Text placement flowing onto new pages?

I am having a difficult time with the placement of text as it flows onto the next page.
I get everything to flow correctly--the field expands, goes onto the next page fine. I have a time field associated with this text field, which pushes it to the right. However, when the text field flows to the next page, it moves over to the left! I want it to stay in place, but I can't figure out how. Any suggestions?? It's kind of driving me batty!
I would have attached the pdf here to show exactly what I'm talking about, but they seem to have taken away the ability to attached pdf documents? I  can only attach a video or picture. So I took a screen shot of what the form looks like when you try to fill it out and it goes onto the next page. I hope this helps.

I believe, there are 2 items to be attantioned:
first:
look at object-panel, the field-tab, there is a cross to be set at pagebreak...
second:
look at the Layout-panel: there is a cross to be set under Y and Hight!
if no effect, than, take a new part of form around our item and check these 2 opinions to be set:
it might be work.
well, it has been this weekend my fashion to find a relation between these two selected items, not well.
ok?!

Similar Messages

  • How do I get text to flow from one page to the next in Pages 5?

    How do I get text to flow from one page to the next in Pages 5 with the Maverick system?

    What may be overlooked in Pages v5 is the notion of combining Text Boxes via the Menu > View > Show Arrange Tools. When you select two Text Boxes, an extra panel unfolds at the bottom of the Arrange Tools window. Uncheck one Text Box and this panel abruptly disappears.
    One can achieve text flow effects between Text Boxes differently based on how one positions the Text Box overlap, and choice of effect above. Though not the accustomed flow found in Pages ’09 v4.3, flow does occur. Consider the possibilities of combining a Shape and a Text box to cut an irregular Text box.
    If I create two Text Boxes and position them side by side with outline touching and choose Unite, this creates one larger Text Box and text flows across and down. On the otherhand, if I overlap the upper left corner of a lower Text Box over one above and to the left, then choose Union, pasted text fills the first Text Box and then flows across and down into the other box. Here is a Union example:
    Intersect will leave a small Text Box where the two overlap, so not much value there. Subtract will cut a chunk out of one Text Box that is the size of the overlapping piece of the second Text Box:
    And Intersect will leave an island in the center where the two Text Box overlap, with flow jumping over this bridge.
    Clearly, this is not what we were accustomed to in the past, but with imagination, style, and layout tuning, it does offer alternative Text Box creativity and layout. Of course, there is the option of simply returning to the previous Pages version for true Text Box linking that most will want to use.

  • Help Req'd! - Table will not flow onto next page!

    Hello!
    I am currently doing some form design for a large SAP project in the UK and am having problems with getting a table on a remiitance advice form ive created to flow onto a new page.
    currently my form is configured as follows:
    - saved as a dynamic pdf.
    - 2 master pages: the first containing text fields for form title, company logo, addresses, and a disclaimer at the bottom, page numbering, as well as a border created with rectangles. The second contains all of the above except the addresses.
    - 1 body page: contains a subform set to flowed (top to bottom) which contains a table with header/data/footer rows. The data row is set to repeat data so as to expand when there is more than 1 dataset.
    i have tried playing with content areas but they will not stay at the size to which i draw them and then cannot be manipulated afterwards, also i only have pagination settings available to me on the body page itself in the hierachy. the subform inside it, and the table inside that, have greyed out pagination settings.
    finally the body page is set to positioned at present as setting it to flowed causes the subform containing the table to shoot to the top of the page!
    The problem I am getting is that the table when containing lots of data just runs off the end of the page!!
    Any ideas much appreciated!
    Thanks!!
    Edited by: Ryan Harris on Jul 3, 2008 1:05 PM

    Basically you can tell the bodypage to overflow to the second masterpage when it runs out of space.
    On the bodypage properties that's done within the pagination tab.
    Make sure that you enable the "Allow page breaks in contents" tickbox.
    By the way, just wondering, how did you save the form as dynamic, since dynamic is only enabled in the SAP world by setting a dynamic/enabled flag.
    If you are testing outside of sap in the LiveCycle designer you might want to close the file and then reopen it, after you saved it as dynamic. There's a nifty setting in the LiveCycle designer properties which enables you to create dynamic pages by default. It's in the LiveCycle Designer Options.

  • How do i layer text boxes in the new pages?

    I have the new pages, and every time i try to layer a text boxes, one text box disappears. How do i change that?

