Text visible in preview but not when uploaded.

I'm designing a mobile site in Muse.
The fonts I'm using are from the Museo family through Typkit.
I've uploaded the site a few times during the design process and had no trouble with text frames or text appearing.
Yesterday I added a new text frame in one section to link to a phone number and now sections of text are not visible when I upload the site. It is, however visible in the Muse preview!?
I've tried creating the text boxes from scratch but they still disappear in that particular section of the site.
Does anyone know why this is!?
The pale grey line is the text box where the text should appear.

Hi Michael,
It works fine at my end, please try clear browser cookies/cache and then check. If possible, check this on a different device and see how that goes.
- Abhishek Maurya

Similar Messages

  • Dynamic text works in preview but not when uploaded

    Can someone help me resolve as to why my dynamic text works
    in DW8 preview by I get an error after FTPing the page.
    Warning: require_once(/Connections/oneandone.php)
    [function.require-once]: failed to open stream: No such file or
    directory in /homepages/0/dxxxx/htdocs/xxxcom/index_by_town.php on
    line 1
    Fatal error: require_once() [function.require]: Failed
    opening required '/Connections/oneandone.php'
    (include_path='.:/usr/local/lib/php5') in
    /homepages/0/dxxxx/htdocs/xxxcom/index_by_town.php on line 1
    My testing server is my remote server.
    Thanks

    ah ha sorted - seems to have something to do with relative
    links. Changing site root relative links to document relative links
    has done the trick.
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=263&threadid=1154447&hi ghlight_key=y&keyword1=virtual%28%29

  • Site Displays Perfectly in DW Preview But Not When Uploaded

    Hi,
    I have a site which displays fine in IE, both the CSS and
    XHTML validate and when I use the FF preview in looks just fine.
    However when I upload the site to the server, the footer and a
    couple of images are missing and I'm just can't figure out why. All
    the paths are correct but I just can't figure out why it displays
    correctly in the preview FF and it's not when uploaded and viewed
    in FF. Site diplays in IE without any problems via preview or
    upload.
    Any help?

    I think you'll need to post a link or some code.
    Regards
    Martin

  • Site works in preview but not when uploaded to the web

    I have been trying to add a link from my website to another project I have been doing, a mini site made with Flash.
    I wanted the link to open up a new window with the animation playing inside, and it works perfectly when I use "preview in safari" within dreamweaver, but now I've uploaded to the web it just opens up a blank window.
    This is the url for the homepage:
    http://kayleighthompson.com/
    and the link is the ActiveAid button at the bottom of the navigation list.
    If anyone knows how to get this working I'd be very grateful! It's for a uni project due in this afternoon :S

    I think you may be having a problem with how Flash is displayed. The Flash on the first page doesn't display in IE8... although it does in Chrome. The second page doesn't display in either. Your link is correct. I checked that.
    Wish I could be more helpful, I'm having the same issue with IE and DW CS4 myself, and can't figure it out.
    This may help: http://code.google.com/p/swfobject/wiki/documentation
    Good luck! Let me know if you figure it out.
    [email protected]

  • Captivate 3 shows skin in preview but not when I run after published?

    Captivate 3 shows skin in preview but not when I run after published.  It shows it is included, what's up?

    Is the Skin externalised?  If so, perhaps Flash Global Security is interfering:
    http://www.infosemantics.com.au/adobe-captivate-troubleshooting/how-to-set-up-flash-global -security
    You could also try NOT externalising the skin.

