Text symbols are missing in SAP standard program
Hi All,
I am in very critical probelm I have standard program J_1I_EWT_MIS in that i have text elements are in english.
I dont have any access key but i want to transalte the text elements while tarnsalting it doesnt ask me for any access key.
Unfortunately i have overwitten all the text elemnts to another language all my text sysmbols were disapperared.
I dont have any solution now..
BUt i know that etx symbols which are disapperead.
Please advise me how can i proceed to get my text symbols.
Thanks,
Hi,
My problem is i have selections texts in standard program previously i have descriptions for that.
By mistaken all the texts were disappered and selection texts are existing.
Now i eant to enter selection text name for that.AS it is a standard program i can't change it.
Can you please give me an idea on this.
Thanks,
Swapna.
Similar Messages
-
What are the SAP standard programs?
Hi PM Guys,
I have a question that is as below:-
We have the following Master Data:
1) Functional Location
2) Equipment
3) Equipment BOM
4) Counter
5) Catalog Profiles
6) Task List
a) General Task List
b) Equipment Task List
7) Maintenance Plans
a) Time Based
b) Performance Based
Can you tell me the SAP standard programs available for the above master data which can be used for data migration of the above master data from the flat files into SAP system.
Thanks in Advance,
Vijaya KrishnaHI
you can find the standard program while executing the T code LSMW itself.
type LSMW ,specify the description in the next screen select the <b>Standard batch or direct input</b> under the heading you can find the in the field <b>object</b> use F4 to find all the standard programs in SAP
0400 Equipment
0410 Message (IH)
0420 Confirmation (IH)
0425 Measuring point
0430 Measurement Documen
0440 Functional location
0450 Object link
0460 Maintenance plan
0470 Equipment task list
0480 FnctnlLoc.TaskList
0490 Gen.task list
regards
thyagarjan -
All text behaviors are missing except Text Animation
Final Cut Studio 2 installed several weeks ago. I started up Motion 3 for the first time today. Upon clicking "Add Behavior" icon all of the text behaviors are missing except Text Animation. (ie. Text-Basic, Text-Fade, Text-Glow, etc). Am I missing something? Thanks.
Hi,
My problem is i have selections texts in standard program previously i have descriptions for that.
By mistaken all the texts were disappered and selection texts are existing.
Now i eant to enter selection text name for that.AS it is a standard program i can't change it.
Can you please give me an idea on this.
Thanks,
Swapna. -
How to add custom fields to the sap standard program ukm_bp_display
How to add new custom fields to the sap standard program ukm_bp_display .
could u please any one help me on this?Hello Kumar,
You have to modify below structure, as this structure is providing the field catalog for output display (ALV).
Here you can see there are a lot of include structures, so if you want to add fields in the output display you can add those fileds as an append structure to any of the below mentioned structures (Like ukm_s_account, ukm_s_bp_cms_sgm etc as per your requiremnt and positon at which you need to dispaly your fields.)
DATA: BEGIN OF gt_grid_alv OCCURS 0.
partner LIKE but000-partner,
credit_sgmnt LIKE ukmbp_cms_sgm-credit_sgmnt.
INCLUDE STRUCTURE ukm_s_account.
INCLUDE STRUCTURE ukm_s_bp_cms_sgm.
DATA: credit_sgmnt_txt LIKE ukmcred_sgm0t-credit_sgmnt_txt.
Gruppe Vector
INCLUDE STRUCTURE ukm_s_bp_vector.
Gruppe OBL = Obligo
include structure UKM_S_BP_CMS_MALUSDSP_OUT.
INCLUDE STRUCTURE ukm_s_display_segment.
INCLUDE STRUCTURE ukm_s_bp_cms.
INCLUDE STRUCTURE bus000_dat.
*DATA: icon(4).
Gruppe RAST (Raster)
DATA:
rast01 LIKE ukm_s_display_segment-AMOUNT_GRID,
rast02 LIKE ukm_s_display_segment-AMOUNT_GRID,
rast03 LIKE ukm_s_display_segment-AMOUNT_GRID,
rast04 LIKE ukm_s_display_segment-AMOUNT_GRID,
rast05 LIKE ukm_s_display_segment-AMOUNT_GRID,
rast06 LIKE ukm_s_display_segment-AMOUNT_GRID.
DATA: rast2_6 LIKE ukm_s_display_segment-AMOUNT_GRID.
"Summe raster 2 bis 6
DATA: END OF gt_grid_alv.
