Text replacing image! HELP!

So I am creating my first website, and I have gone through
those tutorials in order to get a good feeling for dreamweaver, I
am making a site that is mainly table based, and I want to put
images over a image, but everytime I do it it deletes the image, I
can't figure it out. Thanks for the help.
Shawn

You are selecting the image, and then you begin typing? Sure
- that would
delete the image.
Look - the best way to get text over an image is to put the
text IN THE
IMAGE. The second best way would be to make the image be the
background
image for a container and put the text in the container. But,
be aware that
this method, or any other method for superimposing the text
over the image
will all suffer from the same unpleasant downside. A single
resize of the
text display in the browser will trash your layout.
So - the bottom line is this: why are you trying to do this?
If it's to
have the website be a big graphic with text superimposed at
key locations,
then that's not a website. It's a badly flawed plan, and will
never be
satisfactory. Can you tell us if this is what you are trying
to do?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Shawn Kirsch" <[email protected]> wrote in
message
news:g9emlv$1g2$[email protected]..
> So I am creating my first website, and I have gone
through those tutorials
> in
> order to get a good feeling for dreamweaver, I am making
a site that is
> mainly
> table based, and I want to put images over a image, but
everytime I do it
> it
> deletes the image, I can't figure it out. Thanks for the
help.
>
> Shawn
>

Similar Messages

Iweb text as image -- help!!!

I can't understand... I used the black template and I had two different behaviors:
in the "about me" page the text box on the left after the publishing has been exported as image (keeping the hyperlinks) while all other pages every text box has been published as a TEXT BOX!! How can I set Iweb to export EVERY TEXT BOX as image???
Please, it's driving me crazy!!
thanks

There's a simple workaround to this problem which also drove me nuts. On version 1.1.1 at least the problem is with the templates. Don't put your main text into the boxes provided - use this as a title box or leave it blank (it seems to need to have something in it as you can't get rid of the box itself although you can shrink it down). Create a new text box and paste your text into it and it should render as text- it did on mine. Don't forget to use a single, web friendly, simple font as other contributers have suggested.
Check the pages in the personal development section of my site -
www.thecontinuum.org.uk
Strangely the first page just wouldn't do the same thing without goofing up the rest of the page- putting hyperlinks in thwrong place etc. I left it as image in the end- if anyone knows what's going on there then let us know.

Need help with adding formatted text and images to Crystal Report?

Here's my scenario:
I have a customer statement that's generated as a crystal report and that has a placeholder for advertisement. The advertisement is mixture of formatted text and images. Until now we only had one advertisement that was always used on the report. The new requirement is that we would have a pool of hundreds of advertisements and would need to display one specific advertisement on the customer statement based on various marketing criteria. They key is that the advertisement content will be determined programmatically and cannot be hardcoded into the report. I'm using Crystal2008 with .net SDK.
Here are the solutions I thought of, but I'm still rather lost and would appreciate your help/opinion.
1) Pass HTML or RTF to the report
Not really sure if this is possible and how to get it done. Also how would I pass in images? Would display formatting be reliable when exporting to PDF?
2) Create each add as a subreport and append it programatically
I actually have this working, but I only know how to append a new section to the end of the report and then load the subreport to the section. I have no other controll of the placement. Is there a way to dynamically load a subreport to a predefined section in the main report? How about adding a dummy subreport in the main report as a placeholder and then replacing it with a different subreport? How could I do this?
3) Pass an Image to the report
I would create each advertisement as an image and then would somehow add the image to the report. How would I load the image and control the placement? Could I somehow define a placeholder for the image in the main report-maybe a dummy image to be replaced?
Thank you.

