Text Wrapping of SubReport in Crystal Reports 2008
I am fully aware of the "Can Grow" option in the format editor screen of the subreport.
When I use the "Can Grow" Option - the Text is wrapping fine during the preview of the report, yet the subreport prints outside of the page's margins when the page is physically printed; however, if I set the font size to 9 pt, the text wraps correctly as expected during preview and print.
Any ideas as to why this may be happening? Anyone else having a similar issue?
Hi Taylor,
Check the length of the object displaying the text. The text will print within the size of the object, it has no concept of how large the subreport is, the text only knows the boundaries of the object it is in.
So if you shorten the length of your object in the subreport, it should wrap correctly. Make is about 1/4 inch shorter than you want it in the Main report.
Thanks,
Brian
Similar Messages
-
Crystal Report 2008 export to text problem
Hello,
I am using Crystal Reports 2008 for generating reports in our WPF application. In this application, we are exporting the report to txt file on a button click. Now the application contains a form called u2018Print Manageru2019, through which the user can print the exported report(text files). Now the issue, when we try to the any of the exported report file through the application, the printer leaves alternate blank pages. The printer used in this case is DOT MATRIX EPSON LQ-1150II ESC/P2. We even tried printing the text file on HP Laser jet 4600, but the same issue is faced.
Also, please note that when I try to read the exported txt file, a formfeed(u2018\fu2019 page break) character can be seen at the place where the printer leaves a blank page. Hence, my concern is, Is there any property of crystal report that I am missing on or is this a printer driver issue? But if it would have been a driver issue, then changing the printer might have solved the issue.
I also tried doing u2018Keep Togetheru2019 property = false of all the sections of the report. Also, I found that the u2018New Page Afteru2019 property = true and disabled for the u2018Page Footeru2019 section. So I set u2018New Page Afteru2019 property = false programmatically as
rdTest.ReportDefinition.Sections["Section5"].SectionFormat.EnableNewPageAfter = false;
but no luck.
If anyone has faced similar problem or have any clues, please help!
Any kind of help in solving this issue will be highly appreciated.
Thanks in anticipation!Good morning.
We've got something to get straight first
When you say "...from the Report Viewer. The report printed as expected on HP printer...", do you mean the viewer of the .NET app, or the viewer of the CR designer?
And version 12.0.0.683, is very old (well as far as CR is concerned anyhow ). That version is SP 1, we are now on SP 2. So that will be the place to start. Get to SP 2 which can be downloaded from here;
https://smpdl.sap-ag.de/~sapidp/012002523100009038092009E/cr2008win_sp2.exe
Ludek -
Crystal Report 2008 - Cross tab in subreport doesn't expand horizontally
Hello,
i'm migrating all my company's reports from crystal report X to crystal report 2008.
And i'm facing the following issue:
when a sub-report contains a cross-tab that is too large for one page, in crystal report X a second horizontal page is generated, but in Crystal report 2008 the second horizontal page is not visible.
Is it a known bug, is there a patch to install?Hi Abhilash,
thank you for your answer, but this workarround does not works in my case.
My main report is just a container for multiple subreports and some of them contains crosstab that can grow on several pages horizontally and vertically.
For example i have some crosstab that can span on more than 5 pages vertically and on 2 pages horizontally.
I tried to create an empty cross tab that span on 2 horizontal pages in the main report, and to mask it. That works for the first vertical page of the subreport but only for this one. Moreover if the first page of the crosstab contained in the subreport does not span horizontally, this solution create an unwanted empty page. -
How to export subreports along with main reports in crystal reports 2008
Hi
I am having serious issues in Crystal Reports 2008. While I was trying to export one of my reports(having 3 subreports) in to a pdf file,well only the main report data is getting exported.
My subreports are ON DEMAND SUBREPORTS.
Kindly help me in resolving this issue.
Thanks in advance
Sam_dwhThanks Debi for your answer.
Well now I am thinking of publishing the reports which I have generated ,so that client need not have to install crystal reports individually in their computers.But I don't have BO portal as such for publishing.
What will I do? -
Two problmes between Crystal Reports 2008 and Bex Query
Hi Gurus.
I have two problems with Crystal Reports 2008 when It obtains data from a Bex Query (SAP MDX query connection).
