Text value is not displaying in filters area

Hello
I would like to display by Text instead of Key in filter Area. For that i have changed Display As a Test Even if i change the type of Display Text on of this filter, still i showing Key Value.
If the characteristics move in Free characteristics Are it displaying Text value.
Thanks,
Mohan

Hi,
Go to particular variable where you applied filter & change settings like below By default it will be text .
Check once after changing that setting it will show only key in selections.
Regards,
Seshu.P

Similar Messages

Text and images not displaying, but some are

I've uploaded my site, and images and text are missing. 4 pages are great, but the individual property pages are half empty (missing images, icons and text) Its a school project, so, yikes! www.icm-mp3.net/group17/
thank you in advance

I should clarify, it all worked fine on my own server. Now, on the schools site, its missing photos going across horizontally, the lightbox that goes with, a text box, an image embedded with links. The remaining elements are in their places. Could this be a server issue?
And, clever me, it is due tomorrow.

Text data is not displaying at Report level for an Infoobject Item name

Hi All,
Texts data is maintained at Info object level but text information is not displaying at Report level for an object. I have set the property at query level as "Text", but at report level it is displaying key values of the object, not displaying texts information. This problem occured in QA(Quality) system but not replicated in Production system. I have checked all properties at backend and query level and compared the same between QA and Production system didn't find any difference.
Please suggest what might be the cause: at report level it is displaying key values instead of the textual information even text data is mainintained at backend. In production it is displaying textal data for the IO.
Thanks in advance.

Hi All,
Thanks for your valuable information. I have changed the setting under Advanced tab as "Master data" for Access type for results values, but didn't solved the problem still it showing key information for the IO.
In Production system the report displaying texts information for the IO, but in QA its displaying key information. The problem exits only in QA, its working fine in DEv and Production.
As per my understanding might be the issue with Patches will be checking with Basis team on the same.
Please suggest if you have any alternatives to fix the issue.

The text which is in text node is not displaying in output in smartforms

Hi,
In smartforms i created a text node and entered some text like following.
     Target Quantity               60000001     60000002
     Scheduled Quantity               60000003     60000004
     So far delivered Quantity          60000005     60000006
     Last delivered Quantity          60000007     60000008
      Delivery Schedule Details
the text which i entered as above in the text node is not displaying.It is in main area.

Hi
if u are using table or template inside the main window
then just mention the position of the text element
goto text element - output options- output structure tab----give line and column no.
Thanks
krushna

List of values is not displayed in web inteligence report

I created a web inteligence report and put into my favourite folder. The report consist of a selectable list of values in a prompt but it does not appear in my favourites folder.
The users with administrator rights that copied this report into their own favourites folder are able to see the list of values in the prompt.
It seemed that the list of values does not display in the prompt when non administrator rights opened this report in their own favourites folder.
Anyone can figure out how to set the access rights so that non administrator can see the list of values when the web inteligence report is opened in their own folder.
I am using Business Objects XI 3.1 ..

SOLVED
     CMC -> Connections
-     Right click connection name, Click u201CTools > Check Relationshipu201D
-     In u201CQuery Resultsu201D, Right click Connections, Click u201CUser Securityu201D
-     Assign Security for u201CEveryoneu201D
-     UNTICK both Inherit from Parent Folder and Inherit from Parent Group
-     Assign u201CView on Demandu201D
     CMC -> Universes
-     Right click u201CUniversesu201D folder, click u201CPropertiesu201D
-     Under u201CUser Securityu201D, click Everyone and assign security
-     UNTICK both Inherit from Parent Folder and Inherit from Parent Group
-     Assign u201CView on Demandu201D

Account 'Contra account: Acquisition value' could not be found for area 01

Hi, everyone!
I am practicing in T-code ABZON.
I created one asset and purchased it. When I use T-code ABZON to acquisition with automatic, I cannot post because it has error: Account 'Contra account: Acquisition value' could not be found for area 01.
How can I fix it? can you help me?
Thanks for advices.

