Text/Signal during New Years

Around 12:05 of (today) New Years I had my bars on my phone for the signal but even as I texted out several friends for new years i had not received the their text's back for 1+ hours. When I had finally received their texts I was bombarded by their texts but what really upset me was that I had problems with my signal or so. Can this problem be explained so I could have a clear idea of what's happening? Please and thank you!

I suspect an influx of Happy New Year texts going out all over the place.

Similar Messages

ITunes required a restart twice during New Year's Eve party

I was playing music for a New Year's Eve party using iTunes on my MacBook Pro into Audioengine powered speakers. Twice, the music basically stopped playing, requiring a restart. You could hear some noise and the song that was playing at very low volume. I tried closing the program and reopening, but only a full restart brought the music back. What happened? I'm using iTunes 8.02.

I finally stumbled across a fix for this problem, and in case someone else is frustrated at some point by a similar issue I'm posting what finally worked to enable me to bring iTunes up at any time (without rebooting first).
The solution was to go to the preferences to uncheck "search for shared libraries".
I'm glad the problem is fixed, but Apple developers really should include a timeout function on iTunes search for a shared libraries. At least a visual dialog to confirm that the application is in the process of searching for a shared library on the network would help provide clues as to what is causing the spinning beach ball to appear right about the time the application window should pop up.

Please help ! Can I cut-off New G/L migration date during fiscal year ?

Dear Experts
I know that the principles of migration date of New G/L migration should be on first day of fiscal year and Year-end closing of the old fiscal year must be complete before New General Ledger Accounting is activated.
However, if I need, can I cut-off new G/L migration date during fiscal year before year-end closing ? And Which points should be concern.
Best regards,
Suphawat

Hi,
First you should have installed the cockpit., you should have completed the testing and migrated the transports before the end of the Fiscal year which is 31st March in your case. Depending on the scenario, this will take 20 - 40 days.
You can begin the migration once your year end activity is performed.
If you have not installed the cockpit and completed the configuration and tested it.. forget it for this year, do it next year.
Hope this is clear now.
Edited by: Jayaraman N on Apr 7, 2011 10:41 AM

Can I cut-off New G/L migration date during fiscal year ?

Dear Experts
I know that the principles of migration date of New G/L migration should be on first day of fiscal year and Year-end closing of the old fiscal year must be complete before New General Ledger Accounting is activated.
However, if I need, can I cut-off new G/L migration date during fiscal year before year-end closing ? And Which points should be concern.
Best regards,
Suphawat
Moderator: Please, search SDN

Hi,
First you should have installed the cockpit., you should have completed the testing and migrated the transports before the end of the Fiscal year which is 31st March in your case. Depending on the scenario, this will take 20 - 40 days.
You can begin the migration once your year end activity is performed.
If you have not installed the cockpit and completed the configuration and tested it.. forget it for this year, do it next year.
Hope this is clear now.
Edited by: Jayaraman N on Apr 7, 2011 10:41 AM

Since the new year I have been unable to send or receive texts from someone I text daily...he does not have an iPhone

Since the new year I have been unable to send or receive texts from someone I text daily...he does not have an iPhone

Mail: Troubleshooting sending & receiving email messages

Data conversion for New GL - Going live during fiscal year

Hi Experts,
My client is going live on Oct 1 (fiscal year in Jan -Dec). So for data conversion we need to load P&L and BalanceSheet as of Sept 30, 2009. I need your help to resolve few open issues. (we have activated Doc Splitting with Zero Balance and Segment )
1) When we load P&L balances - how can I assign Profit Centers to all these P&L iitems .
2) What is the procedure (best practices) to assign Profit Centers to all the Balance Sheet items since we are going live during Fiscal Year
3) When we process open items (AR, AP) in month of October how the Profit Center assignment will work?
(My client will be using Profit /Cost center terminology first time, so we need to map all the B&S and PnL items to Profit centers)
4) What is the best way to map all the Balance Sheet GL accounts to Profit Centers.
Sorry for asking too many questions. Any help would me very much appreciated.
Thanks,
Sam

1) When we load P&L balances - how can I assign Profit Centers to all these P&L iitems .
Each P&L account balance has to be upload with cost centre, then automatically PC will be triggered.
2) What is the procedure (best practices) to assign Profit Centers to all the Balance Sheet items since we are going live during Fiscal Year
Let client decide the profit centre for balance sheet items, since they knows which balance relates to which pc
3) When we process open items (AR, AP) in month of October how the Profit Center assignment will work?
While uploading AR,AP balances, each line item to be uploaded with profit centre, automatically in october PC assignment will work.
(My client will be using Profit /Cost center terminology first time, so we need to map all the B&S and PnL items to Profit centers)
4) What is the best way to map all the Balance Sheet GL accounts to Profit Centers
Try to identify each balance sheet gl balance to each profit centre, this will help in future reports. otherwise put in common pc

HT2523 How do I add shadow to the title of a document while in Pages? For instance: NEW YEAR'S NEEDS. I'm also at a loss to know how to create a folder for certain types of documents such as "Sermons" or "Lessons."

