Text Wrap doesn't like 1.5mm but anything else is fine

I have a JPG image containing an enabled clipping path placed on a page. A text frame overlaps one side and the text wraps nicely around the edge of the clipping path (selected in the Contour Options) with a 1mm outset entered in the Text Wrap palette.
However, if I increase the outset to 1.5mm, the text stops wrapping altogether: it just runs across the picture as if I had switched Text Wrap off. Any other measurement is fine: 2mm is just great, as is 0mm, 1mm, 3mm, and so on. But at 1.5mm, I get no wrap at all.
I can get around this by switching Contour Options from Same As Clipping Path to Detect Edges, whereupon the 1.5mm outset works as it should. So no real harm done, but does anyone else think this is odd behaviour?
- Alistair

There are several other cut-out pictures on the same page, all with 1.5mm outset Text Wraps that cause no problem. We have removed the offending picture, resaved it in Photoshop, replaced it on the page, etc but it does the same thing.
Unfortunately, it's an InDesign CS2 layout so it won't be appropriate to file a bug report. Exporting to INX will be troublesome because the page and its slot in the plan is controlled by a CMS (i.e. exporting is no problem but getting it back in again and reconnecting all the broken CMS links while everyone's on deadline might be). I'd love to post the files here but my newspaper publisher customer wouldn't like it.
Thank you for your suggestions.
- Alistair

Similar Messages

  • My iTunes keeps freezing when I try to switch from the Summary page to the Podcasts page to try and manage which podcasts I sync to my iPod. It doesn't freeze when I manage anything else, only podcasts.

    My iTunes keeps freezing when I try to switch from the Summary page to the Podcasts page to try and manage which podcasts I sync to my iPod. It doesn't freeze when I manage anything else, only podcasts. I have the latest version if iTunes. I can't figure out why this is happening.

    Hello aczett,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1717
    Best of luck,
    Mario

  • ID CS3 - text wrap doesn't work at the end of a long multi-columned text frame

    Did a search - don't think this specific issue has been addressed:
    We design large graphics often used on walls. When working with a text frame that that was 11 feet long and had 8 columns, text wrap would not work on an image placed in the last column. The same image with the same text wrap applied will work fine anywhere else in the text frame. I found that if I shortened the width of the text frame a little bit at a time eventually it would work, but there doesn't seem to be a specific cut-off width - sometimes the last column won't text wrap when the frame is 115 inches wide and sometimes it doesn't work when the frame is only 80 inches wide. Again, all of the other columns work fine. I have tried all of the obvious stuff, the only variable between the columns that wrap and the one that doesn't is it's position at the end of the text frame.
    We have gotten around this issue by using multiple threaded frames instead of one long frame with multiple columns, but I am curious if anyone else has run into this or might know what the issue is.
    thanks

    Did a search - don't think this specific issue has been addressed:
    We design large graphics often used on walls. When working with a text frame that that was 11 feet long and had 8 columns, text wrap would not work on an image placed in the last column. The same image with the same text wrap applied will work fine anywhere else in the text frame. I found that if I shortened the width of the text frame a little bit at a time eventually it would work, but there doesn't seem to be a specific cut-off width - sometimes the last column won't text wrap when the frame is 115 inches wide and sometimes it doesn't work when the frame is only 80 inches wide. Again, all of the other columns work fine. I have tried all of the obvious stuff, the only variable between the columns that wrap and the one that doesn't is it's position at the end of the text frame.
    We have gotten around this issue by using multiple threaded frames instead of one long frame with multiple columns, but I am curious if anyone else has run into this or might know what the issue is.
    thanks

  • Text Wrap doesn't apply

    I brought in a photo and applied text wrap to it (wrap bounding box; wrap to both left and right) and it had no effect when I applied it to the text. I tried the text wrap command on another document and it worked fine. Any ideas what is happening? Thanks. (CS4 ID with 10.5.6)

    To where did you "bring it in"? Is it free-standing on the page or inline/anchored to some text?
    Is the photo in front of or behind the text? What is the setting of your Composition preference "Text Wrap Only Affects Text Beneath"?
    Dave

  • My ipod wont search on any free music apps but everything else searches fine

    I had a free music app where i would search dor the music to download it. But today my ipod 5 (ios 8) wouldnt search for any music but everythint else influding safari, app store, youtube, all searched like normal. The app i used before i deleted because of the problem would just crash at start up too. So now i have no music and i would like to not have to pay for all my songs. Plz help. Also idk if this is significant to the problem but at one point the ipod wasnt charging. It is charging now though. Its acting strangely.

    For strange acting iPod
    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                                              
    For the free music app problems:
    See:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    Contact the developer/go to their support site if only one app.
    Restore from backup. See:
    iOS: How to back up
    Restore to factory settings/new iPod
    Also see:
    http://www.digitaltrends.com/social-media/best-free-and-legal-music-download-sit es/

  • Blue Screen (after restart) but everything else is fine.

