Text turns off when i am adding in recipient

When I try and start a new text message and type in the recipients name the phone just takes me out of the message programme. The only way I can do it is to press the + button to access my contacts then search using the side scroll bar (again if i start typing the name in the search area it comes out of the programme) - why is htis - it's time consuming

The display is supposed to turn off when you hold the phone to your ear (so your ear doesn't touch any controls). If it happens when you are not holding it to your ear this usually means that your case is covering the sensor that turns it off when you hold it to your ear.

Similar Messages

On a 5s how do you make the light turn off when phone rings or when you receive text, at work I would like to shut that off. Also seems like vibrate doesn't always work?

On a 5s how do you make the light turn off when phone rings or when you receive text, at work I would like to shut that off. Also seems like vibrate doesn't always work? I had a 4s and didn't have these issues

Thank you, I did find that. Still my phone does not always vibrate when ringer is off for texts and calls, only sometimes?

Horizontal spry menu style appears turned off when on the internet though can view it in live mode!?

The style of the horizontal spry menu seems as to have been turned off when on the web though is visible and functioning on CS4 Dreamweaver design and live views. I have styled the spry menu and can view it in the properties section though the style setting is there on the internet it looks as if the styles have turned off and appears unformatted vertically when it should be a cascading horizontal menu bar. Not sure where the error is, I have looked at the coding and as I'm not the most experienced with spry.....
this is the coding above the head.
<script src="../SpryAssets/SpryMenuBar.js" type="text/javascript">
<link href="../SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />

</script>
I have noticed that SpryMenuBarHorizontal.css doesn't appear in the spry assets folder, does this matter? (not sure how to insert into the assets menu). Any help would be greatly appreciated!

thanks for testing it. I'm not sure how to proceed though as the css file is in my local_sites/spry assets folder for the website. I've tried to point it to other (copies of SpryMenuBarHorizontal.css) and spry assets folder externally from the site and again internally in the root folder and seems to make little or no difference.
Your suggestion of what it should read,(sorry to sound so naive at all this) though would you mind giving a step-by-step guide on how to go about it? as I'm obviously missing something in the setup process.
thanks again for your help.

Any fix to iTunes music turning off when iPad 1 put onto charging stand?

Any fix to iTunes music turning off when iPad 1 put onto charging stand?

Ok, I found a solution that worked for me when trying to connect to the iTunes store by tapping the "update" button in the "App Store" app on my iPad 2. Before the solution was implemented I'd always get the error message "cannot connect to iTunes store". Once the solution was implemented I now can connect to iTunes using the "update" button in the "App Store" app and I get the normal message "All apps are up to date". The solution is this: go into Settings, then General, then scroll to the bottom where it says Date and Time. Tap Date and Time and then turn OFF Set Automatically. When you do that a new option will be added that says Set Date and Time. Tap it. You'll now get a drop down feature. Set the Date AHEAD 2 YEARS. The Time you can leave alone.
Once you do that you might get a bunch of reminders and messages that your apps and stuff haven't been updated in two years. Click cancel or close on each of those messages or reminders. Now go back into Settings, General, Date and Time, and turn Set Automatically back to ON. Reboot your iPad. Open the App Store app again and go to the Update button. It might ask you to log back in to your iTunes account. It should now work. If not, close the App Store app completely and open again and try the update button. Hope this helps.

My iPhone 4S was turned off when the battery got empty, and when I put it on the charger it didn't charge at all. I tried restarting it (on/off home button for 10 sec) nothing happened except it kept giving me the "charge battery" on its screen.

Hi! My iPhone 4S was turned off when the battery got empty, and when I put it on the charger it didn't charge at all. I tried restarting it (on/off home button for 10 sec) nothing happened except it kept giving me the "charge battery" on its screen. I tried with different chargers, still dead! What's weirder is that my sister who has iPhone 4 experienced the same today! No we don't live in the same house!! Does anyone have the same problem?
Please apple support do you people have a convincing answer for us? Is there a solution? My phone is only 2 years old and was (2 hours ago), in top condition!!
Please help....

imanfromsweden wrote:
Please apple support do you people have a convincing answer for us? Is there a solution? My phone is only 2 years old and was (2 hours ago), in top condition!!
Please help....
On belhalf of my fellow volunteers, the answer is, "We'll try our best."
My advice is to try not to treat this like it is a paid service provided by compensated professionals. Ask nicely and one of the nice folks here might take some time out of their weekend to offer advice.

