Text Variable replace with Customer Exit Variable

Dear Experts,
I created a text variable based on replacementh path (instead of customer exit). The reference characteristic is same that as my customer exit Variable and replace it by Key.
I want to replace it with already Existing Customer Exit Variable but it is not displaying in the List Box even though existing variable option is mandatory.
Can any one Suggest me the answer for this.
Regards
Supraja.K

I do not think you can select Customer Exit variable, if you see the type is selected to Char Value Variables and it is not editable.
It would be suggested to go for Customer Exit procesing type for your text variable.
Cheers,
Neel.

Similar Messages

Authorization (rsecadmin) with customer exit variable

Hello,
I need to maintain authorization on 0CALMONTH with a customer exit variable.
0CALMONTH is "authorization relevant"
I created a variable of type "customer exit" : ZVAR001 (this variable is OK, I checked its value in a query)
I created a new authorization object with 0CALMONTH = $ZVAR001.
When I run my query I have a message due to authorization error.
If I change my authorization object by replacing my variable ($ZVAR001) by a constant value I have no authorization problem.
I don't understand why...
Error logs don't help me to solve my problem : I have the following message "Message EYE007: You do not have sufficient authorization" and system just says I have "0CALMONTH I EQ $ZVAR001 " but doesn't precise values under variable ZVAR001
Thanks for your help

Indeed problem was in costumer exit because I used condition with "I_STEP". Since I have delete my condition I have no authorization problem with my variable....

RSCRM: Query date with customer exit variable

Hi All,
Is there any way to run the RSCRM transaction with a query with a customer exit variable for a date characteristic?
The issue is that the query ran ok but the variable is not being updated when the RSCRM query is running with a background job or a process chain.
Thanks in advance
EV

I do not think you can select Customer Exit variable, if you see the type is selected to Char Value Variables and it is not editable.
It would be suggested to go for Customer Exit procesing type for your text variable.
Cheers,
Neel.

Problem with customer exit variable in BeX Query

Hi All,
We have created a customer exit variable in a query and populated with few patterns in customer exit.
My query has to bring all the records where the address line is containg the patterns passed through customer exit. Here the query is not working as expected.
It is bringing the values where the address line is exactly same as the pattern and not bringing the records where the pattern is part of the address line.
For example: Pattern passed in customer exit = 'HOSPITAL'
The record where address line = 'HOSPITAL' is shown in the rpeort, where the record with address line = 'HOSPITAL ROAD' is not shown in the report.
I would appreciate your help on this.
Regards,
Rakesh

Hi Diogo,
Below is the code I am using in the customer exit.
SELECT * FROM zae_tt_pbuild INTO TABLE gt_pbuild.
      IF sy-subrc = 0.
        LOOP AT gt_pbuild INTO gs_pbuild.
          CONCATENATE '*' gs_pbuild-pbuild '*' into lv_pattern.
          ls_range-low = lv_pattern.
          ls_range-sign = lc_sign_i.
          ls_range-opt = 'CP'.
          APPEND ls_range TO e_t_range.
          CLEAR: ls_range,
                 lv_pattern.
        ENDLOOP.
      ENDIF.
     ENDIF.
I have tried using '%' instead of '*' aswell but the result is same.
Thanks,
Rakesh

Problem with customer exit variable that is input ready as well

Hello all,
I'm facing an issue with a customer exit variable that again has been defined as input ready. I'm not sure why it is working incorrectly and I#m wondering if this is a bug or if I do s.th. stupid.
The problem is that in the exit program ZXRSRU01 this varibale does not go into the program code I have prepared for this variable. I have added entry points for all three i_step values 1,2,3, but the code will never be touched and in debugging I can see that it simply pypasses the code for this variable.
I have tried to enter a value or to leave it blank, no difference.
When I run another test by just using a customer exit variable w/o input ready capability, then I have no issue, the exit does exactly what I have coded.
Does this mean, that a customer exit variable along with input readiness dows not work ?????
You may ask why I need this variable. Well, my intention is to use the input value of this variable A to derive other values for a complete different variable B. Afterwards I want to erase the input given into variable A to have it blank.
Any comments are appreciated
Thanks

