Text Type (short - long) in F4 selection help (web)

How can I change the the text type (short - medium - long) in the F4 help for a variable on the web? Currently the short text is always displayed and I want to show the medium text.
I had the idea the setting 'text type' (in rsa1\infoobject maintenance\ tab bex) is responsible for this, but changing this setting has no effect. I also tried to change this in the query designer (infobject properties \ display as), again without result.
The query is based on an InfoSet.
Thank you for your help!
Kind regards
Dirk

Hi, you can try to change the transfer rules setting matching the medium text from the source system to the long text in the infoObject and then change the infoObject text properties. I have the same problem with the infoObject with only the short and medium description. In the F4 i can have only the short description.
I hope it help
Alberto

Similar Messages

No longer option to select iPhoto web galleries to sync to iPhone

Why isn't the web galleries in iPhoto showing up under the Photos tab in iTunes anymore to sync to my iPhone? Only the main albums show for syncing. I always synced the web gallery albums too. This is annoying arghhh
~.

Follow Up:
This worked for me:
"iLife: Cannot See iPhoto Files in Other iLife Applications"
http://support.apple.com/kb/TS1192
It became more and more obvious that the problem was with iPhoto and none of the other programs. This is because I noticed I no longer had access to my iPhoto albums when selecting my desktop background. As a test, I opened iMove and noticed they didn't show up there either.
I followed the Apple support thread above, deleting the plist file, and then the xml file.
The note it mentions here is what happened to me:
"Some photos you import may have keywords already embedded within their EXIF data. iPhoto will attempt to add these keywords to your keyword list when you import the photo. However, if the keyword contains an unusual character, or is corrupted in some way, this may cause the XML file discussed above to become unreadable. In turn, this will make the iPhoto list come up as empty or blank in other applications. Renaming the keywords will help you to isolate which keyword or photo might be introducing this issue."
There was one corrupt file that created multiple keywords of the same name. I deleted the corrupt keywords through iPhoto:Preferences:Keywords. I also deleted the foul file.
Follow these instructions if you're noticing iPhoto albums not showing up in iTunes, as well as the other iLife apps.
Cheers.

'Text' of a variable in Bex selection screen

Hello,
We have a customer exit variable in Bex Query selection.it is mandatory,ready for input,interval which is on 0CALMONTH2.
In Bex selection screen i am not getting text of default/entered months.
for example: if default value is 2 to 4,then text would be FEB to APR.
what could be the reason?how to get teaxts of entered values?
(we have one more customer exit variable on 0CALMONTH2 which is single value and it shows text of enterd values in bex selection)
In web it is working fine.
Rakesh

Hi,
Try to create an another customer exit variable for 0CALMONTH2 with mandatory,ready for input,interval. refer the abap code of the another customer exit variable(single value variable) of 0CALMONTH2 which you have mentioned in the bracket and modify the abap code based on the selection - interval. hope it helps.
Regs,
Vachan

Adding a new long-text type to Material Master

We need to add a long-text type to Material master, in addition to Basic, Inspection and Internal comment texts.
What would be the best way to do this?
Is there configuration that will allow the generation of a new tab in MM01 - Additional data screen, along with Basic, Inspection etc or should we create a new Screen exit for the new Text type to be edited?
If a screen Exit is available could you please name it?
Thanks a lot for the help - in Advance.

Hi,
You can add your own tabstrip in material master and put your long texts on it.
Please have a look at transactions OMT3C, OMT3B, OMT3E.
All customizing for material master extention can be found in SPRO -> Logistics - General -> Material Master -> Configuring the Material Master.
Krzys

Amend Short & Long Text in GL A/c master

Hello All,
We created a GL account without reference to an eisting account at Chart of Accounts level. We do not attach it to any Company code. In this situation we are able to amend the short & long text of the GL account after it is saved.
But in case we create the GL account with reference to an existing account at CoA level not attaching it to any Co. code & saving it; we are now NOT able to amend the short & long text of the account. We are allowed to amend only the GL account group.
Please let me know by using what method we will be able to amend the short & long text of this GL account.
Thanks
Shreenath

Hello,
This short & Long text could be finally resolved by using transaction OB_GLACC13 - Mass changes
Kaustubh

I used to be able to increase the size font of the persons name sending me an email or text message. I have an iphone 5 and can no longer do that. Help!

I used to be able to increase the size font of the persons name sending me an email or text message. I have an iphone 5 and can no longer do that. Help!

