
If it is just a one word value then you could use this in the exist event;
this.rawValue
= util.printx(">?<*",this.rawValue);
This changes the first character (represented by the ?) to uppercase (represented by the >) and all trailing characters (represented by the *) to lowercase (represented by the <).
If you wanted something more general ... if they could also enter a middle name then you could call a function like;
function toTitleCase(textValue)
return textValue.toLowerCase().replace(/\b[a-z]/g, function replacer(match) { return match.toUpperCase(); });
This uses a regex to change all lowercase letters following a word boundary to uppercase.
Bruce

Text Object Error in Pdf based print forms

Hello Friends,
I am trying to include a text object in Adobe PDF-based print form.
In the context, I have created a node for the text. I chose the Text Type as Include Text. I am able to choose the required Text Object and Text ID from the respective search helps. When trying to activate the form, I am getting an error saying that I did not specify a text name. I tried to rectify this error but could not do so.
Please help me out on how to rectify this error.
Points will be rewarded for useful answers.
Thanks,
John.

There is no need of activation for standard text... save will do...
Also note: standard text is client dependent... you need to attach to your transport request manually to move between clients...
Close the thread once your question is answered.
Regards,
Sairam

Error in Adobe form based in a xml interface when changing data element

The adobe form is called from a web dynpro.
The adobe form contain a page and subforms (positioned y flowered).
The form worked out perfectally.
Then edited a descriptive text in a data element, from se11. The form continues worked out correctelly.
Then modify a fixed text from the form. The form is activated.
Since this modification, the form stopped to work out, informing the following message:
"WebDynpro Exception: The ADS call has failed. You can find information about the cause in the error.pdf on the application server".
I have updated the nodes of the web dynpro, the xml interface of the form, is all activated and this is still not working.
Someone could help me? Does anyone know what it could be happened?
Is there a way to re-generate the form?
Thanks you very much.
Regards,

The data element is char 4. I have only changed descriptive texts.
I have take take all the objects to the previous version (data element, wd view, interface xml, adobe form), and the form is still not working.
Do you have another posible solution for this?
Thanks you for your answer.
Kind regards,

Getting Error in Adobe Form as Script failed (language is formcalc:context

Hi Experts,
While acessing Adobe forms from MSS ,
After Selecting the Scenario
After Edit Form
Before the form is Displayed
I am getting a POP-UP message stating the following Error.
Script failed (language is formcalc;context is xfa[0].data[0].RequestSeparationEnhanced[0]. PCR_PAGE1[0].PCRheader[0].EmployeeDataCI[0].EmployeeDataCIContent[0].EmployeeInfo[0])
Script=concat($record.ENAME.DATA.FIELD,u201D(u201C,$record.PERNR.DATA.FIELD,u201D)u201D)
Error: acessor u2018$record.ENAME.DATA.FIELDu2019is unknown.
Script failed (language is formcalc;context is xfa[0].data[0].RequestSeparationEnhanced[0].PCR_PAGE1[0].PCR_DE[0].PCRDEContent[0].RequestSeparationEnhanceDDLOverlay[0])
Script=concat($record.MGTXT.DATA.FIELD,u201D(u201C,$record.MASSG.DATA.FIELD,u201D)u201D)
Error: acessor u2018$record.MGTXT.DATA.FIELDu2019is unknown.
ENAME & MGTXT are the fields which has to be displayed by default when the form is shown.
But when the Adobe form is displayed it comes without any Value for ENAME - Employee Name
MGTXT - Reason for Action Text .
Please provide me solution to over come this problem.
Thanking you in advance,
Suriya.