Hi Heiko,
I assume A & B variables are defined on different Characteristics. If you wish to derive B based on A, you can create the Query Characteristic Restriction on B & have a dummy RKF restricted on A whose processing is by Manual Input; where processing of B is by Customer Exit. In istep 2 you can check for B, read A & derive B. There would not be a need to blank out A since the Query would not be restricted on A - you can hide the dummy RKF from showing in the output. Just a thought.
--Priya

Authorization with customer exit variable (CP, BT, EQ)

Hi SDN-Experts,
I have a question concerning the new authorization concept.
I created an authorization for 0COSTCENTER which also contains the 3 special characters 0TCAACTVT, 0TCAIPROV and 0TCAVALID. I inserted a customer exit variable for 0COSTCENTER. The exit reads datasets from a db table which contains authorizations for the actual user. The authorizations have different formats, e.g. "1000", "1000;1200", "25*" etc.
The internal table e_t_range is filled as followed in the exit:
i   eq   1000
i   bt   1000   1200
i   cp   25*
This does not work. It works if I only use "eq" OR "cp". But not both at the same time.
How can I achieve to use the different authorizations in the db table for the bi authorization?
Thanks in advance...
Joerg

Hi Olivier.
Yes, the variable is defined as selection option and I did also try to use "EQ" instead of "CP".
I tested again with another variable which is "ready for input" and is not used in an authorization. The Variable is filled in the customer exit. This is the code:
WHEN 'ZJGR_COSTCTR_TEST'.
l_s_range-sign = 'I'.
l_s_range-opt = 'BT'.
l_s_range-low = '0000001000'.
l_s_range-high = '0000001200'.
APPEND l_s_range TO e_t_range.
l_s_range-sign = 'I'.
l_s_range-opt = 'CP'.
l_s_range-low = '0000002*'.
APPEND l_s_range TO e_t_range.
The result in the variable screen in BEx Analyzer is the following:
1000 - 1200;0000002*;
And it still does not work. It seems that you could not mix EQ, BT and CP. But this is exactly what I have to do with the authorization variable...
Do you have any other tipps that I might try out?
Thanks,
Joerg

Problem with customer exit variable

HI i have created a customer exit variable to rread a table based in user input and pass it to my variable , every thing works fine but i get a waring message in my WAD saying
RANGE-LOW for customer exit variable ZVSO_PRM corrected to # BRAIN 746
Does any one have any idea why is it comming
my code is as follows
WHEN 'ZVSO_PRM'.
IF I_STEP = 2.
DATA: BEGIN OF ZPROD_MODEL OCCURS 0,
I_PROD LIKE ZCURR_PM_T-/BIC/ZPRODMOD,
END OF ZPROD_MODEL.
DATA: BEGIN OF ZREGIO_TABLE OCCURS 0,
REGION LIKE ZCURR_PM_T-/BIC/ZREGION,
END OF ZREGIO_TABLE.
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZREG02'.
CLEAR L_S_RANGE.
ZREGIO_TABLE = LOC_VAR_RANGE-LOW.
APPEND ZREGIO_TABLE.
ENDLOOP.
LOOP AT ZREGIO_TABLE.
SELECT /BIC/ZPRODMOD FROM ZCURR_PM_T INTO TABLE ZPROD_MODEL WHERE /BIC/ZREGION = ZREGIO_TABLE-REGION.
APPEND ZPROD_MODEL.
ENDLOOP.
SORT ZPROD_MODEL.
CLEAR L_S_RANGE.
LOOP AT ZPROD_MODEL.
L_S_RANGE-LOW = ZPROD_MODEL-I_PROD.
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'EQ'.
APPEND L_S_RANGE TO E_T_RANGE.
ENDLOOP.
ENDIF.

Could it be that the code doesn't find any value in ZCURR_PM_T table for the specified input region?