1) I have defined some Parameters Fields using the follow options:
Type: String
List of Values: Dynamic
Value Options Level1:
Show on (Viewer) Panel :Editable
Prompt text: <text>
Sort Order: Ascending by value
Prompt With description Only : False
Optional Prompt: True
Allow multiple values: True
Allow discrete values: True
Allow range values: False
When I execute the report with the client of Crystal Reports 2008 (the developer tool), in the initial screen shows a list box where I can select the values from the left box and add it to the left box (as a usually filter). When the number of options (LOV) is more than the maximum of the system, I have a input box bellow the list box, where I can insert any value (manually) and a button to insert it into the left box. When I publish the Report in the infoview, this filter is modified and the input box where I can introduce manually values is not showed and I can insert only the values showed in the list box, it causes that I can`t select a lot of values that is in the master data of SAP BW, because they arenu2019t listed in the list box.
There is any option to ability this option in the infoview.
2) My Bex query, have a date filter with variable in the restricted key figures, when I execute a Crystal Reports, the infoview (and the Crystal Reports 2008 designer) ask me 2 times the same date, first only the date and second the date and the rest of parameters (introduced in the report of Crystal Reports).
Why I need insert the date 2 times? How can I modify the Crystal Report for ask me only one time all the parameters?.
Thanks.Hi Abhilash.
Thank you for your information.
1) Yes, the parameters are created in the Crystal Reports designer. I have created the parameters in the Crystal Report because I use the same Bex Query to create some Crystal Report, in other case, I will need create some Bex Query.
2)The Bex query has the date filters and I have created some filters in Crystal Reports designer, the date filter from the Bex query is created automatically in the Crystal Report Designer but I don't use it, I haven't created it anytime. I use my filters only in the record selection. The date filters from the Bex query is showed as Static, and I can`t delete it, if I modify the parameter to dynamic or static with values, at first step ask me again static without values and the second step of the report execution ask me the parameter as I have defined in Crystal Reports Designer, my parameters fields are dynamic. A lot of reports have subreport, but I have created one of them without subreport (to trial) and the Crystal Reports ask me the date filters at first execution, and when I insert the date filters, in the second step, ask me the date filters again and my parameters fields again.
Thank you again. -
Crystal Reports 2008 Repository Explorer
Hi,
I am new to Crystal Reports 2008. I want to use Crystal Reports 2008 Repository. My question is as it was done in Crystal Report 9 Professional edition that a crystal report developer can create a Repository while using Crystal Report 9 Professional edition without Crystal report Server, Is this also possible with Crystal Report 2008. If we only have Crystal Report 2008 designer or developer edition, can we create Repository's i.e. Text Objects, Images, Custom Functions, SQL Commands etc without having Crystal Report 2008 Server, if yes please let me know the method.
Thanks in advance
Thanks
VipinHi,
I was on web found this link
http://www.crystalkeen.com/articles/crystalreports/repository.htm
which says that:
Crystal Reports: Repository
A solid understanding of the repository can really improve the the efficiency, accuracy, and cost-effectiveness of your reports. Hammerman and Associates offers classes on this very subject. We aren't going to cover all of it here, but will provide some highlights.
Use the CR9 Repository for those commonly used objects
The Crystal Reports 9.0 repository is a great place to store some commonly used items in your report. This includes text strings, images, SQL Commands (see next item) and Custom Formulas.
The Repository is initially stored in an Access database and has an ODBC connection with the System DSN of u201CCrystal Repository.u201D But you can use any ODBC data source including a database in your network so you can all share the same common objects.
Create a new database for the repository. We recommend you copy the existing MS-Access database, but you can start with an empty database. (The initial repository is Repository_en.mdb, stored in C:\Program Files\Common Files\Crystal Decisions\2.0\bin).
Create an ODBC connection to the new database. The new database does not have to be an Access database. If you use your SQL Server or Oracle server then, by using server security you can control who can view and who can edit items in the repository.
You next need to set Crystal Reports 9.0 to use this new Database connection. This control information is stored in an INI file and can be edited with any text editor such as NotePad. The INI file is at C:\Program Files\Common Files\Crystal Decisions\2.0\bin\orMap.ini .
There is a line in this file that saysu2026 Crystal Repository=Crystal Repository .
Edit this to say Crystal Repository=New ODBC DSN.
Is this also possible with Crystal Report 2008 designer/developer edition.
Thanks
Vipin -
SAP Crystal Report (2008) through SQL Query parameters
Hi,
I Created a report in Crystal report (2008) based on Sql Query. I created parameters in SQL query prompt only (all single valued).
Based on this I need to show the data in detail section.
For Graph, I used another SQL query, and added one subreport to the Main report header section. Since this subreport is also using the SQL query prompts for taking parameters.
Since both the reports are using same set of parameters. I mapped Main report parameters to sub-report parameters.
So Now structure is like,
In a report there is one subreport.