Hello Pavel,
I would got the third way.
You can use dynamic images in your report.
Just by changing the URL to the image the image can be changed.
Please see the [Crystal Manual|http://help.sap.com/businessobject/product_guides/cr2008/en/xir3_cr_usergde_en.pdf] and search for images.
or directly here
[Setting a Dynamic Graphic Location Path on an Image Object|https://boc.sdn.sap.com/node/506]
[Dynamic image and HTTP://|https://boc.sdn.sap.com/node/3646]
[codesample for .NET|https://boc.sdn.sap.com/node/6000]
Please also use
[Crystal Reports 2008 SDK Documentation and Sample Code|https://boc.sdn.sap.com/developer/library/CR2008SDK]
[Crystal Reports 2008 .NET SDK Tutorial Samples|https://boc.sdn.sap.com/node/6203]
Hope this helps
Falk

Use Powershell to replace text with image in Word document

I have a powershell script that uses a Word document as a template to create signatures that I am pushing out to my organization.
The document is populated with text formatted the way I want the signature to look, that I then do a FindText and ReplaceText on. This works fine for replacing text with text, but I can't figure out how to properly replace some of the holder text with
an image and a link. I found a few posts about adding images to word documents, but none that seem to work properly in this scenario.
Any insight would be greatly appreciated, thanks!

Dear BOFH,
You are correct that method I outlined is not for inserting an image into a signature block (which would be in Outlook, not Word). The links you post do certainly deal with outlook signatures, well done... Except that the question was about how to
use a Powershell script to replace text in a Word document with an image. Sure it was framed in the context of creating signatures, but the poster expressed that they already had a method of generating and replacing text, and just needed to know, as
I did, how to do the thing they actually asked.
Please BOFH... Please forgive my audacity in hoping to find a reference (any reference) to how to replace Word text with images via Powershell in a thread titled "Use Powershell to replace text with image in Word document".
This is certainly a scripting question, and even something as simple as "You will need to call the .NET methods for the Word find/replace functionality. Please ask in the Word forums for the correct method to use.
If you need help on calling .NET methods look HTTP ://here"support you offered combined with the contempt you offer in response to my actual substantive help to the actual question asked.
BOFH, you are not better than us, just more arrogant.
Can you please start your own question as this one has been closed. Please see scripting guidelines.
We cannot guarantee you satisfaction as this is a user supported forum. The is no SLA for community support. Perhaps if you posted a better worded question as a new topic someone might be able to help you resolve your issue.
The topic you are posting on is closed and answered.
¯\_(ツ)_/¯

Search .docx and replace text with image

I've got a directory containing a series of images. The images will always be the same name and I need to insert them into placeholders in a Word document which will be a template. I thought of using the image names as placeholders, opening the document
and searching for the image name, replacing it by inserting the image, and doing so for each image in the directory.
$file is the name of the image in the directory and it loops through them okay.
foreach($file in Get-ChildItem $savepath -Filter *.jpg)
# search word doc and replace selected text with image ($file)
Also inserting the image seems simple enough from a TechNet article I found, but I've got no idea how to open the Word document and do a search and replace. I found a few articles related to the subject but I couldn't get them to work when I tried to adapt
them.
Any help is appreciated. Thanks in advance.

This 'might' be possible, but I'm having a hard time finding good references to the com object capabilities for inserting an image into a word document. Creating new, converting format, that sort of thing is straightforward.
I'd do a search on "powershell word comobject" and variations of insert image update edit, etc. Or maybe someone else with more experience/knowledge has a magic bullet for you. Once you get some info on doing it with powershell, expand
your search by omitting the powershell keyword, there's gotta be some solid documentation for the comobject somwhere, but it will probably be a bit complex.
You can also:
$word = new-object -comobject word.application
$doc = $word.documents.add("<path to word document>"
and get-member to your heart's content, but finding references and/or documentation might be easier.
Good luck!
Edit: This could help, but really doesn't give much insight into placement of the image, only helps getting the image into the doc: http://gallery.technet.microsoft.com/office/44ffc6c8-131f-42f1-b24b-ff92230b2e0a
If you do find something useful, post it here, I'm sure others could benefit!
SubEdit: Should have thought of this already...
http://msdn.microsoft.com/en-us/library/ff837519(v=office.14).aspx

Possible to scan a document into Acrobat XPro,then replace part of that PDF with text or image file?