Problem with customer exit variable on date range

Hi All,
I have customer exit variable on date range. In the selection screen it has to give the week range as a default (05/21/2009 to 05/27/2009).
Earlier its working fine and from yesterday onwards it is not working properly. yesday onwards default date range was not displaying in selection screen.
Wht would be the problem.
Thanks in Advance

Hi Ashish,
I checked every thing what u told earlier. Every thing is fine.
And another thing is
I have routine in infopackage level. Since day before yesterday it was working fine and yesterday onwards it was not working.
Eg: budat will take the data based on routine for the week. But yesterday onwards it is not picking up the data.however I have the data in datasource for the week.
Wht would be the problem. I debuged the code and its working fine.
Sekhar

Error With Customer Exit Variable

Hi,
I need To Create Customer Exit For Text Variable based on Two Input Variable values.
can any one correct my code Code is written below based on quarter and Fiscalyearvarient.
I have to get calmonth Text value.
I am getting the error as : "I_T_VAR_RANGE" is a table without a header line and therefore has no
Component Called "0PERIV".
DATA : l_s_range TYPE rsr_s_rangesid,
        loc_var_range LIKE rrrangeexit.
IF i_step = 2.
CASE i_vnam.
   WHEN 'ZTXT_CML' .
      CLEAR: l_s_range.
      LOOP AT i_t_var_range INTO L_S_VNAM WHERE vnam = 'ZQUAR' AND vnam = '0periv'.
        IF i_t_Var_range-0PERIV = 'IE'.
          IF i_t_var_range-ZQUAR = '1'.
            l_s_range-low = 'APRIL'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
          ELSEIF i_t_var_range-ZQUAR = '2'.
            l_s_range-low = 'JULY'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
          ELSEIF i_t_var_range-ZQUAR = '3'.
            l_s_range-low = 'OCTOBER'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
          ELSEIF i_t_var_range-ZQUAR = '4'.
            l_s_range-low = 'JANUARY'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
          ENDIF.
        ELSEIF i_t_var_range-0PERIV = 'K4'.
          IF i_t_var_range-ZQUAR = '1'.
            l_s_range-low = 'JANUARY'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
          ELSEIF i_t_var_range-ZQUAR = '2'.
            l_s_range-low = 'APRIL'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
          ELSEIF i_t_var_range-ZQUAR = '3'.
            l_s_range-low = 'JULY'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
          ELSEIF i_t_var_range-ZQUAR = '4'.
            l_s_range-low = 'OCTOBER'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
          ENDIF.
        ENDIF.
          APPEND l_s_range TO e_t_range.
      ENDLOOP.
ENDCASE.
ENDIF.

Hi Supraja,
You would have to declare I_T_VAR_RANGE internal table as the table with an header line.
This you will find in data declaration segment.
ie
DATA : I_T_VAR_RANGE type <table name> WITH HEADER LINE.
or
Create a work area like l_s_var_range.
Use work area while performing operations in your code and later append the record to the table i_t_var_range.
DATA : L_S_VAR_RANGE type i_t_var_range.
Also, i_step = 3 is the right one, because you are processing the customer exit based on the values of the user input of two variables.
Modified code below.
DATA : l_s_range TYPE rsr_s_rangesid.
DATA : L_S_VAR_RANGE type i_t_var_range,
loc_var_range LIKE rrrangeexit.
IF i_step = 3.
CASE i_vnam.
WHEN 'ZTXT_CML' .
CLEAR: l_s_range.
LOOP AT i_t_var_range INTO l_s_var_range WHERE vnam = 'ZQUAR' AND vnam = '0periv'.
IF l svar_range -0PERIV = 'IE'.
IF l_s_var_range -ZQUAR = '1'.
l_s_range-low = 'APRIL'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ELSEIF l_s_var_range -ZQUAR = '2'.
l_s_range-low = 'JULY'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ELSEIF l_s_var_range -ZQUAR = '3'.
l_s_range-low = 'OCTOBER'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ELSEIFl_s_var_range -ZQUAR = '4'.
l_s_range-low = 'JANUARY'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ENDIF.
ELSEIFl_s_var_range -0PERIV = 'K4'.
IF i_t_var_range-ZQUAR = '1'.
l_s_range-low = 'JANUARY'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ELSEIF l_s_var_range -ZQUAR = '2'.
l_s_range-low = 'APRIL'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ELSEIF l_s_var_range -ZQUAR = '3'.
l_s_range-low = 'JULY'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ELSEIF l_s_var_range -ZQUAR = '4'.
l_s_range-low = 'OCTOBER'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ENDIF.
ENDIF.
APPEND l_s_range TO e_t_range.
ENDLOOP.
ENDCASE.
ENDIF.
Hope it helps,
Best regards,
Sunmit.