Main report ....SQL query generates parameter prompt..same parameters is passed to subreport.
In subreport there are sql generated prompts. and we mapped that prompts to main report parameter prompts.
Now it is running fine from crystal report, but not from CMC. It is not showing the graph.
Made Two Experiment:
1. To check subreport is running or not , Mannualy put my name in sub report--working fine.(CMC)
2. To check the parameters are correctly mapped--printed the value in subreport--Showing all the parameters value from CMC
but it is not running the SQL query of that sub report.
Any suggestion ?? Or is there anyoption to check?? Or a CMC setting.
Please suggest and respond..
Thank you in advance.!!Hi Rajeev,
This is Crystal reports development community, you said the report is working fine in Crystal. it is problem in CMC. So the issue is at BI Server.
So i think you need to create the thread in the below community.
BI Platform
--Naga -
Sub Report not working in Crystal Report 2008 using JSP
I am having developer license of Crystal Report 2008. I am able to generate report using Java JDK 1.5 , JSP,Oracle10g , deployed on WebSphere Application Server 6.1.0.29. I am not able to generate Sub reports. Can you please help us with sample code to how to call and configure subreport and please send configuration CRConfig.xml.
The below Error is Occurred on generating report.
On condition when we link the main report to subreport through parameter.
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: java.lang.NullPointerException---- Error code:-2147467259 Error code name:failed
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:741)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:167)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(SourceFile:529)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(SourceFile:527)
at com.crystaldecisions.reports.common.ThreadGuard.syncExecute(SourceFile:102)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(SourceFile:525)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(SourceFile:424)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(SourceFile:352)
at com.businessobjects.sdk.erom.jrc.a.a(SourceFile:54)
at com.businessobjects.sdk.erom.jrc.a.execute(SourceFile:67)
at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(SourceFile:716)
at com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(SourceFile:125)
at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:537)
at com.crystaldecisions.sdk.occa.report.application.ds.a(SourceFile:186)
at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(SourceFile:1558)
at com.crystaldecisions.sdk.occa.report.application.ReportSource.getPage(SourceFile:767)
at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.getPage(SourceFile:324)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.getPage(SourceFile:149)
at com.businessobjects.report.web.event.s.a(SourceFile:158)
at com.businessobjects.report.web.event.s.a(SourceFile:127)
at com.businessobjects.report.web.event.bt.a(SourceFile:47)
at com.businessobjects.report.web.event.bw.broadcast(SourceFile:93)
at com.businessobjects.report.web.event.am.a(SourceFile:53)
at com.businessobjects.report.web.a.t.if(SourceFile:2104)
at com.businessobjects.report.web.e.a(SourceFile:300)
at com.businessobjects.report.web.e.a(SourceFile:202)
at com.businessobjects.report.web.e.a(SourceFile:135)
at com.crystaldecisions.report.web.ServerControl.a(SourceFile:607)
at com.crystaldecisions.report.web.ServerControl.processHttpRequest(SourceFile:342)
at com.ibm._jsp._CrystalReportViewer._jspService(_CrystalReportViewer.java:107)
at com.ibm.ws.jsp.runtime.HttpJspBase.service(HttpJspBase.java:87)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1143)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:591)
at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:481)
at com.ibm.wsspi.webcontainer.servlet.GenericServletWrapper.handleRequest(GenericServletWrapper.java:122)
at com.ibm.ws.jsp.webcontainerext.AbstractJSPExtensionServletWrapper.handleRequest(AbstractJSPExtensionServletWrapper.java:226)
at com.ibm.ws.jsp.webcontainerext.AbstractJSPExtensionProcessor.handleRequest(AbstractJSPExtensionProcessor.java:286)
at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:3453)
at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:267)
at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:815)
at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1466)
at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:119)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:458)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:387)
at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:102)
at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:196)
at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:751)
at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:881)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1473)
Caused by: java.lang.NullPointerException
