Text won't paste -- a sus minus sign

Upload file first.

BobLevine wrote:
I haven't looked at the attachment but the first thing to look for when that happens is a no break attribute assigned to the text.
Bob
I checked that.
Not sure how you'd get a no break just by placing a text file, anyway.

Similar Messages

  • HT5137 I updated to ios7.0.2, when I double click on home button it brings up an app list but when I hold my finger on an icon it won't show any with a minus sign, is it no longer necessary to close apps?

    In ios 7.0.2, when you double click the home button it brings up the icons but won't allow you to show them with minus signs, is it no longer necessary to do this?

    jim96776 wrote:
    is it no longer necessary to do this?
    It was never necessary except in certain unusual circumstances.

  • I have an iPhone 4 and want to be able to send photos via ams. I hold down the copy button on the picture but when I go to paste it in the text of a message it won't paste. Any ideas on this please.Thanks

    I have an iPhone 4 and want to be able to send photos via sms. I hold down the copy button on the picture but when I go to paste it in the text of a message it won't paste. Any ideas on this please??Thanks

    No phone can send photos via SMS. You would need MMS (or iMessage or a 3rd party app such as WhatsApp). SMS messages are limited to 160 characters of text only.

  • When to export a numbers file to csv the minus signs don't work with R

    Friends,
    I have trouble getting the statistic program R to read my exported CSV-files from Numbers.
    The minus sign doesn't work, R reads it as a factoric input rather than numeric.
    Does anyone have a tip how to reformat this?
    Jocke

    Wayne, actually, I'm not sure but I think that factoric - or factorial is the denomination that R uses to say that somthing is rather a text than a numeric number - I'm pretty new to R.
    But, anyway, we solved the problem but in a lillte bit of an awkward way.
    The problem is that the minus sugns in numbers is percieved as dashes in R
    (http://www.R-project.org, a free-ware statistical analysis program)
    So where there is a numeric input with a minus sign R thinks it is a letter rather than a number.
    We solved it by exporting the numbers file to CSV, opened it in text editor, copied the suspisios minus sign and pasted it into the search field to find all dashes/minus sign that didn't work and replaced them with a minus sign. After this operation, nothing different could be seen in the text but R saw the difference.
    So this makes it difficult to explain by posting a screenshot - it looks the same but it isn't.
    The funny thing is that the dashes that numbers use when to express a date are percieved as minus signs by R.
    Can anyone understand what I tried to explain? And if so, is there a simpler way to do this? We have a lot of minus signs to export to R.....
    best regard
    Joachim

  • Before I upgraded my iPad mini, you could turn off apps to save battery power by double clicking the control button and then holding your finger on the app button until the minus sign appeared.  That doesn't work anymore.  How do you turn off the apps wit

    Before I upgraded my iPad mini, you could turn off apps to save battery power by double clicking the control button and then holding your finger on the app button until the minus sign appeared.  That doesn't work anymore.  How do you turn off the apps with ios7

    Now you swipe downward, the app will appear and you delete, keep scolling to the right as in the past.  With the new operating system you also swipe downward to get the search bar to find an app

  • Minus Sign in the Downloaded DME file using F110 Transaction

    Hi All,
    From the F110 Transaction I navigate to the DME Administration from the menu bar in order to download the DME file into my system. I could open the txt file that is downloaded. Now my requirement is to add a minus sign to the invoice amount of the txt file.
    I tried debugging the program to find out where the data is populated but was unable to. I can see the FM GUI_DOWNLOAD that downloads the file but the internal table contains hexadecimal data.I don't understand how this is converted to the text data.
    I'm unsure of what to do.... Any body has any suggestions.
    Regards,
    Shipin Paul

    Hi Anmol,
    Your answer helped me a lot. I am really thankful. But my issue is not solved.
    I went to the DMEE Transaction and gave the correct format and the tree type as input.
    Inside the format i went into the amount element as you have mentioned and included an exit module with the respective coding.
    Then i execute the transaction F110 with the Run date and Identification.
    I then navigate to the menubar Enviroment->Payment Medium->DME Administration so as to download it into my system as notepad.
    I select one of the entries and press the download button. But it does not stop at the exit which i included in the DMEE Transaction
    even though i have created a breakpoint there..
    Do you have any idea about this.
    Regards,
    Shipin Paul

  • Minus sign at the end of the value, Need to get Preceeding minus sign.