Hi everyone,
Is it possible first to scan a paper document into Acrobat X Pro, and then to replace a "pane" or box within that PDF with a text or image file?
Would it require SDK and Javascript?
Thanks,
Rick Weinhaus

CtDave and others:
Here's the problem in more detail.
I am a physician and I already have the ability to incorporate paper-based
documents into an electronic health record (EHR) by scanning them and
saving them as PDFs. The documents are paper patient encounter forms with
a different box or 'pane' for each category of data. Each box has a fixed
location on the paper form.
There are three situations, however, where I want to have the option to
overwrite certain boxes of the PDF with data generated by methods other
than scanning.
1) Insert text macros with variable fields using the electronic health
record's software.
2) Insert a drawing available as a pre-existing JPG or generated by using a
tablet.
3) Insert text generated using Dragon Naturally Speaking.
For efficient office workflow, in all three cases the text or image to be
inserted into the box or 'pane' in the PDF needs to be generated while I am
still seeing the patient -- that is -- before the paper form has been
scanned and converted to a PDF.
The sticky note tool is one option, but I would want to be able to modify
the default size of the sticky note so that it corresponded exactly to the
size of the box it was 'overwriting.' I can't figure out how to do this?
Could it be done using scripting?
Furthermore, I would want the sticky notes to automatically display when
the PDF was opened, so that a hover would close rather than open them. This
sticky note method would have the advantage of allowing the user to toggle
back and forth between inserted data and any original handwritten text.
Any thoughts?
Rick

Can we replace OTR text with Images?

Hi All,
I just wanted to know can we replace OTR text with Images?
or
Can we define an image as an OTR text? so that it can be placed in the page where OTR text is used.
regards...
Ravi

Hi Ravi,
it is possible to replace an OTR Text with an image.
You first have to define the Link in the OTR Text where your image is located. This can be everywhere in the Internet or better on a secured intranet server which everyone can reach easily without permission problems. Maybe in the DMZ.
You can even link it into the MIME Repository of your SAP System as well.
Then you have to put that OTR Text into a
<htmlb:textview> Tag and ensure that the switch
" encode = "TRUE" is enabled.
Well thats all.
Keep in mind that the a different language, set in the Internet Explorer or other viewing instances, disables the link if it not "translated" into that language.
This can also be an advantage if you got multilingual fixed pictures with drawn text in it.
I suggest you put all your links ( with a Value Field and at least a name field) into a seperate table into the repository for easy maintaining.
Greetings,
Dominik
Edited by: Dominik Lemke on Dec 19, 2007 12:02 PM

Installed update (11.0.08). App still crashes if I try to edit text and images. Any help?

Installed update (11.0.08). App still crashes if I try to edit text and images. Any help?
1)Specs: Alienware M17 R4 (laptop)
GPU: GeForce GTX 675M
CPU: Intel(R) Core(TM) i73840QM CPU @ 2.80GHz
Memory: 16GB RAM (15.89 GB available)
Resolution: 1920 x 1080, 60Hz
OS: Windows 7 home premium
2) There is no error message. Acrobat simply closes on me without warning. The program stays open for a brief time, but then closes at random.
3) I have tried running it as an admin, but it does not change anything. The program still closes without my consent.
4) I have tried installing and reinstalling multiple times. It does not work even if I do not get the update (11.0.08)
Thanks,
hiimwill

In that case we might want to have a look at the crash logs to check what is failing.
How to create a user-mode process dump file in Windows Vista and in Windows 7
http://support.microsoft.com/kb/931673
Also please be aware that if you are using a 64-bit system you need to follow a different procedure to collect the DMP file to avoid us getting this error from the IDE when attempting to view the file “Debugging a 64-bit dump of a 32-bit process is not supported, please collect a 32-bit dump of a 32-bit process."
You can get the correct dump by going to the location referenced in this blog excerpt:
http://blogs.msdn.com/b/amb/archive/2011/05/12/do-not-collect-32bit-process-dumps-with-64b it-task-manager.aspx
So, you need to use 32bit debugger, if you would like to collect a dump of a 32bit process. So, if your process is 32bit, then you need to run 32bit version of the task manager on a 64bit OS. 32bit task manager is located in C:\Windows\SysWOW64 folder and the name of the file is taskmgr.exe.
Regards,
Rave

