Text was truncated

Hello,
I trying to import data from Oracle to SQL Server , and I have an issue with decimal places.
In Oracle I have a number with 36 decimal places, when I trying to bring it to SQL(load to the table) , SQL thinks that it's a nvarchar(38) and still have an error:
Text was truncated or one or more characters had no match in the target code page.
Number looks like that:
73.865092402464065708418891170431211499
Please advise , what I should do in SSIS so it going to work
Thanks

With the . the number of chars is 39 not 38 so it breaks.
You have to make it longer the NVARCHAR, but ideally why not it could be numeric
Arthur
MyBlog
Twitter

Similar Messages

SSIS Error Text was truncated or one or more characters had no match in the target code page

I the same issue or something close.
Except I have one Field (27) that get a trunacation error
Error:
Data conversion failed. The data conversion for column "Column 27" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
The "output column "Column 27" (91)" failed because truncation occurred, and the truncation row disposition on "output column "Column 27" (91)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
Data looks like:Red Text is the field that is throwing the error!
00000412,
0000000011411001,
0273508793,
01,
"RUTH           ",
"EDWARDS             ",
19500415,20080401,
"N",
04488013,
"1",
"F",
365094,
20080401,
000472162716,
"1447203880    ",
43995202341210,
00120.000,
0010,
00008.26,
00004.96,
000.00,
00002.70,
00007.66,
0,
"PROMETH/COD SYP 6.25-10 ",
"Y",
"Promethazine w/ Codeine Syrup 6.25-10 MG/5ML               ",
0000,
"001C",
610020,"WELLP1537",
"O",
"N",
00,
"D",
"S",
"G",
"ID01V012008782",
"TOM AHL CHRYSLER              ",
"M",
"M",
"PBD $20/10+40%/20%            ",
00008.26,
"1184641367"

I have found four things that I always check when I run into this problem. I have yet to find a time when one of these didn't work (specifically helps when reading data from flat files but I suppose most of the four would apply to any source). Check out my blog post, content repeated below:
1. Make sure to properly configure the "Flat File Source". When setting the connection properties to the flat file, take time to click on the advanced tab and ensure that the" Name", "DataType", and "OutputColumnWidth" properties are set properly. I have found that if this is setup correctly when the initial connection is created, some if not all of the data type issues and errors can be alleviated. The "Flat File Connection Manager Editor" can be accessed while initially creating the connection or by double clicking on a flat file connection within the "Connection Managers" for connections that have previously been created.
2. Depending on the order and steps that were used to create the connection to the flat file, sometimes the data types need to be updated in an additional area. This can be found by right clicking on the "Flat File Source" and selecting "Show Advanced Editor...". Once in the advanced editor, click on the "Input and Output Properties" tab. Expand the "External Columns" folder. For each field being loaded from the flat file there are some configurable properties. Make sure that the "DataType" field is properly set for each field.
3. Something else that can be done if you are sure that the data type is set correctly in both of the two previously mentioned locations is to set the "Flat File Source" to essentially ignore those annoying truncation errors. On the same "Input and Output Properties" tab, expand the "Output Columns" folder. For those fields listed, there is a "TruncationRowDisposition" property. By default this is set to "RD_FailComponent". This can be switched to "RD_IgnoreFailure" in order to allow the data to successfully pass through the "Flat File Source" even if SSIS believes that truncation is going to occur. Along with making this change, you can also check the "DataType" in the "Output Columns" as well.
Caution: If you do set the "Flat File Source" to "RD_IgnoreFailure" as mentioned above, always take time to review the data loaded in the target table to ensure that the integrity of the data was not jeopardized.
Note: I have found that when the "DataType" for both the "External Columns" and "Output Columns" is manually updated that it does not remain the same when the advanced editor is reopened. For this reason, try Steps 1 and 2 before setting the "Output Columns" manually.
4. The last thing to try, and this applies specifically to loading data from Excel files as opposed to text or CSV is to set the package to run in 32-bit mode. Click on "Project" on the top menu and select "Data Imports Properties...". Click on "Debugging" under the "Configuration Properties" and set the "Run64BitRuntime" to "False".
Working with data from flat files can sometimes be difficult in SSIS. By using one or many of the approaches I have listed above you should be able to create a repeatable process that is frequently needed within most SSIS packages. Be very careful when setting data types within SSIS and make sure to do it upfront when necessary because it can be harder to debug later in the development process. If the proper changes are made it should not be a surprise to feel a big SSIS developer sense of relief when the screen shows all green.
Let me know if this works!
Check out my blog!