    Hello gurus,
    I am using following code in web dynpro to get data from a FM and downloading it to excel.
    for the numeric values I am getting minus sign at the end of the value in excel. but If I display the value in alv, it is coming fine. Please let me know where I am going wrong.
    ex: 4568-
          CALL FUNCTION 'Z_EXTRACT'
            EXPORTING
              extract   = z_extract
            TABLES
              it_data       = tab_et.
          DESCRIBE TABLE tab_et.
          IF sy-tfill GT 0.
            CLEAR: text, xtext.
            DATA :    v_fore9ldepl(17)      TYPE n.
            LOOP AT tab_et INTO rec_et.
             MOVE:
              WRITE:  rec_et-fore9ldepl TO v_fore9ldepl DECIMALS 3.
              CONCATENATE  text '1'
                                rec_et-z0g_cwwter                          
                                v_fore9ldepl
                     cl_abap_char_utilities=>newline INTO text SEPARATED BY ','.
                      cl_abap_char_utilities=>newline INTO text SEPARATED BY
                      cl_abap_char_utilities=>horizontal_tab.
            ENDLOOP.
            CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
              EXPORTING
                text   = text
              IMPORTING
                buffer = xtext.
            CLEAR:  filename, wa_files.
            CONCATENATE 'EXTRACT'   '.XLS' INTO filename.
            wa_files-content = xtext.
            wa_files-filename = filename.
            APPEND wa_files TO files.
      DATA izip TYPE REF TO cl_abap_zip.
      DATA output_file TYPE xstring.
      CREATE OBJECT izip.
      LOOP AT files INTO wa_files.
        izip->add( name = wa_files-filename
                    content = wa_files-content ).
      ENDLOOP.
      output_file = izip->save( ).
      CALL METHOD cl_wd_runtime_services=>attach_file_to_response(
      EXPORTING
      i_filename = 'TEST.ZIP'
      i_content = output_file
      i_mime_type = 'ZIP/APPLICATION'
           i_in_new_window = abap_false
      i_in_new_window = abap_true
      i_inplace = abap_false ).

    Hi,
    In the Context attribute tyr to use the properties of formatting where you can have the MINUS sign in the front of the value..
    If this is working fine then when you use any standard export of ALV the same (AS iS) is shown in Excel right...
    Regards,
    Lekha.

  • How to get a minus sign with the cost  field in ALV.

    Hi ,
    How to get a minus sign with the cost field in ALV.
    The Ouput will be displayed like  Rs -1500 instead of 1500-
    I can't use concatenate also as i may have to use the sum functionality of ALV .
    Cheers
    Sunny

    Hi sunny,
    1. The OTHER FIELD
       has to be character field of say length 15.
    2. Write the original numeric value to
       this character field (in a loop)
    3. But simply writing won't help.
    4. use this kind of logic.
    5.
    REPORT abc.
    DATA : m TYPE i.
    DATA : chr(15) TYPE c.
    m = -100.
    WRITE m TO chr.
    IF m < 0.
      SHIFT chr RIGHT BY 1 PLACES.
      CONDENSE chr.
      CONCATENATE '-' chr INTO chr.
    ENDIF.
    WRITE chr.
    regards,
    amit m.

