Text required to be inserted as Super script

Hi All,
I have an requirement to insert the long text of MIC in as super script.
E.g. Not More Than 103 CFU/g
Here the bold charecter should be super scripted. just as the °C. I need to represent it as 10 cube (10X10X10)
Pls help,
Regards,
Shyamal
Edited by: Shyamal Joshi on Jul 4, 2008 11:03 AM
Edited by: Shyamal Joshi on Jul 4, 2008 11:04 AM

Not received even a single reply on this question, since closing it !!!!!!!!

Similar Messages

Super-scripted Ref Numbers with generated Ref Table (A Glossary?)

Good Morning All!
I have been trying to create a paragraph style that will be applied manually, but when applied Italicizes and adds a sequential super-scripted "reference number". These reference numbers will then be used to produce a table which will sort rows numerically and produce info based on each reference. I will also need this to delete duplicates. I have a remove duplicates script for my ToC and may be able to retrofit it to this, but we'll get to that later. I can single out words with GREP, but without creating my own "parts dictionary" it would be a pain to add a thousand or so part names* to a GREP. I figured the easiest way to do this would be to manually apply a paragraph or character style per instance and then use a script to remove duplicates. If there is a better way to do this I'm open to suggestions.
*Sadly part names aren't always consistent either due to different writers writing styles.
To keep it simple for now I'm wanting it to just produce: Example Row in Table - [Ref # / Blank cell for part number / Part Name (Text that Ref style was applied to) / Blank cell for description]
Example:
I'm running into a problem that my super script numbers wont sit right if its done through a paragraph style as it reads the entire paragraph. I need the style to apply to a word or group of words. I tried creating a numbering system like a ToC, but once again that works off of paragraph styles. I can manually apply a character style but it doesn't have any sequential numbering options. For right now I'm fine manually applying the style for each instance and then copy/pasting part number and description. I'm just looking for something to generate reference numbers and the name that coincides into a row of a target table. In the future it would be amazing to have it access the component dictionary (excell doc) I'm painstakingly building to grab the part number(s) and descriptions so I don't have to copy/paste.
I have been tasked with making multiple writers write the same thing. It feels impossible btw. So I have been creating an indesign template that does a lot of the work for you so that the largest inconsistencies are now handled by Indesign and leave no room for user error. This will not only help my older writers be consistent but will lessen the learning curve on newbies. Let me know if there is something differently I could be doing or if anything has worked well for you. I am open to any and all help/suggestions, I look forward to hearing back!

Thanks for the quick response Pete. They would need to be created as well.
I was hoping that they would continue on through pages, but not documents (for booked instances). That they would be numbered on the fly so that if you moved pages around they would renumber themselves and then you could run a script to fix the order in the table. I have the sequential numbering scheme down for automatic figure box numbering. I just cant figure out the in-text mid-paragraph numbering. What do you have for me MVP?

How we change a word to Super Script in ADOBE Form

Hi,
I have scenario where I need to change a word to super script. I am getting the super script value in a variable, now When displaying on a abode form in a particular cell I have to concatenate this word and make sure that it appears as Super Script to the word preceding it.
Really appreciate if someone can post suggestions and ideas to do it.
Thank you,
Srikanth

Hi Srikanth,
In case of text field you can do this . Its simple.
You just need to check the rich text property from text field properties
Now you can select any word and change it to superscript by using the corresponding properties button.
Moreover I guess If you create a table and save some data by copying from excel or word as superscriipt it gets saved in table. so you can use this way also.
P.S check this link
http://scn.sap.com/thread/1033300
Regards,
Sandeep Katoch

How to find a text in the Frame maker document via script?