How do I add shadow to a title, such as, NEW YEAR'S NEEDS, while in Pages? I also don't know how to set a new folder for documents of the same type such as, "Sermons," or "Lessons." Any help will be greatly appreciated.
Donnie

Yes, I very well may be over thinking this, but I tried duplicating and moving it, but the text distorts slightly, which can be mostly remedied by rotating it on the x-axis, although the light is still off. And the shadows and reflections are not visible - this is pic1... In pic2, I used "rotate 3d object" with the green and red arrows, instead of just sliding it up the y-axis using the coordinates in the scene tab. Using the green and red arrows to move the text preserved the reflections but the shadows now aren't visible. It was also hard to align the text perfectly in scenario 2. Thanks for the help

RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'

I am having this error pop up very frequently on some new SAP systems. This will randomly happen and keep us from being able to release transports and import them in STMS. I receive the following error:
There was an attempt to start the transport control program tp using the local RFC interface.
An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
- When I check the Transport Tool (STMS: import queue> check> transport tool) I get the following information:
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456#Time
out during connection setup (check that partner exists
- When checking the TP System Log I receive the same error. The RSTPTEST report does not give any additional information. SM21 shows a warning and an error:
Warning:
Communication Error, CPIC return code 020, SAP Return code 456
Dialog Process No. 000
Problem cl: SAP web AS problem
Package: STSK
Further Details:
Module Name: thxxhead
Line: 7488
Error Text: 020456
Caller: ThRecei
Error:
Problem cl: transaction problem
Package: STTO
All of these errors are only pointing to a time out. I cannot figure out why this is happening. I checked the TMS RFC connection in SM59 and they are fine. I have been able to work around this issue in 2 different ways. First, I can delete the files in the "\trans\tmp" directory on the server. Sometimes this resolves the error. Else I have to restart the system.
I need to understand where this issue is coming from and how to resolve it. It is becoming more and more frequent. Thank you for your help!

Hi,
i have had similar issues during this week. After looking for a solution everywhere i found out that i didn't set up the FQDN on this system.
Symptoms were:
se38 > RSTPTEST timed out sometimes(not always)
sm59 > TCP/IP connections > CALLTP_WindowsNT > test connections timed out sometimes (again, not always)
STMS Overview > Systems: I was not always able to distribute and activate configuration from the Domain controller via Extras > Distribute and Activate Configuration (it died on the mentioned system)
Transports failed mostly with the same error.
The error log was somewhere deep in ST11. It could not resolve our FQDN.
The solution, for me, was to add our FQDN to the WINDIR\System32\drivers\etc\hosts file.
We upgraded the kernel as well (from 7.20 patch 046 to most current) but this didn't help.
The FQDN is a concatenation of computer name and dns suffix of the network (if you have none, you can add one via rightclick on the used network adapter>ipv4>properties>Advanced>DNS tab, so in the end the host file looked like
127.0.0.1 localhost computer-name.ourSuffix.com
After this line has been added, the error stopped and the transports work again.
I hope it helps. Good luck.

Real-time HDV importing ..& Happy New Year!