Help with Customer exit variable

Hi Guys,
     I need your urgent help. I have a requirement where I need to create a variable (on CALDAY) in a report which should use the input value given for another variable (created on CALMONTH). To put in words more clearly, CALMONTH is a variable that is mandatory for input but the CALDAY variable should not appear on the selection screen. I was told that I should write a customer exit to make this happen. So can someone please explain me the process of creating a customer exit and give me the code.
WHEN CALMONTH values are selected to be 07/2006 - 08/2006... CALDAY values should be 07/01/2006 to 08/31/2006.
CALMONTH is user entry, mandatory, range and multiple selection variable.
Early reply is highly appreciated and duely rewarded. Please let me know if I am not clear about the requirement. Thanks a bunch in advance.

Let us say, user enters multiple ranges for the month, you would want corresponding date ranges for the same, right?
data : w_date like sy-datum.
case I_VNAM.
when 'ZCALDAY'. " Calday var
loop at i_t_var_range into LOC_VAR_RANGE
     where iobjnm = 'ZCALMONTH'.
WA_RANGE-SIGN = 'I'.
wa_date+2(6) = loc_var_Range-low.
wa_date+0(2) = '01'.
wa_range-low = wa_date.
if loc_var_range-high eq space.
    WA_RANGE-OPT = 'EQ'.
else.
    wa_range-opt = 'BT'.
    wa_date+2(6) = loc_var_range-high.
    wa_date+0(2) = '01'.
    wa_date = wa_date + 31.
    wa_date+0(2) = '01'.
    wa_date = wa_date - 1.
    wa_range-high = wa_date.
   endif.
   append wa_range to e_t_range. clear wa_range.
endloop.
endcase.
This should do.

How to change a Manual Input variable into a customer exit variable?

Hello,
I need to change the "processing by" option of an used BEx variable from "Manual Input" to "Customer Exit" but this field is not available (= in grey) in modification.
Does it exist a tip or a standard program to modify this no-accessible field of an existing BEx variable?
Thanks in advance for your answers,
Samuel

Hi,
I don't think it's possible (unless tweaking some parameters directly in some tables, as stated in the previous post) so you would have to create a new one and replace it.
Hope it helps,

Problem with Bex Customer Exit Variable

Hi Friends,
I have a customer exit variable which is getting filled based on the User Input. I have written the code inside the If condition checking i_step = 2. The code is working as required.
But the problem is when I try refreshing the query or change the user variable selection, the Customer exit variable is not changing. I tried to debug the code and realized that the values for the exit variable based on the previous selection is not cleared and the i_step = 2 is not being executed for the variable.
While I close and reopen the query, the code is working fine.
Does anyone know why this is happening? Please suggest..
Thanks in advance..
Regards,
Priya

Hi Binu,
Here is the code sample. I am trying to populate the month based on the input Week number '0I_WEKIN'
. For eg. If I give 37.2011, the month value should be 08.2011. If I give 39.2011, month should be 09.2011.
WHEN 'ZC_MONTH'.
    IF i_step = 2.     "after the popup
        READ TABLE i_t_var_range INTO lw_var_range WITH KEY vnam =
    '0I_WEKIN'.
       IF lw_var_range-high IS NOT INITIAL.
          l_week = lw_var_range-high.
          l_week = l_week - 3.
          CALL FUNCTION 'WEEK_GET_FIRST_DAY'
            EXPORTING
              week = l_week
            IMPORTING
              date = l_date.
          lw_range-low = l_date+0(6).
        ENDIF.
        lw_range-sign = 'I'.
        lw_range-opt = 'BT'.
        APPEND lw_range TO e_t_range.
    ENDIF.
Regards,
Priya