at oracle.jdbc.driver.OracleResultSetMetaData.<init>(OracleResultSetMetaData.java:84)
at oracle.jdbc.driver.ScrollableResultSet.getMetaData(ScrollableResultSet.java:1282)
at com.crystaldecisions.reports.common.data.JdbcCrystalResultSet.getMetaData(Unknown Source)
at com.businessobjects.reports.jdbinterface.common.ResultSetReader.bindToField(Unknown Source)
at com.crystaldecisions.reports.queryengine.ResultSetRecordReader.a(SourceFile:80)
at com.crystaldecisions.reports.queryengine.Rowset.a(SourceFile:1107)
at com.crystaldecisions.reports.queryengine.Rowset.z9(SourceFile:1025)
at com.crystaldecisions.reports.queryengine.Rowset.Aa(SourceFile:988)
at com.crystaldecisions.reports.queryengine.Rowset.z3(SourceFile:967)
at com.crystaldecisions.reports.queryengine.Rowset.bL(SourceFile:533)
at com.crystaldecisions.reports.queryengine.Rowset.zM(SourceFile:245)
at com.crystaldecisions.reports.queryengine.RowsetBase.zA(SourceFile:156)
at com.crystaldecisions.reports.queryengine.QueryInfo.vE(SourceFile:261)
at com.crystaldecisions.reports.datafoundation.DFQuery.for(SourceFile:628)
at com.crystaldecisions.reports.datalayer.a.do(SourceFile:1621)
at com.crystaldecisions.reports.datalayer.a.a(SourceFile:1404)
at com.crystaldecisions.reports.dataengine.m.b(SourceFile:334)
at com.crystaldecisions.reports.dataengine.j.b(SourceFile:515)
at com.crystaldecisions.reports.dataengine.m.o(SourceFile:408)
at com.crystaldecisions.reports.dataengine.m.a(SourceFile:173)
at com.crystaldecisions.reports.dataengine.ContextNode.a(SourceFile:114)
at com.crystaldecisions.reports.dataengine.ContextNode.a(SourceFile:95)
at com.crystaldecisions.reports.dataengine.j.case(SourceFile:1080)
at com.crystaldecisions.reports.dataengine.h.<init>(SourceFile:108)
at com.crystaldecisions.reports.dataengine.DataContext.a(SourceFile:254)
at com.crystaldecisions.reports.dataengine.DataProcessor2.a(SourceFile:4660)
at com.crystaldecisions.reports.dataengine.DataProcessor2.a(SourceFile:4574)
at com.crystaldecisions.reports.dataengine.DataProcessor2.new(SourceFile:2652)
at com.crystaldecisions.reports.dataengine.DataProcessor2.byte(SourceFile:2610)
at com.crystaldecisions.reports.dataengine.DataProcessor2.try(SourceFile:2282)
at com.crystaldecisions.reports.dataengine.DataProcessor2.int(SourceFile:2442)
at com.crystaldecisions.reports.dataengine.DataProcessor2.I(SourceFile:1013)
at com.crystaldecisions.reports.dataengine.DataProcessor2.if(SourceFile:4816)
at com.crystaldecisions.reports.dataengine.DataProcessor2.a(SourceFile:2020)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.ObjectFormatter.a(SourceFile:309)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.ObjectFormatter.a(SourceFile:250)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.u.a(SourceFile:922)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.u.e(SourceFile:784)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.u.for(SourceFile:242)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.aa.a(SourceFile:64)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.ObjectFormatter.a(SourceFile:243)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.ObjectFormatter.a(SourceFile:210)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.v.a(SourceFile:185)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.v.a(SourceFile:230)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.ai.for(SourceFile:359I'm not sure I understand what you mean by tabbed reporting. Do you mean having multiple reports open at once within the Crystal Reports Designer?
If this is the case, the viewer is designed to only have one report open at a time. -
Problem in Crystal Report 2008 selectionFormula
Post Author: saro_j
CA Forum: Crystal Reports
Hi,
I am having a strange problem in Crystal report 2008. Earlier I was using VS 2005 Crystal report. Then we purchased Crystal report 2008.
When I open the VS 2005 projects it asks the reports to convert into Crystal report 2008. I did that.
Earlier I was using the following syntax for passing the date as selectionFormula
Dim selectionFormula As String = "{tblClient.Name} = '" & ddlClient.SelectedItem.Text & "' and {TBILL_File_Format.Week Ending Date} = #" _& Convert.ToDateTime(DtCtrlProDateFrom.DateTimeValue) & "#u201D WeeklyReportByClientNameReport.DataDefinition.RecordSelectionFormula = selectionFormula
But now when I run this same it says
This field name is not known. Details: errorkind Error in the file rptWeeklyReport.rpt: Error in formula Record_selection:
u2018{tblClient.Name} = 'ABC10' and "{TBILL_File_Format.Week Ending Date} = #04/20/2008#u2019 This field name is not known. Details: errorkind
I have no idea about this
Even If I tried to pass as follows
selectionFormula = "{TBILL_File_Format.Week Ending Date} = DateTime (2008, 04, 25, 00, 00, 00) and {TBILL_File_Format.Client Code} = 'ABC10' "
I couldnu2019t see any record on the report except Grouptree of the report. If I export the report it has all the data as I expected.
