Text searching
I will need to search on text such as 2A.2B. I have looked into the basic_lexer information and at the printjoins, numjoins and the punctuation.
The files we will be searching are pdf. The printjoin capability works on txt files correctly, but does not work with pdf files. Pdf files do not return DOG.DOG as is shown in the documentation using the printjoin.
The closest search appears to be to search on '2A 2B' with no changes to the basic_lexer when searching for the text '2A.2B'. We can find 'dog cat' or 'dog.cat' with no changes to the lexer. We can only find '2A 2B', not '2A.2B' with no changes to the lexer.
Could anyone verify that a search can be made on '2A.2B' for pdf files.
Are there any other ideas?
Thanks so much.
null
I had tried to take the period out of the punctuation and I still did not get
2A.2B, but I would get other things that I did not want.
Following is our use of the printjoin:
begin
ctx_ddl.create_preference('mylex','BASIC_LEXER');
ctx_ddl.set_attribute('mylex','printjoins','.-');
end;
Following is a copy of the index code:
DROP INDEX myindex;
CREATE INDEX myindex
on bf_docs (doc)
indextype is ctxsys.context
parameters('datastore COMMON_DIR LEXER mylex');
Following is a copy of the text of our pdf file:
2B.2B
2A.2a
2A.
This is a test of Intermedia indexes. Can I search for flight numbers.
Flight 2A.2B
Flight 2A.2A
DOG.CAT
CAT.DOG
Cat.dog
Dog.cat
Rat.monkey
CANDY.POPCORN
After I have run the index for this file,
I cannot search for:
SELECT DOC_ID FROM BF_DOCS WHERE
CONTAINS(DOC,'CANDY.POPCORN')>0
I can search for CANDY or POPCORN, but not CANDY.POPCORN
OR
2A.2B
Following is the dr$myindex$i results. The term candy.popcorn is saved separatly as candy and popcorn.
ORAD> SELECT TOKEN_TEXT FROM DR$MYINDEX$I WHERE TOKEN_TEXT LIKE '%CANDY%'
2 /
TOKEN_TEXT
CANDY
ORAD> C/CANDY/CANDY.POPCORN/
1* SELECT TOKEN_TEXT FROM DR$MYINDEX$I WHERE TOKEN_TEXT LIKE '%CANDY.POPCORN%'
ORAD> /
no rows selected
null
Similar Messages
-
How can I use ONE Text search iView to event/affect mutliple Result Sets?
hello everyone,
i have a special situation in which i have 6 flat tables in my repository which all have a common field called Location ID (which is a lookup flat to the Locations table).
i am trying to build a page with a free-form text search iView on Table #1 (search field = Location ID). when I execute the search, the result set for Table #1 is properly updated, but how do I also get Result Set iViews for Tables #2-6 to also react to the event from Text Search for Table #1 so that they are updated?
i don't want to have to build 6 different text search iViews (one for each table). i just want to use ONE text search iView for all the different result set tables. but, in the documentation and iView properties, the text search iView doesn't have any eventing.
if you have any suggestions, please help.
many thanks in advance,
mmhello Donna,
that should not be a problem, since you are detailw with result sets and detail iviews because custom eventing can be defined for those iviews.
Yes, it says "no records" found because an active search and record selection havent' been performed for it (only your main table does).
So, yes, define a custom event, and pass the appropriate parameters and you should be fine.
Creating a custom event between a Result Set iView and an Item Details iView is easy and works. I have done it.
See page 35 of the Portal Content Development Guide for a step-by-step example, which is what I used.
For my particular situation, the problem I'm having is that I want the Search Text iView's event (i.e., when the Submit button is pressed) to be published to multiple iViews, all with different tables. Those tables all share some common fields, which is what the Search iView has, so I'd like to pass the search critera to all of the iViews.
-mm -
Does anyone know how to do a text search in the new Safari for iPad iOS 7?
Does anyone know how to do a text search in the new Safari for iPad iOS 7?
The feature has been removed to make safari even less useable. You need to download a third party browser like atomic web browser to get the functionality you want back.
Like many new IOS 7 "features", safari on the ipad is a FAIL.
At least you can now bury safari in a folder containing hundreds of icons that you can only view 9 at a time. -
Old contacts showing up in siri and text search results but not in contacts list.
