Text won't display

my text won't display properly (size and position) in premeire elements 7

dannyellis1
What computer operating system are you running the Premiere Elements 7 program?
Is this a "it worked before but not now" type of issue or "it never worked before"?
Where is the text not displaying correctly...in the opened Titler, in the disc menu window in the Create Menus section of the program, other, or everywhere?
Is your video card driver up to date according to the web site of the manufacturer of the video card?
You mention size and position. What about font type?
Also, please include:
a. computer resources description
b. properties of your source media
c. project preset
d. description of Timeline content and duration
Let us start here and then decide what next.
Thanks.
ATR

Similar Messages

Dynamic text won't display

I don't know if this is a bug. I have a movie that contains a
dynamic text. When I run it, the text displays fine. But when the
said movie is run through another movie clip (using loadMovie), the
dynamic text won't display. Any ideas why? Thank you.

dongzky wrote:
> Actually, there was no code involved. The dynamic text,
with borders around it,
> I tried to put a value for testing. It works fine when
run. But when called
> by another movie clip, although the movie with the
dynamic text still loads,
> the text won't display anymore. Even the borders were
gone.
Than again, it's a bug on your end :)
Dynamic text is a text container, it's to be use with
dynamically given data, from
source file or variable string on timeline. It's not meant to
be for regular text
display. You need to use Static text. The fact that you can
see it it's just flash
being tolerant but it only lasts for as long as the movie is
getting more complex.
You can get away with somethings even tho you should not be
using them, does not
mean they will work all the way. Dynamic text, as said above
is for text that comes
to flash from outside source and this is when it works best.
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Japanese text won't display in SWF

Hi. I have a Flash file that reads text from an XML document
and displays it in dynamic text boxes. Some of these boxes are
animated and/or rotated, so I have embedded the fonts. Everything
works great with English characters, but I need it to work on
International systems also. When the XML file contains any Japanese
characters (or any 2-byte characters), little squares appear in the
text boxes instead of the correct characters.
I can make it work if I use _sans as the font for the dynamic
text, but this can't be embedded so the text disappears if it is
rotated. I have also gotten it to work with the font Arial MS
Unicode, but this bloats the SWF from ~400k to ~7mb!
Does anyone know of any other fonts that support the high
ascii/2-byte characters? Or is there anything else I can try?
Thanks!!

malachite00 wrote:
> Thanks David. So is there any way around having to embed
the font when
> rotating text?
Not that I know of. Your problem is that you're loading the
content
dynamically, so you have no idea what it will contain.
There's normally
no need to embed Japanese fonts for a Japanese audience,
because they
already have the main fonts, such as Mincho, Gothic, or Osaka
on their
machine. Perhaps you'll just have to give up the idea of
rotation.
David Powers
Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
http://foundationphp.com/

Flash text won't display from web

I cannot for the life of me get my "flash text" to work in
Dreamweaver. It shows up just fine in the "preview in browser"
mode, but once I put on the web, it fails to show up in any
computer I have tried--including the one I made it in where the
preview worked.
Any ideas

Post a link to the page, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"NIRC" <[email protected]> wrote in message
news:emr5e5$9eb$[email protected]..
>I cannot for the life of me get my "flash text" to work
in Dreamweaver. It
> shows up just fine in the "preview in browser" mode, but
once I put on the
> web,
> it fails to show up in any computer I have
tried--including the one I made
> it
> in where the preview worked.
> Any ideas
>

When I go to site, text won't display

Put up a new site, http://ghialternate.businesscatalyst.com/. When the site loads, it is just the graphics. If I mouse over some of the areas text will appear, but some never shows unless I refresh the page.
Any help would be appreciated.

Are you using Chrome? You have possibly encountered the bug in the most recent version of Chrome with rendering web fonts. Take a look at the following thread for more details - http://forums.adobe.com/message/6157419.
Thanks,
Vinayak

My iPhone 5 won't display smart text options.

