Text Skewing problem in FLASH CS3

I created a button object consisting of text.
I skewed the button 0-degrees horizontal and -25-degrees vertical. I published the flash file and it looks good.
I changed the skew to -5 degrees horizontal and -21 degrees vertical published it looked good.
I changed the skew back to 0 degrees horizontal and -25 degrees vertical.
However, when I published swf file continues to maintain -5H, -21V in appearance even though the fla file has skew of 0H, -25V.
Any suggestions?

When that sort of thing happens to me, I usually just throw away that object and start with a new one.

Similar Messages

Wingdings 3 Problem in Flash CS3

I am trying to use Wingdings 3 in a text box (dynamic) in
Flash CS3, but it never comes up correctly. It only shows the
letter, not the corresponding symbol. I have tried embedding font
tags in the dynamic text and i have set the textbox's default font
also, but no luck. the font is installed in windows on all relevant
machines.
Any thoughts?

I just noticed the same problem - both CS3 and 4 do not display dingbats properly. Keycaps works fine. The file contained a Wingdings checkmark in a static text which I did not edit- it was a "u" with an umlaut over it when I opened the file.
I replaced the fonts and this did nothing to help. I am running Vista 32 with 4GB Ram.

Problem Installing Flash CS3 Pro PLEASE HELP!!

I have downloaded the installer for about the 3rd time i
extract it all right but when i run the setup.exe its all fine
until it starts to install but then it says something like " insert
Adobe Flash CS3 Professional to continue" i keep trying but it
never works i even converted the folder to a .iso and mounted it
with the same name it told me but that still doesn't work. I have
run out of ideas please if anyone knows the problem please can you
help me out?

FYI: "Br" is the Bridge application - try launching that to
see if it fully installed.
Chris Georgenes
Adobe Community Expert
mudbubble.com
keyframer.com
http://tinyurl.com/2urlka
Ms. Clause wrote:
> My computer is a brand new Vaio laptop loaded and 4 GB
RAM. I don't think I
> have a hardware problem. I tried to reinstall,
redownload and it still will
> not install the flash software. After I download I
clicked on the file and it
> install a folder in my drive, then I clicked on set up,
it went through a
> normal set up but for some reason it doesn't load Flash
CS3, it only load 2
> components from that I think it Br and something else.
>

Problem Installing Flash CS3 in Vista

I downloaded a trial version, but when I install, it only
install Active X and Flash Player, it gave me a message that 3
other programs did not get installed. When I try to open CS3 Flash
software it's not there only Br is there and Flash Player. Anyone
encounters this problem?
thanks.
Liz.

FYI: "Br" is the Bridge application - try launching that to
see if it fully installed.
Chris Georgenes
Adobe Community Expert
mudbubble.com
keyframer.com
http://tinyurl.com/2urlka
Ms. Clause wrote:
> My computer is a brand new Vaio laptop loaded and 4 GB
RAM. I don't think I
> have a hardware problem. I tried to reinstall,
redownload and it still will
> not install the flash software. After I download I
clicked on the file and it
> install a folder in my drive, then I clicked on set up,
it went through a
> normal set up but for some reason it doesn't load Flash
CS3, it only load 2
> components from that I think it Br and something else.
>

[Help] Problem Installing Flash CS3

Hi there mates,
I have a problem here. I downloaded the 30 Days Trial version
of Adobe Flash CS3 Pro from this site to my Vista Laptop but when i
finished installing, theres an error box at the bottom of the
installer saying that Adobe Flash CS3 is failed to be installed and
even after i restarted computer i still have the same error.
Do anyone have any idea how to solve this problem of mine?
I'd be grateful if i can get a answer.
Regards to all...!

FYI: "Br" is the Bridge application - try launching that to
see if it fully installed.
Chris Georgenes
Adobe Community Expert
mudbubble.com
keyframer.com
http://tinyurl.com/2urlka
Ms. Clause wrote:
> My computer is a brand new Vaio laptop loaded and 4 GB
RAM. I don't think I
> have a hardware problem. I tried to reinstall,
redownload and it still will
> not install the flash software. After I download I
clicked on the file and it
> install a folder in my drive, then I clicked on set up,
it went through a
> normal set up but for some reason it doesn't load Flash
CS3, it only load 2
> components from that I think it Br and something else.
>