    Hi,
    I have an Xserve 2.3Ghz DP that is running fine a dandy except that the monitor connected to it shows just a blue screen. (no Dock, no menu bar). The strange thing is that when Retrospect starts up for it's automatic daily backup, the menu bar appears but it has only "retrospect options" available, the apple menu is all greyed out. Another anomaly is that during the startup procedure, I can see the grey apple "centered" onscreen, then the blue progress bar appears with all the normal information. But as soon as it's past those screens, the display just goes to a solid blue.
    As I said before, everything else seems fine, my retrospect backups are happening as scheduled.
    I use this server to burn and verify all my archives, so I really appreciated having a monitor connected. I've tried three other monitors all of them display just blue.
    I thought maybe the Dock was hidden, it's not. Any ideas or suggestions would be greatly appreciated.
    steph

    Turn off the modem while you're trying to access the router. And turn off any software firewalls or browser proxy settings.
    The box said windows xp or better... So I installed Linux!

  • Ever since I downloaded PP25 into my ipad mini, the computer itself recognizes it but any thing like iTunes, PP25, or anything else does not show up

    Please Help!
    I tried reinstalling my laptop,
    I tried updating my ipad mini,
    I tried to remove PP25, but still won't do a thing,
    I also removed the apps I downloaded,
    I tried almost everything please tell me another way!
    I tried to install other devices that can access the ipad mini from the computer,
    still will not work.

    Yeah - you may have well bricked it. About the only course of action I can recommend is to restore as a new device via itunes on a computer (but that may not work).

  • Ipod dial not working - but everything else is fine

    I tried resetting ipod (menu & center button)thinking this might help - but the dial still isn't working for volume or for scrolling - it just acts like it is dead. any advice?

    Really appreciate your help with this. I am a bit of a novice here.. but.. After some more searching on this issue I notice your comments (cut/pasted  below)  with respect to this router and bridging mode. You mentioned that I should update my firmware on this router and that this would (if I am interpreting your reply correctly) facilitate my LAN to LAN connection and of course using this router simply as an access point and more to the point -  having the use of the guest network. So my question is even if I did update firmware,  seems I would still require 3rd party software to make this work? (re your last sentence in your comments below)  Just need to understand the process and determine whether or not it is worth it (or maybe I should upgrade the router) but I don't want to change the configs of the network wired router at this time... and need to use the E2500 or facsimile as  simply an access point with  guest network functionality,  Thanks much appreciated.
    "Again: some E series routers already support wired bridging in firmware, i.e. to use the router as simple access point.
    This is and was always possible using a LAN-LAN setup instead.
    The problem with the LAN-LAN setup is, however, that you have some limitations accessing the network storage or network printer, e.g. the router doesn't have the correct time and you cannot access the storage from remote using port forwarding through your main router.
    These limitations have been overcome with the wired bridge mode (internet connection type = bridge mode).
    But again: this has absolutely nothing to do with wireless bridging. That's something completely different and is not supported on Linksys routers in any firmware version so far. To do wireless bridging (i.e. the Linksys routers connects wirelessly to another main router) you need 3rd party firmware."

  • My iPhone 4 screen has stopped functioning normally, the screen is just blank but everything else is fine. Help!

    I can receive calls and messages but cannot see them unless I do a screen shot then load it onto my computer. I have tried turning it off then on and also resetting it without success. It seems to be fully functioning apart from the screen being off. Can anyone help?

    Hey NJF7,
    Thanks for the question. After reviewing your post, it sounds like the screen is black. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    iPhone: Hardware troubleshooting
    Display has no backlight or dark screen
    Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
    Try turning iPhone off and then on again.
    While connected to the iPhone charger, try to reset the iPhone.
    If the low-battery screen appears, charge the iPhone.
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Guest access on E2500 not working but everything else is fine.

    HI.. I  did not use the CD to set up,  and instead set this router up manually. We are using this router right now as a hotspot only.. and all is good. I can see both new networks and the WIFI laptops are talking  no problem. Only  issue I have  is that guest access is not working - by that I mean it can't get out on the internet. I can see it as available and connect to it. Guest access and SSID broadcast are both enabled obviously.
    Is there something special guests have to type into a browser? Or did I need to use the CD? (I read on a google search that cisco connect on the CD must be used?)  Any help very much appreciated!