SSIS - "Text was truncated or one or more characters had no match in the target code page"

Hello everyone,
SQL server 2012, SSIS package, we are getting the following error for some of the mapped columns,
"Text was truncated or one or more characters had no match in the target code page."
We're fetching the data from CSV file and dumping that to staging table i.e. SQL server 2012.
Can anybody please advise how to resolve this error/problem? It's urgent.
Any help would be much appreciated.
Thanks, <b>Ankit Shah</b> <hr> Inkey Solutions, India. <hr> Microsoft Certified Business Management Solutions Professionals <hr> http://ankit.inkeysolutions.com

You can enable data viewer (Right click on data flow connector --> Enable Data Viewer) before loading records to find out what's going on. Also, Configure error output to re-direct rows, so you can analyse data type and length.
Also, try this:
Ultimately, in the Advanced Editor of the source datafile, on the Input and Output Properties tab, under External Columns, there is a
Length property that defaults to 50. Changing that to match the Target Database File did the trick. [Source]
Check this links: Add a Data Viewer to a Data Flow
web: www.ronnierahman.com

Inbox: WorkItem text get truncated

Hi,
The work item text of a standard task created by me is of 110 character. The work item text can hold upto 120 characters.
When a workflow was created, the last few characters in the workitem text was truncated.
Is it SAP limitation or is there any way to get the full text.
Note: I used variable to display the doucment number in the work item text.
Thanks
Suresh Kumar

hi Suresh,
based on my experience, the work item text is limited to 50 characters only.
so if text for work item is longer than that it will be truncated
hopes it helps
cheers

Text is truncated on the right side of a text field. How to solve?

Hi group,
I use CR for the .NET Platform 10.2 (VS 2005/.net2.0). In several cases the texts in my crystal reports are truncated on the right side of the text fields (which can show more than one line and which are set in the way that it increases if more than one line is needed).
I created the CRs with CR in VS 2003. Then I migrated the VB.net project from VS 2003 to VS 2005. Then, when I opened a CR in VS 2005 and saved it again I got the message that it will be changed to the newer version if I click "yes" (or perhaps it was the "ok" button). I guess that was the moment the CR was migrated to the newer CR version.
Because of the truncation problem I created one of the CRs completely new with exactly the same settings (i.e. the heigths of the sections, the widths of the text fields, and all the other setting are completely identical to the CR created in VS 2003). Interestingly, the texts are truncated in none of the text fields any more.
Have I done the migration correcty? (Is it really opening the CR and saving it an saying "yes" or should I rather have done it in another way?)
Does somebody of you already have had this kind of problem? How could it be solved without creating all CRs anew?
Does recreating a CR which shows truncation of texts really solve it, or is truncation caused by something else, perhaps a certain property of a CR etc?
The "printer" is set to "no printer" in all CRs. The truncation does show independent of whether the registry entry "HKEY_CURRENT_USER\Software\Crystal Decisions\10.2\Crystal Reports\Export\PDF\ForceLargerFonts" is set to 1 or to 0.
Thanks for help in advance
Kind regards
Michael

>
Ludek Uher wrote:
> There is a fair number of kbases in the kbase search (https://www.sdn.sap.com/irj/sdn/businessobjects-notes). Most of these refer to fixes. It may be a good idea to get the latest SP for your version of CR - CR 10.2?) and see if that helps. The latest SP for CR 10.2 is here:
>
> https://smpdl.sap-ag.de/~sapidp/012002523100006007872008E/crvs05sp1.exe
>
>
> Ludek
Hi Ludek,
I already installed crvs05sp1 a few months ago (still traceable by the dir "C:Program FilesCommon FilesBusiness ObjectsPatchesCrystal Reports for Visual Studio .NET 2005 Service Pack 1" on my computer).
Unfortunately, I cannot find any fitting entry in the kbase. If I search for "text truncation" or "text truncated" i get results but they are about pdf or word or fixed truncation problems in older CR versions.
It seems as if I am the only one who has to face this problem :-).
Best,
Michael