  • Having trouble with Red minus signs on folders shared to my computer

    Here's the situation as best as I can describe it.
    We are working on 2 imacs.  iMac A as a 1TB harddrive attached to it via USB that has all the folders on it that we use to work.  iMac B is connected to A wirelessly and can "usually" access the contents of the harddrive through A with no problems.  However, every once in a while I click a folder on the harddrive and I get access (I'm on iMac B) to that folder but the subfolder inside that I need to access (the others are fine) has a red minus sign on it which is infuriating.  So far the only way we've been able to re-grant access to the folder for me is to either restart my computer or unplug and replug the harddrive into iMac A.
    Steps we have taken:
    Added full "read & write" permissions to both computers and users on both the folder, the sub folder, and the harddrive itself
    Attempted to set up additional users to access the folder differently
    Checked and unchecked "ignore ownership" on all of the above access points
    We find it strange that it's only sometimes I get locked out of the folder and other times I'm not.  It has to be some sort of glitch unless there's some sort of setting that locks me out if I make too many changes to the contents in that specific folder.  Any ideas or help would be greatly appreciated.

    The procedure below will reset the permissions of a home folder in OS X 10.7.4 or later. If you're running an earlier version of 10.7, update to the latest version first. This procedure should not be used in OS X versions older than 10.7.4.
    Back up all data before you begin.
    Step 1
    Click the Finder icon in the Dock. A Finder window will open.
    Step 2
    Press the following key combinations, in the order given:
    Command-3
    Shift-command-H
    Command-I
    The Info window of your home folder will open.
    Step 3
    Click the lock icon in the lower right corner and authenticate with the name and login password of an administrator on the system. If you have only one user account, you are the administrator.
    Step 4
    In the Sharing & Permissions section of the window, verify that you have "Read & Write" privileges. If not, use the "+" and "-" buttons in the lower left corner to make the necessary changes.
    Step 5
    By default, the groups "staff" and "everyone" have "Read Only" privileges. With those settings, the files at the top level of your home folder will be readable by other local users. You can change the privileges to "No Access" if you wish, but then your Public and Drop Box folders will be inaccessible to others, and Personal Web Sharing won't work. Most likely, you don't need to change these settings.
    Step 6
    If there are entries in the Sharing & Permissions list for users or groups besides "me," "staff," and "everyone," delete them.
    Step 7
    Click the gear icon at the bottom of the Info window and select Apply to enclosed items... from the drop-down menu. Confirm. The operation may take several minutes to complete. When it does, close the Info window.

  • Changing Minus sign to brackets in smartforms

    Hi Gurus.
    I would like to ask if there is a way to change the minus sign of a type int variabel into brackets.
    for example in smartforms,
    the value is   "900-"
    and i want to show it as (900).
    is there any mask provided in the smartforms?
    thx & rgds,
    William Prawira

    write a simple logic before printing this value
    define charater variable in global
    data : v_string type char20.
    in program line.
    data : v_value1 type i,
             v_str(20) type char.
    if v_value <= 0.
    v_value1 = v_value.
    v_str = v_value1.
    concatenate '('  v_str ')' into v_string.
    endif.
    in text node you can print this v_string.
    OR ELSE
    create a Alternate Node.
    in general tab create condition like
    filed < = 0.
    In true place text node
    place brackets before and after of variable
    In false place a text node
    as it is variable
    Edited by: murali papana on Sep 15, 2008 12:46 AM

  • Accordian panel with plus and minus signs to indicate state of panel

    I want the text to show [+] next to the title of the panel when it is collapsed and [-] when it is expanded
    just like http://www.reddit.com/r/indesign/comments/1jewqq/custom_kerning_applied_to_a_single_charac ter/
    the comments on this page can be expanded or collapsed by clicking the plus or minus sign
    how do i do this?