Help Me Understand: Readabilty of Text in Images

I make a webcomic (CarpeChaos.com for examples), so I produce a lot of images with a fairly extensive amount of text in them. I want to make sure the fonts in those images are as readable as possible. My experience on this topic is just someone who has read a lot about it online, I'm not professionally trained, so some of my assumptions may be flawed, please point them out. I'm using CS2, but my copy of CS5 is in the mail.
Photoshop is the core of our workflow and our PSDs are set up as several layers of image data and several layers of text. We don't rasterize the text at any point. The text is almost exclusively high contrast grayscale (aka black text on white backgrounds). Each PSD is 2880x3240, but we publish at 960x1080 AND 640x720.
What I know about font rendering tells me that fonts are rendered differently at different sizes, and that scaling rasterized text in images smears them into horrible messes.
With that in mind, I've been a bit of a fascist when it comes to our image mastering process. I never flatten text layers, nor rasterize the text in any other way. My assumption is that Save For Web... in Photoshop does the smart thing by resizing first, then rasterizing the text. Therefore, I use the "Image Size" tab in Save For Web dialog to produce the right sized images. Our jpeg compression is usually between 67% and 87%, although on rare occasion it can go as high as 100%. This produces rather crisp text with about as good of readability as I can hope for in a jpeg.
Unfortunately, this process takes a fair amount of time, and I'd love to dump all our PSDs into a script that generates the jpegs automatically. I've been playing around with File-->Scripts-->Image Processor but haven't yet gotten results that match doing it by hand. And frankly, from the dialogs, I don't trust that it respects my vector fonts as much as I do.
I'm not opposed to switching image formats to png or something else, it just needs to be web friendly.
So I have two questions for the wisdom of this forum:
1) Do you know any way that I can improve readability over what I'm currently doing?
2) How can I get the same results with less work? Is there a way I can get optimal results from an image processor script?

I often use layer styles to make text more readable. Drop shadow and outer glow are often very useful for this, and they don't have to be turned all the way up to greatly increase readability.
For example, for the back jacket of a book, I was putting some light text on a mostly dark background consisting of an image with a lot of stars in it. The letters occasionally overlaid or nearly overlaid stars, and this became kind of distracting. Some drop shadow isolated the text and kept the appearance of the star field intact.
-Noel

Script for replacing Image from a frame into InDesign document file

Hi All,
I am having an indesign document (indd) file with images and texts. I am using InDesign Server CS4 to run the scripts via SOAP.
My requirement is to replace any of the images from the required frame/s of indesign document through scripting (I already have frame id of which image needs to be replaced). I have written written java-script file (as given below): but when I execute this java-script on InDesign Server via SOAP, I get follwoing error into InDesign Server:
10/03/09 15:15:54 INFO [javascript] Executing File: \\Server_IP_Address\JavaScript_File_Path\JavaScript_File.js
10/03/09 15:16:01 ERROR [link manager] Link missing.; file:C:/help.gif
10/03/09 15:16:01 ERROR [link manager] Link missing.; file:C:/Documents%20and%20Settings/All%20Users/Documents/My%20Pictures/Sample%20Pictures/ Water%20lilies.jpg
10/03/09 15:16:01 ERROR [link manager] Link missing.; file:C:/Documents%20and%20Settings/All%20Users/Documents/My%20Pictures/Sample%20Pictures/ Winter.jpg
Following is the java-script that is being used for replacing image from indd's frame:
var myDocument = app.open(File('//Server_IP_Address/InDesignDocument_File_Path/Sample.indd'));
var tmp_frmid="1339"; //frame id of which image needs to be replaced.
for (var i=0;i<myDocument.pages.length;i++)
var objPage=myDocument.pages.item(i);
var objPageitems = objPage.pageItems;
try
var obj = objPageitems.itemByID(tmp_frmid);
obj.images[0].remove;
obj.appliedObjectStyle = null;
var myImage=obj.place(File('//Server_IP_Address/Images_to_be_reolaced_Path/ImageFile.jpg'));
var old_height = myImage.geometricBounds[2] - myImage.geometricBounds[0];
var new_height = obj.geometricBounds[2] - obj.geometricBounds[0];
var old_width = myImage.geometricBounds[3] - myImage.geometricBounds[1];
var new_width = obj.geometricBounds[1] + ((new_height / old_height) * old_width);
myImage.geometricBounds = [obj.geometricBounds[0] + "mm", obj.geometricBounds[1] + "mm", obj.geometricBounds[2] + "mm", new_width + "mm"];
var diff = obj.geometricBounds[1] - myImage.geometricBounds[1];
myImage.move( undefined, [diff,0] );
break;
catch(e)
myDocument.save('//Server_IP_Address/InDesignDocument_File_Path/Sample.indd');
var previewFile = File('//Server_IP_Address/Images_to_be_reolaced_Path/ImageFile.jpg');
app.jpegExportPreferences.jpegQuality["JPEGOptionsQuality.low"];
app.documents.item(0).exportFile(ExportFormat.jpg, previewFile);
myDocument.close();
I have very urgent requirement; if anyone have any idea; please suggest me. \
It would be highly appreciable.
Kind Regards,
Prashant.

