Text window that will scroll

How do you get a text box that you can scroll down inside a
table .......I
have more info than space to put it in so i need to be able
to scroll down
to read it.
Thanks
Mike

Thanks for the info........but if i use the exbandable option
will it make
the table bigger....thats just what i dont want to
happen.....I want it to
just scroll in the space thats there .......hope I am
explaining it ok
Thanks again
Mike .
"Murray *ACE*" <[email protected]> wrote
in message
news:ep3a6t$i70$[email protected]..
> MUCH more user friendly.
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.dreamweavermx-templates.com
- Template Triage!
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
> ==================
>
>
> "bregent" <[email protected]> wrote in
message
> news:ep3a22$hu4$[email protected]..
>> >How do you get a text box that you can scroll
down inside a table
>> >.......
>>
>> You can use either an iframe or scollable div.
>>
>> >I have more info than space to put it in so i
need to be able to scroll
>> >down
>> to read it.
>>
>> A better solution is to just allow the table cell to
expand for the
>> contents
>> rather than constraining it in a scrollable
container. Much more user
>> friendly.
>>
>
>

Similar Messages

  • Creating text that will scroll in a text frame

    I have tried to create text that will scroll in a text frame by following this:
    Create your text frame including any inline buttons or hyperlinks. Make note of its width and then draw the frame you wish to hold that content. Make it about 5-7 pixels wider than the text frame and align the two, top and left. Cut the text frame to the clipboard and choose the placeholder frame. Choose edit>past into.
    With that frame select, from the overlay creator panel choose pan and zoom and check the pan only option.
    When I get to the overlay creator panel and choose pan and zoom, it asks me to select a cropped image.  I'm not sure what I'm doing wrong.  Any help would be appreciated.
    Also, I am not creating any of the content on the pasteboard.
    Please help. thanks

    is the parenting frame cropping the inline text frame?
    —Johannes

  • IPhoto is has a text window that opens that says "BASH"

    When I attempt to open up my iPhoto is has a text window that opens and says "Last login: Thu Feb 26 20:59:01 on ttys000 Brents-MacBook-Air:iPhoto Library.photolibrary brentthomas$"....I am a little nervous to where my photos are at. Anyone know whats going on? Trying to backup my iphone 6 to my macbook air.

    "Last login: Thu Feb 26 20:59:01 on ttys000 Brents-MacBook-Air:iPhoto Library.photolibrary brentthomas$"...
    Try the following:
    Select your iPhoto Library in the Finder. By default it should be in your Pictures folder.
    Use the command "File >Get Info" or press the key combination ⌘I
    In the Info panel, that will pop up click the disclosure triangle for "Open with" and set this to "iPhoto.app".
    Click the "Change All...." button as well.
    This will change the document type of your library to be opened by iPhoto.

  • There is a 3 inch section of the window that will not recognize the mouse. It will not let you click on the icons or screen in any way in this section under the address bar. It is only in firefox where this is a problem

    There is a 3 inch section of the window that will not respond or recognize the mouse. It will not let you click on the icons or screen in any way. This is the only program we are experiencing this problem with.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Is there something comparable to My Documents in Windows that will allow pdf files in Quickoffice to appear?

    I have an iPad 2. I need to send pdf files from Quickoffice to my school's copy center for duplication to distribute to my students. When I click on choose files at the SUNY's copy center, I am only able to access Camera Roll and Photo Stream. Is there something comparable to My Documents in Windows that will allow pdf files in Quickoffice to appear?

    Perhaps I am not clearly stating my problem. I always used my desktop or laptop to send files that were handouts to the copy center since I do not use a textbook for one English class. Both crashed within a two-day span so until I can get one fixed, I am hoping to use the iPad. I have all my files saved as PDF files in my email. I have added the Quickoffice app and transferred next week files from school email to Quickoffice. When I access SUNY's website to send my files to be copied and click on choose file, all that is there are photos. If there is not a central location in iOS, then how would I manually sync the files in Quickoffice to whatever is allowing the photo files to appear?

  • My iCloud has been 'upgrading' for the last 12 hrs. That is, after I had pressed 'install after downloading the latest, improved version without entering my password. How do I get back to the window that will allow me to enter my password?