So what I did was this. I had mobile me, and iphone ocntacts as well as contacts on phone. After updating to IOS5, i had tripples of almost all my contacts (but not all). I converted my mobile me to icloud to discover i couldnt use that email under my new official icloud accoutn as my @me.com adress. So what i did was this. I deleted my old mobile me (now icloud account) compleatly from my phone, my iPad and my computer so there is no trace of it. I then went to my new iCloud account (that i will now use as my only icloud account. going to let the old mobile me one just die so i have 1 central spot for all my stuff). Now all my contacts are gone. So to start fresh and just be done with the confusion, i go to www.icloud.com and manually (by hand) re type in all my contacts. I updated some info and changed some names (like nicknames and stuff like that to real names). Basiclly compleatly organizing my contacts and such to the way i want them. Getting rid of poeple i no longer talk to and such. I did it, it syned and all was well. However now here is hte problem.
If i go to spotlight search, or text search, or search with siri, or any type of search function, all of my old contacts are still there and viewable. All the ones i wanted to get rid of are all still there. However, if i go to contacts and look for thoes old contacts, they are not in the contact list (yes iv checked every "group" and also "all contacts" in groups). What i want is to figure out how to get all of these old contacts compleatly deleated so they dont show up anywere on my phone. Especially with siri its making searches and auto calling more difficult because its finding two contacts sometimes that are the same person and asks me to distinguish instead of jsut calling. CAn anybody help?
Sorry for the wall of text, wanted to make sure to give as much info on the specifics as possible so hopefully i can get this resolved. Is this a bug or something i did wrong? can i fix it or do i just have to wait for an update?
P.S.
Iv since upgraded to iphone 4S and still happening. Also this does NOT happen on my iPad. Only my iPhone.Talked to AppleCare for about an hour. After trying many steps: deleting contacts, re downloading from cloud, disabling Siri and re enabling, even Reset all Settings. Nothing worked. Ended up having to restore the phone via Erase All Content and Settings. That of course fixed it.
Not sure what the issue was. I did have a Mobile Me account before the iCloud migration. For some reason, my contacts would appear in Contacts on the phone and in the cloud only once, but when using Siri it would list 2 or 3 duplicate contacts. Also after we deleted all the contacts on the phone, did an iPhone reset (Home and On/off buttons), my contacts list would show empty. Then I would click on Groups and poof all of a sudden duplicate or triplicate contacts would be in the contacts list.
Very strange. -
Full-Text search is not working with PDF files - SQL Server 2012 64 bit
Hi,
We are in the process of storing PDF files in SQL Server 2012 with Full-Text search capability.
I followed the steps as below and it works fine with word document but not for PDF files. I tried with PDF ifiler 11 & 9 and both are unsuccessful.
Server/DB Level Settings:
1)
Enable FileStream
2)
Install Full-Text
then restart
3)
Use [specific db]
alter
database [db name]
add
filegroup Files
contains filestream;
alter
database [db name]
add
file (
name = N'Files',
filename =
N'D:\SQL\DATA') to
filegroup [Files];
3)
Database level
Settings:
FileStream:
FileStream
Directory name:
[Set the name]
FileStream
non-transacted
Access: [set Appropriate]
3a)
Add a
datafile to DB
with filestreamdata
filetype.
4)
Share D:\SQL\DATA
directory and
add specific accounts
with read/write
access
5)
Give bulkadmin
access to those
specific accounts
at server
level
6)
From the
page (link)
download and
install the *.pdf
IFilter for
FTS. Link:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5542
7)
To the
PATH global system
variable add
path to the
catalog,
where you installed
the plugin.
Default for
this version is:
C:\Program
Files\Adobe\Adobe
PDF iFilter 9
for 64-bit
platforms\bin
8)
From the
page (link)
download a
FilterPackx64.exe
and install
it. Link:
http://www.microsoft.com/en-us/download/confirmation.aspx?id=20109
9)
Now from
SSMS execute the following
procedures:
-sp_fulltext_service
'load_os_resources',1
-sp_fulltext_service
'verify_signature', 0
EXEC
sp_fulltext_service
'update_languages';
-- update language list
EXEC
sp_fulltext_service
'restart_all_fdhosts';
-- restart daemon
reconfigure
with override;
10)
Restart the
server
11)
select document_type,
path from
sys.fulltext_document_types
where document_type
= '.pdf'
-select
document_type,
path from sys.fulltext_document_types
where document_type
= '.docx'
12) Results are OK.