Hi! Happy 2006!
Some time in December (?) I said I'd been to the London Apple Store to try importing HDV - with a Sony FX-1 camcorder - into iMovie HD on a PowerMac, to see if it'd import in "real time" ..instead of importing at half or quarter speed, on my PowerBook and Mac mini, while it converts hi-definition footage into Apple's 'Intermediate Codec' (to make HDV MPEG footage editable).
It couldn't be done in the hour and a half I was there, so an Apple Genius was going to get back to me.
After a bit of complaining and cajoling, a Genius at 'The Studio' in the Store finally got back to me on Jan 3rd. [I'm now back home, so this is my first visit to Discussions for a while!]
As I promised that I'd report back, here's what he said:
"Today I imported HDV 1080i footage into iMovie using the Sony HDR-FX1 Camcorder using a Dual 2.7 G5 Power Mac with 4.5 Gb of Ram and there didn't appear to be any lag, it was realtime. I would recommend having as much memory as possible and having less than 4.5 might mean there is a transcoding lag as iMovie converts the HDC encoded footage using the Apple Intermediate Codec. I do not have any details what the minimum speed processor and memory requirements are to achieve realtime import, however it is hardware dependent.
As another alternative you may consider using Final Cut Pro 5 software. This software uses the HDV Codec Natively and there is therefore no transcoding required. Capture is in realtime, whatever machine you use, so long as it is within the minimum requirements for Final Cut Pro 5. (Please check http://www.apple.com/finalcutstudio/finalcutpro/specs.html for further detail) For details of using HDV with Final Cut Pro 5 please go to http://www.apple.com/finalcutstudio/finalcutpro/editanything.html
I hope this goes someway to answering your queries."
(..So maybe I'll get a post-Christmas present of a quad ..Daniel's should have arrived by now ..wonder if his feet have touched the ground since..)
So we who patiently wait while iMovie HD imports hi-def HDV at half-speed or slower could achieve 'real-time' importing with a PowerMac and lots of RAM, it seems.
I also tried an HC-1 (..the compact 1-chip HDV camcorder..) and have to report that the auto-focus isn't anywhere near so fast as the pretty-near-instant focusing of the FX-1, and - predictably - its low-light performance isn't anywhere near the bright, un-grainy, colourful images of the FX-1. But the HC-1 does have NightShot and Super NightShot for shooting (monochrome) in absolute darkness, helped by infra-red LEDS on the camera, which the big, bulky FX-1 doesn't do. The HC-1 has just about all of the other gizmos of the FX-1 (..user-definable preset transitions - to zoom, change focus, adjust white balance, etc, automatically during shots..) but they're accessible mainly through touch-screen menus, instead of via quick push dedicated switches.
So Happy New Year; hope it's a good one - and a faster Mac DOES mean real-time importing of HDV footage!
[..I notice that Focus FireStore on-camera hard drives - which mean "say goodbye to importing, because your footage is saved to disc while you shoot" - have an HDV-compatible model ..but I think it still takes time to convert the captured HDV MPEG footage on the drive into Apple's Intermediate Codec for editing within iMovie HD. I'll investigate further..]
Hope you had a good Christmas/Hanukah/whatever!

HAPPY NEW YEAR!
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

Z10 loses signal during a call

I have a issue with loss of signal during a call on my z10.
When the automatic mail checking enabled and during a call mail is checked, I hear snatches of words and communication break, look at the screen see the message "network is busy" and zero signal icon. But after a few seconds the signal becomes full again.
Sometimes I have to call back 3-4 times to finish the conversation.
I have tried different OS versions, but nothing helps.
I had to turn off push notification in gmail account and switch to manual mail check for this to happen as infrequently as possible. But still it happens sometimes.
Many users from Russia have same problem.
My current OS: 10.2.1.3247
STL100-2
Operator "MTS" Russia
P.S. Sorry for my English

Hey TalG,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
I would suggest removing the battery and placing it back in. If the issue still persists, then I suggest contacting your network service provider and try a new SIM card.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

ORA-1092 signalled during: alter database open...

When trying to startup the db runnint into following error:
SMON: enabling cache recovery
Sat May 16 10:35:12 2009
Successfully onlined Undo Tablespace 1.
Sat May 16 10:35:12 2009
SMON: enabling tx recovery
Sat May 16 10:35:12 2009
Database Characterset is UTF8
Sat May 16 10:35:13 2009
Errors in file d:\oracle\visdb\9.2.0\admin\vis_apps\udump\vis_ora_2200.trc:
ORA-00600: internal error code, arguments: [4193], [2391], [2395], [], [], [], [], []
Doing block recovery for fno: 10 blk: 159
Sat May 16 10:35:17 2009
Recovery of Online Redo Log: Thread 1 Group 2 Seq 3 Reading mem 0
Mem# 0 errs 0: D:\ORACLE\VISDATA\LOG2.DBF
Doing block recovery for fno: 10 blk: 153
Sat May 16 10:35:18 2009
Recovery of Online Redo Log: Thread 1 Group 2 Seq 3 Reading mem 0
Mem# 0 errs 0: D:\ORACLE\VISDATA\LOG2.DBF
Sat May 16 10:35:18 2009
Errors in file d:\oracle\visdb\9.2.0\admin\vis_apps\udump\vis_ora_2200.trc:
ORA-00607: Internal error occurred while making a change to a data block
ORA-00600: internal error code, arguments: [4193], [2391], [2395], [], [], [], [], []
Error 607 happened during db open, shutting down database
USER: terminating instance due to error 607
Sat May 16 10:35:19 2009
Errors in file d:\oracle\visdb\9.2.0\admin\vis_apps\bdump\vis_pmon_2288.trc:
ORA-00607: Internal error occurred while making a change to a data block
Instance terminated by USER, pid = 2200
ORA-1092 signalled during: alter database open...
Pl. advice to recover from this suitation. New to recovery/bkup.
Thanks,
Sashi.