Please help me out on this regards.
Thanks in advance
SaravananPost Author: jehanzeb
CA Forum: Crystal Reports
Hello,
I use CR2008 and VS2005, it never asked me to convert the file into VS2005. What do you mean by VS 2005 asked you to convert the file? Did you make the file in CR2008 and then imported it into VS2005 as a Report Document?
I usually create a report on CR2008 and then move that report (copy) to the same folder as VS project folder, then from there I create a new Report Doc in VS and open the file.
As you mentioned when you export the report it works fine but when you run it it gives errors. I think it is because of the import of the report. Look at the error message as it says the field name is not known, I suspect it is not connected/imported properly.
"This field name is not known. Details: errorkind Error in the file rptWeeklyReport.rpt: Error in formula Record_selection:
u2018{tblClient.Name} = 'ABC10' and "{TBILL_File_Format.Week Ending Date} = #04/20/2008#u2019 This field name is not known. Details: errorkind"
I think it is becasue of the import of the report or could be becasue you didnt save the report with an option of "save report data". Check your report and reimport it. might fix the problem:D -
Crystal Reports 2008 and Dynamic Images
Hello,
I have a windows .net application that uses a listing of items in a grid. The user selects an item then clicks the print button and that brings up a report viewer form and passes the photograph location in a parameter to the report document being loaded.
The first time that this report is printed, the image for the selected item is printed correctly. The next time the report is printed, the default image used to create the graphic object on the report is printed.
In addition if a user double clicks on the listing of items, a detail form is displayed. When the same report is printed from this screen, the default image used to create the graphic object on the report is printed.
This is happening in multiple .net windows applications.
Can anyone please give me an idea as to what may be causing this.
I am using Crystal Reports 2008 with Service Pack 2 installed.
ThanksThe following is the code in the Report Viewer form that contains the Crystal Report Viewer Control.
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Imports CrystalDecisions.Windows.Forms
Imports System.IO
Public Class RptViewer
Inherits System.Windows.Forms.Form
Dim MyReport As CrystalDecisions.CrystalReports.Engine.ReportDocument
#Region " Windows Form Designer generated code "
Public Sub New()
MyBase.New()
'This call is required by the Windows Form Designer.
InitializeComponent()
'Add any initialization after the InitializeComponent() call
End Sub
'Form overrides dispose to clean up the component list.
Protected Overloads Overrides Sub Dispose(ByVal disposing As Boolean)
If disposing Then
If Not (components Is Nothing) Then
components.Dispose()
End If
End If
MyBase.Dispose(disposing)
End Sub
Friend WithEvents CrystalReportViewer1 As CrystalDecisions.Windows.Forms.CrystalReportViewer
'Required by the Windows Form Designer
Private components As System.ComponentModel.IContainer
'NOTE: The following procedure is required by the Windows Form Designer
'It can be modified using the Windows Form Designer.
'Do not modify it using the code editor.
<System.Diagnostics.DebuggerStepThrough()> Private Sub InitializeComponent()
Dim resources As System.ComponentModel.ComponentResourceManager = New System.ComponentModel.ComponentResourceManager(GetType(RptViewer))
Me.CrystalReportViewer1 = New CrystalDecisions.Windows.Forms.CrystalReportViewer
Me.SuspendLayout()
'CrystalReportViewer1
Me.CrystalReportViewer1.ActiveViewIndex = -1
Me.CrystalReportViewer1.BorderStyle = System.Windows.Forms.BorderStyle.FixedSingle
Me.CrystalReportViewer1.Dock = System.Windows.Forms.DockStyle.Fill
Me.CrystalReportViewer1.Location = New System.Drawing.Point(0, 0)
Me.CrystalReportViewer1.Name = "CrystalReportViewer1"
Me.CrystalReportViewer1.Size = New System.Drawing.Size(656, 481)
Me.CrystalReportViewer1.TabIndex = 0
Me.CrystalReportViewer1.ToolPanelView = CrystalDecisions.Windows.Forms.ToolPanelViewType.None
'RptViewer
Me.AutoScaleBaseSize = New System.Drawing.Size(5, 13)
Me.ClientSize = New System.Drawing.Size(656, 481)
Me.Controls.Add(Me.CrystalReportViewer1)
Me.Icon = CType(resources.GetObject("$this.Icon"), System.Drawing.Icon)
Me.Name = "RptViewer"
Me.Text = "Report Viewer"
Me.WindowState = System.Windows.Forms.FormWindowState.Maximized
Me.ResumeLayout(False)
End Sub
#End Region
Private Sub RptViewer_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles MyBase.Load
Try
Dim myConnectionInfo As ConnectionInfo = New ConnectionInfo()
myConnectionInfo.ServerName = MyServer (Name of SQL Server)
myConnectionInfo.DatabaseName = MySqlDb (Name of Database)
myConnectionInfo.UserID = MyUid (Userid for SQL Database)
myConnectionInfo.Password = MyPwd (Password for SQL Database)