    Please give the exact version number of Pages, it helps when sorting out problems.
    The Textbox doesn't disappear.
    The text in the Textbox is pushed away by the Textwrap on the other Textbox/es.
    Generally, with the Textbox/es selected:
    Toolbar > Format > Arrange > Text Wrap > None
    Peter

  • How to make text elements flow to next page depending on the table above it in main window (smart forms)

    Hi all,
    In my main window i have a table that contains line item data.
    Just below that i need to display text elemet (some text and terms & conditions).
    as below
    Based on the items in table, it should flow to next page. But it is not happening. rather the data which do not fit into first page gets deleted.
    Please help to solve this. Its urgent.
    Thanks in advance

    Hi Rashmi,
    please drop these texts from your table footer (i hope you have put into footer of your table), just create a template after your table and  put your all these data within this template and make sure that your this
    template should be called after your tables data get displayed.
    Or you can create a text , after your table where you put your data, and it should get displayed when the line items ends for your table.

  • Flowable Form does not flow onto next page

    I have created a form with a table wrapped in a subform and made it flowable and each field expandable. That part works great. However, I cannot get the content to flow to a subsequent page. When the content is too large for the page, it just keeps pushing down beyond the bottom of the form where I cannot even access it.
    The form contains a table of three rows and within each of those rows, all but one column contain a table of three rows. The highest level table is wrapped in a subform and it is marked as flowed with each text field set to expand to fit. I've selected every row and subform I can and checked the box "Allow page breaks within content". The forms still does not break at the end of the page but just keeps pushing the data down off the page.
    Any help you could give me would be greatly appreciated. Thanks.

    Thank you for your assistance. However, that subform is flowed and Allow page breaks within content is checked.
    Is there something under pagination for that subform that I might need to do. I tried creating a page 2 and intended to set the Overflow on the pagination tab to page 2 but that is not an option. I can only set this to PageArea1 or ContentArea1 which I see are objects in the master pages and I do not have a page 2 in master pages. Is that the key?

  • I made a flowable form with two buttons with actions to go to a page, but they won't work when content flows into new pages. Is there a way to use javascript to take the user to a specific object? I think that will solve my problem.

    I think I answered my own question. I used setFocus() with an object that I hid underneath a text field. Works perfectly, and it won't matter how many new pages a user creates in the flowable form.

    WhyWontThisWork:
    I can definitely how frustrating it must be to not be able to take pictures or even view pictures that have already been taken with your LG Dare.
    Since this problem has started, have you tried to either:
    a.) put that memory card in an alternate phone to see if the pictures can be viewed on there
    b.) use a card reader/adapter in a computer to see if the pictures can be viewed on the computer
    c.) take the memory card out of the phone and then try to take a picture?
    What I am trying to determine is which of the 2 is defective (phone or memory card)
    If you are able to view pictures in another phone, or on the computer , then you may have a bad card. If that is the case, you can transfer the pictures to the computer and then format the memory card by
    Note: This procedure will erase all data on the memory card. It is recommended to back up the data.
    From the home screen, touch the menu tab.
    Touch Settings.
    Touch SD card & phone storage.
    Touch Unmount SD card.
    Touch Format SD card.
    Once you have done the formatting, try to take pictures again. If you continue to have problems it more than likely is the phone.
    Also, in order to access PixPlace, log into your MyVerizon account, at the top, you should see "Messaging" go down to "Manage your photo albums" once there, you should see "My Media", however, if you have already received a message advising you that your album would be deleted if you haven't logged on in more than 180 days, all pictures have then most definitely been deleted. Again, we do send warning messages once the online album hasn't been accessed in 150, 175, 180 days respectively prior to deletion.

  • I cannot get my text to flow to following pages once I insert it.

    The chapter text box shows a plus sign in a small box at the bottom-center of the text box. I am a complete a neophyte. What do I do to make this all work. I need details. I am using the black and white template (the first one). My requirements are very simple as I'm creating a kids chapter book (4,000 words, 18 B/W illustrations). Thanks.