00607, 00000, "Internal error occurred while making a change to a data block"
// *Cause: An internal error or memory exception occurred while Oracle was
// applying redo to a data block.
// *Action: call Oracle Support

ORA-604 signalled during: ALTER TABLESPACE...

Oracle 10.2.0.4 EE, Server 2003...
Today I wanted to add new datafile…
First I restart the instance and then used EM to add datafile… After 5 minutes process failed and in AlertSID.ora I get this message:
===========================================================
Mon Feb 08 10:23:04 2010
ALTER TABLESPACE "R1" ADD DATAFILE 'D:\Datafile\R03.DBF' SIZE 15000M AUTOEXTEND ON NEXT 512M MAXSIZE 32767M
Mon Feb 08 10:28:08 2010
ORA-604 signalled during: ALTER TABLESPACE "R1" ADD DATAFILE 'D:\Datafile\R03.DBF' SIZE 15000M AUTOEXTEND ON NEXT 512M MA…
===========================================================
Then I create datafile with command prompt and everything was fine, new datafile was added.
Any Ideas why does this happen?
Thanks!

Error message was only:
Mon Feb 08 10:28:08 2010
ORA-604 signalled during: ALTER TABLESPACE "R1" ADD DATAFILE 'D:\Datafile\R03.DBF' SIZE 15000M AUTOEXTEND ON NEXT 512M MAXSIZE 32767M
As I said, I used EM and after 5 minutes EM connection failed. Then I re-connect and EM don’t show me any errors, everything was fine but new datafile was not added. Only I get error message in AlertSID.ora…

Gremlins Strike After New Year

Well, Y2K came almost a decade late but it seems that the new year has brought some new gremlins to my previously acceptable 7216 DVR as well as my non-dvr STB. The DVR no longer does basic functions like pause or rewind on "live" programs - if I can make it pause after repeated button presses, there is no saved content to rewind through (it jumps ahead to real time). There are also lip-synch issues for the first time ever. Multiple hard reboots have limited effect as the symptoms sometimes manifest, and sometimes don't. Also, I had to do a hard reboot on the non-DVR HD STB for the first time ever since the TV display said "no signal". As stated, I never had problems like this, mostly because I faithfully do a hard reboot twice a week. Now it doesn't seem to matter. I wonder if the new year (leap year?) messed up the software? Not being an engineer, this is very frustrating and I truly believe these hardware issues (see this forum) to be the Achilles heel for Verizon FIOS. Verizon must rectify the hardware reliability factor soon. Thank you.

retiredme wrote:
Well, Y2K came almost a decade late but it seems that the new year has brought some new gremlins to my previously acceptable 7216 DVR as well as my non-dvr STB. The DVR no longer does basic functions like pause or rewind on "live" programs - if I can make it pause after repeated button presses, there is no saved content to rewind through (it jumps ahead to real time). There are also lip-synch issues for the first time ever. Multiple hard reboots have limited effect as the symptoms sometimes manifest, and sometimes don't. Also, I had to do a hard reboot on the non-DVR HD STB for the first time ever since the TV display said "no signal". As stated, I never had problems like this, mostly because I faithfully do a hard reboot twice a week. Now it doesn't seem to matter. I wonder if the new year (leap year?) messed up the software? Not being an engineer, this is very frustrating and I truly believe these hardware issues (see this forum) to be the Achilles heel for Verizon FIOS. Verizon must rectify the hardware reliability factor soon. Thank you.
Try getting Tech Support to do a reset on your equipment. That may resolve the issues you're having. I was experiencing some problems that a hard reboot no longer fixed (although it had on previous occasions). After they did the reset, the problem I called about as well as several other minor issues I was having, were all fixed (for now anyway). I also have lip-sync problems (written about in another thread. It's a recurring problem that gets worse with time.) A reset from Verizon always greatly improves this, although it doesn't outright fix it. (Lots of speculation about whose fault this problem is and most fingers point back to the broadcasters. My thought on this is if they were actually the cause, why doesn't everyone experience this problem and why does the reset improve the sync???) So, calling in for a reset might be worth a try. (Maybe they ran a gremlin elimination program along with the reset?!?!)

Chinese New Year!! Not cool Apple!!