http://www.automatication.com/selection-to-pdf-script.html
Harbs
http://www.in-tools.com

Replace images on specific layer

Hi,
till now i used the Script-function in InDesign only for "findandchange"-Actions. It works fine and is very time-saving.
Now I would like to replace images on specific Layers, like I do this with textcontent with the "Findandchange"-Script.
Is this possible?
I try to explain...
Example:
- Find all images "image-a1.tif"(path:folder/folder/image-a1.tif) on specific layer "mylayer"(or only activ and not locked layers)
- Replace all this images with this image "image-a2"tif(path:folder/folder/image-a2.tif)
- Find all images "image-b1.tif"(path:folder/folder/image-b1.tif) on specific layer "mylayer"(or only activ and not locked layers)
- Replace all this images with this image "image-b2"tif(path:folder/folder/image-b2.tif)
- Find all images "image-c1.tif"(path:folder/folder/image-c1.tif) on specific layer "mylayer"(or only activ and not locked layers)
- Replace all this images with this image "image-c2"tif(path:folder/folder/image-c2.tif)
Background Info:
These images have all the same size and resolution. They distinguish only in content (english-/france/german elements).
It's a "multilanguage" InDesign-Document. Every "Languagecontent" have its own layer.
Thanks for helping...

Hi,
Yes you can. I.e using dialog box.
It could be like this:
myDoc = app.activeDocument;
myGraph = myDoc.layers.item("graphic").allGraphics;     // modify layer name
for (k=0; k<myGraph.length; k++)
     oldLink = myGraph[k].itemLink.filePath;     //whole path
     oldFileName = File(oldLink).name;              //only file name
    newFileName = myDialog(oldFileName);     // new name is read from dialog
     if ( !newFileName ) continue;                         // if user press "cancel" button - no action
     newLink = File(oldLink.replace(oldFileName,newFileName) );    // replace file names within path
     if (File(newLink) instanceof File)                     // if wrong newLink - no action
        myGraph[k].itemLink.relink(newLink);     //relink graphic
function myDialog(oldName)
    var myWindow = new Window ("dialog", "Replacing images");
    var myInputGroup = myWindow.add ("group");
    myInputGroup.orientation = "column";
    myInputGroup.alignChildren = "left";
    myInputGroup.add ("statictext", undefined, "Old Name: " + oldName);
    myInputGroup.add ("statictext", undefined, "New Name:");
    var myText = myInputGroup.add ("edittext", undefined, ".eps");
    myText.characters = 20;
    myText.active = true;
    var myButtonGroup = myWindow.add ("group");
    myButtonGroup.alignment = "right";
    myButtonGroup.add ("button", undefined, "OK");
    myButtonGroup.add ("button", undefined, "Cancel");
    var OKbutton = myWindow.show ();
        if (OKbutton == 1) myRes = myText.text;
        else myRes = false;
    return myRes;

Why isn't my iTunes store loading properly? It lists everything in text without images, and I can't seem to access the store when I try to search for music or movies etc.

