Text shifting out of alignment when previewed in Muse or in web browser

Hi,
I am having issues with some title text not staying where I want it to. Here are some images: http://imgur.com/a/ZX6z9
The first image shows how I have the page set up in the planner. The text in question is the title "Art Portfolio". If you look at the other two images, the second one being Muse's preview function and the third being in Safari, you will see that the title has shifted down a little in relation to the rest of the site. It is easily noticed because it throws the title out of alignment with the menu.
Anyone have any idea how to resolve this issue? I can compensate by moving it a bit higher in the planner, but I would very much prefer that the software worked as intended rather than me having to intervene.
Thanks for any help!
Andrew Bennett

Hi Thrfoot,
I have a similar text issue with resizing occurring in preview and live mode. I believe text boxes (unlike web pages) are responsive to browser width. Just for grins, try keeping your Orbitron font and making the text box slightly wider and see if that helps. It may not, but I had to jiggle mine about quite a bit to keep it in line with everything else.
Cheers,
Kellie

Similar Messages

  • I have an audio problem when ever I use my Firefox web browser that makes a sharp audible sound simiular to a video game gun shot sound effect when ever I go into a new web page?

    I have an audio problem that when ever I use my Firefox web browser it makes a sharp audible sound similar to a video game gun shot sound effect when ever I go into a new web page? I change to a new site or page a page on a site, I get an audible gunshot ping trpe sound? It happens almost every time. Its very annoying and is driving me nuts???
    Any body out there had this happen also or know how to diagnose and fix this type of problem? I would hate to have to delete my whole Firefox program and have to start over again. If that is the case I will probably just scrap it and go on to try Google Chrome instead. I already have GC partially set up. I really have liked Firefox up to this point. I know add ons can cause problems at times but I haven't added anything new lately and this just started happening?

    Hi,
    Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode].
    [http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
    [http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
    [http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]
    Safe mode disables the installed '''Extensions''', and themes ('''Appearance''') in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''. Hardware acceleration is also temporarily disabled - the manual setting is '''Tools''' > '''Options''' > '''Advanced''' > '''General''' > '''Use hardware acceleration when available'''. [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Advanced%20panel?as=u Options > Advanced]. All these settings/add-ons can also be individually or collectively disabled/enabled/changed in Firefox normal mode to check if an extension, theme or hardware acceleration is causing issues.
    [https://support.mozilla.org/en-US/kb/Options%20window Options]

  • Why i get x icon when i see bex report in web browser??

    Hi Experts,
    why i get x icon when i see bex report in web browser?? How can i avoid it..??
    DV

    DVMC,
    This could be of two reasons. One is formula collision if you are using formulas in the report. You can set from the properties which formula to act.
    Secondly, if you are having key figures data with diff dimensions i.e diff units or currencies used in calculations. This can be eliminated using NODIM() function in new formula.
    Check out which case applies to you.....

  • Why does it show my Apple ID is disabled when I try to download puffin web browser?

    Why does it show that my Apple ID is disabled when I try to download puffin web browser. It works for everything else.

    If you still have problem, contact iTune Support
    https://ssl.apple.com/emea/support/itunes/contact.html

  • Objects out of alignment when published

    Hi,
    I;m having issues with alignment and have searched the forum bt not yet found a resolution.
    Despite setting alignment in the Design view, the live view places some objects out of alignment.
    See Kingsdown Holiday Homes - Self Catering Chalet Rental at Kingsdown Park, Kent | Home
    and the boxes as part of the left hand column are out. However in the Dutch version, they are not.
    thanks,
    Andrew

    Hi Michael,
    Thanks for taking the time to look and reply. I've checked and there are no overlapping or stray boxes, but its something I'll keep an eye out for. I grouped all the column items together, but this doesn't prevent it from happening.
    So this in Muse:
    is this live:
    unless I do this in Muse:
    which presents this live:
    Thanks for taking a look,
    Andrew

  • Cannot open .jnlp file when asked to open with firefox web browser in ubuntu 11.10 using firefox 6

    After upgrading to ubuntu 11.10 the firefox 6 browser cannot download and open .jnlp file from the interactivebrokers website. Usually I go to the IB website and download tws.jnlp file which is opened in the firefox web browser. But now when I click on the Open with Firefox Browser button, the firefox browser opens a new tab and display the same open window again.

    Seems that after upgrading to 11.10, jnlp files open with firefox instead of javaws (Java Web Start).
    If you right click the file on the download folder and choose "open with" you can manually select java web start.
    Ubuntu bug...
    You can right click any .jnlp file and select "properties", go to "Open With" tab, mark Sun Java 6 Web Start and click "Set as Default". Should fix it. I don't know what would happen if you have the default ubuntu java instead of Sun's. Maybe this wouldn't be necessary.

  • TEXT increases in line spacing when previewed in Safari

    I am a beginner with dreamweaver and I have a problem with an
    AP Div that contains text. When I preview it in Safari the spacing
    between the text increases. How can I stop this from
    happening?