    Really appreciate your help with this. I am a bit of a novice here.. but.. After some more searching on this issue I notice your comments (cut/pasted  below)  with respect to this router and bridging mode. You mentioned that I should update my firmware on this router and that this would (if I am interpreting your reply correctly) facilitate my LAN to LAN connection and of course using this router simply as an access point and more to the point -  having the use of the guest network. So my question is even if I did update firmware,  seems I would still require 3rd party software to make this work? (re your last sentence in your comments below)  Just need to understand the process and determine whether or not it is worth it (or maybe I should upgrade the router) but I don't want to change the configs of the network wired router at this time... and need to use the E2500 or facsimile as  simply an access point with  guest network functionality,  Thanks much appreciated.
    "Again: some E series routers already support wired bridging in firmware, i.e. to use the router as simple access point.
    This is and was always possible using a LAN-LAN setup instead.
    The problem with the LAN-LAN setup is, however, that you have some limitations accessing the network storage or network printer, e.g. the router doesn't have the correct time and you cannot access the storage from remote using port forwarding through your main router.
    These limitations have been overcome with the wired bridge mode (internet connection type = bridge mode).
    But again: this has absolutely nothing to do with wireless bridging. That's something completely different and is not supported on Linksys routers in any firmware version so far. To do wireless bridging (i.e. the Linksys routers connects wirelessly to another main router) you need 3rd party firmware."

  • The" location svc. " on my iPhone 4S is disabled w/out me knowing ,now I have no GPS,but everything else works fine. it all happened after the latest update from Apple . The phone asks me to put a 4digit code (I don't have) to unlock the restriction on it

    Please help !
       It's been almost a month that the LOCATION SERVICE on my iphne 4S has been turned off and there's a restriction on it . Which requires a 4 digit code that I don't have and no one seeme to be able to help me on this .
    It all happened after I got the latest Apple iphone updates installed .  Just a note here, except for some photos and camera, especially the the flash for taking pictures having the mind of it's own ( wont flash most of the time even when you turn on the flash ) , ALL OTHER FUNCTIONC SEEM TO BE WORKING OK .
    I've tried backing up the phone on my computer and restoring it SEVERAL TIMES w/no success . The Apple store tried TWICE and cleared everything in my phone and we started it w/the factory settings,BUT BECAUSE I NEED TO HAVE ALL MY CONTACTS AND OTHER PERSONAL INFO'S, I HAVE TO RESTORE IT TO MY OWN  SETINGS .
    The problem is that when I restore the phone, it restores all my previous setting which PUTS EVERYTHING BACK IN TO MY PHONE THE WAY IT WAS BEFORE THE BACK UP AND KEEPS ASKING FOR THE 4 DIGIT PASS CODE AGAIN . I have no control of pick and choose what should be backed up .
    I HAVE TRIED EVERY POSSIBLE CODES THAT I COULD THINK OF AND IT KEEPS LOKING ME OUT ONE HOUR AT A TIME .
    Any one  out there can help me w/this I would be greatful to you .
    E  FARIAB

    Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

  • ITunes store has no pictures, but everything else works fine

    Suddenly after almost 1 year of using iTunes with no problems I logged on and found that no pictures display in the online store. I am connected and everything works fine...in other words, I can select an artist or song or movie and the page will change accordingly. I can play samples and all text is visible...just no pictures or graphics of any kind. I am at the latest software revision. What's the deal?

    In my case I also lost the scroll bars and the menus were out of alignment. Tried trashing plist with no success. Then tried Quicktime reinstall after trashing the quicktime plist. Problem solved! Obviously a Quicktime problem. Cheers

  • Cannot log into or reset WRT54G but everything else is fine?!?

    I have a WRT54G v8 that works fine, routs the internet connection just fine to my System, my uncles System, and then also to a Vonage modem for phone service. But from my system I cannot log into 192.168.1.1. The page never comes up, it always times out. Same on the other system. Both are hard wired, no wireless. I really need to be able to access ports and forwarding and what not. BUT, I also cannot seem to reset the thing. I had DMZ enabled for the vonage, and if I'm not mistaken, that is NOT the default setting yet every time I hold reset for 30+ seconds, the DMZ light comes back on. Can anyone offer help on this? Thanks.
    (Mod Note: Edited due to non-compliance of forum guidelines.)
    Message Edited by giantherockstar on 03-25-2008 02:21 PM

    Turn off the modem while you're trying to access the router. And turn off any software firewalls or browser proxy settings.
    The box said windows xp or better... So I installed Linux!

  • When I plug phone into laptop USB port it's unrecognized, but anything else I plug into USB works. How do I know if it's cord or phone? My cord works when plugged to wall outlet to charge.

    My phone charges when it's plugged into wall just find, then I try n use cord n plug to laptop to USB port and it's unrecognized. But other thugs worked plugged into USB port so I know it's not the computer. How do I know if it's my phone or the cord itself that is the issue??

    See Here for
    Device Not Recognised
    For PC
    http://support.apple.com/kb/TS1538
    For Mac
    http://support.apple.com/kb/ts1591
    Also... Try a Reset of the Phone... You will Not Lose Any Data...
    Turn the Phone Off... ( if it isn’t already )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    The Apple logo will Appear and then Disappear...
    Usually takes about 15 - 20 Seconds...
    Release the Buttons...
    Turn the Phone On...

  • My contacts are locked and I have shut the device off and still contacts are locked, but everything else appears fine.

    My contact app is locked on a contact, everything else is working fine.  I have shut the device off and onand no change???.

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe!

Maybe you are looking for