Hi, i would like to begin by saying i didnt know where else to post this, but i wanted to know if anyone else is experienceing this with their iMacs. I ordered a 20" iMac Core Duo with the 256Mb graphics upgrade. It shipped out on tuesday the 31st. I also paid extra for the 2-3 day shipping. Today is the third day and i checked the tracking number on UPS.com and my package hasnt even left China. Now i called UPS and guess what, its the **** Chinese New Year and they say my package wont go out till next monday, and i wont get it till next friday. Now i paid for the expedited shipping for a reason. The customer service rep said i should contact Apple for a refund because the regreted to tell me about this. Anyone else in the same boat?

I have been in the Far East (Vietnam) during the lunar New Year, so I understand that over there New Year is just like Christmas over here. My complaint with Apple is that the e-mail I was sent indicated that the iMac was shipped on Monday the 30th, and would arrive on Friday, Feb. 3. I also noticed the Airline Off-loaded packages status on UPS website. After 3 attempts, I finally got the straight story from UPS international that they were shut down from Saturday Jan. 28 thru Sunday Feb. 5.
My complaint with Apple is that they billed me on Jan. 30, which they considered to be the ship day, knowing that the product wouldn't actually ship until Feb. 6. The reason, obviously, is cash flow. And I now have my credit charged a month earlier than it should have been, which means I have to pay a month earlier.
Al 15" Powerbook G4 1.5 GHz 1GB Mac OS X (10.4.4)

HAPPY NEW YEAR and what to cook ?

I've noticed that the newspapers and news programs on TV ( if you can call them news programs ).. are already gearing up for the never ending barrage of
" THE YEAR IN PICTURES " OR
" THE YEAR OF BREAKING NEWS "
OR
You know, the scramble of producers trying to capture the past year of their best stories and live coverage of stuff...
Is really cheap to produce...and fills up lots of columns and time slots....YIPEE !
So while I turned off the YULE LOG I am now looking forward to the BARF BAG ....as I am reminded of all the retarded stories of the past year and how the media made it great.
Like when Lady Ga Ga wore that scary snake costume at the " TV AWARD DINNER FOR REPTILES " event in NOLA last June ?
So what are we gonna eat for the new year celebration ? Or is it just gonna be BEER THIRTY ! YIPEE !
for that matter, what are we gonna DRINK ! ?? I don't know about YOU but after a few drinks I don't even care that mayor bloomberg turns the new year celebration into a billy joel " new york state of mind ".

just finished first steak on skillet... yum....
however I screwed up slightly...and can easily fix that next time...
Shooter.. the skillet is " ribbed "...so that it has raised ridges that the meat sits on... so it isn't a " pan " ...it isn't FLAT....it's ribbed....like a grill...where only the raised parts touch the meat.
Soooo, when you put salt in the thing it sits in the valleys ....and does NOT TOUCH THE MEAT....no salt touches the meat...before or during or after cooking...
So that's one thing...
thanks for the heads up about that though, cause I know what you mean.... you wouldn't believe the gazillion recipes and methods I've researched in the past few days about this...
I know more about SALT now also, than I ever wanted to know .
And the 3-4 mintute thing... ( this is rib eye boneless about 1.5 - 2 inches thick )...that was too long...
It's tricky cause I pre heated the skillet....at high.. then turned heat to medium ....where basically the entire skillet including handles were HOT and the thing started so smoke slightly ( very slight ).... Put steak on, turned after 3 min and then left for another 3 min...and then stuck a fork in the top..and some red juice came out...so I screwed up at this point... I turned it OVER again...thinking it was rare....for about 30 seconds.....what a stupid mistake...
It ended up , in that 30 secs... I got plate, fork and came back to oven and put it on plate... 30 secs...and it was medium in middle instead of medium rare the way I like it....
I was a jerk.
I think I can now adjust a couple things re: the level of heat at beginning and the time....but it's pretty darn close.. I mean, like 30 secs made a HUGE difference....
The other thing that I screwed up on ... is I put the salt in grooves to much... it wasn't touching the meat.. but it did make the meat salty. Not terrible... I mean, the steak was really yummy...very good... but it can be " better "...
I have to put about half the amount of salt in the valleys....so when the juice goes onto skilliet the salt makes the juice sorta vaporize and go back into meat...but I used too much salt..
I'm halfway or more to being where I wanna be with it and it did taste really good.. but it was medium in middle ( grrrr ) and also it was a little salty ( grrrrr ).
I'll make another one tomorrow....same bat time, same bat channel !
thanks for your help !

Text/Signal during New Years

Similar Messages

Maybe you are looking for