MyReport = New CrystalDecisions.CrystalReports.Engine.ReportDocument
MyReport.Load(Path.GetFullPath(".") & "\" & MyReportFile)
MyReport.SummaryInfo.ReportTitle = MyReportTitle (Title passed to the report)
MyReport.SummaryInfo.ReportComments = MyReportComments (Comments passed to the report)
SetDBLogonForReport(myConnectionInfo, MyReport)
MyReport.SetParameterValue("MySequence", MyReportKey) (Parameter passed to select single record in table)
MyReport.SetParameterValue("MyPhotoLocation", sPhotoLocation) (Physical Location of Photograph \\Server\Photos\)
CrystalReportViewer1.ReportSource = MyReport
'handle any exceptions
Catch ex As Exception
MessageBox.Show(ex.Message, "Report could not be created", MessageBoxButtons.OK)
End Try
End Sub
Private Sub SetDBLogonForReport(ByVal myConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
Dim myTables As Tables = myReportDocument.Database.Tables
Dim myTable As CrystalDecisions.CrystalReports.Engine.Table
For Each myTable In myTables
Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
myTableLogonInfo.ConnectionInfo = myConnectionInfo
myTable.ApplyLogOnInfo(myTableLogonInfo)
Next
End Sub
End Class
In the Crystal Report the Graphic Location formula field takes the {?MyPhotoLocation} + {Table.Photo} field to display the picture. I have placed the parameter and the photo field on the report and the correct data is in the fields.
This is the exact same form being opened and that displays correctly from the listing screen.
Joel
Edited by: JYaeger on Aug 8, 2009 2:56 AM -
Crystal Reports 2008 export to PDF does not render Japanese fonts
Hello,
I have searched the forums for this issue, and there does not seem to be a clear resolution to this problem. We are using CR2008 to create RPT files that are bundled with our custom .NET 2005 application, which then generates reports in PDF format by running the RPT files against an access mdb database using the CR2008 runtime (our application is deployed on a different machine than the one that is used to create the RPT files). The issue we are having occurs when data in the access mdb file contains Strings with Japanese characters. The system that our application is running on does contain the eastern asian language fonts so if a user opens the mdb file using access, they can see the Unicode strings in the database rendered properly (rather than the usual boxes and garbage). However, once our application generates the report filling in the rpt file with data from the mdb and exporting the report to pdf format, the entries that should contain Japanese font data, which leads me to believe the problem is in the export pdf function of the crystal reports 2008 runtime. Is there anyway we can configure the runtime to properly embed the fonts in the PDF so that the users can view the Japanese content from the database. Our users end up viewing reports on both OSX and Windows using Adobe Acrobat Reader.
Thank you very much in advanceThanks for the quick reply!
1) Exact version of Crystal Reports. (Open Crystal Developer. Go to Help> About Crystal Reports).
12.0.0.683
Type: Full
2) What happens if you export the report to PDF format from the standalone Crystal Reports Designer?
Same result. The entry shows up as giberish in the report designer preview...however, by doing this I stumbled upon something. See below
3) Are you able to export the report to other formats without any issue?
See Note below
NOTE:
In another part of the report, I just put the fields in question directly in the report (that is, not embedded in a text object). That part of the report when run produces the correct non-gibberish, properly rendered Japanese result (in the CR designer preview). The same field, however, when embedded in a text object, results in the gibberish being shown in the designer preview as well.
Now when I export this to PDF, that ends up turning both areas into the incorrect, gibberish result. Both the one that did properly render in the preview (field not embedded in text object) and the one in the text object.
Exporting to any other format (tried xls, rtf and html) results in correct rendering for the field not embedded in the text object and incorrect rendering for the field embedded in a text object.
Hope this helps with the problem, and I think it means this thread probably still belongs under this current forum.
Cheers -
How to change the name of a Box Object in Crystal Reports 2008
I am trying to change the name of a box object in a crystal report - 2008. This report was originally developed by consultants and requires that certain boxes be named according to a specific naming convention. I am making a change to the report and need to add a box with a name that matches the naming convention. This is so some program functionality will work for the new box. I can't contact the consultants because they don't work with our company anymore.