    I've started filling the accordion with my content and the
    cookie works fine. But I see some things I'd like to have changed
    if possible?
    a) When I load the page all accordion panels flips open at
    the same time and they stay open until the page has loaded. It's
    probably not visible in the demo because it's only a few bytes to
    load there. After the page has loaded the cookied panel stays open
    and the rest of the panels close. Is it possible to hide the
    loading of the panels somehow? This is kinda messy right now.
    b) I'd like to use the cookie to control the panels but only
    during the current session. When a new session occurs I'd like to
    start with all panels closed a) (or use the script that states
    default panel). The standard accordion use a small script to set
    the default open panel. I tried modifying this script but it looks
    like the accordion is following the laws of the cookie and is now
    ignoring this script.
    Panel 4 set to be default (0, 1, 2, 3):
    <script type="text/javascript">
    var Accordion1 = new
    Spry.Widget.Accordion.prototype("Accordion3");
    </script>

  • Issue with Minus sign in ALV

    Hi,
    I have a report program where the prices will be getting displayed. In the out put the last four fields of ALV is having values -235.52; -145.25; -457.25; -417.25. In the foreground execution, the output is proper. But in the background(spool), the same output is getting displayed as 235.52;145.25;-457.25;-417.25.
    The first two values 235.52 and 145.25 are getting displayed with out minus sign.
    Note: All the above fields are of same data type.
    What could be the possible issue here? Please provide your valuable inputs.
    Thanks,
    Viswanath A

    Hi, Below is the fieldcatalog code and is common for all 4 fields.
    WHEN 'CPP_FKBTR'.
            wa_fieldcat-col_pos              = 40.
            wa_fieldcat-seltext_l            = 'Commitment for past period'.
            wa_fieldcat-seltext_m            = 'Com past per'.
            wa_fieldcat-reptext_ddic         = 'Commitment past period'.
            wa_fieldcat-ddictxt   = 'L'.
            wa_fieldcat-no_out   = 'X'.
            MODIFY lv_fieldcat FROM wa_fieldcat.
    Thanks

  • Accessing the minus sign... Euclid Symbol Bold from InDesign

    I am working on a project for a client. I am using InDesign CC. Text is coming from Word on Windows.
    They are using MathType for equations and expressions. I want to be able to use the same minus sign in other places, but am getting an en dash.
    The Euclid Symbol minus sign has rounded ends, like the +, =, <, >, etc. The en dash has squared ends.
    I have no issues with the other operator symbols... just the minus sign.
    How do I get access to the minus sign?
    Currently using the TTF version of Euclid Symbol.
    Thanks

    Select Glyphs from the Type menu and see if there is a glyph you want in that font. If not, you may need a different font (possibly an OT Pro version).
    Oh, and there's also this.

  • I transferred data from my external hard drive to my restored Mac Book Pro via migration assistant and now my external hard drive in time capsule has red minus signs. How do I get rid of that without getting rid of any of my data?

    I used Migration Assistant to transfer my data from my external hard drive via Time Capsule to my restored Mac Book Pro. When I now go into Time Capsule I there are red minus signs in the corner of all the folders that are contained in my back up. How do I get rid of this and access my previous back-ups?

    Select the drive and Finder > Get info and at the bottom "ignore permissions on this volume"
    You can copy the files, but the ownership on the files still belongs to the other user account, once your done copying, then perform a #6 Reset Users Permissions and that will set all the ownership to that account.
    ..Step by Step to fix your Mac
    Another method is to copy the entire folder, then change it's permissions.

  • I increased my font with zoom for the first time & got it too large. It will not decrease using Control & minus sign.

    I use Firefox 4. Windows XP. I have tremors & must have accidentally clicked on something that made it open up with weird colors like it was in safe mode. It was in 8-bit so put it back on 32-bit and 1280 x 1024 pixels. Then the font was so small it is almost unreadable. Tried to change it in Firefox Tools, Options, & Content. This did not work. I then used Zoom after checking in Help but got the font so large I can't view my email right. It will not decrease when trying Control with the minus sign as suggested.

    Did you change the resolution in Control Panel > Display ?
    What is the native resolution of your video display (monitor)?

Maybe you are looking for