XL Reporter - item code starting with leading zeros was truncated

Hi,
Anybody knows how to prevent XL reporter from truncating the leading zero(s) in the item code?
I had done a XL report where one of the field is to retrieve Item Code. In the report generated, the formula was as below:
=ixDimGet("00100068")
However, when MS Excel display it in the spreedsheet, the item code becomes "100068" where the leading zeros was truncated. The correct item code was supposed to be "00100068". I had tried to change the cell format to "text", "number", "general" and etc, but it doesn't work. Any method to correct the item code display in the Excel spreadsheet?
Thanks,
sianghing

Chan,
There is a simple solution for this. Highlight the cell with the Item Code selection in it.
Click the formula builder icon in Excel to open the formula builder
In the bottom box, type TRUE
This tells Excel that you want to display exactly what comes out of the database, without having to predetermine it with a Custom format, etc.
I think that will solve your issue.
Let me know if this needs further explanation.
Regards,
Brad Windecker
[Orchestra Team|http://www.orchestrateam.com]

Using a Variable in SSIS - Error - "Command text was not set for the command object.".

Hi All,
I am using a OLE DB Source in my dataflow component and want to select SQL Query from the master table I have created variables v_Archivequery
String packageLevel (to store the query).
<Variable Name="V_Archivequery" DataType="String">
     SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
     FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
     ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
     Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)
    </Variable>
I am assigning this query to the v_Archivequery variable, "SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)"
Now in the OLE Db source, I have selected as Sql Command from Variable, and I am getting the variable, v_Archivequery .
But when I am generating the package and when running I am getting bewlo errror
Error at Data Flow Task [OLE DB Source [1]]: An OLE DB error has occurred. Error code: 0x80040E0C.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E0C Description: "Command text was not set for the command object.".
Can Someone guide me whr am going wrong?
Please let me know where am going wrong?
Thanks in advance.
Thankx & regards, Vipin jha MCP

What happens if you hit Preview button in OLE DB Source Editor? Also you can use the same query by selecting SQL Command option and test.
Could you try set the Delay Validation = True at Package and re-run ?
If set the query in variable expression (not in value), then Set Evaluate As Expression = True.
-Vaibhav Chaudhari

The following error text was processed in the system IDS : Access via 'NULL' object reference not possible.

Hi all ,
Im getting the below error , actually recently i created my own custom table zstudent, later i wrote select query to fetch data from the same and dump at internal table and then bind this to the table node.
But im getting below error, even i removed the select query still same error is occuring.
Error when processing your request
What has happened?
The URL http://********00.*****b.com:8000/sap/bc/webdynpro/sap/zdemo_student/ was not called due to an error.
Note
The following error text was processed in the system IDS : Access via 'NULL' object reference not possible.
The error occurred on the application server axsids00_IDS_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: WDDOINIT of program /1BCWDY/YUSM2Q74A826Y0JY1I4V==CP
Method: IF_WDR_COMPONENT_DELEGATE~WD_DO_INIT of program /1BCWDY/YUSM2Q74A826Y0JY1I4V==CP
Method: DO_INIT of program CL_WDR_DELEGATING_COMPONENT===CP
Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
Method: INIT_CONTROLLER of program CL_WDR_COMPONENT==============CP
Method: INIT of program CL_WDR_CONTROLLER=============CP
Method: INIT of program CL_WDR_CLIENT_COMPONENT=======CP
Method: INIT of program CL_WDR_CLIENT_APPLICATION=====CP
Method: IF_WDR_RUNTIME~CREATE of program CL_WDR_MAIN_TASK==============CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP

Thanks Rama,
Acutally i accidentally commented the lo_nd_student = wd_context ....etc
this line was commented .
i have one small requirement to fetch data from local customised table and fill the same to internal table and bind that to table node.
my table node is student having attributes as name , city and number , all are of type strings.
now i created one custom table zstudent having ID - char of length 10,
name of type string
city of type string
num of type string
i have inserted records
but when i use select query to fill data from this zstudent to my internal table of type lt_student type wd_this->elements_student ,
im getting same above error.

Text in 4b5 is somewhat blurry on most sites; text was clear in 4b4 and earlier. How can I fix this?

http://imgur.com/av4aa.png
On the left is FF 4b5, with slightly blurry text on Lifehacker. On the right is Chrome 6.0.472.59 beta, without the blurry text.
I should note that the blurry text was not an issue in FF 4b4 or earlier.
I have also upgraded just now to 4b6, and the same issue is present.