My iPhone 5 won't display smart text. It did when I initially downloaded the new OS, now those options don't appear at all. Did I click something to make them disappear?
I went into Settings to see if there was a component of it within Messages. I don't see anything.
Thoughts please.....
Thanks much
Ginger

Awwww......that's it....the dash! I tapped it. Tried to drag it up/down and it didn't move. Now I swiped and it's back!
So I need to remember to drag up/down and now swipe.....
Thanks much!
Ginger

Layered text and graphic in Word won't display when converted to PDF

I have several simple shapes with text layered in front in my Word document. After they are converted to PDF using Acrobat XI, only the shape will display. I can tell the text is still there, because I can use my cursor tool to select it, but it won't display visually. It looks like it isn't there but it really is. One bit of text is even an internal link, and the link still works but I can't see the text I'm clicking on.
If anyone has any suggestions I'd appreciate it.
Thank you,

Hi Lori - this was perfect! It was an issue with the layers being misordered. I used the Edit Text & Images tool listed under Tools > Content Editing, found the layers, then by right-clicking I was able to bring the text to the front and it all looks great now.
I would like to know why this happened, or if not why, how I could make sure it doesn't happen again. If there's a check box or other setting I could use to remove this problem that would be fantastic.
Thank you so much for pointing me in the right direction!
-Scott

Uprgrad to ios7 calender won't display text entered. the appointment entered is there becauwse it alerts me to appointments entered

Calender won't display text entered for appointments.
The appointments are there as the phone alerts me as requested. Also the appointments are synced with icloud and Outlook on my computer.
Any appointments entered in computer do not show on phone but are there.

I've managed to fix this!
In case it's helpful to anyone encountering this problem, here's what I did.
I went into the preferences (through the Calendar app, not the System Preferences - didn't want to remove the entire account info, in case I encountered problems getting my email to link again), clicked on the Account tab and removed the Exchange account (by clicking the "-" (minus) sign below the listing of accounts). I then added an account (clicking the "+" sign) and re-entered the information. When asked if I wanted to add these settings for Mail and Contacts, I unclicked those options (bc they're already installed and work fine). Once I completed the information, I closed the settings window, and hit ⌘+R to refresh and all the Exchange appointments appeared.

WRT54GS router setup page won't display most text

So I bought a new Linksys WRT54GS v6 wireless router yesterday, and I was able to set it up to share my DSL line, but when I went to the router setup page (192.168.1.1), it wouldn't display most text. It displays text in the entry boxes, but there are no links or other text on the page. I took a screenshot which can be seen here: http://img87.imageshack.us/img87/3390/routersetuppagemc1.jpg
Does anyone know what I can do to solve this issue?

Hey Merugo. I was having the same problem with the router settings screen refusing to load for my WRT54G. Do you happen to have v.5 of the router? After digging around in the help files on the site, I found this for firmware recovery for the WRT54G v.5 and it fixed the problem I was having once it loaded the updated .bin. Blank screen be gone.
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=3176
(The first time the router tried to load the new .bin it timed out. And the second time it installed correctly though it didn't display "Upgrade Success" like it's apparently supposed to.)
Hope this can maybe help you since it fixed things for me.Message Edited by Res on 10-03-200606:44 PM

Image with foreign characters in name won't display

I have an image on my drive whose name has foreign characters ("c�pia de frente.jpg"). To display the image my JSP reads the image name from the database and generates the following html:
<img src="../pictures/c�pia de frente.jpg">The page then displays a broken image icon for this image. Images in the same list which do not have foreign chars get displayed accurately. When I choose "show image.." in my browser I see that the image name has been rewritten into the following: c%C3%B3pia%20de%20frente.jpg. The rewriting that will display the image is instead c%F3pia%20de%20frente.jpg. I found the correct rewriting on another of my JSP where the image with the foreign chars actually gets displayed correctly although the code to generate the html is the same on both pages and looks something like this (simplified):
<logic:iterate id="listelement" name="list" property="rows" scope="request" type="org.apache.commons.beanutils.DynaBean">
<%
out.write("<img src=\"../pictures/"+listelement.get("name").toString()+"\">");
                         %> <br>
                        </logic:iterate> Every image that doesn't have foreign chars in its name gets displayed accurately but images with foreign chars in their names won't display. What am I doing wrong?
Thanks
Niklas

Thanks, but it doesn't seem necessary to replace foreign characters. It works without replacing in one place but not in another which is confusing. I think it is something with the enconding but can't see what the difference is between the working and non-working code. In both pages I have put <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">I'd greatly appreciate any more suggestions to solve this problem.