This was fixed by commenting the script in the form since I don't require it.
Suriya

Error in adobe form

Hi
While calling a adobe form i got an error in my report
Runtime Errors         CALL_FUNCTION_PARM_MISSING
Except.                CX_SY_DYN_CALL_PARAM_MISSING
Date and Time          14.12.2007 14:05:35
Short text
     Incorrect parameter with CALL FUNCTION.
What happened?
     When calling a function module, one of the parmaeters was not
     specified.
     Error in the ABAP Application Program
     The current ABAP program "!ADOBE" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_DYN_CALL_PARAM_MISSING', was
      not caught and
     therefore caused a runtime error.
     The reason for the exception is:
     When calling the function module "/1BCDWB/SM00000081", one of the parameters
     needed according to the interface description was not specified.
     This parameter was "BOOKINGS".
Missing Handling of System Exception
    Program                                 !ADOBE
Trigger Location of Exception
    Program                                 !ADOBE
    Include                                 !ADOBE
    Row                                     50
    Module Name                             START-OF-SELECTION
<b> and this is my program</b>
*& Report ZADOBE
REPORT ZADOBE.
DATA : is_customer TYPE scustom.
DATA : it_bookings TYPE ty_bookings.
DATA : iv_image_url TYPE string.
DATA : iv_sending_country TYPE adrc-country.
DATA : it_sums TYPE TABLE OF flprice_t.
DATA : docparams TYPE sfpdocparams.
DATA : formoutput TYPE fpformoutput.
DATA : outputparams TYPE sfpoutputparams.
DATA: FM_NAME TYPE RS38L_FNAM.
PARAMETERS : pa_cusid TYPE scustom-id.
SELECT SINGLE * FROM scustom INTO is_customer
WHERE id = pa_cusid.
SELECT * FROM sbook
INTO CORRESPONDING FIELDS OF TABLE it_bookings
WHERE customid = pa_cusid.
outputparams-nodialog = 'X'.
outputparams-getpdf = 'X'.
*outputparams-adstrlevel = '02'.
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
ie_outputparams = outputparams
EXCEPTIONS
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
docparams-langu = 'E'.
docparams-country = 'US'.
docparams-fillable = 'X'.
CALL FUNCTION '/1BCDWB/SM00000081'
EXPORTING
/1bcdwb/docparams = docparams
is_customer = is_customer
it_bookings = it_bookings
* IV_IMAGE_URL =
iv_sending_country = 'US'
* IT_SUMS =
IMPORTING
/1bcdwb/formoutput = formoutput
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4
IF sy-subrc <> 0.
*MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
*WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'FP_JOB_CLOSE'
* IMPORTING
* E_RESULT =
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
<b>My adobe form is a copy of standard adobe form FP_EXAMPLE_01</b>
Regards
Nanda

Hi Mathew
Thanks for your reply. I had already made some changes in my coding you can check that below
*& Report ZADOBE
REPORT ZADOBE.
DATA : is_customer TYPE scustom.
DATA : it_bookings TYPE ty_bookings.
DATA : IT_CONNECTIONS TYPE TY_CONNECTIONS.
DATA : iv_image_url TYPE string.
DATA : iv_sending_country TYPE adrc-country.
DATA : it_sums TYPE TABLE OF flprice_t.
DATA : docparams TYPE sfpdocparams.
DATA : formoutput TYPE fpformoutput.
DATA : outputparams TYPE sfpoutputparams.
DATA: FM_NAME TYPE RS38L_FNAM.
PARAMETERS : pa_cusid TYPE scustom-id.
SELECT SINGLE * FROM scustom INTO is_customer
WHERE id = pa_cusid.
SELECT * FROM sbook
INTO CORRESPONDING FIELDS OF TABLE it_bookings
WHERE customid = pa_cusid.
outputparams-nodialog = 'X'.
outputparams-getpdf = 'X'.
*outputparams-adstrlevel = '02'.
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
ie_outputparams = outputparams
EXCEPTIONS
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
docparams-langu = 'E'.
docparams-country = 'US'.
docparams-fillable = 'X'.
CALL FUNCTION '/1BCDWB/SM00000080'
EXPORTING
/1bcdwb/docparams = docparams
customer = is_customer
bookings = it_bookings
CONNECTIONS = IT_CONNECTIONS
* IV_IMAGE_URL =
iv_sending_country = 'US'
* IT_SUMS =
IMPORTING
/1bcdwb/formoutput = formoutput
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4
IF sy-subrc <> 0.
*MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
*WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'FP_JOB_CLOSE'
* IMPORTING
* E_RESULT =
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
<b>Now its going to short dump saying that</b>
Short text
    Function parameter "IV_SENDING_COUNTRY" is unknown.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "ZADOBE" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    Function module "/1BCDWB/SM00000080" was called
    with the parameter "IV_SENDING_COUNTRY".
    This parameter is not defined.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYN_CALL_PARAM_NOT_FOUND', was
     not caught and
    therefore caused a runtime error.
    The reason for the exception is:
    Function module "/1BCDWB/SM00000080" was called
    with the parameter "IV_SENDING_COUNTRY".
    This parameter is not defined.
Regards
Nanda