  • Load swf works in Publish Preview but not when published

    Hi Folks,
    I having a problem where im trying to load two 1mb SWF movies into my Flash piece. It works fine in Publish Preview but not when I finally publish. I get this error in IE:
    SecurityError: Error #2000: No active security context.
    I have googled around and there is some talk online of a hack where by you get a timeout to overcome this. However im not so technical do I dont really know how to do this to my code in AS3. My code at the moment is below.
    Any help would be much appreciated and rewarded with Karma
    movieClip_12.addEventListener(MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_9);
    var fl_Loader_9:Loader;
    //This variable keeps track of whether you want to load or unload the SWF
    var fl_ToLoad_9:Boolean = true;
    function fl_ClickToLoadUnloadSWF_9(event:MouseEvent):void
    if(fl_ToLoad_9)
      fl_Loader_9 = new Loader();
      fl_Loader_9.load(new URLRequest("search.swf"));
      addChild(fl_Loader_9);
    else
      fl_Loader_9.unload();
      removeChild(fl_Loader_9);
      fl_Loader_9 = null;
    // Toggle whether you want to load or unload the SWF
    fl_ToLoad_9 = !fl_ToLoad_9;
    movieClip_14.addEventListener(MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_10);
    var fl_Loader_10:Loader;
    //This variable keeps track of whether you want to load or unload the SWF
    var fl_ToLoad_10:Boolean = true;
    function fl_ClickToLoadUnloadSWF_10(event:MouseEvent):void
    if(fl_ToLoad_10)
      fl_Loader_10 = new Loader();
    fl_Loader_10.load(new URLRequest("refunds.swf"));
      addChild(fl_Loader_10);
    else
      fl_Loader_10.unload();
      removeChild(fl_Loader_10);
      fl_Loader_10 = null;
    // Toggle whether you want to load or unload the SWF
    fl_ToLoad_10 = !fl_ToLoad_10;

    I think this is either a problem with my site preLoader or my external .swf Loader. I was checking out the bandwith profiler and saw something weird and I wondered if anyone could explain...I've added a picture. I have a blank frame on only my actions layer to export classes to and it seems that frame 2 is "bleeding" into frame 1. Could this be my problem? Why would this happen? Thanks

  • Text caption visible on slide but not when running project

    I am using Captivate v4.
    I have one slide of 64 where the text cpation is seen on the slide and runs correctly when using F3 - but when I run the project / F10 the text caption does not appear.
    I have copied the slide with this error onto a blank project as i assumed the project might be corrupt - but the same happens on the blank project.
    Help please...anyone ?
    Noel

    Thanks Rod and Rick,
    Not sure what was the cause of the problem - but have fixed it now.
    After trying many things, including copying the project onto a new blank Captivate project - none of which worked, I did the following and the problem was fixed.
    Working on the original project and the slide with the error - I removed the text caption that was not working (for the nth time) and thought I would try one more time to put the text caption back using a different font.....
    When I opened the text caption option I noticed there are "two" options for the transparent text caption one above the line and one below, see below;
    I selected the transparent option below the line...and it worked OK.
    Have to assume that the ones above the line are the most recently used, and I must have been using this one without noticing which one I was selecting - and there was something wrong with the one above the line.
    Staring to think I need to upgrade to v5.5 - but not convinced it is the right thing to do.
    Thanks again guys,
    Noel

  • Captivate 7 - Created a text-to-speech which I can hear in preview but not when I publish?!

    My question says it all. The text-to-screen audio is not showing up in the first slide, but i can hear the rest of them only the first one is missing. What to do?!
    Thank you

    It's not a good idea to place an audio clip  right on the very first slide. 
    You can try moving the audio clip back from the start of the slide by a second or so.  Perhaps it's missing the initialization of the clip because you're trying to play a clip when it hasn't fully loaded as yet.
    I usually have a very short blank slide of a second or so as my initial slide, with a button on it that the user has to press to kick off the presentation.  I have some text on this slide warning the user that the presentation has audio and advising them to put on headphones so as not to disturb co-workers.  When they click the button it jumps them to the first content slide.  This short delay strategy usually eliminates any issues with audio not playing as expected.

  • PayPal button action works in preview but not when published

    Hi! 
    Any thoughts as to why this works correctly in CS5 publish preview but when I publish it I either get no action or (XP comupter) or a blank page (vista).  Any thoughts or insight would be appreciated.  Also, I'm new to flash and here's the button action:
    on (release) {
            //create the LoadVars that will hold our paypal information
            var paypal = new LoadVars();
            //specify the business, amount of the item, shipping, etc.
            paypal.cmd="_xclick";
            paypal.upload="1";
            paypal.business="[email protected]";
            paypal.currency_code="USD";
            paypal.amount="275.00";
            //paypal.handling = "0";
            //paypal.no_shipping = "0";
            paypal.item_name="One Session";
            //added
            //paypal.lc="GB";
            paypal.bn="PP-BuyNowBF";
            //paypal.no_note="1";
            //send our information to PayPal, including all the optional  variables we have collected from customer
             paypal.send("https://www.paypal.com/cgi-bin/webscr","_blank","POST");
    Thanks!
    Robert