Yahoo's sign-in seal won't display in Firefox but will in I.E.

My Yahoo sign-in seal worked fine 'til this morning. It'll change the color but won't display the same or new text. Yahoo tech said it's a Firefox problem because it works in Internet Explorer. He dbl-checked that I wasn't on a phishing site.
Any ideas to correct this?
Thx-Kate

Is the seal a Flash object?
Update the Flash plugin to the latest version.
*http://www.adobe.com/software/flash/about/
*http://helpx.adobe.com/flash-player.html

Photoshop CS6 won't display my current font

I'm having issues with fonts in CS6. Some issues I see are
Highlighting text won't tell me what font family I'm actually using
Also to change fonts I have to first highlight the text and then change it to a random font and then choose the font I want.
Am I the only one having font issues?

Usually, if you don't see a font family listed when you have text selected, it's because you have multiple different fonts in use in the selected text. Upon selecting the Type tool, you should already see a font selected, which will be the last font used. If you just place the prompt in the line of text is should display the font of the character immediately to the left, is the font family still blank?
On the second item, with the above info, if you select text that uses mulitple fonts, causing the font family to go blank, it will not be filled with a font again until you select text that uses a single font family. Use the suggestion above about just placing the type prompt next to a single character to display just that one font.
Also, for your workaround, why choose a random font? Why can't you just go straight to the font you want?

SWF Won't Display in RoboHelp Project

Hi,
I have a RoboHelp 9 HTML project that has a number of SWF files embedded in a number of the pages. The problem is the SWF won't display on the HTML page. The SWF files are published to version 11.x. The HTML pages work fine on my computer but I have Robohelp and Flash Pro installed. When I take it to any other computer in my office, the HTML pages load with no problem but the SWF files will not load onto the pages. Any help is appreciated.
Thanks

So you are saying that the SWF *WAS* actually displaying but was somehow unable to present the text?
For others that may wonder about what TLF is (as I did) I'll save you the Google step.
Click here to view
Cheers... Rick

Since I got OS10.8.2 Safari won't display online PDF files?

Since I got OS10.8.2 Safari won't display online PDF files?
Can anyone tell me what the problem is?

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Photo page won't display properly in safari

Hi everyone!
I'm completely new to building websites and need some of your expert advice?
For some reason my photo pages won't display properly in Safari but ok in Firefox?
It worked fine a week ago and I can't think what I've done wrong since I republished last night?
http://www.abeledo.talktalk.net/losavellanos/House.html
Can anyone help?
I'll buy you a pint!
Cheers

No luck unfortunately.
I changed the background to a solid and made the changes that you suggested roddy, but neither seemed to work. I know I must be doing something wrong? Do the photos appear ok with you roddy? All I see, is half the page i.e nav bar, top image, 'the house & garden etc text and top half of the darker box where the thumbnails should appear. And this happens with all 3 photo pages currently on the site.
http://www.abeledo.talktalk.net/losavellanos/House.html
http://www.abeledo.talktalk.net/losavellanos/Teror.html
http://www.abeledo.talktalk.net/losavellanos/The_Island.html
I've been clearing my cache in both browsers every time I republish.
I've also tried upgrading to the new 3.0.3 beta Safari? You'd think - out of all the browsers- iWeb would work seamlessly with Safari wouldn't you? - Firefox is fine.
Do you think I should start from scratch?

Text won't display

Similar Messages

Maybe you are looking for