Just the name? Don't ever recall that being a feature. However, for Mail and Messages (and a few other apps): Settings app > General > Text Size

Help! I recently upgraded to OS 10.9.4 from 10.6.8, and now when I want to send an email to a group in my contacts I am no longer able to select the group as a whole. I have to select each address individually. This can't be right.

Help! I recently upgraded to OS 10.9.4 from 10.6.8, and now when I want to send an email to a group in my contacts I am no longer able to select the group as a whole. I have to select each address individually. This can't be right. With 10.6.8 I used to be able to double click on the name of the group and they would all be selected. I've also noticed that my address book is now called "contacts." Thanks in advance for your help.

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
     Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).

Long Text to Short Text connversion in IW31/IW32

Hi Experts,
I am working on a requirement where I need to overwrite the short text for material description with the long text while creating the maintenance order in IW31/IW32.
Initially I thought of handling this in a implementation of BADI IWO1_PREQ_BADI in method DECISION_COLL_PREQ.
But this this method is gettign triggered when the paurchasing data is being entered and even before the long text is entered.
Once the order is ready to be saved, and once the user clicks on save I want to write this conversion where I can copy the long text into short text overwriting the material description in component tab of IW31/IW32.
Please check and suggest the BADI/userexits for thsi purpose.
Regards
Kishore

Hi Kishore,
Go to transaction SE24, class name CL_EXITHANDLER, go to methods, double click on method GET_INSTANCE.
Set a break point at
CALL METHOD cl_exithandler=>get_class_name_by_interface
EXPORTING
instance = instance
IMPORTING
class_name = class_name
CHANGING
exit_name = exit_name
EXCEPTIONS
no_reference = 1
no_interface_reference = 2
no_exit_interface = 3
data_incons_in_exit_managem = 4
class_not_implement_interface = 5
OTHERS = 6.
CASE sy-subrc.
Now run trasaction IW31, press f8 till you reach bfore save button, enter the long text and all, now press the save buttton, control will break if in case any BADi is there(I think there is), exit name and instance will give you the BADI details.
I think this is one of the simplest way.
Thanks and Regards,
Antony Thomas
Edited by: Antony Thomas on Aug 10, 2010 12:13 PM

Pages: I am trying to put an image to the background of text. When the image is selected I am unable to click on the Background option. Help.

Pages: I am trying to put an image to the background of text. When the image is selected I am unable to click on the Background option. Help.

Thanks for responding!!! Please help. In last years pages version it worked great!!!
Pages: 5.1
OSX: 10.9.1
Template: Just a Blank. I am working on a document that I created last year. Now just making edits.
Ben

Hi everybody, I am in Turkey on a long assignment, I need help solving a big problem on my macbook pro os 10.9.3. The other week my wife visited some website and now we have a redirect virus of some sort, and every other time when we click

Hi everybody, I am in Turkey on a long assignment, I need help solving a big problem on my macbook pro os 10.9.3. The other week my wife visited some website and now we have a redirect virus of some sort, and every other time when we click on a link or anywhere on the page we are redirected to this casino web site, https://casino.7bets10.com/tr/?from=hy9yKXD43jSC-8Oxbw4femNd7ZgqdRLk-dHJpeG9uaXR l. Its the same whether on Chrome or Safari. Does anyone have a solution, thank you!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*AutoCad \*dropbox \*GoogleDr\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Text type to PLD report ??

Anyone know how to bring the information from the row text detail from the form to the PLD report? Cannot find the help anywhere.
For example,
I open the new Sale order and create as the following..
Item1
Item2
Text
Item3
Text
Item4
When I print, it has shown
Item1
Item2
(blank)
Item3
(blank)
Item4
I don't know why it did not show up and it's blank.. plz let me know if you have any idea to help.
Edited by: MickeySAPB1 on Aug 12, 2011 5:13 PM

Hi,
You must add a DB type field in your PLD to retrieve the Text row.
Just follow these steps:
1. Add DB field into repetitive area of PLD
2. Select the new field
3. In the Field Properties form, select the Content tab
4. Source Type: Database (should already be selected)
5. Table: AR Invoices - Rows
6. Column: Text - Text
Save PLD and try it.
Regards,
Vítor