Following is my Table /Index/ catalog script:
CREATE
TABLE dbo.DocumentFilesTest
DocumentId INT
IDENTITY(1,1)
NOT NULL
PRIMARY KEY,
AddDate datetime
NOT NULL,
Name nvarchar(50)
NOT NULL,
Extension nvarchar(10)
NOT NULL,
Description nvarchar(1000)
NULL,
FileStream_Id UNIQUEIDENTIFIER
ROWGUIDCOL NOT
NULL UNIQUE DEFAULT
NEWSEQUENTIALID(),
FileSource varbinary(MAX)
FILESTREAM DEFAULT(0x)
go
--Add default add date for document
ALTER
TABLE dbo.DocumentFilesTest
ADD CONSTRAINT
DF_DocumentFilesTest_AddDate
DEFAULT sysdatetime()
FOR AddDate
EXEC
sp_fulltext_database
'enable'
GO
IF
NOT EXISTS
(SELECT
TOP 1 1 FROM sys.fulltext_catalogs
WHERE name
= 'Ducuments_Catalog_test')
BEGIN
EXEC sp_fulltext_catalog
'Ducuments_Catalog_test',
'create',
'D:\SQL\PDFBlob';
END
--EXEC sp_fulltext_catalog 'Ducuments_Catalog_test', 'drop'
DECLARE
@indexName nvarchar(255)
= (SELECT
Top 1 i.Name
from sys.indexes
i
Join sys.tables
t on
i.object_id
= t.object_id
WHERE t.Name
= 'DocumentFilesTest'
AND i.type_desc
= 'CLUSTERED')
PRINT @indexName
EXEC
sp_fulltext_table
'DocumentFilesTest',
'create',
'Ducuments_Catalog_test',
@indexName
EXEC
sp_fulltext_column
'DocumentFilesTest',
'FileSource',
'add', 0,
'Extension'
EXEC
sp_fulltext_table
'DocumentFilesTest',
'activate'
EXEC
sp_fulltext_catalog
'Ducuments_Catalog_test',
'start_full'
ALTER
FULLTEXT INDEX
ON [dbo].[DocumentFilesTest]
ENABLE
ALTER
FULLTEXT INDEX
ON [dbo].[DocumentFilesTest]
SET CHANGE_TRACKING
= AUTO
ALTER
FULLTEXT CATALOG
Ducuments_Catalog_test REBUILD
WITH ACCENT_SENSITIVITY=OFF;
INSERT
INTO DocumentFilesTest(Extension,
Name,
FileSource)
SELECT
'pdf'
'BOL12006553.pdf'
* FROM
OPENROWSET(BULK
'd:\SQL\PDFBlob\BOL12006553.pdf',
SINGLE_BLOB)
AS BLOB;
GO
INSERT
INTO DocumentFilesTest(Extension,
Name,
FileSource)
SELECT
'docx'
'test.docx'
* FROM
OPENROWSET(BULK
'd:\SQL\PDFBlob\test.docx',
SINGLE_BLOB)
AS Document;
GO
SELECT
d.*
FROM dbo.DocumentFilesTest
d WHERE
Contains(d.FileSource,
'BILL')
Returns nothing. it should come from PDF file
SELECT
d.*
FROM dbo.DocumentFilesTest
d WHERE
Contains(d.FileSource,
'TEST')
Returns from word document as follows:
2 2014-06-04 10:11:41.393 test.docx docx
NULL [BINARY Value] [Binary Value]
Any help is appreciated. Its been a long wait.
Thanks,
Vel
Vel ThavasiHello,
Did you check the fulltext log files for more details about the errors. If the filter isn’t working, there should be errors in the error log file.
The following thread is about similar issue, please refer to:
http://social.msdn.microsoft.com/forums/sqlserver/en-US/69535dbc-c7ef-402d-a347-d3d3e4860d72/sql-server-2008-64bit-fulltext-indexing-pdf-not-working-cant-find-ifilter
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support -
Interactive Report - Include Non-selected Column in Row Text Search
Hi,
We have an interactive report that contains many columns. NAME VARCHAR2(30), TYPE VARCHAR2(30) etc and DESCRIPTION VARCHAR2(4000).