How to find a particular text in the Frame maker document via script?

johnsyns wrote:
Why it doesn't work for the other days? When i tried to change the days other than wednesday. it return nothing.
Reason why Justin's code does not work for other days is date format mask DAY returns day blank padded to 9 characters which is the longest day name which, yes you guessed right, is WEDNESDAY. You either need to blank pad or use format modifier FM:
SQL> select *
2    from (SELECT TO_DATE(SYSDATE+ROWNUM, 'DD-MON-YY') dt
3            FROM DUAL CONNECT BY ROWNUM <= 27)
4 WHERE TO_CHAR(dt,'DAY') = 'TUESDAY'
5 /
no rows selected
SQL> select *
2    from (SELECT TO_DATE(SYSDATE+ROWNUM, 'DD-MON-YY') dt
3            FROM DUAL CONNECT BY ROWNUM <= 27)
4 WHERE TO_CHAR(dt,'DAY') = 'TUESDAY '
5 /
DT
07-APR-09
14-APR-09
21-APR-09
28-APR-09
SQL> select *
2    from (SELECT TO_DATE(SYSDATE+ROWNUM, 'DD-MON-YY') dt
3            FROM DUAL CONNECT BY ROWNUM <= 27)
4 WHERE TO_CHAR(dt,'FMDAY') = 'TUESDAY'
5 /
DT
07-APR-09
14-APR-09
21-APR-09
28-APR-09
SQL> SY.

Error when inserting Web Dynpro script in Adobe form

Hi
In my WD component in one of the view I have an ADOBE form (Online scenario) and a button to save data into backend. In the ADOBE form everything is working properly, however the problem is when I click on the button to save, Its not getting into my action code. Even I am not getting any error other than the wait symbol.
In the form I have taken ZCI layout but when i'm inserting Webdynpro Script its showing an error 'Error when inserting Web Dynpro script'.
Please let me know why this error is getting.
Thanks
Ram

Hi Ram,
I hope you help me,
I have the same error, when I insert a web Dynrp Script, what version of SAPGUI do you use?
Thanks

GR based IV to be checked for free text requirement

Hi All,
Is there any option that if we create shopping carts for free text requirement,GR based IV should be checked automatically in purchase order created for that shopping cart.Or will this get replicated depending on vendor master we select.Please suggest.
Thanks.

Hi,
As of standard, this setting in PO would come from Vendor master only. But in case you want this to happen for all free text items, then you can use the doc change badi as suggested by Masa. You should use the po change method to pass this indicator.
Regards,
Sanjeev

Error when inserting Web Dynpro script

Hello,
I am trying to create a new form using fields from KNA1 and am using ISR controls. When I try to insert Webdynpro scripts i get message "Error when inserting Web Dynpro script" Message no. FPUIFB094.
Has anyone faced this error? no notes are available regarding this and in SDN.
Regards
Prasad

It must be atleast ALD 7.1. Check this [Thread|Re: Problem on Button; having the same issue. Also check the SAPNOTE 962763.

Problem: insert images by script

Hello.
I have problem with insert images from script like this: <& "H:\P1010014.tif">.
After insert all images are square :(
But i need its own sizes and proportions.
P.S.: i can`t write in tag width and height because in all images its different

Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web site development issues with Firefox. <br />
http://forums.mozillazine.org/viewforum.php?f=25 <br />
You'll need to register and login to be able to post in that forum.

Error inserting Web Dynpro Script

Hello Word,
I have a problem when I try to insert the web dynpro script, sends a messages "Error inserting Web Dynpro Script", any idea?
sorry about my english
Christian..

Chintan Virani, Thaks for the answer
The Disigner version is 7.1 (ALD 7.1), I am trying to create Interective Forms with Web Dynpro in ABAP.
I read in some palce that upgrading the sap GUI resolve the problem but I have the 710 version sap GUI (I suppose it's the last version) but this do not resolve the problem.
can you help me please, thaks
Christian

When i am tring to insert the option Utilities- Insert Web Dynpro Script

When i am tring to insert the option Utilities->Insert Web Dynpro Script
I am getting the error like Error when inserting webdynpro script thats it.
Can you please help me in this.

If you are getting an error when inserting the script, make sure that you have set the Layout Type on the properties tab of the form to ZCI Layout. If the problem persists you should enter a support ticket, as such an error is not a normal occurance.