Hierarchy node text shows short text instead of medium text in WebI report

Hi,
We have created a simple Hierarchy suing Tx RSH1.
US -> North Carolina
South Carolinakey
Rest of America
Please note "North Carolina" is the medium text for the node while the short text which can contain max of 10 chars is "North Caro"
We have used and activated the hierarchy within the BEx query. Text display with "Medium Text" has been enabled for the InfoObject. The display on the BW report is as expected showing the medium text for all levels and all modes.
When a universe is built on the query and a WebI report is created based on the universe everything works fine other than than the Hierarchy text for different levels and nodes. Instead of showing the Medium text, the short text is getting display.
We took out the text object from the Universe in the Universe designer and went ahead with the key and medium text, but that did not help.
Is this a known bug? Is there a workaround for this issue?
We are on XI 3.1 SP3.
Rgds

Hi,
I am working on BO XI 3.1 SP2.
I have displayed the medium text for the hierarchy nodes as:
In my universe three detail objects(key, medium name and long name) gets generated for each hierarchy node.
I have copied the definition of L01 Medium name (detail object) in the L01 dimension object. similarly for other hierarchy nodes.
i.e. L02, L03.. etc.
Now the master data which have been loaded for the medium name will be displayed.
Regards,
Rohit

Titles- quick text display and long black spot

I am adding titles with text over black. I can't lengthen the time the title text stays in view without lengthening the total title time so that there's a long black space at the end. I don't see anything in the help section to address this. I'm working in "converge to center" effects.
Suggestions? I've done a dozen or so iMovies and love the tool---but for slower readers, this is a problem.
Thanks

Hi David - I assume you have the problem that your chosen title style allows only 2 lines before repeating the convergence with the next two lines, and the pauses are not long enough for your purpose.
The solution is to extend the length of the pause - but this has to be done with a work-around. You can do it by creating a still-frame of the paused part of the title, but the quality is not quite as good as the original.
There is a better way. This is what I did with your particular title style to extend the pause.
1. Drag the title clip to the desktop. this creates a .dv QuickTime file.
2. Open this file in Quicktime, move the playhead to the paused text, and go Edit>Trim to Selection.
3. Go Command>C (Copy) and then Command V (Paste) and continue to hold down those two keys until a suitable duration has been created - maybe 5 seconds.
4. Save As a self-contained movie, and drag that file back into the iMovie project, and place it in the appropriate position. [You will need to split the original clip at the pause in order to position it].
This has created a 5 second-long clip of the paused text which should be almost indistinguishable in quality from the original. Repeat the process for other pauses where needed.
It is much faster to do than to explain!!
Message was edited by: catspaw

Oracle Equivalent of MySQL's TEXT type

Does Oracle have an equivalent column type to MySQL's TEXT type?
I tried "long" data type . In php , it shows the warning " illegal use of long "
please help me to fix this problem.

Oracle DB has VARCHAR2 and CLOB.

Text is not copying into Header Text Type from Contract to Order & Invoice

Salute Masters!!
I have done related configuration in VOTXN for Sales Document & Billing.
After creation of Contract, given Text in New Header Text Type, itu2019s not copying into Sales Order or Invoice.
Although, which was configured earlier one, for that Header Text Type, text is copying into Order & Invoice both properly.
Firstly; I have given the same Access Sequence for the New Header Text Type, It was copying the same matter which was given into Old Header Text Type, then I have created new Access Sequence & assigned changed Access Sequence for the New Header Text Type, even then it is not copying.
I have checked other Configuration those are OK!
Assignment of Sales Document Type to Text Determination Procedure, it is OK!
Please provide the solution.
Thanks in advance.
Warm Regards,
Sanjai Srivastav

Hi
Hope the issue is resolved , if not please check these settings - VOTXN
1. Create Text Type for your Sales order -S001 and Billing Invoice - B001
2. Create Access Sequence - Z001.
3. Include your Both Text Type in respective Procedures.
Now
WHen you will assign the Text into your Text Procedure - Assign same Access Sequence in both the case.
In your Sales Order text procedure - Assign
1. Assign Text Type S001 and Access Seq Z001
2. Select the Access Seq on the left side in the VOTXN T-Code , a POP up will come and then input Your Access Seq into that
3. You will get another screen, Here give the Seq No-1 and VBBK Header Text and Again Assign TEXT type S001.
Now go to Invoice Text Procedure
1. Assign Text Type B001 and Access Seq Z001 and SAVE.
Once you will do that the step 2 and 3 will automatically get copy in the backend.
To Check
2. Select Access Seq on left side and in the Pop Up input access Seq. Now there you will see the system has copied the
fields from the Order.
Now try running the scenario. same you can do for Contract and Order.
Hopefully this will Help you.
please let me know if any concerns
Thanks
RB

Text Type (short - long) in F4 selection help (web)

Similar Messages

Maybe you are looking for