    My iPad has been 'upgrading' for the last 12hrs.That is, after I had downloaded the new version of iCloud, and pressed 'Install' without entering my password. It is probably searching for it. How do I go back to the window that will allow me to enter my password. I have tried switching off the device, but each time the 'upgrading' comes on. I have also switched it off and left it on the charger for at least 6 hrs.

    My iPad has been 'upgrading' for the last 12hrs.That is, after I had downloaded the new version of iCloud, and pressed 'Install' without entering my password. It is probably searching for it. How do I go back to the window that will allow me to enter my password. I have tried switching off the device, but each time the 'upgrading' comes on. I have also switched it off and left it on the charger for at least 6 hrs.

  • Create a window that will always ontop

    pls am having a problem creating a window that will always on top such that it cannot be minimized that cannot go to the background ,will always be on top like the task manager in windows
    help meeeeeeee!!!!!!
    my email:[email protected]

    http://forum.java.sun.com/thread.jsp?forum=57&thread=121761
    Try searching the forums, this has been asked many times before.

  • I am trying to use automator to open a safari popup window that will automatically log me into whatever account and I attempted to type up an applescript that utilized the "System Events" function with no avail, any ideas?

    I am trying to use automator to open a safari popup window that will automatically log me into whatever account and I attempted to type up an applescript that utilized the "System Events" function with no avail, any ideas?

    Hi
    In iMovie'11 (version 9.0.x)
    on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
    down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
    Here one can select the Pre-Set speeds
    Are you familiar with getting 'inspector' to run?
    No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
    Yours Bengt W

  • CS5: How to design a text logo that will have different faces of people of different race on it? [was: Help Me Please!!!]

    I am trying to design a text logo that will have different faces of people of different race on it, please how can I develop the text such that the pictures of those faces will be on it?
    Does the picture have to be at the background? Which platform (Photos, Illustrator etc) do I have have to use?
    Someone please help me since I am new with Adobe packages and I use Adobe CS5

    @JJMack
    Thank you for your help
    Please this sound too technical for me
    Can you help me to break this down?
    I have not even design the text of the logo and do not understand what you have text.
    I know what a layer is but I have not yet txt out the Logo text
    As for this: "or layers these can be converted to shape layers and merged if  need be",...  which platform can I do this on please (Photoshop, Adobe Illustrator etc ?
    As for this: "You can then  edit the slape layers path and define a custom logo shape for the edited path",   I need to know the process, will try to see sample on youtube though
    As for this: "Then use the custom shape tool draw out any size logo path you want and use it as a vector mask on image layer".  I will try to get familiar with Vector first and please let me know alternative platform to do this on
    Thanks

  • Will no longer hold charge. Keyboard will not print in text window. Will not place a phone call.

    I received my DX2 in November of 2011, It worked fine until January of 2013. With the occasional lock up texting. However since January it will not place a call regularly. It gets as far as the green phone to complete call and will not go further. Try a reboot and still won't.Have taken most of the added apps out. I have to shut off facebook when through or it now runs my battery out in two hours of non use. The battery will not stay charged more than four hours of standby time. I have kept the weather on all the time past and present. The battery used to last eight to ten hours of regular use, not even close to that now. Is there any thing I can do to it or must I travel to the Verizon Wireless Center a touch over an hour away to get it looked at? Any suggestions?

        Hi there Jer679E!
    Feel free to pull a u-turn because there's no need to travel anywhere for the support we can dish right here. Of course, I'm terribly sorry to learn of the device issues you've been experiencing, but I appreciate you getting in touch to let us know about what's been going on. So, let's fix it!
    Now, I appreciate everything you've done troubleshooting wise since the problems began but let's try a different route. First, you cited this being a bit of a keyboard issue with locking up while text. To fix that, go to settings > applications > manage applications > all > multi-touch keyboard > clear data and force close. Go ahead and test things out. Next, let's talk about not being able to complete a call as well as your battery issues (because we want you staying in touch and not having to worry your phone is about to die). This could very well be in relation to an app you have installed. Try launching your device in safe mode http://vz.to/nXvveN . That will disable third party apps so we can better isolate the issue pending how you phone reacts when in safe mode. Please keep me updated on progress made. Thanks!
    EvanO_VZW
    VZW Support
    Follow us on Twitter @VZWSupport