Variable with customer exit

Hello,
I have created a query with customer exit variable.this variable calculates cumulative month from the beginning of the year. this variable depends on another regular variable 0PCALMON (single value, mandatory). i also use this variable in the query to show the month itself.
<b>the problem is as follow:</b>
until yesterday the 0PCALMON variable pop up normally, but now the variable doesn't pop up at all!
Does anyone have an idea?
Thanks,
Maya

Hi,
The variable may be personalized with some value.
<b>To remove the personalization for a user:</b>
Step 1: RSA1 -> Search for ODS 0PERS_VAR
Step 2: Manage -> Contents ->selective deletion
Step 3: Put the user to remove the personalization
http://help.sap.com/saphelp_nw04/helpdata/en/01/42c73c13b0ce5be10000000a114084/content.htm
Regards
Happy Tony

Default value of BeX customer Exit variable not Displayed in WeBI??

Hello Experts,
We are stuck with a problem where WeBI report is created on top of BeX query and we are not able to see the default value of Bex Customer exit variable in WeBI run. Here is the complete scenario:
1. One restricted KF is created in BeX, restricted with Customer exit variable on net Due date. And this variable is mandatory, ready for input, and Default value in calculated is user exit as current Week's Monday.
2. So, by default KF data should be restricted to Monday of current week, if user does not change this value.
3. Now, WeBI report is created on top of this Bex query, and all is working fine, i.e. we are getting variable as Prompt in WeBI, but Default value is not shown while Running the Webi Report.
So, need your inputs on the same, if default values from BeX in WeBI is supported or not? If yes, why this is happening, and how to resolve it?
Please notice, the restrcition is in KF only, it is not a separate restrcition on Net Due date in Filter area or in Defualt area of BeX
and we are on SAP BW 7.1 and BOXI 3.1 SP4.
Regards,
Vipul
Edited by: VIPUL GOYAL on Nov 23, 2011 9:44 PM

Hi,
See 1285993 - Support of Customer Exit Variables from BEx query into WebIntelligence via OLAP universe
WebI will prompt when executed, but the default values calculated by the user exit - do not appear.
Note: If the BEx variable has property 'ready for input' set / enabled, then its WebI prompt shows ok, but no default value appears.
Cause
This behaviour expected 'by design' (in the context of the product's current limitations) as explained in the online guide below:
Please refer to Chapter 7, page 44, document link here: http://help.sap.com/businessobject/product_guides/boexir3/en/xi3_sap_olap_universes_en.pdf
Characteristic variable > processing type > Customer Exit is "Supported, without user entry"
--> This should be understood as meaning "User will not be shown a prompt"
regards,
H

Behavior of customer exit variables (used as prompt) in a workbook

Hi All,
We are on NW2004s. I am using a customer exit variable in the prompt for my query then saved the query as a workbook.
1. When I run the query the customer exit routine/program is called and the selection screen variable is populated with the correct value.
Ex. Calendar year variable is a prompt variable defined as customer exit variable that gets the current year.
when you run the query the prompt for calendar year shows "2007" as default value. this is correct.
2. when I run the workbook using this same query, it looks like it is not executing the customer exit program. The value in the calendar year prompt is whatever the last value used when the workbook was last ran.
I also placed a breakpoint in the customer exit program (EXIT_SAPLRRS0_001) to check if it is being called and it looks like it isn't.
Is there a configuration/property that I should enable/check to make sure that customer exit variables used as prompts works in workbooks? Is this a bug? Anybody else have issues with using customer exit variables as prompts in their workbooks?
Thanks in advance,
Malou

Hello Marilou,
See the abswer I got from the 1st response on my question
Save and reuse variable option in 7.0
It may be a good help.
Variables seem to be an understated item in the documents.
Kind regards
Message was edited by:
BI developer

Text Variable replace with Customer Exit Variable

Similar Messages

Maybe you are looking for