Text of Layer Restore
Manually creating image menu that will use Set Text of Layer
onMouseOver. How do I set the Text of Layer back to default layer?
In other words, onMouseOut executes like Swap Image Restore, only
for text layer.
Disregard - I got it.
Similar Messages
-
Set text of layer...again
hi everybody
any ideas as to why when i use the set text of layer
behaviour i'm losing the hand cursor when you mouseover the link?
the behaviour works fine, but i'm getting the text cursor, so it
doesn't look like a link when you view the page, although it
works...i've tried changing the cursor option in the css, but that
still doesn't seem to make any difference...thanks in advance
saraIt would have nothing to do with the STOL behavior, but
rather what you are
pasting into it.
Any event handler directly on an <img> tag will fail to
produce the pointer.
You need to make sure that when applying behaviors directly
to <img> tags,
you always use the <A> onMouse event. Try that....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"sara-jane.s" <[email protected]> wrote in
message
news:e7j97s$7co$[email protected]..
> hi everybody
>
> any ideas as to why when i use the set text of layer
behaviour i'm losing
> the
> hand cursor when you mouseover the link? the behaviour
works fine, but
> i'm
> getting the text cursor, so it doesn't look like a link
when you view the
> page,
> although it works...i've tried changing the cursor
option in the css, but
> that
> still doesn't seem to make any difference...thanks in
advance
>
> sara
> -
A Very Easy Question.
I attempt to "set text of layer." I click on the plus sign on
the behaviors window, and set text to layer. A cute little box pops
up. In the Layer drop down box is a host of "unnamed
<span>"s. None of my divs are listed. In the body of this
page are Plenty of ID'd divs. I have named layers out the wazoo.
Why Are My Named Layers Not Listed In the Layer Drop Down
Box?> seen it done many times over in rss readers, although
when I look at the
> page
> source I secretly hope that it's not as complicated as
it appears.
It would depend entirely on your level of HTML expertise.
One way to solve the problem would be to use an IFrame to
contain the
external content on the page, but a frame is a frame is a
frame. By that I
mean that IFrames usually provide all the user problems that
frames do.
> With the accordion widget I'm using as the main visual
feature of the site
> I'm
> creating, I find it unnacceptable to think I'll have to
reload the entire
> page
> every time a user wants click on something to view
information; I thought
> programming like that was a thing of the past.
Linking from one page to another is how static HTML pages
work. Having a
single page to display multiple content elements as loaded
from a database
requires that the page return to the server to fetch new
content from the
database on each click. Either method requires a page
refresh.
Linking to content that is placed within an IFrame doesn't
require this page
refresh, but carries other disadvantages as mentioned above.
Does that help at all?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"iiinsomniiiac" <[email protected]> wrote in
message
news:[email protected]...
> Well, my apologies for not knowing exactly what you mean
by
> "round-trip"ing -
> but - I suppose I'm simply looking for the easiest way
to do just what I
> explained: an onclick event that loads an html file into
a div or td.
> I've
> seen it done many times over in rss readers, although
when I look at the
> page
> source I secretly hope that it's not as complicated as
it appears.
>
> With the accordion widget I'm using as the main visual
feature of the site
> I'm
> creating, I find it unnacceptable to think I'll have to
reload the entire
> page
> every time a user wants click on something to view
information; I thought
> programming like that was a thing of the past.
> -
Set Text of Layer Blowup?
Hi all,
Here is the page in question:
http://globalvisiondesigns.com/graphics.html
The box of cd's to the lower left is contained in two divs
with the set text of layer behavior. In FF and Safari in Mac it
works great. On the other hand, IE in Mac, it blows the bottom of
the page up, adding about 300-400 pixels of white space below the
footer. Usually when I notice something disastrous happening in IE
in Mac, it's worse in PC. Could someone please have a look at this
page in IE on a PC/Window XP etc. Perhaps I will get lucky this
time out, and it will be fine on that platform.
I have to admit, I copied the code and divs from a layout
that I did using tables. I don't think that is the problem though,
because this might have been happening in the tables layout as
well, just not as bad.
Thanks for any help!Looks fine to me in IE/WXPPro, and FF 1.5.0.6.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"engmix" <[email protected]> wrote in
message
news:ec148p$4m0$[email protected]..