Macbook works fine when plugged in, turns off when unplugged.

Hello all,
As stated my 2008 Unibody 13 inch, serial number W8******1AX turns on and works fine when it is connected to power.
When it is unplugged it instantly turns off and turns its fans on full until it depletes the battery (so it is obviously getting power.. just not where I want it)
Since the problem began I have tried two new batteries, neither of which had any different symptoms.
Before this, the computer had an intermittent life, it would turn off when it saw fit, which got progressively worse.
I have followed the guides to resetting the SMC but have had no luck
I have been running it without the battery (to save it charging and discharging for no reason) and sometimes when plugged in without a battery
the magsafe green indicator light goes from dim to bright.
With the battery installed it stays bright orange until it is charged and then switches to bright green.
(I have tried it with another charger, same symptoms)
Here is the Battery Read out;
Battery Information:
Model Information:
Serial Number:          ?00€›Æ⁄¬+9tt
Manufacturer:          GSA-1280
Device Name:          ASMB016
Pack Lot Code:          3230
PCB Lot Code:          30db
Firmware Version:          ddae
Hardware Revision:          dac2
Cell Revision:          2b39
Charge Information:
Charge Remaining (mAh):          4113
Fully Charged:          No
Charging:          Yes
Full Charge Capacity (mAh):          4200
Health Information:
Cycle Count:          1
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          379
Voltage (mV):          12275
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          15
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          5
Automatic Restart on Power Loss:          No
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Wake on LAN:          Yes
Current Power Source:          Yes
Display Sleep Uses Dim:          Yes
PrioritizeNetworkReachabilityOverSleep:          0
Battery Power:
System Sleep Timer (Minutes):          2
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          1
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Display Sleep Uses Dim:          Yes
Reduce Brightness:          Yes
Hardware Configuration:
UPS Installed:          No
AC Charger Information:
Connected:          Yes
ID:          0x0100
Wattage (W):          60
Revision:          0x0000
Family:          0x00ba
Serial Number:          0x00ebc719
Charging:          Yes
Power Events:
Repeating Events:
Type:          Wake or Power On
If this at all helps.
I'm at my wits end with this thing, I know it is getting on in age, but other then this, it has been flawless in its operation.
If anyone has any suggestions I would be happy to hear them.
Many thanks!!
<Edited By Host>

There may be a hardware cause behind the symptoms you cite, so a diagnostic
is recommended to see which parts are weak or failed in the computer. A visit to
an Apple Store with Genius bar may be helpful, as they can perform testing there.
A call ahead or use their web page, to schedule an appointment, is advised.
In the US and Canada, the Genius bar at a retail Apple Store can perform
a diagnostic service, for no fee, even on Apple products without AppleCare.
See links:
Apple - Concierge
Genius Bar - Apple Retail Store:
http://www.apple.com/retail/geniusbar/
List of Apple Stores, cities, countries:
http://www.apple.com/retail/storelist/
Also authorized Apple service providers who can test, repair and guarantee their
work should be able to handle an out-of-warranty older Mac, within age limits...
Ones too old for the Apple Store could be serviced at a Specialist, instead.
•Find Locations - Sales, Service, Training, Consulting:
https://locate.apple.com/
•Did you try resetting the System Management Controller?
Intel-based Macs: Resetting the System Management Controller (SMC)
•A reset of NVRAM may help with some issues:
About NVRAM and PRAM
•Calibrating is part of maintenance, esp with older portables:
Apple Portables: Calibrating your computer's battery for best performance
•The power adapter can be problematic and cause issues, so there's this:
Apple Portables: Troubleshooting MagSafe adapters
Also another item, other than keeping the magnetic connections clean of
debris, grime, and corrosion, is to check the MagSafe Board or have it
checked as part of a greater diagnostic. This board is behind the port
that supplies the computer and the battery with power from the adapter.
When it partially fails or if/when one of the connecting wires or plug fails
you can find odd issues or partial use. The battery may charge but it
may not be able to power the computer, and other odd effects.
https://www.ifixit.com/Device/MacBook
In older portable Macs, this was generally called a 'DC-in board' and as
such, you could read about it in an iFixit repair guide for the MacBook
model you have. These vary so the matching article is recommended to
see if that is something you may want to try. But I would have diagnostic
testing done and avoid additional damages from attempted DIY efforts.
There have been a few reports of other failure on the logic board that
contributes to a partial failure of the charging system, so about all this
may do is troubleshoot around the failure without finding an exact cause.
However it goes...
Good luck & happy computing!