    Hi Robert,
    as far as I understand your post, you are missing some kind of "button-artwork" in the published file, but do not report a problem with the "action" that the script should perform.
    My guess would be that it will be hard to help you without having a better understanding what your trying to achive and how (are you using a prebuilt component, or did you build the button fron scratch etc....)
    It might be even necessary to have a look at the fla itself.
    M

  • Flash video works onDreamweaver preview but not after uploaded to site

    Hi,
    I created a page with FW CS3 and opened it with Dream weaver.
    Using Flash CS3 I created some video clips. I then inserted three
    video files to the web page. In DW preview mode I can see the
    videos. I copy the source code and pasted it to the index page of
    my website as well as uploaded all the sit files from my hard drive
    folder to the website. The page comes up but not the videos.

    Search this forum for "FLASH" "UPLOAD". You'll find hundreds
    of answers.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "SERocks" <[email protected]> wrote in
    message
    news:g11qep$n8m$[email protected]..
    > Hi,
    > I created a page with FW CS3 and opened it with Dream
    weaver. Using Flash
    > CS3
    > I created some video clips. I then inserted three video
    files to the web
    > page.
    > In DW preview mode I can see the videos. I copy the
    source code and
    > pasted it
    > to the index page of my website as well as uploaded all
    the sit files
    > from my
    > hard drive folder to the website. The page comes up but
    not the videos.
    >

  • Cfmail  - works locally but not when uploaded

    Hi,
    I'm using cfmail with form variables for the email addreses.
    It's so users can send email to political candidates. Here's the
    code:
    <cfoutput>#Form.semails#</cfoutput>,<cfoutput>#Form.hemails#</cfoutput></p>
    <cfmail to="#Form.semails#,#Form.hemails#"
    replyto="#Form.useremail#" failto="[email protected]"
    from="#Form.useremail#" subject="Keep Maine Toxin-Free!"
    server="mail.nosuch.com" port="26" timeout="40"
    username="[email protected]" password="nosuch">
    #Form.usermessage#
    </cfmail>
    The form submit page collects those variables and passes them
    as form variables - GET. The "to" field in cfmail is populated by
    hidden fields that contain session variables... they're forwarded
    on as those .semails and .hemails form variables. Actual values
    have been replaced with "none" or "nosuch" for security, but you
    can see the structure anyway.
    This works when run locally, sends the emails as it should.
    When uploaded exactly as is to godaddy's server, it doesn't send
    emails. Doesn't throw any errors, the form results page displays as
    it should... but the emails just never get sent.
    I'd really appreciate any ideas...
    Joe

    Adam Cameron wrote:
    > I don't know how these shared hosting outfits work, and
    what access you
    > have to what, but here's some questions:
    >
    > - have you inspected the mail logs to see if they cast
    any light on the
    > scene
    > - have you configured CF to tell it where the SMTP
    server is?
    > - do you need to authenticate to it, and that sort of
    thing?
    > - are the email messages failing @ the CF end (in which
    case they'll be in
    > the mail/undeliverable dir (not entirely sure that's the
    name of it, but
    > have a shufti around in the cfusion dir...), or are they
    getting to the
    > SMTP server and failing there (check the SMTP server's
    logs).
    >
    Unfortunately all that can't be done by us users of these
    shared hosting
    outfits. You'll need to contact GoDaddy support and ask them
    to take
    these steps. I'm sorry about your probably experience with
    this.
    While I use GoDaddy for my personal hosting where I care more
    about not
    spending a great deal of money over high performance. I do
    not wish my
    support experiences on anybody. If you know ColdFusion well
    and can
    tell support what needs to be done, they should be able to do
    it. Or,
    more likely, you would be able to figure out the self help
    tools to do
    it yourself. But, unless this has changed since my last
    experience,
    their support staff is not ColdFusion literate and are unable
    to guide
    other, inexperienced ColdFusion users.
    Saying all that. Email works just fine on my GoDaddy website
    and I do
    not believe I had to do anything special to use it.

  • Works in preview but not when published in captivate 8?

    My youtube widget used in captivate 8 works just fine in the preview, but when published there's nothing where the video should be, any idea as to why?