> Hi all,
> Here is the page in question:
http://globalvisiondesigns.com/graphics.html
>
> The box of cd's to the lower left is contained in two
divs with the set
> text
> of layer behavior. In FF and Safari in Mac it works
great. On the other
> hand,
> IE in Mac, it blows the bottom of the page up, adding
about 300-400 pixels
> of
> white space below the footer. Usually when I notice
something disastrous
> happening in IE in Mac, it's worse in PC. Could someone
please have a look
> at
> this page in IE on a PC/Window XP etc. Perhaps I will
get lucky this time
> out,
> and it will be fine on that platform.
>
> I have to admit, I copied the code and divs from a
layout that I did
> using
> tables. I don't think that is the problem though,
because this might have
> been
> happening in the tables layout as well, just not as bad.
>
> Thanks for any help!
> -
Set text of layer problem (escaping ' and " in javascript)
Hi all
I am using the Dreamweaver behaviour "set text of layer" and
I am having problems with escaping
single AND double quotes in the javascript.
Because the text I want to set the Layer with contains some
javascript.
So the text of my layer contains both single and double
quotes.
I can escape the single quotes like this:
But I can't escape the double quotes the same way for some
reason.
even if I use \" javascript thinks it's the end of the
javascript function.
So I have tried using " in the javascript of the
text to set, but strangely, although it works
in Safari, it does not work in FireFox and IE.
When I mouse over my javascript link set in the layer, the
browser status bar shows the right thing
in Safari, but in IE and FireFox, it shows extra double
quotes...
onClick="MM_setTextOfLayer('list','','<a
href="javascript:;"
onClick="MM_showHideLayers(\'options\',\'\',\'show\')">designers</a>')"
Anybody knows the answer to this one?
seb ( [email protected])
http://webtrans1.com | high-end web
design
Downloads: Slide Show, Directory Browser, Mailing ListWhat about using the " entity? That *should* work.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"(_seb_)" <[email protected]> wrote in message
news:[email protected]...
> doubling the quotes did not work.
> But I solved the problem by removing the quotes all
together:
>
> onClick="MM_setTextOfLayer('list','','<a
href=javascript: ...
>
> that does it!
>
> Randy Edmunds wrote:
>> Try doubling the quotes to escape them, for example:
>>
>> onClick="MM_setTextOfLayer('list','','<a
href=""javascript:"" ...
>>
>> HTH,
>> Randy
>>
>>
>>> I am using the Dreamweaver behaviour "set text
of layer" and I am having
>>> problems with escaping single AND double quotes
in the javascript.
>>>
>>> Because the text I want to set the Layer with
contains some javascript.
>>>
>>> So the text of my layer contains both single and
double quotes.
>>>
>>> I can escape the single quotes like this:
>>> \'
>>> But I can't escape the double quotes the same
way for some reason.
>>> even if I use \" javascript thinks it's the end
of the javascript
>>> function.
>>>
>>> So I have tried using " in the
javascript of the text to set, but
>>> strangely, although it works in Safari, it does
not work in FireFox and
>>> IE.
>>> When I mouse over my javascript link set in the
layer, the browser
>>> status bar shows the right thing in Safari, but
in IE and FireFox, it
>>> shows extra double quotes...
>>>
>>> onClick="MM_setTextOfLayer('list','','<a
href="javascript:;"
>>>
onClick="MM_showHideLayers(\'options\',\'\',\'show\')">designers</a>')"
>>> Anybody knows the answer to this one?
>
>
> --
> seb ( [email protected])
>
http://webtrans1.com | high-end web
design
> Downloads: Slide Show, Directory Browser, Mailing List -
Illustrator CS 5.1 text sub layer problems
Some issues happening with text sub layers, any insight into correcting would be great.
1) The show/hide eye icon for the sub layers has no effect - text always shows.
Show/hide works for the full layer and for object sub layers, but not for any sub layer with text.
2) Text can NOT be selected on art board, it is behaving as if locked if you try to select on the art board, but is not.
Can select the text sub layer in the layers panel. Can select all on the layer in art board, but not text items individually. Can select objects individually on art board.
3) Many of mentioned text sub layers, but not all, also show a solid dot in right hand layers column indicating that they have appearance attributes applied. However no attribures are actually applied and remove attributes is grayed out.