    I still have a separate issue with the second page (right-side page) on the chapter template I chose. It used to have the b/w flower image, which I deleted.
    Rememeber you do not have flowing text boxes on that  page. You  have the text box on the left. In place of teh image, you can insert another simple text box, drag it to size on the right.
    Also remember it does not flow so you need to contrive and text to fit that box. OR you can  drop and image of your own on that side of the  page and if its not same size as the original placeholder "flower" image, add the text  box above or below to use as you can.
    Before you get too deep into your project , let me add some suggestions to avoid confusion later.
    if you have not already organised your books systems, this is mine:-
    I have a folder in the "Documents"   current in use is named "iBooks 2014"  inside this I add a folder for each book I work on given the  name of the book. Inside that folder I save the "mybook.iba"  file, any duplicates or copies or variations of teh  book until its finalised and they can be dumped. I also save  teh exported book files and all screen shots and cover page images.   Everything related to the book is in one folder and not scattered all the hard drive.
    I suggest you open another different template and remember that where you see any image,  you can drag and drop  your own image on top ( drop when you see the old photo get a blue line around it)  use a spare  book file to test things before you mess up your  project.

  • How to link text box in the new page?

    Example I'm writting a newsletter. I want the text in a box in first page to follow on the third page. I want to be able to clic on a word to read what is at the third page.

    Feature removed along with over 90 others:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=b14426a2c5af2 65f2213d98ee45f08d7&mforum=iworktipsntrick
    Pages '09 should still be in your Applications/iWork folder.
    Export your Pages 5 files to Pages '09 or Word .docx and trash/archive Pages 5.
    Then rate/review Pages 5 in the App Store.
    Peter

  • How to square up texts and flow through these pages ?

    Hi!
    I have to square up and shading numerous paragraphs of different loguitudes in Indesign CS6 .
    These have them identified in the xml for tag
    Often there tour of pages in second tests so I thought convert a table but not if it is the best solution because no party cells and lose a lot of time adjusting the pages so you are not left me out of square .
    Can you think of any other solution that does not require much manual work ?
    Thank You

    Hi
    I am not sure about your question 1 exactly (may be you can elaborate) but you cannot probably track that information module wise.
    For the second question, you can count the number of httpd processes in 11i and get a estimate of how busy the system is . there wont be one to one mapping between client and application server connections but you can check the access logs if you are troubleshooting an issue.
    MSK

  • How do I make content in a text field continue onto a new page?

    I am creating a form and one of the pages contains a text field for an essay. I'd like the responses in this text field to carry onto new pages if they reach the end of the first page. How do I make new pages appear with only the continued text field? Thanks!

    All right...
    public class guiClient extends JFrame implements ActionListener {
    static String userString;
    static String currentFont;
    String fontchoice;
    String fontlist;
    static JTextField userName = new JTextField();
    public guiClient() {
         super("My Client");
    public guiClient() {
         super("My Client");
    // Create a ComboBox
    GraphicsEnvironment gEnv = GraphicsEnvironment.getLocalGraphicsEnvironment();
    String envfonts[] = gEnv.getAvailableFontFamilyNames();
    Vector vector = new Vector();
    for ( int i = 1; i < envfonts.length; i++ ) {
    vector.addElement(envfonts);
    JComboBox fontlist = new JComboBox (envfonts);
         fontlist.setSelectedIndex(0);
         fontlist.setEditable(true);
         fontlist.addActionListener(this);
         fontchoice = envfonts[0];     
    //Create a regular text field.
         JTextField textField = new JTextField(10);
         textField.setActionCommand(textFieldString);
         textField.addActionListener(this);
    public void actionPerformed(ActionEvent e) {
    //if the action is from the textfield (e.g. user hits enter)
         if (e.getActionCommand().equals(textFieldString)) {
              JTextField fromUser = (JTextField)e.getSource();
         if (fromUser != null){
    //place user text in editor pane
    //send message to server
                   if (userName.getText() != null) {
                        userString = userName.getText().trim();
                   out.println(userString + ": " + fromUser.getText());
              fromUser.setText("");
         else if (e.getActionCommand().equals(fontlist)){
         JComboBox cb = (JComboBox)e.getSource();
    String newSelection = (String)cb.getSelectedItem();
    currentFont = newSelection;
         userString = currentFont;
    return;