Runtime error in Adobe forms

Hi,
I am getting a run time error when i create ADOBE form and try to save. I am using SAP GUI 7.10 and ADOBE livecycle version 7.1. I did tried with ADOBE livecycle version 8.0 and getting same problem.
NOTE: This is the first ADOBE form i am trying to create in company.
Below are the dump details ...Please let me know if any of you have faced similar problem....Thanks
Short text
    The current application triggered a termination with a short dump.
What happened?
    The current application program detected a situation which really
    should not occur. Therefore, a termination with a short dump was
    triggered on purpose by the key word MESSAGE (type X).
Error analysis
    Short text of error message:
    Control Framework : Error processing control
    Long text of error message:
     Diagnosis
         An error occurred when the system tried to process the commands
         from the Automation Queue on the presentation server.
         There are several possible reasons for this:
         - The installation of the SAP GUI on the presentation server is
         faulty or obsolete.
         - There is an error in the application program
         - There is an error in the SAPGUI or an integrated control
     Procedure
         1. Make sure that you have imported the appropriate Support
         Package, the current kernel, and GUI patch for the release of your
         system
         2. Check whether the error occurs locally on one or a few PCs, or
         generally on all PCs. Note whether the error only occurs for some
         users, for example because of a specific Customizing setting.
         If it only occurs locally, this suggests an installation problem
         with the PC. Check the installation; if necessary, reinstall the
         software. In the dump, search for the SY-MSGLI field, since it may
         point to the cause of the error.
         3. Activate the Automation Trace (in accordance with SAP Note
         158985).
         4.Start the transaction and continue until the screen immediately
         before the dump.
         5. From the System -> Utilities menu, choose Autom. Queue,
         Synchronous Processing.
         The status bar of the GUI displays the text:
            "Automation synchron flush mode on"
         6. If you now proceed with the application, the short dump will
         display the ABAP call that caused the error; the Automation Trace
         will contain the error on the presentation server.
         7. If necessary, load the short dump and trace files on to
         sapservX, so that SAP can analyze them.
    Technical information about the message:
    Message class....... "CNDP"
    Number.............. 006
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
Trigger Location of Runtime Error
    Program                                 SAPLOLEA
    Include                                 LOLEAU02
    Row                                     29
    Module type                             (FUNCTION)
    Module Name                             AC_SYSTEM_FLUSH
Source Code Extract
Line SourceCde
    1 FUNCTION AC_SYSTEM_FLUSH .
    2 *"----
    3 ""Lokale Schnittstelle:
    4 *" IMPORTING
    5 *"     VALUE(CALLED_BY_SYSTEM) TYPE C OPTIONAL
    6 *" EXCEPTIONS
    7 *"      CNTL_SYSTEM_ERROR
    8 *"      CNTL_ERROR
    9 *"----
   10   data: sysubrc like sy-subrc.
   11
   12   CALL FUNCTION 'AC_FLUSH_CALL'
   13        EXPORTING
   14             SYSTEM_FLUSH = 'X'
   15             CALLED_BY_SYSTEM = CALLED_BY_SYSTEM
   16        IMPORTING
   17             MESSAGE_NR   = sysubrc
   18             MESSAGE_TEXT = SY-MSGLI.
   19
20   sy-subrc = sysubrc.
21
22   CASE SY-SUBRC.
23     WHEN 0.
24     WHEN 1.
25 *     system_error
26       MESSAGE ID 'CNDP' TYPE 'X' NUMBER 007 RAISING CNTL_SYSTEM_ERROR.
27     WHEN 2.
28 *     method_call_error
>>       MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
30     WHEN 3.
31 *     property_set_error
32       MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
33     WHEN 4.
34 *     property_get_error
35       MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
36     WHEN OTHERS.
37       RAISE CNTL_ERROR.
38   ENDCASE.
39
40 ENDFUNCTION.