My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.

My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.

Sorry i mistakenly made this question. It was alright. No Problem At ALL

I'm sure your'e going to tell me I just need a new phone but maybe there is hope for my iphone 4. It will not charge past 66% (it's not the charger), it turns off when unplugged, and it will not even let me turn my wi fi to the on possition. Help!

'm sure your'e going to tell me I just need a new phone but maybe there is hope for my iphone 4. It will not charge past 66% (it's not the charger), it turns off when unplugged, and it will not even let me turn my wi fi to the on possition. Help!

Hi there 8472kck!
I have some information for you that can help you troubleshoot this issue a little further. That information can be found right here:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
and that information comes from this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

My ipod 5 turn off when im listening to radio. It is brand new.... I bought it just yesterday. :(

My ipod 5 turn off when im listening to radio. It is brand new.... I bought it just yesterday.
. please help

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Why won´t my display turn off when i call (iphone 4s ios 5.1)??

hi
i have a iphone 4s with ios 5.1
since i updated to 5.1 i have the problem that the display won´t turn off,
when i call with someone.
i have reset the iphone more than one time.
I don´t know what i can do more.
ps: sorry for my englisch

ach nee....
i have no protection on the iphone and i know the display turns only off when i hold it at my ear.
my problem IS that the display won´t turn off when i hold it at my ear.
This problem is since the update to 5.1!

How do I make my iPad turn off when the screen is covered?

My old iPad would turn off when I closed the cover but I cannot find how to make the iPad air turnoff in a similar fashion?

dpna wrote:
Yes it is a proper cover
If it is an APPLE COVER, perhaps it's not the one for that model. But, if it's not an Apple cover, then maybe the manufacturer hasn't set up the magnets the way they are supposed to be.
I'm going to quote from another post elsewhere ...
Are you using a genuine Apple cover or another third party cover?
It's the magnets in the cover which activate the lock/unlock feature to appear in your settings. In earlier iPads you could slide a magnet down the side of the iPad to find where the magnet activates and turn the feature on.....Apple have now changed how this works with the iPad Air. Whereas before there was only 1 magnet positioned in the cover for earlier iPads, it is now thought there are 2 with alternating polarity.
So if you want this feature you will need to buy an Apple cover or wait for third party manufacturers to get their magnets in the correct position.
If you do have a genuine Apple cover then there is something going wrong here....

My Ipodkeeps turning off when i turn it on and it goseto the apple logo

Myapple i pod keeps turning off when im on it and it goseto the apple logo

What computer? What version of OSX is running? Some information other than my car won't start.

TS1398 my iphone turned off when using wifi

my iphone turned off when using wifi

That sounds like you have internal damage in the SIM card slot. Try taking the phone to an Apple store for evaluation. Make a genius bar appointment first at http://apple.com/retail.

The home sharing always turn off when i try to see movie on my apple tv

Home sharing turns off when i try to watch movies on my apple tv

If your Apple TV is connected to your network via wi-fi, it could boil down to a range / signal quality issue. Are you able to stream any other services to the Apple TV without issues? If possible, connect the Apple TV with ethernet cable and see if that resolves your issue.

My iphone turns off when i am talking

my iphone3gs turns off when i am talking

Hi this post might help https://discussions.apple.com/thread/2782776?tstart=0

Text turns off when i am adding in recipient

Similar Messages

Maybe you are looking for