This is caused by hardware acceleration. You can resort to the previous font rendering by turning off hardware acceleration. To do that open the options dialog (Click on the Firefox button, then select Options...), go to the Advanced panel then select the General tab, then de-select the setting to use hardware acceleration.

SQL*Loader and "Variable length field was truncated"

Hi,
I'm experiencing this problem using SQL*Loader: Release 8.1.7.0.0
Here is my control file (it's actually split into separate control and data files, but the result is the same)
LOAD DATA
INFILE *
APPEND INTO TABLE test
FIELDS TERMINATED BY ','
OPTIONALLY ENCLOSED BY '"'
first_id,
second_id,
third_id,
language_code,
display_text VARCHAR(2000)
begindata
2,1,1,"eng","Type of Investment Account"
The TEST table is defined as:
Name Null? Type
FIRST_ID NOT NULL NUMBER(4)
SECOND_ID NOT NULL NUMBER(4)
THIRD_ID NOT NULL NUMBER(4)
LANGUAGE_CODE NOT NULL CHAR(3)
DISPLAY_TEXT VARCHAR2(2000)
QUESTION_BLOB BLOB
The log file displays:
Record 1: Warning on table "USER"."TEST", column DISPLAY_TEXT
Variable length field was truncated.
And the results of the insert are:
FIRST_ID SECOND_ID THIRD_ID LANGUAGE_CODE DISPLAY_TEXT
2 1 1 eng ype of Investment Account"
The language_code field is imported correctly, but display_text keeps the closing delimiter, and loses the first character of the string. In other words, it is interpreting the enclosing double quote and/or the delimiter, and truncating the first two characters.
I've also tried the following:
LOAD DATA
INFILE *
APPEND INTO TABLE test
FIELDS TERMINATED BY '|'
first_id,
second_id,
third_id,
language_code,
display_text VARCHAR(2000)
begindata
2|1|1|eng|Type of Investment Account
In this case, display_text is imported as:
pe of Investment Account
In the log file, I get this table which seems odd as well - why is the display_text column shown as having length 2002 when I explicitly set it to 2000?
Column Name Position Len Term Encl Datatype
FIRST_ID FIRST * | O(") CHARACTER
SECOND_ID NEXT * | O(") CHARACTER
THIRD_ID NEXT * | O(") CHARACTER
LANGUAGE_CODE NEXT 3 | O(") CHARACTER
DISPLAY_TEXT NEXT 2002 VARCHAR
Am I missing something totally obvious in my control and data files? I've played with various combinations of delimiters (commas vs '|'), trailing nullcols, optional enclosed etc.
Any help would be greatly appreciated!

Use CHAR instead aof VARCHAR
LOAD DATA
INFILE *
APPEND INTO TABLE test
FIELDS TERMINATED BY ','
OPTIONALLY ENCLOSED BY '"'
first_id,
second_id,
third_id,
language_code,
display_text CHAR(2000)
)From the docu:
A VARCHAR field is a length-value datatype.
It consists of a binary length subfield followed by a character string of the specified length.
http://download-west.oracle.com/docs/cd/A87860_01/doc/server.817/a76955/ch05.htm#20324

TitledBorder Text is Truncated

Hello all,
This must be a common problem.
Here's a simple version of the problem: I have a JPanel using a FlowLayout. Within the JPanel I have a JLabel whose text is a single character in length. When I place a TitledBorder around the JPanel, the border's text is truncated because the FlowLayout layout manager does not consider the border text when it gets the size of the JPanel. Please see the sample code below.
Is there a way to make sure the border's title is taken into account by the layout manager?
Yes, I know I can get the size of the border's text, convert it to pixels, override the panel's getPreferredSize() method, etc. but that's so ugly.
import java.awt.*;
import javax.swing.*;
public class Tester2 {
public static void main(String[] args) {
      JFrame f = new JFrame();
      f.getContentPane().setLayout(new FlowLayout());
      JPanel panel = new JPanel();
      panel.setBackground(Color.pink);
      panel.add(new JLabel("X"));
      panel.setBorder(BorderFactory.createTitledBorder("Long TitledBorder Text"));
      f.getContentPane().add(panel);
      f.pack();
      f.setVisible(true);
}