Why isn't my iTunes store loading properly? It lists everything in text without images, and I can't seem to access the store when I try to search for music or movies etc.

1) The best way to relocate the iTunes library folder is to move the entire iTunes folder with all subfolders to the new path, then press and hold down shift as start iTunes and keep holding until prompted to choose a library, then browse to the relocated folder and open the file iTunes Library.itl inside it.
If you've done something different then provide some more details about what is where and I should be able to help.
2) Purchases on the device should automatically transfer to a Purchased on <DeviceName> playlist, but it my depend a bit on whether automatic iCloud downloads are enabled. If there is a cloudy link then the transfer might not happen. You can use File > Devices > Transfer Purchases. In iTunes you should also check out iTunes Store > Quick Links > Purchased > Music > Not on this computer.
3) Backup the device, then immediately restore it. In some cases you need to add a restore as new device into that equation. Obbviously not to be attempted until you're sure all your media is in your library. See Recover your iTunes library from your iPod or iOS device should it be needed.
4) I believe there is complimentary 1 incident 90-day support with hardware purchases, but no free software support for iTunes itself. AppleCare gets you a different level of support.
tt2

Why can't we replace images in photo stream?

Shared photo streams could be great, but it has a big downside because we cannot replace images in it. How many times haven't I uploaded images that I later wanted to edit? But the only way to replace an image is to delete it and upload a new one. It will appear at the end of the stream as a new project, and all comments will disappear.
Please give us a better way to replace images, that makes it possible to keep the original place in the photo stream, and keep the comments.

Hi there Harvest 61,
You may find the troubleshooting steps in the article below helpful.
iCloud: My Photo Stream troubleshooting
http://support.apple.com/kb/ts3989
-Griff W.

How can i copy line with text and image to ms word

When I insert an image in textflow using InlineGraphicElement it works, but when I copy the line with the image to MS Word it copies only the text (not the image).
How can i copy the image to MS Word?