Normally the DECRIPTION column would not be shown (avalilable for dispaly via 'Select Columns' but not selected), however we need the default Row Text Search (ie direct entry into the search field instead of creating a column filter) to search the DESCRIPTION field wether it is selected for display or not.
This will allow the user to enter a term that may be contained in the DESCRIPTION to find records without trying to display a 4000 character field in the report - which just looks horrible.
We are using ApEx 4.1.1.
Thanks,
Martin FiggHi Ray,
As I expected this has got us very close. We went with the code:
select
facility_id,
facility_name,
'<span title="' || facility_desc|| '">'||substr(facility_desc,0,50)||decode(sign(length( facility_desc)-50),1,' (More...)',NULL)||'</span>' facility_desc,
equipment_id,
equipment_name,
'<span title="' || equipment_desc|| '">'||substr(equipment_desc,0,50)||decode(sign(length( equipment_desc)-50),1,' (More...)',NULL)||'</span>' equipment_desc,
from
rf_full_item_list_vwhich works well. The only issue is that when you download to csv you get the html tags etc as well. Put I am a lot closer to a solution than we were.
Thanks again.
Martin -
How can I get the text search to work in my Robohelp 7 .chm?
The text search used to work but has stopped working.
The compile says it is "Generating full-text search data..." and I'm getting no errors.
This .chm is part of a merged .chm. The other merged .chms still have seaching ability.
I'm wondering if perhaps I'm running out of space. The .chm is 5,327 KBI gave up and repaired Robohelp 7. Now the text search works again. One possibility is that I damaged Robohelp 7 when I installed a trial copy of Robohelp 9 and then uninstalled the trial copy. Don't know for sure and I'm not willing to try it again just to find out. I'm just happy that I've got it working again.
-
Can I have a Text Search in HTML Help output?
Hello,
I'm relatively new to Robohelp and while testing the possible output methods I found that there is no internal text search function available for the Microsoft HTML Help (.chm) file.
Does anyone know if it is possible to enable this function?
Thank you
HolliHi Holli
Perhaps try creating a brand new window?
Make sure Microsoft HTML Help is your Primary Layout by right-clicking it in the Single Source Layouts recipe box.
Then open the Project Set-up pod and create a new window.
Then in the Single Source Layout recipe, make sure you choose the new window you just created.
Recompile and check.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks -
TREX/Content Server: Full text searches not working
I've setup TREX and Content Server in a sandbox environment and have been trying to get my head around DMS. I've completed what I've believed are the required steps (outlined below) and I have submitted 12 documents of various types into the respository. I'm able to perform meta data searches but not full text searched. Any ideas what I might have missed?
Much thanks!!!!
/Greg
0. Defined connection to TREX Server: TREX_42 (SM59); Using TREXADMIN all services are green.
1. "Define Document Area" - DMS is present; assumed I would use this one.
2. "Defined Indexing Readiness" - selected "Index Release" & "Classify" for DMS; set "Search Srv" to DMS_TEST
3. "Define Content Respository" - Created Z_CR_001 and maintained it as follows:
- Documentation Area: Document Management System
- Storage Type: HTTP content server
- HTTP Server: srv-sptxd2-dal.intervoice.int (content server)
- Port: 1090
- HTTP Script: ContentServer/ContentServer.dll
- Physical Path: /usr/sap/IRD/SYS/global/
4. "Define Content Categories" - Created ZCSSTRUCT; maintained as follows:
- Document Area: DMS
- Content Rep: Z_CR_001
5. Checked CSADMIN for Z_CR_001 - All Green
6. Went into SKPR07 (monitoring tab); entered DMS_PCD1 and "Indexing possible", "Auto indexing" and "DocArea activated" is all green.
7. Went into SMRO
- created SSR: "Search Server ID" = DMS_TEST, "Search engine" = DRFUZZY
- Verified "RFC Destinations"; passed tests; all green.