Hi Chandra,
you can try following.
Before saving PDF form, put external breakpoint in FM
AC_FLUSH_CALL_INTERNAL.
Save PDF Form, i guess it should go to this FM. Check which exception is setting sy-subrc = 2.
(There are different checks in this FM for checking ActiveX, javabeen support etc).
Hope this will help.
Although, I never encountered the error you mentioned
Regards,
Mohaiyuddin

Incomplete text displayed in interactive ADOBE form

Hi Guys,
I have an interactive adobe form where a drop down will display "EQUIPMENT NO" W.R.T to the selection screen i/p
uporn selection of the "equipment number" the "EQUIPMENT NAME"field automatically populates.
I used to get an error message "Entry is too long",
got rid of it by setting the value of TYPE property of attribue to "MAXLENGTH" , uporn doing this the drop down and the discription text is displaying only last 3 char of the values.
I tried increasing the size/characters of the fields in the table in the form but was of no use. Any inputs will be Appreciated

Yes I have checked all the subforms Flowed. Text field is working good in Preview Pdf Option of NWDS.
But when I generate the pdf on server, when TextField flows to next page, on next page it repeats from first line.

Error opening Adobe Form - "Processing exception during a "Render" operatio

Hello All
I am getting the following error while debugging the adobe form.
Processing exception during a "Render" operation.#Request start time: Tue Jan 04
07:11:02 GMT 2011#com.adobe.ProcessingException: com.adobe.ProcessingException:
##Specific error information:#a file-system error has occurred (^0)#INTERNAL ER
ROR! Badly formed SStringKey found in StringKey::GetKey().###Exception Stack Tra
ce:#com.adobe.ProcessingException: com.adobe.ProcessingException: ##Specific err
or information:#a file-system error has occurred (^0)#INTERNAL ERROR! Badly form
ed SStringKey found in StringKey::GetKey().###at com.adobe.ads.request.ADSReques
t.processOperations(Unknown Source)##at com.adobe.ads.request.ADSRequest.process
The error in the portal is displayed as
The following error text was processed in the system DE1 : WebDynpro Exception: ADS call failed ADS: com.adobe.ProcessingException: com.adobe.ProcessingException:(200,101).
The error occurred on the application server de1cen00_DE1_00 and in the work process 7 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: CREATE_PDF_DDIC of program CL_WD_ADOBE_SERVICES==========CP
Method: CREATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/CADOBE==================CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/CADOBE==================CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
The form was working fine till we made some small changes in the form.
Please let me know if anyone faced similar problem before. Appreciate if you provide me any leads regarding this error.
Thank you.
Ranganath

