Text problem - will not run on...gets cut off

I need my text to appear to the right hand side of an image, so on the left of the screen is the image, and to the right is the text.
Is there an option to make the text run on, underneath itself? It keeps running along and gets cut off the edge of the screen!

yeah, just hit 'enter' when you want a line break. it's not like MS Word where it breaks when you hit a margin. once you are done typing your text you can center it or make it left or right adjusted.
Message was edited by: budakhan

Similar Messages

  • Loaded from text cd. will not run samples from same cd

    I have adopted Delmar text Electronic Devices: Systems & Applications and intended to use the copies of multisim 2001 that we own.  When I discovered that the text includes a limited copy of Multisim textbook edition, that seemed even better; it installed clean, but when I attempted to open any of the included sample files on the CD, it told me that this edition could only open sample files from the install CD: exactly what I was trying to do.  What's going on?  I'm running Vista Home Premium, which will typical for several of my students.

    I would suggest that you copy the contents of the CD into your local hard disk, "and" make sure they are not read-only as most of the files of a CD are. So, in other words, open the files on your computer, not from the CD.
    Give that a try to see if that is causing the problem, since on the other hand, Multisim 2001 is not designed for Vista, only the latest release Multisim 10.0.1 is the one supported under Windows Vista.
    Nestor
    National Instruments

  • Fiefox will not run, I get proxy server refuses connection.

    When I tried to open Firefox this is the what I got. I have removed and reinstalled it with the same result.

    In Firefox 3.6.4 and later the default connection settings have been changed to "Use the system proxy settings".
    See "Firefox connection settings" in [[Server not found]]
    You can find the connection settings in Tools > Options > Advanced : Network : Connection
    If you do not need to use a proxy to connect to internet then select No Proxy

  • TS1424 songs are not complete get cut off at the end

    I downloaded this album but some of the songs are not complete they get cut off at the end what can i do?

    If you are in a country where re-downloading is possible (iTunes in the Cloud and iTunes Match Availability by Country - http://support.apple.com/kb/HT5085), delete the track and download again (Downloading [using iOS or computer] past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519).  See tips on downloading in https://discussions.apple.com/message/19097773
    If you cannot download a second time, contact iTunes Store support staff through the report a problem links in your account history or,
    iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html > Get iTunes support via Express Lane > iTunes > iTunes Store

  • I uninstalled Firefox once, reinstalled it and it ran. I had a problem so I did it again. Now it will not run and I get an error message saying that firefox is running and you can only run one at a time. I can't figure out what is running.

    Because of a problem, I uninstalled Firefox once, reinstalled it and it ran. I had a problem so I uninstalled/reinstalled it again. Now it will not run. I get an error message saying that firefox is running and you can only run one at a time. I have uninstalled multiple times and can't figure out what is running. The is only one Firefox installed and it is not open. What does this mean and how do I fix it?

    If you use ZoneAlarm Extreme Security then try to disable Virtualization.
    *http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
    See also:
    *[[/questions/880050]]

  • When upgrading quicktime, I get an error code: -3, and itunes will not run.

    when upgrading quicktime, I get an error code: -3, and itunes will not run. How do I fix?

    i 'm very interest because on 3 PC , i have the same problem and i work at tv producer...

  • Downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with the

    downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with them and then called Apple support and worked with them for 3 hours. No one can figure it out. Is there something wrong with this version? the pdf was created in 2004. Do I have to pay to get Acrobat?

    Let me give you a slightly different perspective than everyone else here.  You are using an unsecured wireless network, which means that all your network traffic is easily available for viewing by anyone else using that network.  That's bad.  Very bad, for you, unless you absolutely trust everyone who lives within range of this network.  So stop doing it.
    As to the Mac not connecting, wireless networking is simply too complex for any reasonable answer without more information.  There are many possible error points, and as often as not it's the Mac that can connect and the Windows PC that cannot.  Since you can't give us any information about the configuration of the neighbor's network, and can't make any changes to it, we can't do much to help you troubleshoot it.

  • I just put itunes upeate 11 on and now itunes will not run. I get an error that sys iTunes has stopped and windows is sutting it down. I reinstalled 10.7 and it will not run eather now.