Problem Update Flash CS3 (9) to Flash C3 (9.02)- MAC OS X Tiger

Hi everybody,
I am on MAC OS X Tiger. My flash is version 9.0 (CS3) and the
software is install in the default configuration
(/Applications/Adobe Flash CS3/...).
My problem is the update for Flash CS3 to get the 9.02
version works wrongly.
I doubleclick on it. I write my request password to install
software or update (It's own to MAC).
And then the Installer tells me that there is an Error
because it didn't find the location of my software.
Is there any thing that I can do to help the updater to find
the good place ? Is there manual installer ? Which file is corrupt
I can remove and install again the software because I am
temporary in Singapore and my DVD is in France.
I am open to any suggestion.
Xeonarno

By abnormally shutting down the OS X partition has most likely gotten scrambled. You will have to reformat that volume and reinstall OS X.
Since OS 9 is working you may still be able to copy your personal files to an external drive so they won't be lost.

Scrolling Text and Images in Flash CS3

I am pretty new to Flash and I have spent all day trying to
look up tutorials on making it possible to scroll text and images
in Flash but none of them are working for me. I know you save the
content into a movie clip but that's as far as i have gotten. would
anyone be able to walk me through this PLEASE???
Thanks,
Peter

You could use a Swing HTMLPANE or draw it all onto a
BufferedImage and display that (code posted under 2D graphics thread).
MArk

How to use Text Layout Framework in Flash CS3?

Hi,
I perferctly now how to get TLF to work in CS4.
As far as I know, the the base code is in AS3 so I should be able to locate the classes in CS3 and use it in Flash CS3.
I appreciate if there is anyone who can help me with this?

I'm not that knowledgeable about Flash Pro, however, I'd be quite surprised if you could make this work. CS4 added Flash Player 10 support. That includes a compiler update for Vector - a new AS3 feature. Minimally you'll have to get Flash CS3 to generate FP10 level content and compile with the playerglobals.swc from FP10. If you can get that far than adding textLayout.swc to your project should be straightforward.
Maybe someone else has an idea.
Hope that helps,
Richard

Problem in Flash CS3 video Encoder

Hi,
I am experiencing a bug in the Flash CS3 Video encoder. I
have saved an XML file with settings that I will be using for
numerous video. I have basically set the Data Rate, Frame Rate, Key
Frame Interval, Audio and Video Size. The frame rate is set to
14.98.
When I load the profile that I have saved, the frame rate
stays at 14.98, but if i hit ok, and then click on the settings
again to modify them, the frame rate goes to 'same as source' and
does not stay at 14.98. If I change the frame rate to 14.98 at this
point, it sticks. My question is, why does it go to 'same as
source', and it concerns me, that if I do not manually go in and
change the settings back to 14.98, is it encoding the video at its
current frame rate.
Here is the XML file I use for encoding:

It appears that the <FrameRate></FrameRate> node
is only saved to the XML file if you choose something other than
"Same as source". However, it's always a non-standard value.
Evidently, if you are creating your own <FrameRate> value in
a custom XML setting file, you need to multiply the frame rate by
65536. For example, if you want 24 fps in the profile, your XML
should look like the code snippet below.

Beware of Zoomify and Flash CS3!

Does anyone else have problems getting
Zoomifyer for Flash to work in Flash CS3 on Mac OSX?
Everytime I launch the Component Inspector in the Zoomify Viewer
Component I get an alert saying: "Reference Error ZoomifyFileAPI is
not defined". This is one of several JavaScript errors and alerts
that frequently launch. I emailed [email protected] but so far no
reply.
Am really annoyed for three reasons:
1. Paid 129 USD for it
2. It is for client work!
3. Zoomify have as yet to respond

I have the same problem. (on Flash CS3 OS X) Bought it
yesterday for a project. Expected to get documentation with the
download. No response from support. I installed the component in
Flash MX2004 and get this error : ZoomifyFileAPI.fileExists is not
a function when opening the component inspector... At least I was
able to enter paths and get a first etst going.
Overall it looks buggy... and abandoned. Too bad. I like the
samples I've seen and I think there is a lot of potential for
development.

Abug in Flash CS3?