    I am a beginner with dreamweaver and I have a problem with an
    AP Div that contains text. When I preview it in Safari the spacing
    between the text increases. How can I stop this from
    happening?

  • Why does text show differently (vertical alignment) when viewed on a PC than on a Mac?

    The text shows misaligned (different) when viewed on different platforms (Mac or PC)
    The Menu section on this website ~> Menu
    Is there a way around this or a fix it. I was trying to look at the code in Dreamweaver and I did see some weird (>Span<) tags, I'm wondering if it might have to do with it.
    The goal is to align the right side (prices) perfectly. I even had to do the 'tracking' individually to every line. It does work, depending on what platform I'm working on, if I work and publish from a Mac, it would look fine no matter what browser I use, but when viewed on a PC the text gets misaligned. The same happens if I work and publish from a PC, it would show misaligned on a Mac.
    Hope there is a reasonable explanation for this.
    - Thank you,
    Ricardo

    The primary cause of the misalignment is the fact the text is using a "Web Safe" font. A "web safe" font is not a single font. Rather it's a list/stack of fonts for the site visitor's browser to try until it finds one that's available the visitor's computer. That means on one computer the text is in one font (i.e. Arial) and on another computer it's another (i.e. Helvetica) with the subsequent fallout caused by the varying character widths between the two fonts. The best way to reduce this variation between site viewers is to use a Web Font (either an Edge Web Font or a Self-Hosted Web Font).
    The alignment still won't be entirely consistent across browsers (or even versions of browsers), because each browser has it's own text layout engine and the engines do sometime change, but the variation will be radically reduced.

  • Audio timing out of sync when previewing or published.

    Hi all,
    The issue I am having is when watching a preview or published cp4 project, the audio timings are out from the start.
    This issue is not only on projects i have created but if i watch someone elses project the timing is still out
    However if i use a collegues terminal the projects will play fine and in perfect audio sync.
    I guess there is a issue with my terminal/captivate.
    Any help or advise would be great as it is making life hard having to watch all previews on another terminal.
    cheers
    Lee

    How was this clip imported? If it was captured/ingested, did you make sure that the sample rate of the capture settings matched the sample rate of your audio? Normally FCE will give you a warning if they don't match, but it can't hurt to make sure.

  • HP C4680 all in one printer out of alignement when printing avery business cards.

    I recently purchased an HP C4680 all in one printer and have found
    that it will not print Avery clean edge C32028-25 business cards. It
    prints ok on plain paper and when you compare against the business card
    sheet everything is in the correct position. However when you print the
    actual cards the printed area creeps up the page and some of the print
    is off the cards ruining the sheet. I am using avery design pro
    software version 5. The print preview shows the printing area correctly.
    Please advise of a fix for this issue.

    I have the same problem with my HP Officejet Pro 8000 using Avery business cards.  I don't think HP knows how to fix the problem.  I was told by HP to select card stock as my paper type, but that is not on my menu.  I may have to adjust my PageMaker template to counter the creep.  You would think that this would be an adustment that could be made in the software. It amounts to 1/8" over the whole page.  I don't plan on much help from HP since I have not received any help in the past.

  • Main menu out of alignment, when first opened in dvd player

    I have a strange problem.....
    I have authored a very simple 1menu 1 track 4x3 dvd, something I have done a thousand times..
    I have created a .img file.
    When I open that file and open the DVD files in dvd player to test it, the menu come on all out of wack and the overlay is not over the button.
    It kind of looks like a 4:3 image that is stretched vertically (like anamorphic 16x9) but not centred, the bottom of the frame is cut off...
    BUT
    as soon as I got up to the DVD Player menu to "open DVD media" it immediately corrects itself. and all is ok.
    any ideas where this glitch is coming from?
    I am running
    Macbook pro 10.4.11
    DVD studio Pro 4.1.2
    Thanks!

    I have seen this in the past when the dimensions of the overlay don't match the frame size. It has been a few versions since pixel aspect ratios have been an issue, such as on 16:9 Pan&Scan menus. However, I bet if you go to your photoshop file, you may find that there is some layer in there that has some leftover pixels outisde the canvas. A quick select all-crop will do the trick there. By opening your build or the image in DVD Player you should be seeing pretty much what any othe player would show (avoiding any Simulator-specific anomalies) so I would definitely try to track this one down.
    Hope this helps -
    Max Average

  • Anyone else seeing "Invalid server response" when logging into VCMA through a web browser?

    I am getting "Invalid server response" when I log into VCMA from Safari on my iPhone. I have the app on my iPad and it will connect and manage my ESXi hosts normally (so I am fairly certain the setup and config of the Virtual Appliance went ok).
    I Googled the error and got some returns about different Virtual Appliances doing the same thing. Seems to be an issue with running VCenter on a Windows 2008 server (which we are). Users reported switching VCenter to Windows Server 2003 boxes and it worked fine.
    Anyone else ran into this and figured it out?
    My environment:
    vCenter Server 4.1.0 - Build:258902
         - running as a VM on ESXi 4.1.0 - Build: 348481
         - running on top of Windows Server 2008 R2 Standard SP1
         - vSphere Client 4.1.0 - Build: 258902
    vCenter Server and VCMA Appliance are on the same subnet.