  • Newbie needs InDesign CS5 help: text overflow into new page

    Hello...  so, I've been using InDesign CS5 to create a document, because it transfers nicely into the pdf format.  I had written most of the stuff a couple months ago, am transferring it to InDesign via copy and paste, and then have to go in an "re-do" the bolds and italics and hyper links etc, b/c it does not transfer those things to InDesign.  I can live with that.  However, with this 10+ page document, how can I copy all my text and paste it onto 10 pages+ of InDesign, rather than piece-by-piece on a page-by-page basis?
    As of now, I have to take the first page of my original, and then copy and paste and estimate, add and subtract until the sizing is right...  and then I have to do that with page 2...  and page 3... and page 4.. and... well, you get the idea.  More than 10 pages of this!  Now, the straw breaking this camel's back is the fact that I have to go in and do a revision in one part...  so that I have to move and shift part of page 2 to page 3, and page 3 to page 4, and page 4 to page 5, and...   ahhhhhhhhhhhhhhhhh!!! 
    Is there ANY way to get text to simply overflow from one page to the next?  When you try to drag a text box down to the next page you've added, it stops at the bottom of the page and will not let you flow into the next page.  I am not particularly tech savvy and don't know coding or html or etc.  I am looking for a way to allow text to flow from one page to the next as if you were writing a Word doc.
    I have 80 more pages and 7 more documents to do this with.  Please help!  I want to cry at the thought of dealing with this in every single 8 to 12 page document I'm recreating. 

    All is not lost for autoflow even using copy paste. Here's a nifty little trick that will help you:
    ID does not require a text frame before you paste, so if you don't start with one, or don't use the one you've already drawn, ID will conveniently draw a 2" square text frame in the center of the screen if you issue a paste command. This frame will contain all of the copied text, but most of it will be overset (you'll see a red plus sign inthe "out port" on the lower right of the frame).
    Overset text can be picked up and flowed using autoflow, just as if you were placing a text file, so use the selection tool (black arrow) to select that small text frame if it isn't already selected, then click the red plus sign to pick up the overset. You should now have a loaded text cursor that looks sort of like the upper left corner of a page. DON'T click it anywhere yet.
    First press backspace to delete the small text frame (which should have remained selected). Now you can start your auto-flow holding the Shift key and clicking your loaded cursor wherever you like. All of the text, including what was visible in the now deleted frame is in the cursor waiting for you.

  • Table of contents and the order of multiple text frames flowing across pages

    I have a multi-page document,
    on each page, there are 2 text frames:
    - A text frame for containing a PAGE TITLE
    and
    - A text frame, flowing from one page to another containing: a MAIN TITLE, a SECTION TITLE, and flowing body copy (on page 1); and another MAIN TITLE, a SECTION TITLE, and flowing body copy; (on page 2)
    When I generate a TOC, using the Page, Main and Section Titles styles, the expected outcome would be:
    Page Title             1
       Main Title           1
    Section Title          1
    Page Title             2
       Main Title           2
    Section Title          2
    But because the Main title and Section titles are all within one flowing text frame and the content flows across multiple pages, and each of the Page Titles are within 2 separate text frames, the actual TOC generated is:
    Page Title             1
       Main Title          1
    Section Title         1
       Main Title           2
    Section Title          2
    Page Title             2
    ...where the TOC lists all the TOC items from the flowing text frame in one grouping first, then the individual free standing text frame title.
    QUESTION: Is the only way to automatically rectify this is to combine all the text into one flowing text frame? or is there another workaround?
    Have played with the left/right, top/bottom alignment of the individual text frames; also experimented with the object layering, to no avail..
    Thanks for any insights.

    I ended up using a product called InFlow from EmSoftware.  The solution offers a plugin to InDesign that builds pages on the fly when there is overset text.  The setup is pretty minimual and it seems easy to use.  The only drawback that the plugin MAY have is that it does not remove the pages it built if the pages are not needed from record to record.  I could not test this myself since my test data did not test more then one record, but when I turned my proof set off, the pages that were built were still on screen.  It does seem to work well for what we are looking to do, so if anyone is looking for something that will build pages on the fly in situations where the "Dynamic Story Handling" is not available, I would suggest looking into this.

  • How do you link 2 text boxes in new pages

    How do you link two text boxes in the new pages.  The old one was much easier to use.

    I think this is impossible! Ive been trying today and I couldnt do it. Then I opened up an old document that had text linking in it and I got a message telling me that the text boxes were now unlinked!  Why would you remove that? For me this software is now useless. How on earth do I get my old version back?
    <Edited by Host>

  • How to have text that is over several pages

    New iBooks user.  How do I get text to flow to next page?

      You're welcome.
    If you'd like to study up on the mechanics involved when editing a book in iBA, see the related video in iTunes Connect and check out:
    • Publishing With iBooks Author
    http://shop.oreilly.com/product/0636920025597.do 
    • iBA/Apple:http://www.apple.com/support/ibooksauthor/
    You'll be fine I'm sure. and best of luck w/your book(s).
    Ken

Maybe you are looking for