If you want copy formatted text and image to MS Word, you need to give MS Word rtf markup, because Word can recognize rtf markup but not TLF markup.
So you need to create a custom clipboard to paste a rtf markup. It's a large feature for you, because you need a tlf-rtf converter in your custom clipboard.
TLF Custom Clipboard Example:
package
    import flash.display.Sprite;
    import flash.desktop.ClipboardFormats;
    import flashx.textLayout.container.ContainerController;
    import flashx.textLayout.conversion.ITextImporter;
    import flashx.textLayout.conversion.TextConverter;
    import flashx.textLayout.edit.EditManager;
    import flashx.textLayout.elements.*;
    import flashx.undo.UndoManager;
    // Example code to install a custom clipboard format. This one installs at the front of the list (overriding all later formats)
    // and adds a handler for plain text that strips out all consonants (everything except aeiou).
    public class CustomClipboardFormat extends Sprite
        public function CustomClipboardFormat()
            var textFlow:TextFlow = setup();
            TextConverter.addFormatAt(0, "vowelsOnly_extraList", VowelsOnlyImporter, AdditionalListExporter, "air:text" /* it's a converter for cliboard */);
        private const markup:String = '<TextFlow whiteSpaceCollapse="preserve" version="2.0.0" xmlns="http://ns.adobe.com/textLayout/2008"><p><span color=\"0x00ff00\">Anything you paste will have all consonants removed.</span></p></TextFlow>';
        private function setup():TextFlow
            var importer:ITextImporter = TextConverter.getImporter(TextConverter.TEXT_LAYOUT_FORMAT);
            var textFlow:TextFlow = importer.importToFlow(markup);
            textFlow.flowComposer.addController(new ContainerController(this,500,200));
            textFlow.interactionManager = new EditManager(new UndoManager());
            textFlow.flowComposer.updateAllControllers();
            return textFlow;
import flashx.textLayout.conversion.ITextExporter;
import flashx.textLayout.conversion.ConverterBase;
import flashx.textLayout.conversion.ITextImporter;
import flashx.textLayout.conversion.TextConverter;
import flashx.textLayout.elements.IConfiguration;
import flashx.textLayout.elements.TextFlow;
class VowelsOnlyImporter extends ConverterBase implements ITextImporter
    protected var _config:IConfiguration = null;
    /** Constructor */
    public function VowelsOnlyImporter()
        super();
    public function importToFlow(source:Object):TextFlow
        if (source is String)
            var firstChar:String = (source as String).charAt(0);
            firstChar = firstChar.toLowerCase();
            // This filter only applies if the first character is a vowel
            if (firstChar == 'a' || firstChar == 'i' || firstChar == 'e' || firstChar == 'o' || firstChar == 'u')
                var pattern:RegExp = /([b-df-hj-np-tv-z])*/g;
                source = source.replace(pattern, "");
                var importer:ITextImporter = TextConverter.getImporter(TextConverter.PLAIN_TEXT_FORMAT);
                importer.useClipboardAnnotations = this.useClipboardAnnotations;
                importer.configuration = _config;
                return importer.importToFlow(source);
        return null;
    public function get configuration():IConfiguration
        return _config;
    public function set configuration(value:IConfiguration):void
        _config = value;
import flashx.textLayout.elements.ParagraphElement;
import flashx.textLayout.elements.SpanElement;
import flashx.textLayout.elements.ListElement;
import flashx.textLayout.elements.ListItemElement;
class AdditionalListExporter extends ConverterBase implements ITextExporter
    /** Constructor */
    public function AdditionalListExporter()
        super();
    public function export(source:TextFlow, conversionType:String):Object
        if (source is TextFlow)
            source.getChildAt(source.numChildren - 1).setStyle(MERGE_TO_NEXT_ON_PASTE, false);
            var list:ListElement = new ListElement();
            var item1:ListItemElement = new ListItemElement();
            var item2:ListItemElement = new ListItemElement();
            var para1:ParagraphElement = new ParagraphElement();
            var para2:ParagraphElement = new ParagraphElement();
            var span1:SpanElement = new SpanElement();
            span1.text = "ab";
            var span2:SpanElement = new SpanElement();
            span2.text = "cd";
            list.addChild(item1);
            list.addChild(item2);
            item1.addChild(para1);
            para1.addChild(span1);
            item2.addChild(para2);
            para2.addChild(span2);
            source.addChild(list);
            var exporter:ITextExporter = TextConverter.getExporter(TextConverter.TEXT_LAYOUT_FORMAT);
            exporter.useClipboardAnnotations = this.useClipboardAnnotations;
            return exporter.export(source, conversionType);
        return null;

How can i create a simple netweaver portal page that shows text and images?

Hi,
i have a simple question or maybe it's not so simple.
I am completly new to SAP Netweaver 2004s Portal. At the moment i'm trying to understand the struture of the whole thing. I already know how to create roles, worksets and pages and i know how to combine the different elements so a user can acces them.
And now i want to create a simple portal page that shows text and images. Is it possible to create such a simple page with the portal content studio? What iView do i have to use?
(I just want to create a start page with a welcome text on it.)

Marc
Considering that you would any ways go ahead with complex development from this simple start page I recommend create a Web dynpro Iview for your start page (include the Iview in your page).
For putting the contents use Netweaver Developer studio to build a simple start page application and put your static text on that Iview.
Please go through the following log after your NWDS development is over - This will make you comfortable for further challenging work.
http://help.sap.com/saphelp_erp2005/helpdata/en/b7/ca934257a5c96ae10000000a155106/frameset.htm
Do reward points if this helps and let me know of you want anything more.

Text replacing image! HELP!

Similar Messages

Maybe you are looking for