Hi,
Please use T-Code AO90 which will open a screen asking you to enter Chart of Depreciation.
After entering the Chart of Depreciation (COD), select the COD and click on the Account Determination which will open up the list of Account Determination. Select the correct Account Determination for the asset for which you were getting the error and click on "Balance Sheet Accounts". You will get the Depreciation Areas. Click on Depreciation Area "01" which will display the "Contra account: Acquisition value". Give the correct G/L account to pass the Contra Entry.
regards,
Chintan Shah
Edited by: Chintan Shah on Jun 24, 2010 8:24 AM

Total is not displayed in Result area

Hello Experts
I have an issue related to the result area display in a bex Query. in the query, one of the Formula Figure does not display the Total or Sum in the result area where as i have selected its propertyof summation in Calculate Result as.
The Formula figure contains the Formula variable in it & the formula variable is based on replacement path of an info object's key value.
kindly suggest the solution to get the Total value in result area.
I have also check the related issue in SDN but they are not helpful.
Thanks in advance
Neha

My ques is :
I have two key fig
                                         A1                         A2
MatA                                 1                             3
MatB                                  2.2                        4.2
MatC                                  1.6                       2
Total                                 4.8
Now properties for both key fig are same that is Cal result as is fixed with "Summation / Total/SUM" , but still in key fig A2 the total value is not displaying.
Please advice

Condition value is not displaying in sales order

Hi Friends,
when i am creating sales order, condition type(JEXP,JECP,JA1X..) is displaying in cond.type column and percentage(14%,2%,1%) is displaying in amount column and
the condition value is not displaying in cond. value column in conitions tab of sales order.
In analysis it is showing as condition record found...
please help me...
with regards

Hi,
can it be that you have a problem with units of measure? Often, if there is no value in Condition value, the problem is in the master data of material. Did you use standard schema? If you not, have you tried it with standard schema? What is your value under "per" and "UoM"?
Regards Thomas

Rate and accessable value is not displaying for the tax invoice output

Hello All,
Rate and accessable value is not displaying for the tax invoice output. Rest of all outputs for invoices shows Rate and accessable value.
Scenerio is free of charge sales order (samples) removing the goods from pant so excise invoice has been created and also updated. but for tax invoice out put rate and access value is not displaying.
Pricing procedure: In pricing procedure account keys have not been maintained because there is not gl account upadation during billing for free of charge delivery.
Thanks & Regards,
ramesh

hi Gurpreet,
You can add values to that transient column programatically,either by getiing the row from the iterator and then row.setAttribute('Column_name','Value');
Or providing value to it in the SQL...

Some Text Messages do not display when using large font on iphone

When using increased font size (accessability function) on iphone some text messages will not display. The iphone just seems to lock up. If normal font size is used text massage displays with out any issue. When font size is increased, text message will not display again.

Hi Peter
Actually, Captivate does have an essentially unlimited number
of undo levels. But that number may appear to be different. The
number of levels starts when you begin editing the project. If you
close and re-open a project, that starts the undo process over.
I've tested and I gave up after about 280 or so undos.
Where Captivate doesn't allow an undo, it normally warns you
with a rather catastrophic looking dialog.
Cheers... Rick

Hi.. I got some problem when i want to type something , letters are not displaying immediately , they are displaying after some seconds. can you help me out

Hi.. I got some problem when i want to type something , letters are not displaying immediately , they are displaying after some seconds. can you help me out

Hello:
I am not being critical, but you seem to want Safari to behave exactly like Chrome. Every software developer has a plan. Sometimes features in one product parallel other products - sometime not. There might be some things available that would help you. Do not hold your breath, however, for suggestions from people who use these forums. Most of us use (and like) Apple products. If you wish to make suggestions for future improvements, there is a feedback area on this web site that Apple employees read/review.
Candidly, your approach would be akin to suggesting that Apple emulate the "features" in Windows (heaven forbid).
I use Safari (and have for years). I use Firefox (not a bad product) as my alternate browser.
Sorry for what appears to be a pedantic lecture. However, I think most of us adapt to different products if we really want to use them.
Barry
Message was edited by: Barry Hemphill

Explorer Measure Values does not display as in BW

I have developed some of the explorer reports based on BW queries. The Measure values display correctly in BW query , but the value is not displayed correctly in explorer if I add multiple dimensions in the Info space
If I add only one dimension Eg:- Calender Year in infospace the result of the explorer matches with the BW query but if I add mor ethat 1 dimesnion , if I have added Region , Country to the infospace and then drill down the result by any of teh dimesion the result does not match
Thanks

Hi Merhan,
Yes, that would probably solve the problem. However I do want the actual <pattern> to be in there to access it in JavaScript.