8. Went into SKPR07; using DMS_PCD1 as document class.
- executed "Clean up table entries"
- deselected "Limited to selected language"
- executed reindex. "Copied successfully from search engine"
- Selected the created index category
- Set the "Document area" indicator
- execute "Trigger process"; 12 documents referenced
9. Going into TREXADMIN I can see the created index; however the document count = 0. Also there is no queue created -- should there be?
Edited by: Greg Preston on Aug 5, 2009 9:11 PMDear
this link will help you,
TREX Architecture
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/71/b26b2bfdc4eb47ab5432e8444290ce/content.htm
File Formats Supported by TREX
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/55/cb634114b78047e10000000a1550b0/content.htm
Detail about TREX Configuration (Basic to advance)
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/46/bab1d48b0a1514e10000000a114a6b/content.htm
Regards
Tushar Dave
Edited by: Tushar Dave on Aug 6, 2009 9:59 AM -
Hello,
I am trying to install Microsoft SQL Server 2008 R2. I get the error bellow (Database Services Engine Failed, SQL Server Replication Failed, Full Text Search Failed, Reporting Services Failed). I already have a copy of SQL Server 2008 R2 on the machine.
I want to create a new named instance of SQL Server for some software I'm installing.
The error is below.
Any help would be much appreciated, thanks!
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -595541211
Exit facility code: 1152
Exit error code: 49957
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2014-02-06 09:14:09
End time: 2014-02-06 11:18:16
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.2500.0%26EvtType%3d0x44D4F75E%400xDC80C325
Machine Properties:
Machine name: BAHPBZ52TY
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2008 R2 SQLEXPRESS MSSQL10_50.SQLEXPRESS Database Engine Services
1033 Express Edition 10.50.1600.1 No
Sql Server 2008 R2
Management Tools - Basic 1033 Express Edition
10.50.1600.1 No
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
Installation location: c:\c7ced2c86d6b9813b28186cc831c2054\x64\setup\
Installation edition: EXPRESS_ADVANCED
Slipstream: True
SP Level 1
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: True
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE:
CUSOURCE:
ENABLERANU: True
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,RS,SSMS,SNAC_SDK,OCS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: c:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: c:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: aedt2bSQL
INSTANCENAME: AEDT2BSQL
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE: c:\c7ced2c86d6b9813b28186cc831c2054\PCUSOURCE
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: BAH\568385
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
UIMODE: AutoAdvance
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: SQL Client Connectivity SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: Management Tools - Basic
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Microsoft Sync Framework
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\SystemConfigurationCheck_Report.htmHello,
If you see error descriptioon it gives access denied so basically it is because of some access issue.I guess You must be using some domin account for installation make sure it is added as local administrator also instead of using NT Authority network
service as SQL server service account use local system account .
Below link would help
http://serverfault.com/questions/212135/access-is-denied-error-installing-sql-server-2008-on-windows-7
You can also browse to setup.exe file and RK on it and select run as administrator
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
I have downloaded JavaHelp using Sun Download Manager (download and extract JavaHelp) to activate Full-text Search in RoboHelp. But, while generating Help in RoboHelp, I get an error that JavaHelp is not installed. I am not able to understand how to Install JavaHelp. Please help.
That's the way it worked in X4 and later versions up but not including RH8. RH8 includes phrase searching in webhelp.
See www.grainge.org for RoboHelp and Authoring tips -
How to configure what is displayed in srfDocSnippet (Oracle Text Search)?
I am using UCM 10gR3 with SiteStudio 10gR4. I installed the Oracle Text Search component and it is working well. One of the requirements for a search results page is the specific layout of the data displayed. srfDocSnippet returns a really ugly display if the search result return is just metadata. I didn't find any documentation in UCM on how to configure this display.
How to you configure what is displayed in srfDocSnippet?
Thank you,
KenHow To get the Summary from CIS on Document Objects (Doc ID 837740.1)
What is the Closest Equivalant toVdksummary option In Oracle Full Text Search (Doc ID 787173.1)
those notes on MOS may help. -
Document Management / Full Text Search in Projects & SolMan Directory
Hello experts!
I want to implement Full Text Search in my SolMan and therefore need your help.
I have installed Trex 7.10 and am already able to search within my Solution Database (Problems/Solutions).