    Hi Robert,
    as far as I understand your post, you are missing some kind of "button-artwork" in the published file, but do not report a problem with the "action" that the script should perform.
    My guess would be that it will be hard to help you without having a better understanding what your trying to achive and how (are you using a prebuilt component, or did you build the button fron scratch etc....)
    It might be even necessary to have a look at the fla itself.
    M

  • Video plays in swfiles but not when uploaded to website

    Hi, does anyone have any idea why videos embedded in a swf
    file play okay in the swf file or when tested as a movie on the CS3
    stage, but when uploaded to my website will not play? I am
    completely baffled by this.
    My website link is at
    http://www.marykingmedia.com/marykingmediafive/index.html
    On the Bolivia and Chile page the videos do not appear once
    the video is uploaded to my website. I have no idea why this should
    be when the actual videos play perfectly well within the swf file
    itself. I have put the encoded flash videos inside the same folder
    as the swf file and uploaded everything, but no joy.
    The swf file is 2.97 MB; not sure if that would present any
    problem or not once uploaded
    My video on another project plays fine at
    http://www.marykingmedia.com/marykingmediafour/index.html
    Can anyone cast any light on what the problem is with my
    South America project?
    Thanking you all..

    Hi xchanin, thanks for your feedback. I dont quite understand
    what you mean by this part here ... but if you do that process a
    couple of times (with the same .mov file) you get the same .flv but
    the name of your video is incremented by one each time?
    Pretty well much I followed this tutorial
    http://multimedia.journalism.berkeley.edu/tutorials/flash/building-flash-templates/adding- video/
    I put a FLVPlayback component on my Flash stage.
    I encoded my videos in the CS3 video encoder and followed the
    settings given in the above tutorial link. I did not resize or crop
    the videos, I set the quality to medium and I gave my videos a name
    prior to encoding it.
    After encoding the film, I highlighted the FLVPlayback
    Component and in the parameters found the content path and then
    linked that to my encoded videos one by one. Then I saved my
    worked, played it in the movie tester and then I exported my swf
    file to my Dreamweaver folder, but I did rename my exported file
    (it is not the same name as my Fla file). Could that make a
    difference? I also put my Flv videos in the same folder as my swf
    file and uploaded them to my server. I put the swf file on my html
    page and then uploaded that to my server. My website shows the swf
    file but the videos do not appear at all. However, the videos do
    appear in the actual swf file when I play that.
    I would be grateful to know if you see anything wrong with my
    working process here. Could the renaming of the exported file have
    caused the problem?
    Thanking you.

  • Menu audio will play during preview but not when disc is burned.

    Encore CS6.
    Menu music plays fine in preview. I know that the file is good. No menu audio after disc is burned. Have tried several different transcoding options. There is menu video too that is working fine.

    Here are notes I couldn't find before I posted that; just general re testing methods:
    Mounting an iso (or building to a folder) is a great way to test.  There are some differences, but it is a great method prior to burning to a disk.  The main difference is simply computer vs dvd player - autoactivate on a button doesn't work with a mouseover, and you can be fooled into thinking your navigation does, or does not, work.  (Even on the computer, don't use the mouse for testing, use the "remote" in the player controls.)
    Encore preview is an emulator, like computer DVD players, that attempts to predict what will happen when a disk is played on a set top DVD player. It has always had issues with some predictions not being accurate. Some inaccuracies are like this one: Encore preview does not work, and a burned disk will. Others are the opposite; it works in Encore preview, and not in a DVD player. The point to be made here is that you cannot rely on Encore preview. You also cannot rely on computer playback of a built image or folder. And, in the end, you cannot rely on playback on one DVD player - some disks work on some players and not on others.

  • Chinese characters appear OK in preview but not when printed

    I am working on sap script .
    In which I am facing problem in printing Chinese character.
    In the spool(print preview) I am able to see Chinese characters printed but while printing on a paper it is appearing as '#' Characters.
    I am using Font Family as COURIER in basic settings and If I try changing Font to CHSONG(Chinese character font), alignment getting distorted.
    I have tried several options available in SDN, but not able to find exact solution on the issue.
    Please help me with proper solution.

    HI friend,
    Try changing the device type which suits the Chinese font. There are many device types which support device types.
    Example : CNSAPWIN.
    Just try this friend. If you face queries please revert back to me i will help you.
    Thanks,
    Sri Hari

Maybe you are looking for