Does anybody have any ideas? I've tried 'Format Box', but it won't let me change the name from there. I also tried it in the Report Explorer but to no avail.
Thanks,
JoanneHi Joanne,
Boxes do not actually have a 'name'. When you add a Box in a report, it will be called 'Box 1' by default. And the only place this name is visible is under the Report Explorer.
Or do you mean to say 'Text Object'?
-Abhilash -
How to configure Crystal Reports 2008 and IIS7 and Windows Server 2008?
I have downloaded and installed the trial for Crystal Reports 2008 on our Windows 2008 server. I can open Crystal Reports on the server just fine, but I get HTTP 500 errors when I attempt to view a report hosted on that server via the web.
As far as I can tell, the handler mappings in IIS7 are not configured properly, although I confirmed that the Crystal Reports 2008 install did add several handlers. I read that I must configure the application pool to enable 32-bit applications. I did that and am still getting the same error. Documentation seems sparse and I've spent the better part of the day searching the forum here with no luck. What am I missing?Don,
Thank you for the quick response!
We will ultimately be using ASPX/C#, but this simple case has a very basic report with no databind, just a single text label that reads "test succeeded" and I'm attempting to access it by direct URL (i.e. "http://192.168.99.21/crystalreportviewers12/test.rpt"). This works on our Windows 2000 server running Crystal Reports 8.
I've also tested with a simple test.aspx file with only the line "Response.Write(System.DateTime.Now.ToString())" and that works just fine. This file is in the same folder as the test.rpt file.
If I leave the Application Pool set for the "Integrated" managed pipeline mode, I continue to get a rather generic "500 - Internal server error". If I switch it to "Classic", I get the following error:
Failed to Execute URL.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.HttpException: Failed to Execute URL.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[HttpException (0x80004005): Failed to Execute URL.]
System.Web.Hosting.ISAPIWorkerRequestInProcForIIS6.BeginExecuteUrl(String url, String method, String childHeaders, Boolean sendHeaders, Boolean addUserIndo, IntPtr token, String name, String authType, Byte[] entity, AsyncCallback cb, Object state) +2004965
System.Web.HttpResponse.BeginExecuteUrlForEntireResponse(String pathOverride, NameValueCollection requestHeaders, AsyncCallback cb, Object state) +390
System.Web.DefaultHttpHandler.BeginProcessRequest(HttpContext context, AsyncCallback callback, Object state) +223
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +8674594
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155 -
ASP Crystal Report 2008 (12) Oracle 9 and Visual Basic!
Hi All,
I'm mainting an old application and I need to simulate the same client environment in my machine.
I have a VB application (with COM+ server components) that's creates a report object with parameters. But the only thing that this application does it's call an ASP page that contains all the logic to call a .rpt file, connect to Oracle 9i and then show the crystal report inside a MS webbrowser component (activeX) in the VB form.
I already setup the IIS, and the site there, I put all the .rpt files in the site and if you try to access without calling from VB you can run the asp pages, but the reports still doesn't appears.
These ASP pages should connect to Oracle and then show the rpt file, but I'm facing the following error:
The url that's the application creates is for example this: http://localhost/application1/createreport.asp?sSessionId=2&ReportName=TransactionsProcessed.rpt¶meter1¶meter2... etc etc...
Script Error Number: -21471922153
File could not be opened because the library "P2sora7.dll" cannot be found.
User Error Text: An error has ocurred in CreateReport.asp while logging onto the Oracle database server. Please try again.
I already check the database connection and it is working fine using ODBC, and the application works fine with the database.
The file p2sora.dll is in C:\WINDOWS\SYSTEM32, I already copied from another machine, and I have installed Crystal Report 2008 (12) in my server machine with Windows 2003 server, that's the application and web server where report should be run. I know that the old application was executed with Crystal 7, but I cannot found this version to buy.