Now I want to be able to search within all documents in my SolMan Installation - e.g. Roadmaps, SAP Scenario Descriptions or my own uploaded documents.
In the IMG I already found the section Document Management but I cannot get the needed RFCs (IMSDEFAULT and IMSDEFAULT_REG) working.
There is already a RFC called IMSDEFAULT, which was created during the installation of Trex and runs the
Registered Server-Program: Trex_SOT_20080327090311
I tried to configure my RFCs according to the IMG but, as I said, cannot manage to get them working.
I hope anybody has an idea or an guide on how to implement Full Text Search!
Please be so kind and provide help - thanks in advance!
Best regards
GeroldGerold,
I am running into the same issues because we want to do full text search on project documentation within Solution Manager. The default RFC connections IMSDEFAULT_REG and IMSDEFAULT do not work with the standard settings.
We created one index for IWBSOLAR so maybe I also need to check IWBPROJ in SKPR06 for project documentation and create a new index for this one ?
The indexing for IWBSOLAR now fails although there seem to be over 6000 documents marked but none are put in the index. After indexing there is a list of the documents all with code 6401 but cannot find any where what this code means. It seems to be succesful as all entries are green.
Any help/suggestions on this topice would be greatly appreciated. -
Full text search on PLM Web UI
Hello,
Full text search functionality in DMS with TREX solution , is working with SAP GUI. ( Original is checked in CV01N or CV02N )
Same functionality is not working with PLM Web UI .
Is there any setting has to be activated for this.
Thanking you,
Regards,
SatyaHi ,
Yes. When I checkin Document in CV01N , then I can find in CV04N.
But if I check original in PLM Web UI , then I can not find in CV04n.
I assume that indexing will not problem as it is working in SAP GUI case.
Indexing functionalities ( TREX ) are not called when Document is checked in through PLM Web UI.
Where we can check these settings ?
Thanking you,
Regards,
Satya -
External URL Mapping and Full-Text Search Generation
I have a dilemma,
I can map external URL all fine e.g.
<map version="1.0">
<mapID target="Welcome" url="http://docweb.net/help/test.html"/>
</map>
but the html files are not contained in the local directory, and thus the jhindexer is unable to (as far as i know anyway) generate full-text search using the externally linked html files
also from using a decompiler I have found that you can "force" it to generate the help for external urls (as the indexer prefixes all urls with the "file:" protocol, but I can only get this to work under debug mode, else it gives a heapSpace exception, so I wish to avoid having to do anymore unneccesary digging/decompiling.
Also just as a gripe, why is most of the java help source code unavailable, and the Indexer seems to be very inflexible (ontop of not having any documentation)That's the way it worked in X4 and later versions up but not including RH8. RH8 includes phrase searching in webhelp.
See www.grainge.org for RoboHelp and Authoring tips -
Annotating pdf documents in Preview - the text search feature doesn't work?
Hi everyone,
I'd like to annotate my pdf documents using preview. However, I realized the other day that as soon as I start annotating a document (with notes, shapes, highlighting, etc), the preview text search doesn't work anymore.
Thanks for any help or advice!This is a known problem. I have seen one suggestion to print the annotated PDF as a new PDF in order to get search capability back. You can try the Apple Discussions "search" feature at the upper right corner to look for more suggestions.
Maybe you are looking for
-
How can I transfer my itunes account from a computer that I no longer can access?
I originally set my Itunes accounts onto a PC that no longer works and cannot get access to it. I have a new PC, but cannot figure out how to access my Itunes account with my library onto the new PC.
-
Does anyone know where to find V3 drivers rather than v4. I'm having issues with XP working in my server 2012 environment. Thanks in advance!
-
Simple Console Display Manager
I created a forked project from "The Console Display Manager" CDM, thanks Ghost1227 for your work I simplified its interface and added new options. It has all its initial features (less theming): - Multiple X sessions (user logins are all handled
-
hai ian having problem with iphone 4 is suddenly shut down automatically when it is near 2 30-50% can u plz tell soutions for that plz
-
Outlook Deleting Calendar entries on sync
I had been able to sync with Outlook on two different PCs and data would merge. With new iTunes and OS4, whichever PC I sync with data doesn't merge it is overridden by Outlook and entries deleted. No boxes are checked that direct PC to override iPho