I think I know the answer to my own question....
First, let me say I think this is a Swing bug (perhaps a FlowLayout bug) because the preferred size of the panel does take into account the border's height when using a TitledBorder but not the width. The preferred size of a component should take into account both the height and width of a border (if one is in use). If you run the sample program you'll see the preferred height certainly does take the border's height into account but not the width.
Second, there is a method in javax.swing.border.TitledBorder:
getMinimumSize(Component c)
This method allows a workaround for the truncation of the border's text. I simple set the panel's preferred width to that returned by getMinimumSize() and I'm good to go.
I'm not 100% sure about all this, I'll investigate more tomorrow and post a bug w/Sun if warranted.
Any comments or suggestions are still very welcome, of course.
Hello all,
This must be a common problem.
Here's a simple version of the problem: I have a
JPanel using a FlowLayout. Within the JPanel I have a
JLabel whose text is a single character in length.
When I place a TitledBorder around the JPanel, the
border's text is truncated because the FlowLayout
layout manager does not consider the border text when
it gets the size of the JPanel. Please see the sample
code below.
Is there a way to make sure the border's title is
taken into account by the layout manager?
Yes, I know I can get the size of the border's text,
convert it to pixels, override the panel's
getPreferredSize() method, etc. but that's so ugly.
import java.awt.*;
import javax.swing.*;
public class Tester2 {
public static void main(String[] args) {
JFrame f = new JFrame();
f.getContentPane().setLayout(new FlowLayout());
JPanel panel = new JPanel();
panel.setBackground(Color.pink);
panel.add(new JLabel("X"));
panel.setBorder(BorderFactory.createTitledBorder("Long
TitledBorder Text"));
f.getContentPane().add(panel);
f.pack();
f.setVisible(true);

Help Needed: Facing the error ORA-01406: fetched column value was truncated

Hi Everyone,
When I run a particular PL/SQL query using Oracle 9i ODBC driver, it is working fine and fetching me the desired results.
However, when I run the same query using the Oracle 10g ODBC driver, I am getting the error: ORA-01406: fetched column value was truncated.
I have checked all the fields of the table and they are well within the allowable limit.
Can you please let us know what needs to be done to resolve this issue?
Thanks and Regards,
Sudhindra

Well it's obviously a problem with the client software. Doesn't Datastage have some way of configuring these things?
rgds, APC

I have a scanned doc that I copied onto a word doc. the scanned document text was crooked. I want to straighten the text. How do I do that

I have a scanned doc that I copied onto a word doc. the scanned document text was crooked. I want to straighten the text. How do I do that

If it is an image you could simply click on the image in word and then use the green dot that appears above the image to simply drag and rotate the image around. Alternatively, import it into iPhoto and use the rotation capabilities in that, click edit and then quick fixes and rotate. (Then export back into word).

Long Text getting truncated in IW32

We are using BAPI_ALM_ORDER_MAINTAIN to createa orders with long text.
When reviewing the long text in the Office integration screen, We can see that all text is there.
If, a user modifies the long text in the long text window of IW32, any text that does not display is lost when the order is saved
If a user modifies teh long text in the office integartion screen, no text is lost.
Any help on the cause and how to prevent this would be appreciated.
Scott

hi ,
thanx for the reply,
text gets truncated in print preview itself.
i put breakpoint in se38 and in sapscript.
in se38 the variable shows full text, but in sapscript, it gets truncated.
coding in sapscript
/:           POSITION WINDOW
/:           POSITION XORIGIN '-0.5' CH YORIGIN '-0.10' LN
/:           SIZE WIDTH '+0.3' CH HEIGHT +0.85 LN
/:           BOX HEIGHT '9.0' LN FRAME 10 TW
/:           PERFORM PO_TEXT_DISP IN PROGRAM ZTEST_DRIVER
/:           USING &EKKO-EBELN&
/:           CHANGING &PO_TEXT&
/:           ENDPERFORM
/:           IF &PO_TEXT& NE ''
S7           &PO_TEXT&
/:           ELSE
/:           ENDIF
regards
senthil

Detect if text was clipped

Hi!
When we set lineBreak to explicit in a multiline label, is there any way to check if the text was clipped or extends past the right edge?
Thanks

Spark label.
Where can I find the function that breaks the string in multiple text blocks? Is there any var that has info how the text was breaked: which text is in every line?
Thanks.
Message was edited by: luisborlido

Text was truncated

Similar Messages

Maybe you are looking for