I'm thinking that I hit some strange quick key combo by mistake that has done some wacky lock thing, but I can't find any indication of such.
Tried ungrouping all, unlocking all for the layer and the whole file with no change.
Any thoughts?
- AliceThere's a weird bug/issue with appearances applied at the layer state. Once they are applied, they can't be removed. That may be why your'e seeing the meatball to the right of the layer name. As far as I know the only way to remove that Appearance indicator is to copy/paste to a new layer.
I can't seem to configure a file which shows your issues other than what I've posted above. I'm thinking perhaps there's a clipping mask in place?
Any change you could provide a link to a sample file with the issue?
Have you tried basic trouble-shooting of removing the AI prefs? -
Setting Text of Layer Conflicts
Hello everyone. Thank you for taking the time to check this
out!-)
Attempting to accomplish:
In a single parent browser window, I have a layer containing
an image (that is viewable because it has already been initiated by
a "set text of layer" behavior), and a second layer containing a
text link that I would like to coordinate multiple behaviors.
Behavior 1: On Mouse over, set text of layer (PHOTOLAYER) to
JPEG2
Behavior 2: On Mouse Out, set text of layer (PHOTOLAYER) to
JPEG1
Behavior 3: On Click, Set text of layer to JPEG2
Behavior 4: On Click, Open new browser window containing new
html page (SECONDWINDOW.html)
Code:
<a href="slideShows/SECONDWINDOW.html" target="TARGET"
onclick="MM_openBrWindow('slideShows/SECONDWINDOW.html','TARGET','width=886,height=750');M M_setTextOfLayer('PHOTOLAYER','','<img
src="assets/JPEG2.jpg"
width="944"
height="403">')"
onmouseover="MM_setTextOfLayer('PHOTOLAYER','','<img
src="assets/JPEG2.jpg"
width="944"
height="403">')"
onmouseout="MM_setTextOfLayer('PHOTOLAYER','','<img
src="assets/JPEG1.jpg"
width="944"
height="403">')">LINKNAME</a>
Further explanation:
When I test this, noted Behaviors 1, 2 and 4 work fine.
However, I'm not getting the JPEG2 on click.
Any ideas as to why this isn't working? Or, is there a
simpler way of coding this whole thing? Any help is appreciated.
Thank you in advance!Change this -
MM_setTextOfLayer('PHOTOLAYER','','<img
src='assets/JPEG2.jpg' width='944'
height='403'>')"
to this -
MM_setTextOfLayer('PHOTOLAYER','','<img
src='assets/JPEG2.jpg'
width='944'
height='403'>')"
and this -
onmouseover="MM_setTextOfLayer('PHOTOLAYER','','<img
src='assets/JPEG2.jpg'
width='944' height='403'>')"
to this -
onmouseover="MM_setTextOfLayer('PHOTOLAYER','','<img
src=='assets/JPEG2.jpg='
width=='944='
height=='403='>')"
and this -
onmouseout="MM_setTextOfLayer('PHOTOLAYER','','<img
src='assets/JPEG1.jpg'
width='944' height='403'>')">LINKNAME</a>
to this -
onmouseout="MM_setTextOfLayer('PHOTOLAYER','','<img
src=='assets/JPEG1.jpg='
width=='944='
height=='403='>')">LINKNAME</a>
It's the improperly nested quotes that is killing you.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Muskieman5000" <[email protected]> wrote in
message
news:[email protected]...
> Hello everyone. Thank you for taking the time to check
this out!-)
>
> Attempting to accomplish:
> In a single parent browser window, I have a layer
containing an image
> (that is
> viewable because it has already been initiated by a "set
text of layer"
> behavior), and a second layer containing a text link
that I would like to
> coordinate multiple behaviors.