Values for htmldb_item.text field do not display in CSV output

HTML DB experts,
I have a report query with the following 2 items in the SELECT statement:
wwv_flow_item.display_and_save(2, DOC_CD, 10) DOC_CD,
htmldb_item.text(3, DOC_DESC, 50, 255) DOC_DESC
I have enabled the CSV output for this report. The problem is, when I generate a csv file, only the DOC_CD (wwv_flow_item.display_and_save) displays. The values for the DOC_DESC (htmldb_item.text) do not display. What do I need to do to get the DOC_DESC to display?
Thanks for your help.
Message was edited by:
[email protected]

Items rendered using htmldb_item generate HTML tags on the form, not plain text. You are right, the CSV export excludes them.
Your best best is to create another report region on some other page with the same query except replace all the htmldb_item() calls with regular columns i.e. make it a read-only report and use the "export: CSV" template and put up a link to this page at the bottom of your editable report (instead of the builtin CSV link). This way when you click on this link, it will generate your report and immediately offer to export it to CSV
Hope this helps.

Text value is not getting displayed in Query designer !!

Dear experts..,
i have created a new query in query designer using my info provider and then selected one field in default value and then trying to restrict that particular field while selecting the restriction in query designer am getting the exact text value but after generating the report instead of text value , key value is getting displayed....so how can i get text instead of key value??
please help me friends....
i have posted in OSS mesage also...i got a reply like...even i didnt understand his reply too...what he is trying to say?
whether can i get text display or not???
can any one help me in this regard???
SAP Reply----
Hello kumar,
After another analysis I have to inform you about general concept of
"compounded characteristics".
A compounded characteristic bounds two characteristics. The technical
name is generated by both technical names of the two characteristics
combined by two underlines "__".
An individual text is only available for one single combination of both
characteristics.
Example:
=======
Compounded characteristic "Famous family name" is a combination of
characteristic "COUNTRY" & "ETHNIC". Technical name: COUNTRY__ETHNIC
Values for Country: USA, Australia
Values for Ethnic: Asian, Latino
Possible value combinations with individual text:
USA & Asian; text: "Ling"
USA & Latino; text: "Sanchez"
Australia & Asian; text: "Chu"
Australia & Latino; text: "Garcia"
(Keep in mind the individual text only valid for the specific
combination.)
In analogy to the issue that you reported, you want to restrict this
compounded characteristic. In the window where you select the restrictedvalue (called Selector) you'll see on the left hand side all available
combinations of the characters with an individual text.
You select family name "Chu" and drag'n'drop it to the right side.
Actually you can only restrict the right compounded characteristic. In
our example you would restrict on characteristic "ETHNIC" with value
"Asian". (When you switch on technical names this comes more clear). Thetext "Chu" is displayed in the context of Selector because you selected
value combination Australia & Asian. But in the end it's just a
placeholder(!) for any combination of characteristic "ETHNIC" and value
#Asian#; in our example it could be USA & Asian "Ling" or Australia &
Asian "Chu").
By leaving the Selector the individual text is gone because now the
context is lost between the two characteristics. You have just a
restriction on characteristic "ETHNIC" with value "Asian". An individualtext can't be displayed because the compounded characteristic is not
specified for this restriction.
You're right, it is confusing when "loosing" the text of a restriction.
But accoring to the concepts of the compounded characteristics it
is a correct behavior.

Hi anandkumar,
I belive this issue can be resolved by changing the Query proprties for the perticular field.
Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
__Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
Hope this helps you!!
Best Regards,
Maruthi

Img alt="text" not displayed when images are turned off in Safari

I have tried to search this, but every search has returned too many posts, so I apologize in advance.
Have I made some error or is there an issue with my Safari? For some reason my Safari does not display alt="text" when images are turned off?
This is what is supposed to happen (see http://www.w3schools.com/tags/attimgalt.asp) and it works fine in my other browsers (Opera, FF), but with Safari I get nothing - no image, no alt text, no indiciation that an image is supposed to be in that place. According to w3c, Safari is supposed to be compliant.
There is no problem with the site itself, I am designing the site and test with and without images to see how it degrades. As I said, it works properly in Opera and FF - the alt="text" text is displayed in place of the image - but not in Safari.
Is this just my Safari? How do I fix this if it is?
Is it Safari in general? If so, how do we get it fixed, because this is clearly just not correct?

It's not just you. I see the same thing in my Safari. It appears to be a Safari problem, in which case the best thing to do is submit feedback to Apple's developers via the Mac OS X feedback form. (You will not receive a response, as that page notes, but the feedback will get to the people who can use it.)

Text value is not displaying in filters area

Similar Messages

Maybe you are looking for