Another way is you can go to SE38, and you can create implicit enhancements.One enhancement point is available here in this required area. so create an implementation and add your fileds with data types.This way is also simple.
Hope this will solve yiour problems.
Regards,
Antony Thomas -
Error in script : text elements are missing
Hi ,
In my print programs iam uaing lots of text elements for a
zform. I have copied the zform into zform1 and using the same print program and modified the zform1 according to my needs.
I am not using all the text elements in my zform1 script which is passed from the print program.
When i execute my zform1 by using the transaction which inturn uses that print program it gives more messages saying 512, 513 , 515 text elements are missing in form Zform1.
Can anyone tell without touching the print program can i do anything on the script zform1 to reslove this problem.
Please help me on this.Thanks...
Regards,
Rose.Hi,
Ya, whatever Narendra told is right. U nedd to have the text elements in the script if you are calling the same from print program. Just maitain all the text elements with no text it.
Eg:
/: 513
/: 515
Regards,
KK -
Syntax error in SAP-standard program
Hi experts,
i am facing syntax error in sap standard program.how i can solve that error .
Error in include LFKPZTOP and errro is at line 70.
please help me ASAP.
Thanx & Rgds
ZebaHello Zeba,
go to include LFKPZTOP and check in line 70.
if you are not able to solve that.
post the same line, so that we can understand what is error.
as of my checking the error is "iban is already defined in the include structure bus0bk ,
but i think it dosn't effect your programing.
Regards!
Edited by: Prasanth M on Feb 10, 2009 5:04 PM -
How to fnd SAP STANDARD program of Database table
Hi to all,
Please can anybody tell me , how to find out SAP standard program of database Tables S070 (Breakdown Statistics).
As this table contain two filelds Time To Repair and Time Between Repair , i want to knew how the standard program for the table have calculate them.
i shall be thankfull to you for this.
Regards
Pavneet RanaHi,
Program for table is generated dynamically for each user ID, when ever you change the selection screen in SE16 or when you are executing the table entries for first time. Usually it starts with /1BCDWB/DB followed by table name. In your case it would be /1BCDWB/DBS070.
Go to Se16, enter your table name and click enter. Once you are in selection screen, goto Menu=>system=>Status. Here you can see the program name.
Thanks,
Vinod. -
Modification in SAP standard programs.
Hi All
I am trying to make modification in SAP standard program by using a copy of code from the original program to my program..but facing many errors like the statement BEgin of block syntax is wrong..
i am trying to mdify the foloowing program--RFSSLD00...
Please help me and guide to make changes to this prog..
Also tell me that do we need to again create all the functiongroup and global data declarartion part.
thank u.hi,
Please note that when you copy a standard Sap Program ,make sure all the objects are copied following your compays naming conventions.
Now RFSSLD00 can be copied without any difficuly.after that compare the new copied program with the standard program. going to version mngmt->remote comparison . doing this you can get the differences
check all the includes.. and type pool declartaion and gui status etc....by going to se80
regards,
Safel -
Do we any SAP Standard program to Send IDOC of Type CODCMT01
Do we any SAP Standard program for outbound processing for IDOC Type CODCMT01
Message was edited by: Vipin Nagpal- If it is for test purpose only, you could use transaction WE19 (Test Tool).
- As well you could write your own program and user MASTER_IDOC_DISTRIBUTE function module... but in this case you need to fill yourself the fields of the IDOC
- as well you can have a look at function group KALE...
E.g. function module K_DOCUMENT_SEND -
Can anybody tell me how many text elements are there in sap scripts?
hi all,
can anybody tell me how many text elements are there in sap scripts?Hi,
Do you mean that you want to know how many Text-elements are there in a specific Script or you want to know how many max Text-Elements a script can have?
I believe there is no limit on this......
To know all the Text Elements in a Script......goto SE71....press F4 Help on Script Name....Choose Last option for Custom developed Scripts.....and you can open the complete Script details & Code in a Line Editor...After that you can serach/look for the text elements -
Runtime Error In copy Of SAP Standard Program
How do people,
I have copied a SAP standard program H99CWTR0 because I need to add an extra
column output in the report. I have made a few chnages regarding the INCLUDES
When I run the program I am getting the following runtime error:
" The structure of the COMMON PART "DRIVER_DATA_EXCHANGE"
in program "%_T01050" is different from the calling program .....
My question is that it says the error in program "%_T01050" !!
But when I enter this in SE38 it says it doesn't exist !