>
> Behavior 1: On Mouse over, set text of layer
(PHOTOLAYER) to JPEG2
>
> Behavior 2: On Mouse Out, set text of layer (PHOTOLAYER)
to JPEG1
>
> Behavior 3: On Click, Set text of layer to JPEG2
>
> Behavior 4: On Click, Open new browser window containing
new html page
> (SECONDWINDOW.html)
>
> Code:
> <a href="slideShows/SECONDWINDOW.html"
target="TARGET"
>
>
>
onclick="MM_openBrWindow('slideShows/SECONDWINDOW.html','TARGET','width=886,heig
> ht=750');MM_setTextOfLayer('PHOTOLAYER','','<img
src='assets/JPEG2.jpg'
> width='944' height='403'>')"
>
> onmouseover="MM_setTextOfLayer('PHOTOLAYER','','<img
> src='assets/JPEG2.jpg'
> width='944' height='403'>')"
>
> onmouseout="MM_setTextOfLayer('PHOTOLAYER','','<img
src='assets/JPEG1.jpg'
> width='944' height='403'>')">LINKNAME</a>
>
> Further explanation:
> When I test this, noted Behaviors 1, 2 and 4 work fine.
However, I'm not
> getting the JPEG2 on click.
>
> Any ideas as to why this isn't working? Or, is there a
simpler way of
> coding
> this whole thing? Any help is appreciated. Thank you in
advance!
> -
Will i lose my pics and texts if i restore my iphone
will i lose my pics and texts if i restore my iphone
If you can restore from an iTunes backup, you will get the information back listed in "iTunes will back up the following information" here:
iTunes: About iOS backups
That should include texts. Photos will depend on where they are on your computer. -
How Can I Get Text Edit To Restore It's Previous Work Space?
I was having some buggy behavior on my MBP, and finally had to do a fresh install of OSX.
I was using 10.8.2 on the old setup, and the same now in the fresh install.
In order to NOT import any settings that were causing the bad behavior, I only migrated in my Applications.
On my old system, (before the fresh install) when I quit TextEdit I did not have to save any of the open docs, they would just be there as I left them restored when I relaunched it.
Now when I try to quit it asks me if I want to save the untitled docs, or lose them.
And now, when I launch the app, it opens a new blank text window.
I would really like TextEdit to automatically open all the previously opened documents, and not ask to save them.
Any advice?It was staring me, well, in the face.
System Preferences: General
I'm actually kinda' embarrased... But then again, no one else had the answer either!
As a side note, the way I got to finally figuring it out, was when I launched Safari directly, it would restore the previous workspace.
But, when Safari would launch from a link in Mail, it would only open that single page, and I had to restore the workspace manually.
I then realized it was more system wide, which lead me to System Preferences! -
Text messages not restoring correctly
Hi
I have a BB Curve 9300 which I back up completely (i.e.. all data) on a regular basis using the BB Desktop Software for my Mac.
Today (11 Jan 2012) I went to restore only 'Text Message' data from a back up I did on 9th Nov 2011.
On completion of the restore, 12 Text Messages we're restored to my device, but the actual message content is blank. I.e.. the messages appear showing the 'Sender' and the 'Date', but the actual message content is missing. The icon for the messages is the same 'green bubble with a pen' that appears with draft messages.
Any ideas at all please on what has caused this issue, and how I can go about getting the content of the messages restored?
Many thanksYou can extract the SMS messages from that prior backup using a PC software MagicBerry made by Menastep...
Try that.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Will I lose texts when I restore my phone?
I have backed up my iPhone into my iTunes. If I now go to restore my phone and then restore my settings afterwards, will I still have all of my old texts?
Yes
-
Slide show in table cell and text in layer above images
I need to create a slide show within
a table cell (one cell of several). The
display should commence after the launch page has been completely loaded and only appear once. Also, there needs to be text in a layer above the slide images which changes coordinated with each slide but is generated independent of each slide and therefore may be positioned within the cell independently.
Anyone?Hi again Nancy,
You've provided very helpful information in the past. The code for the "show" in the upper right position would be perfect if the text-bar background could be made transparent and positioned higher against the image. Your suggestion has forced me to clarify my concept in my own mind. The need for transparency hadn't occurred to me yet.
An alternative would be the upper left "show" in a bottom layer with text with a transparent background in a top layer. The text in the top layer would remain constant from the time of the page's loading; i.e., would be independent of changes in the bottom layer. Perhaps I could figure out the code necessary to coordinate that text's change of shade from one slide to the next appropriate to the slide's shade.
I'm assuming that a table cell can be partitioned into layers using HTML and each layer programmed independently using JavaScript.