Hi ,
I am getting following error while try to generate file .I try all teh option given in the post above but still same issue is there.
com.sap.tc.adobe.pdfobject.base.core.PDFObjectRuntimeException: Processing exception during a "Render" operation. Request start time: Thu Sep 04 01:26:28 CDT 2014 com.adobe.ProcessingException: com.adobe.ads.security.IllegalFileAccessException: <Template><Name> error: access to /usr/sap/MKD/J06/j2ee/cluster/apps/alu.com/alsr~sln~form~creation/servlet_jsp/webdynpro/resources/alu.com/alsr~sln~form~creation/root/Components/com.alu.alsr.sln.form.creation.wd.comp.slnsupplilerformtemplatecomp.SLNSupplierFormTemplateComp/SLNSupplierFormTemplateCompView_InteractiveForm_fr.xdp is not allowed Exception Stack Trace: com.adobe.ProcessingException: com.adobe.ads.security.IllegalFileAccessException: <Template><Name> error: access to /usr/sap/MKD/J06/j2ee/cluster/apps/alu.com/alsr~sln~form~creation/servlet_jsp/webdynpro/resources/alu.com/alsr~sln~form~creation/root/Components/com.alu.alsr.sln.form.creation.wd.comp.slnsupplilerformtemplatecomp.SLNSupplierFormTemplateComp/SLNSupplierFormTemplateCompView_InteractiveForm_fr.xdp is not allowed at com.adobe.ads.request.ADSRequest.processOperations(Unknown Source) at com.adobe.ads.request.ADSRequest.process(Unknown Source) at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source) at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:47) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:74) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:39) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:23) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:191) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:23) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sap.engine.services.ejb3.util.BeanMethods.executeReflectMethod(BeanMethods.java:314) at com.sap.engine.services.ejb3.jacc.ExecuteMethodPrivilegedAction.run(ExecuteMethodPrivilegedAction.java:38) at java.security.AccessController.doPrivileged(Native Method) at javax.security.auth.Subject.doAs(Subject.java:394) at com.sap.engine.services.ejb3.jacc.ContainerJ2EESecurityProviderBaseImpl.doAs(ContainerJ2EESecurityProviderBaseImpl.java:262)

ISR service error :No Adobe Form Is Assigned to the Scenario...

Hi Gurus,
I am getting this error when I try to run any of the ISR based scenarios like Code of Conduct service, PCR etc..
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: No Adobe Form Is Assigned to the Scenario
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
     at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.raiseExceptions(FcISRProcessEvent.java:1948)
     at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callRFCIsrGetFormUrl(FcISRProcessEvent.java:1042)
     at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.setTemplateSource(FcISRProcessEvent.java:459)
     at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callRFCIsrProcessEvent(FcISRProcessEvent.java:798)
     at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callIsrProcessEvent(FcISRProcessEvent.java:380)
     at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEvent.callIsrProcessEvent(InternalFcISRProcessEvent.java:1234)
     at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEventInterface.callIsrProcessEvent(FcISRProcessEventInterface.java:127)
     at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEventInterface.callIsrProcessEvent(InternalFcISRProcessEventInterface.java:409)
     at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEventInterface$External.callIsrProcessEvent(InternalFcISRProcessEventInterface.java:577)
     at com.sap.pcui_gp.isr.isrprocessevent.showform.VcISRShowForm.onBeforeOutput(VcISRShowForm.java:215)
     at com.sap.pcui_gp.isr.isrprocessevent.showform.wdp.InternalVcISRShowForm.onBeforeOutput(InternalVcISRShowForm.java:435)
     at com.sap.pcui_gp.isr.isrprocessevent.showform.VcISRShowFormInterface.onBeforeOutput(VcISRShowFormInterface.java:137)
     at com.sap.pcui_gp.isr.isrprocessevent.showform.wdp.InternalVcISRShowFormInterface.onBeforeOutput(InternalVcISRShowFormInterface.java:136)
     at com.sap.pcui_gp.isr.isrprocessevent.showform.wdp.InternalVcISRShowFormInterface$External.onBeforeOutput(InternalVcISRShowFormInterface.java:212)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.callOnBeforeOutput(FPMComponent.java:602)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:568)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:437)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:195)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
Pls do let me know how to solve this problem.
I tried the configuration checks in the manuals..
The Webservice check returned the correct version of the Adobe version running..
But the program test FP_PDF_test_00 retuen an SOAP error..
I have maintained detinations in the java visual admin
with url : http://abapserverhostname:8000
and user as ADS_AGENT password as in abap system.
Pls tell me how should I solve my problem.
helpfull answers will be greatly awarded...
Regards,
Ramesh

Hi Raja,
the basis have solved the problem and the configuration checks for ADS are succesful now.
Now i try to create change the code of conduct application iview change the name space to
sap.com/pcgui~isr(dont mind the spelling i have given the right component)
application name= IsrForm
application parmetrs = (given according to older thread messages)
but nothing is coming up. I get the Ie message saying
Security settings does not allow page to be displayed correctly and only a "cross" icon is appearing at the top of the page..
Pls tell me what should i do now..
Regards,
ramesh

How can I embed a text field inside a text object in a fillable form?