Any ideas???
AndyThanks mate for replying.
I'll have a look at what you suggest
Andy -
When converting from docx to pdf, some text boxes are missing. Why?
I have a large docx file with many text boxes. The boxes have fill and borders. When I convert to pdf several text boxes are missing. The text is there but the box is missing. How can I prevent this from happening?
Hi,
Please share your file if possible so that I can look into the problem. Please use below link:
https://adobeformscentral.com/?f=qJiclooYWGGNFtWfj8g3wg#
thank you.
Hisami -
Addition of my code in sap standard program
hi gurus,
can i add my code in the sap enhancement below in sap standard program
i want add the logic below.
ENHANCEMENT-POINT MATERIALFINDUNG_10 SPOTS ES_SAPFV45P.
$$-Start: MATERIALFINDUNG_10----
$$
ENHANCEMENT 153 OI0_COMMON_SAPFV45P. "active version
IF NOT G_OIK_SUBMAT IS INITIAL. "SOTK000026 DN
TVAK-KALSU = G_OIK_KALSU. "SOTK000026 DN
CLEAR PRODUCT_SELECTION_REKURSIV. "SOTK000026 DN
ENDIF. "SOTK000026 DN
ENDENHANCEMENT.
when i click on enhance button(shift+F4) it does not give me any place to write.
but if i click on the enhancement name i am able create one implementation. is that ok.should i add my code there.Hi Kiran,
That is not the solution I am looking at. Also the link provided within the link you provided does not work which is:
http://www.synactive.net/site/index.htm
Do let me know if you have a solution to change the standard GUI status(Not by copying nor by using the access key) either by any menu exit or something of that sort.
Regards,
Deepak. -
How and where does SAP standard programs update the master tables...
Hello there,
How and where does SAP standard programs update the master tables...
to be precise.. if a (any) transaction occurs the programs behind it holds the data in temporary structures.
where and when does it get updated in the master table.
can anyone tell me how it happens?
I Know that from the where used list one can find the corresponding table but most of the time it wont suffice
I am expecting a proper answer.
Santosh BHello Santosh,
you need to do some self-reading on the following topic
Updates in the SAP System (BC-CST-UP)
http://help.sap.com/saphelp_47x200/helpdata/en/e5/de86e135cd11d3acb00000e83539c3/frameset.htm
Regards,
Siddhesh -
SAP standard program to delimits infotypes
Hi folks,
Is there any SAP standard program to <u><b>delimits</b></u> the records in HR? I mean for PA/PD infotype. Or I need to write one? I have to delimits some of the IT`s Like 194 and 185...
I found the following program to <b>delimit</b>
RPU204M0 IT 204: delimit report for FA customers
RPU510J1 Utility program to delimit P0008 after pay sclae re-creation
ThanksHi Saquib
There is one standard report called RHGRENZ2 which will delimt PD infotypes...
The report only delimits infotypes with time constraint 2 and 3. Infotypes with time constraint 0 and 1 must be delimited using the report Delimit Objects (RHGRENZ0).
Hi I don't see any Standard SAP program to delimit the infotypes that were specified in your message. I believe you may need to write small BDC program to delimit....
Thanks
Thanks
Suresh B Mannem
Message was edited by: Suresh Babu Mannem
Maybe you are looking for
-
I used to have iPod shuffle connected to a PC, I now want to use it on my Mac - I cannot get iTunes to see the shuffle at all - trid the 5 sec fix - no go. How can I now assign iPod to Mac?
-
Lens correction help needed: Nikon 14-24 used in model shoot...
Hello, I just finished a model shoot with 9 models standing in a horizontal line relative to the camera. Because of the very short working distance I had to use a Nikon 14-24mm lens to fit everyone in, resulting in the end girls being noticeably dis
-
Unknown error -50 in Store ?
Hello, I'm working in a radio company and I installed iTunes 7 in my pc but doesn't work correctly. I have a problem in my iTunes Store: "unknown error -50". Therefore I can't buy anything in the store. The search is ok! At home everything is ok. Whe
-
S/MIME with Detached Signature
Can anyone provide an example of how to create a PKCS#7 S/MIME message with detached signature (content-type: application/pkcs7-signature) Thanks
-
"Corrupt content from reliable source" during download
All, When attempting to download and install Flash 10.3, I'm greeted with the error message "Corrupt content from reliable source" during the initial download. The installer never gets to the "installing" phase, as it appears to hang while downloadi