    I had not done that yet, but thanks to your suggestion I have made that change.
    I am not sure if the above fixed the issue, but I am now able to get the website to load. I was trying to load the page https://vcmaServerIP:5480 which will load a login page. When you try to log into it, I was and am still getting the error I first posted about. By some weird chance I tried to load the page https://vmcaServerIP and got a completely different looking page and was able to log in and work like I should be able to.
    So, lesson learned: do not put the :5480 at the end of the URL and you will get the correct login page.
    Thank you dschubot for your help.

  • OS X 10.8  Problems with images and layout when printing to PDF from any web browser

    Hi there,  I just bought a new macbook air and running OS X 10.8.  This problem happens in both Safari or Chrome:  When I go to print to a PDF file, the website suddenly drops most images and formatting, ending up in a very old-fashioned layout.  Is this something new with OS X 10.8, or any other suggestions as to what I can do?
    BEFORE:
    WHILE PRINTING:

    NewOSX10.8 User wrote:
    No difference.  I have discovered that it is probably the websit (weird) that is mainly at fault, as I tried the same thing on 2 other machines and the same thing happens to a varying degree on this website, and a lesser degree on other sites.  Thanks for your help, it may not be OS X 10.8 at the root of the problem.
    Yes if it prints to a printer in the same manner, and it occurs regardless of browser it is the website.

  • J2EE engine was always down when I accessed it in the web browser!

    Hi,gurus:
    Having installed netweaver 7.0 SR3 and made the post-installation of xi with nwa, I accessed the j2ee engine with the URL "http://<hostname>:50100/sld or http://<hostname>:50100/irj".Sometimes the webpage could be accessed,but other times the webpage was blank,and after I refreshed the webpage again,it displayed the error like "503 service unavailable".Then I found the color of disp+work.exe and server0 in MMC was yellow.After several minutes,it turned green again.Then I could access the j2ee engine successfully.However,it stopped again after I accessed some webpages.
    This problem has embarassed me several weeks,could you help me?Any help would be appreciated,tks in advance.
    I picked up some related message which may be helpful to resolve the problem:
    *defaultTrace0.trc: *
    1.Cannot lock configuration;it is already locked.
    Caused by :com.sap...LockException:.........J2EE_CONFIGURATION_MANAGER.....it is in use by another owner.The lock collision occurred with user <internal>
    2.java.security.keyStoreException: cannot get root keystore view configuration; A configuration with the path "keystore" does not exist.
    dev_server0.xml:*
    1.com.sap.secruity.api.NoSuchRoleException:Role with uniqueName system_admin_role not found!
    com.sap.secruity.api.NoSuchRoleException:Role with uniqueName content_admin_role not found! 2.com.sap.security.api.NoSuchGroupException:Group "Administrators" does not exist.
    3.password logon no longer possible - too many failed attempts.

    Hi,
    Please have a look at this below snote which is actually a
    correction note for sp14 sap web as java 7.0
    1020365
    Could find below information within the same.
    Locking
    - Configuration Editor does not close files after upload, i.e. those files cannot be deleted unless the Configuration Editor was closed.
    which may correspond to you below problem
    1.Cannot lock configuration;it is already locked.
    Caused by :com.sap...LockException:.........J2EE_CONFIGURATION_MANAGER.....it is in use by another owner.The lock collision occurred with user <internal>
    I hope this will help you out.
    Rgds
    Radhakrishna D S

  • Getting "OSStatus error -19160" when trying to play videos from Web browser

    I have Snow Leopard on a MacBook Pro (all silver aluminum), and am having a problem playing a video feed online. I get the message: "OSStatus error -19160". Nothing turns up in Google searches on that particular number. I've checked both QuickTime and Flip4Mac. Both are the latest. Any idea what this is? Is there a place that lists all OSStatus errors?

    Greetings,
    I encountered error -19160 while attempting to stream a site that had formerly worked just fine.
    I'm using Quicktime 10.0 and I've installed Flip4Mac 2.4 on a Mac Mini with Intel processors.  Earlier in the day I opened FireFox while streaming (I close FF after QT begins streaming) - Quicktime ended the stream at that point and wouldn't pick it back up.  I thought it was just a case of "don't do *that* again".
    When I attempted to view the same stream later that day I was met with the error -19160 message.  Fiddled around with settings, booted soft & hard but nothing eliminated the error UNTIL
    I dragged the WMV player icon from the Applications folder to the Trash bin - soft booted, then chose "Put Back" from the Trash menu.
    Everything now works splendidly.
    Hope this helps somebody!

Maybe you are looking for