    I just put itunes upeate 11 on and now itunes will not run. I get an error that sys iTunes has stopped and windows is sutting it down. I reinstalled 10.7 and it will not run eather now.

    C Mawle wrote:
    Thanks.  I have followed all the instructions as recommended and nothing has worked so it looks like the restore/update may have been interrupted - would loss of internet connection do this?
    Yes it would, possibly even brick it.
    Have successfully connected my ipod nano with iTunes so looks like the device driver is working.
    Can I use my ipod nano USB connector to check?
    It is not much help to you, since the device that you need still not recognized.
    Anyway looks like I may have to swallow the loss of data.  Have set-up a call for tomorrow with Apple support so will wait until after this before doing the factory restore!
    Good luck, but if you expect miracle from that call good luck again.

  • ITunes will not up date get a messge saying problem with installer packge

    itunes will not up date get a message saying problem with installer packge

    TRy the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • HT203176 when i insert a software disc into my mac it will not run, how do i get it to run? thanks

    Please help - when I insert a software disc into my mac it will not run, how do I get it to.
    Thanks

    Then as Kenichi Watanabe has already advised...
    The software disc should appear on the Desktop (or in the sidebar of a Finder window). 
    Double-click the disc icon (or select it in the sidebar). 
    On the disc, there should is often an Installer, or the application itself.

  • HT1338 Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Sorry for being unclear.
    When I am using the update in the App Store App, there will be a list of various applications that have updates to be installed (Final Cut Pro will be in this list).  I will already be logged in with the Apple ID I use for everything (my dev account).  I will be able to update all of the other various applications needing updating except for my Final Cut Pro.  When I click the update button next to the FCP update, it will give me an error saying  "This download is not available for this apple ID either because it was bought by a different user or the item was refunded or cancelled"
    I have not had any applications refunded or cancelled and this has only happened since my update to Yosemite.  FCP was working fine until the upgrade.  Is there anything that can be done to fix this?

  • I have recently purchased finale 2011, and it installs, but will not run?  Any idea what the problem is?

    I have recently purchased the finale 2011 music program, and it installs without any problems, but will not run when I try to start up the program.  It acts like it is going to start, but stops when loading the plugins.  I have been talking with Finale tech support for three days, and they are coming up empty, but they are still trying.  Any ideas what the problem might be?
    Thanks,
    John

    Try booting in Safe Mode (hold the shift key while booting until the grey progress bar appears).
    If you're able to log-in, then re-boot and log-in

  • 21in. imac running Mountain Lion will not start just get grey no entry sign

    21in. imac running Mountain Lion will not start just get grey no entry sign

    David,
    Please carefuly read what Apple says in how to troubleshoot this issue. Also PLEASE complete your profile,we don't even know what iMac you have or the version of OS X it is running.
    Gray screen appears during startup

  • Fast dial will not run need to get back to 6 of will try IE 9

    fox 7 will not run with fast dial need to roll back to 6 of will install IE9 7

    see https://support.mozilla.com/questions/885622

  • No matter what I do, I cannot get Firefox to run Java correctly. I've deleted the cache, etc., etc., but my school programs will not run on Firefox.

    Firefox (v. 18.0.1) will not run my school programs any more since the Java scare. It also is choking at running screencast-o-matic.
    And this is happening on both my computers not just one.
    I have emptied Java cache, emptied the browser caches, downloaded the latest Java, Reinstalled it. Cleared caches again, etc., etc., etc.
    Firefox will not run Java and I have to use IE which is the only browser that I have gotten the scripts to function so that I can use my programs.

    Been there done that. Actually I have even install a fresh Firefox on virgin win8 64-bit laptop (without synchronising to my firefox in general) with the absolutely latest Java - didn't help either. And my test page is not the only one, but as I did this myself I know exactly the contents.
    Since then my Firefox is in sync... well more or less as it seems it only sync some ways but that is another matter... but at least most of my stuff is back in place.
    What I know is that the egg.html takes forever to load, and that the java part never shows. I think that this goes for most Java places, but I do remember that it was not always the case. Right now even the Oracle test page can't find Java, and I know it could at some point. Reinstalling tells me I already got Java, so it is there, likewise it is active in the plugin window. But some parameter some where must have gone haywire.

Maybe you are looking for