Thanks again for your prompt attention. -
Can't rotate individual letters in a text shapes layer
So I created some text in After Effects and converted them to shape objects. I can do X, Y, and Z rotation on the whole phrase but not on the individual letters. Is there any way to fix this?
You will have to move each shape layer to a new layer so you can use the layer rather than the shape transform controls. Shape transforms are only X and Y. Unfortunately there is no automatic way to 'release to layers' as there is in Illustrator. You have to cut (ctrl/cmnd + x), create a new shape layer (sorry no keyboard shortcut), and paste (ctrl/alt + v).
-
Creating a button with a text label layer
Hi guys. Looking for any tips on how best to implement a button with a text label. I initially created a rectangle object on a lower layer and with text in the upper layer via type tool. When I group both objects and create the button the text is readable in my InDesign (document) computer screen but the minute I preview it on my iPad the button becomes unreadable and pixellated. I tried various approaches by moving the text layer outside the button group does not display the text at all. Has anyone run into this issue? If so what is the best practice? Thanks in advance.
Thanks for the insight Neil. Regarding my button design its nothing fancy. Its a rectangle box on one layer and a text label on another layer inside the rectangle object. What I'm trying to simulate is when the user taps on the button the click state will change colour to notify the user that they have activated an event and in this case a navto://...
The way I've implemented it is the rectangle is coloured pink [Normal] and when tapped the light pink [Click] toggles between both colours BUT my text label disappears.
See the screen shots below. -
BUG: Saving Text with Layer Styles to PDF
I was just able to take the CS6 beta for another test run, and it seems the following ancient, but high-priority bug (at least for me) hasn't been addressed:
When saving large Photoshop documents (composites in resolutions like, say 7000x10000 pixels) to Photoshop PDF, certain layer styles are often not exported correctly when applied to text layers. The layer styles that are affected are those that render pixels that are then clipped inside the text, such as Gradient Overlay, Bevel & Emboss etc.
When output, they usually don't span the entire text in the PDF, but are cut off with a straight line at some point (I can't supply an example image right now, my apologies). Inside of Photoshop, they render correctly at all zoom levels. My guess is that this is somehow related to the raster data being written as individual tiles and for some reason, some of these are then omitted for layer styles.
The problem isn't new to the CS6 Beta, but has existed for many versions. I have run into it in both Mac and Windows versions. The current workaround is to always expand layer styles on the text layers that are affected into layers before exporting, which is tedious and error-prone since there is inevitably something that gets missed (EDIT: I was wrong there, that workaraound doesn't work, the problem persists even if the layer style is expanded into a layer that is then applied as a clipping group).Two possibilities: Pre-compose everything and fade the comp or use a second layer that has the layer styles, but in its Blending Options for the layer styles has set Fill opacity to zero, so only the styles are rendered, but not the source. Whjat you are seeing is normal behavior based on how styles are supposed to work. Whenever there is a non-zero (non-transparent) pixel, the get applied, where the pixels opacity acts as amultiplier for the style's intensity. Looks good for some, but often causes this popping appearance...
Mylenium
Maybe you are looking for
-
Sales office and sales group are not copied from quotation to sales order
Hi All, I have maintained sales office and sales group in quotation maually at header level.while coping to sales order sales office and sales group are missing. Please let me know what would be reason for missing those twoand whether i should check
-
Converting from Word to .pdf distorts formatting
When I convert a Word document to a .pdf, when I have a bulleted list and the first sentence of each bullet is underlined, format gets distorted when I print to .pdf. I've retyped the document from scratch and experimented with a few different fonts
-
SQL Developer on Windows trying to connect to M/F with RACF authentication
I am currently running the latest downloaded version of SQL Developer on a Windows XP client machine. We have recently upgraded our z/os Oracle version to 10.2.0.3 I was advised to use the thin java client in SQL Developer by inputting the URL into t
-
Buonasera, si verificano alcune anomalie usando Ps CC: 1) Uso Photoshop CC in ambiente Mac OS 10.8.5 e aprendo una foto in Camera Raw da Bridge con doppio click con la penna Wacom Intuos 4 e finite le modifiche del caso, quando clicco su 'Chiudi', Ca
-
Post Author: tantk CA Forum: General I have a summary field on expenses based on month. How can i select those months(with details) who's total monthly expenses are more than $1000.