Insert variables from script into HTTPService url

I'm trying to insert values from script into a HTTPService
url. How do I go about doing this? I tried the code below, but it
gives an error. Can anybody help?
<mx:HTTPService
id="httpCall"
url="
http://api.service.com/user/{userName}/list?count={apiCount}&offset={(apiOffset)}&sort={ap iSort}&appkey=1234"
resultFormat="e4x"
result="callHandler(event);"
fault="httpFaultHandler(event);"
showBusyCursor="true"
/>
<mx:Script>
<![CDATA[
import mx.controls.Alert;
import mx.rpc.events.FaultEvent;
import mx.rpc.events.ResultEvent;
[Bindable]
private var userName:String = "myName";
private var apiCount:uint = 10;
private var apiOffset:uint = 0;
private var apiSort:String = "desc";

Set the HTTPService properties in an AS function.
<mx:HTTPService id="httpCall" resultFormat="e4x" ...
result="callHandler(event);" ...../>
private function getUserData():void
var sURL:String = "
http://api.service.com/user/"
_ userName + "/list:;
var oRequest:Object = {count:apiCount,offset:apiOffset,
sort:apiSort, appkey:"1234" }
httpCall.url = sURL;
httpCall.send(oRequest);
Tracy

I purchased my IPHONE 4S in canada particularly in Vancouver. i live in italy. my device displays "ACTIVATION REQUIRED". i also inserted my SIM card but my phone does not accept it. what shall i do?

i purchased my IPHONE 4S in canada particularly in Vancouver. i live in italy.
my device displays "ACTIVATION REQUIRED". i also inserted my SIM card but my phone does not accept it. what shall i do?
thank you and regards,
roger
<E-mail Edited by Host>

You're phone is locked to a carrier. You will need to contact the carrier you got you're phone from to have them unlock it.

In Firefox (latest version) on Craigslist the text font is a very funky super bold angular font I can barely read. When using safari it's ok using times. is this a firefox problem?

In Firefox (latest version) on Craigslist the text font is a very funky super bold angular font I can barely read. When using safari it's ok using times. is this a firefox problem?

You can do a check for corrupted and duplicate fonts and other font issues:
*http://www.thexlab.com/faqs/multipleappsquit.html - Font Book 2.0 Help: Checking for damaged fonts
*http://www.creativetechs.com/iq/garbled_fonts_troubleshooting_guide.html

HT2488 How to I insert text into a this command in automator wine "Text goes here" this is a perl script

I have spent hours trying to figure this out, automator is the hardest thing to figure out. All I want to do is emulate me doing this
-Open terminal
-type wine
-drag and drop the location of an .exe file
-hit enter
Now this should be easy as all I have to do is do run shell script, insert argument and done, BUT IT DOESNT RECOGNIZE WINE!?!?! Pleas help me.
Let me clarify.
If I make an automator application that that runs the command "wine" and then inserts text into the space after that Then i will be set. But no matter what I do nothing works. If i set the shell to perl and pass input as argument....It doesnt work the $f and $@ stuff doesnt work.
Wine is likely not recognized because is is pearl based so I set it to pearl, but how do i pass and argument over to it?

Try
/opt/local/bin/wine "$@"
The "..." will protect the white space, but still allow $variable subsitutions.
The $@ will substitute all the files you drag as a group to your Automator app.
The notation "$@" does the substitution with each file properly quoted to protect the white space in the file path, but provide each file as its own quoted argument to the 'wine' command line.
If you need to invoke 'wine' once for each file of a group of files you drag on to your automator app, then use
for f in "$@"
do
/opt/local/bin/wine "$f"
done
This will loop through each file of a group of files you drag onto your automator app, and invoke 'wine' once for each file in the group.

How to enter super script inspection characteris long text

Dear All,
our user want to enter 10 to the power of 4 ,or upto 10 to the power of 9 in inspection characteristics long text, kindly guide me for the same.
Rgds,
Mani

Hello Manish,
I think the following thread in QM forum has the solution to your question.
Re: Subscript in long text
Regards
Prasad K

Text required to be inserted as Super script

Similar Messages

Maybe you are looking for