I am a new user of LiveCycle and am slowly figuring things out. I don't really understand any of the scripts-- thatlevel is way beyod me. I am hoping that someone can tell me an easy way to insert a fillable text field into a text object. I have been assigned a huge project of converting some very old Word forms into fillable PDF forms. I have done okay with many of them, but ran into a snag with some of the form letters that our employees need to fill out. Basically, there is a block of text (the body of the letter) in which employees will need to be able to type in a date that the recipient of the letter must respond by. I have read up on floating fields and thought that was the solution to my problem, but it seems that floating fields are really just meant to be filled from a data source rather than having info typed into them.
Can anyone help-- I am desperate at this point. There has to be an easy way to insert a fillable text field object or a Date/Time object into a block of text so that the surrounding text will expand and contract around the length of the date entered (this is important, as many of these letters pertain to legal matters and cannot have blank spaces in them).

Hi,
You can split your text object into different parts and place text fields inbetween the parts. With a little manuvering, you can make it look good.
An alternative is to place text field(s) outside the letter body (and set the visibilaty to screen only). Use these to populate the floating field.
or
script the external text fields (or the subform containing them) to be "hidden" using the "Preprint" event, then revealing them ("visible") again using the "Postprint" event.
Hope this helps, good luck!
Stephen

MSS-Create Requisition Request -Error in Adobe Form

Hi all,
We are trying to configure MSS -> create requisition request using standard adobe form ISR_MSSRCF_SRQ3.
We have configured standard HCM process HR_MSSRCF_REQUISITION for it. When entering all
the mandatory fields in the form and clicking on 'check and send' , it displays an error
"you must enter a requisition title'
although we have already entered req. title in the field.
Anyone faced this issue before?
Please provide your inputs...

What was the solution finally? Would be glad if you could share.
Many thanks.

Output type processing error for adobe forms

We have created one output type in NACE transaction for Application V1(Sales) and attached the Adobe form to that output type. Whevener i am creating or saving a quotation / Sales order that output type is not processesed rather it is giving an Express document error that 'Update was terminated'.
Please help me out to solve it.

It is processed as there was a issue in the program.

Attaching same style in Standard text as well as adobe form

Hi Experts,
I have created 2 styles. One in se72 and second one in smatstyles.
But when i use 1st one in standard text, i can't see this style in adobe form to attach.
And 2nd one i can see it in adobe form but i can't see in standard text.
I want only 1 style to be used in both places.
Please help.
Thanks in advance.

Hello,
You can achive this in two ways.
First - Go to the form interface and right click on the node create a text field in the form context.
In the properties tab on the right hand side of your form context you can specify Text Type.
Following Text type can be selected.
Include Text
Text Module
Dynamic Text.
As per your requirement select Include Text and then specify the NAME, LANG & TEXT ID for the text.
Once this is specified you can add this text field on the form layout.
NOTE: This normally works only if you maintain this text in the header or footer on the form but not at the line item level.
There are few issues when you try to print this text at the line item level.
To overcome this if your requirement is at the line item level follow second method mentioned below.
User READ_TEXT to read the standard text in your driver program. Then Pass the internal table returned with the text from this FM to another FM FORMAT_TEXTLINES.
This table is then used to map it on the adobe form. The second function module takes care of formatting.
Thanks

Framework error in ADOBE FORM

Hi Experts,
While designing a ADOBE form, I am getting frame work error(exception caught),Could you please advice me why it was coming?
Regards,
Sam.

Hi Satya,
You are not attached any link?
Can you explain in detail why it was coming?It's helps me alot.
Regards,
Sam.

Text Object Error in Adobe forms

Similar Messages

Maybe you are looking for