  • Plain text editor that will open html correctly in browser

    TextEdit isn't the answer. If I save a plain text document full of html code as a "web page (html)" doc, it displays as plain text code in the browser rather than translating the code as a web page. I cannot save it as a .txt doc - the option is not available. If I save it as a .odt, I cannot then append .html to the file. So really, it ***** as a coding app. Isn't there a plain text option for Mac that works just like Notepad (or like SimpleText from years ago)?

    dramaguru wrote:
    If I save a plain text document full of html code as a "web page (html)" doc, it displays as plain text code in the browser rather than translating the code as a web page.
    This is because what you're doing causes it to think that the code is the content of the page.
    You must work in Plain Text mode: when you have completed your code use Save As and save it as filename.html - you will get a dialog box offering to add .txt on the end, but you should decline the offer. This will work perfectly well.
    It's a very useful way of making simple alterations to code: if you want to go for something more advanced you might like to look at PageSpinner ($29.95, trial period available) which gives you colouring dependent on the type of code, pre-formed code to add it, and a live display of the result using Webkit (as in Safari).

  • How do you create instruction text in a text field that will disappear upon typing in the field?

    I have a form containing a text field.  Can I place instruction text in a text field so that after the end user can see the grayed out instructions?
    What I would like is when he clicks in the field to type text, the instruction text goes away; it is no longer seen or printed.
    Right now I have a tool tip; however I believe the instruction text would be of more value to the end user.
    Does anyone have any ideas on how I can do this?
    Can it be done?
    Thanks,
    Diane

    Hi Diane,
    You can do this by setting a null pattern for the textfield (see the Patterns dialog in the Object > Field palette). There is an example here, have a look at the objects to the right on page 2: http://www.assuredynamics.com/?portfolio=laying-out-form-objects.
    There is script that changes the font style depending on the value of the field.
    There is another example here: http://www.assuredynamics.com/?portfolio=scripting-a-null-display-pattern-for-a-dropdown
    Hope that helps,
    Niall

  • Can I create a link in a text cell that will open another file?

    I am creating a template in Numbers that I can use to log meeting session data, such as length, date, notes of the meeting content, action items and then also have a field (cell) for links to outside documents relevant to the meeting or client.  I see how I can create a link to a webpage or an email, but not to another file on my hard drive, so that when I am in the file and reviewing notes, I can just click to open the items being referred to.
    Does that make sense?
    Thanks,
    Cliff

    Well, if you specifically know the name of the application in question and how it accepts parameters, you can try using Runtime.exec()
    If you're willing to sacrifice platform independence (which it sounds like you are, since you specifically mentioned Explorer), you can try using the NTVDM "call" command, which taps into the file associations in the registry and launches the appropriate application.
    I guess it would depend on the exact functionality you want. :)

  • Why the Error Window that Will Not Leave?

    I keep getting an error window, usually it occurs whenever I turn on my printer, & sometimes when I turn it off. This window, despite having an "OK" button, never leaves the screen, necessitating my having to move it around, as it gets in the way. It will only leave when I reboot my computer.
    The ironic thing is, there is NOTHING WRONG with my printer, the connection, or the function of my printer! The only thing wrong is this rather LARGE, and uninvited error window!
    The exact wording is:
    Failed to connect to the device
    -Check the I/F cable connection between the device & your computer.
    -Please turn OFF the device once, and then turn ON the device
    Then try again.
    (MTW005)
    and then there's an "OK" button
    On the top left is the image of a camera within a shadowy image of what looks like a piece from a jig-saw puzzle...

    BDAqua wrote:
    Is this a Brother Printer?
    Look for a "TwainBridge" driver in Activity Monitor, then kill it/force quit it.
    Maybe try reinstalling it...
    http://www.brother.com/E-ftp/macosxdownloadscn.htm
    THANKS.....

  • Is there a known problem with the latest Shockwave player for Windows that will reboot a user without notification"

    This problem is not with the actual Shockwave Application but the patch. Thanks!

    This behavior was first observed with the 12.1.6.156 patch. The command line used to install the patch is: sw_lic_full_installer.exe /S. The /S switch installs the patch silently.  However, in some cases, computers reboot without prompting the user

Maybe you are looking for