I'm having this problem using Flash CS3. I put a movieclip
called "my_mc" in frame 20 and put this code in the first frame of
my movie:
gotoAndStop(20);
my_mc.gotoAndStop(2);
This should put the header into frame 20 and show the second
frame of "my_mc", but it doesn't work and the output shows this
error:
TypeError: Error #1009: Can't access a property or method of a
reference to a null object.
at Untitled_fla::MainTimeline/Untitled_fla::frame1()
This works perfect in Flash 8 but not in CS3. I don't know if
it's a program bug or there is another way to make it work. Anyone
knows?

The thing is that I don't want to put code in every frame I
want a movieclip to do an action.
I need to manage all movieclips from a class outside flash in
order to have all more organized.
I can't beleave Adobe couldn't fix this problem yet, if the
idea of Flash 9 is to have everything more organized in classes,
and not putting code in different frames and timelines of the
movie.
Flash 9 should have something like a map of all timelines and
movieclips in those timelines, but it doesn't seem to have it.
For example if I have an mc called "myMc" in frame 10 and
want it to gotoAndStop(3) and want the mc in frame 3 of "myMc" to
gotoAndStop(5) and a movieclip inside it but not in frame 1 to
gotoAndStop(8), I can't put code inside every movieclip because it
would be a mess. The ideal would be to manage everything from a
single class outside flash and don't put code everywhere.

Need help: Open Flash 8 FLA in Flash CS3 Pro.

Need some help here.
I have problem using Flash CS3 to open Flash files which have
been done in Flash 8.
Every time when I open there will be a error message prompt
and the application (CS3) will automatically close.
Are we able to open the previous FlasH version in the latest
one?

Yes, Flash is downward compatible. The file might be corrupt.
What is the error message you receive?

[urgent]flash cs3 actionscript input lags on extreme fast pc

I have a problem with flash cs3
first let me tell me my specs of my pc:
intel core 2 quad 3 ghz (Q9650)
4gb ram
890 mb videocard
asus p5q motherboard
this is a very fast pc as you can see
but still it lags when i try to put some code in the main
timeline
when i have around 30 lines of AS the lagging begins :s
example:
when i type:
if(Key.isDown(Key.SPACE))
when i'm at SPACE, flash still is struggling getting Key on
the screen.
it's like flash has troubles handling the pc's speed.
i use vista, sp 1, flash cs3 and actionscript 2.0
who can help me?
this is a very annoying problem and i hope someone can help
me asap!
thanks!

I found the solution!
it's vista who makes it lag :(
i set the compatibily to windows XP and now it runs fast as
hell :D

Problem displaying dynamically loaded text in Flash CS3

I created a Flash CS3 application that does not display
dynamically loaded text (from internal AS3 scripts) on 3/6 of my
client's computers. All computers run IE 6 and Flash Player 9. I
cannot replicate the problem on any computer in my department. The
problem seems to be related to Flash Player 9 or a browser
setting/IT restriction. Has anyone encountered this? If so, have
you found a solution?
If I cannot find a solution, then I will need to almost
completely redo the application.
One slightly insane idea I have considered is to, if
possible, convert dynamically loaded text to an image real-time. Is
that possible?
Btw, I have created a font in my library. Should I try
manually embedding the font from the Properties menu and selecting
all characters?
Thanks in advance.

yes, even though you may be using a font from the library,
you still have to specify that each text field that uses that font
embeds the font, and you'll need to select all characters(well not
all, unless you require all the different scripts of the world -
upper-case, lower-case, numerals and punctuation usual suffices).
I bet if you checked, the computers where the font did not
appear did not have the font on their system.
Good luck
Craig

Problem in displaying Arabic text in flash cs3/cs4

Hi All, I'm creating one website. I have to display dynamic xmlize arabic text in flash. I have done it using flash cs3/AS3. But problem is that when text displays in flash it is not rendering as expected. Some gaps comes in the characters. But when I open my xml in browser, arabic text displays correct.
Is there any way to do it in flash cs3 or Flash cs4 using player 9? It would be really great if anyone can give me solution on this. Thanks
Chandrakant

You have to do it yourself - I don't have a ready solution. Just look into documentation how StyleSheets are used and see what properties work best for you:
http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/flash/text/TextField.html
http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/flash/text/StyleSheet.html
Also, with embedded fonts you need to play with TextFormat settings and AntiAliasType
http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/flash/text/AntiAliasType.html
In addition, on my machine even if I don't emebed fonts - Arabic works in Arial, TImes and others.

Text Skewing problem in FLASH CS3

Similar Messages

Maybe you are looking for