Edited by: Don Williams on Mar 21, 2010 9:05 AMThis is the code of the createPage.asp that it's called from VB:
<%
On Error Resume Next
Dim sDLLName
Dim sDatabaseType
Dim sServerName
Dim sUserId
Dim sPassword
Dim arrayInteger
Dim sReportDbName
Dim oTransStore
Dim oReportObject
Dim oCRSections
Dim oCRSection
Dim oCRSubReportObject
Dim oCRReportObjects
Dim oCRReportObject
Dim oCRSubReport
Dim oCRPageEngine
Dim sSessionId, sReportPath, sReportName, sTablename
' Errorhandling Parameters
Dim lUserErrorNumber, sUserErrorText
' -- Get parameters --
sSessionId = Request.QueryString("SessionId")
sReportName = Request.QueryString("ReportName")
sStartDay = Request.QueryString("StartDay")
sStartMonth = Request.QueryString("StartMonth")
sStartYear = Request.QueryString("StartYear")
sEndDay = Request.QueryString("EndDay")
sEndMonth = Request.QueryString("EndMonth")
sEndYear = Request.QueryString("EndYear")
sAccName = Request.QueryString("AccId")
sUserName = Request.QueryString("UserName")
' -- Initialisation --
Session("ImageFolder") = ".\images"
sDatabaseType = Request.QueryString("DbType")
sServerName = Request.QueryString("ServerName")
sUserId = Request.QueryString("DbUserId")
sPassword = Request.QueryString("DbPassword")
sReportPath = Request.QueryString("ReportsFolder")
' -- Select DLL for DB Type
- Hide quoted text -
sDLLName = "P2sora7.dll"
Response.Write "DATABASE SELECCIONADA: " & sDatabaseType
Select Case sDatabaseType
Case "Oracle":
sDLLName = "P2sora7.dll"
sReportDbName = ""
Case "SQLServer":
sDLLName = "P2ssql.dll"
sReportDbName = Request.QueryString("ReportsDbName")
Case "Informix":
sDLLName = "P2sifmx.dll"
End Select
' -- Set the ErrorNumber to 400 and sErrorText.
sUserErrorText = "An error has occurred in CreateReport.asp while loading the report details. CreateObject(CrystalRuntime.Application) . Please try again."
lUserErrorNumber = 400 -
Database Logon Failed which created by Crystal Report 2008
this time i meet the famous error again which is database logon failed.
i created a crystal report 2008 starting from blank report, then connect with odbc
i use 2008 method
objRpt.SetDatabaseLogon(db_username, db_password, odbc_name, database_name);
2008 method will get database logon failed even set database location and verify database again
then i use 8.5 method and try again for 2008 report. it said field name is unknown for one of formula
then i drag field again for formula and set database location and verify database again
it said the same error.
then i uninstall 8.5 crytal report software in window 7 deployment machine, and do above again, it said the same error
//'Create a new Stored Procedure Table to replace the reports current table.
CrystalDecisions.ReportAppServer.DataDefModel.Procedure boTable = new CrystalDecisions.ReportAppServer.DataDefModel.Procedure();
//'boMainPropertyBag: These hold the attributes of the tables ConnectionInfo object
PropertyBag boMainPropertyBag = new PropertyBag();
//'boInnerPropertyBag: These hold the attributes for the QE_LogonProperties
//'In the main property bag (boMainPropertyBag)
PropertyBag boInnerPropertyBag = new PropertyBag();
//'Set the attributes for the boInnerPropertyBag
boInnerPropertyBag.Add("Connect Timeout", "15");
//boInnerPropertyBag.Add("Data Source", "MyDataSource");
boInnerPropertyBag.Add("Data Source", "10.1.1.191");
boInnerPropertyBag.Add("DataTypeCompatibility", "0");
boInnerPropertyBag.Add("General Timeout", "0");
//boInnerPropertyBag.Add("Initial Catalog", "MyCatalog");
boInnerPropertyBag.Add("Initial Catalog", database_name);
boInnerPropertyBag.Add("Integrated Security", "False");
boInnerPropertyBag.Add("Locale Identifier", "1033");
boInnerPropertyBag.Add("MARS Connection", "0");
//boInnerPropertyBag.Add("OLE DB Services", "-5");
//boInnerPropertyBag.Add("ODBC", "-5");
boInnerPropertyBag.Add("ODBC", "Cheque");
boInnerPropertyBag.Add("Provider", "SQLNCLI");
boInnerPropertyBag.Add("Tag with column collation when possible", "0");
boInnerPropertyBag.Add("Trust Server Certificate", "0");
boInnerPropertyBag.Add("Use Encryption for Data", "0");
//'Set the attributes for the boMainPropertyBag
boMainPropertyBag.Add("Database DLL", "crdb_ado.dll");
//boMainPropertyBag.Add("Database DLL", "p2sodbc.dll");
//boMainPropertyBag.Add("QE_DatabaseName", "VEPILOT");
boMainPropertyBag.Add("QE_DatabaseName", database_name);
//boMainPropertyBag.Add("QE_DatabaseType", "OLE DB (ADO)");
boMainPropertyBag.Add("QE_DatabaseType", "ODBC");
//'Add the QE_LogonProperties we set in the boInnerPropertyBag Object
boMainPropertyBag.Add("QE_LogonProperties", boInnerPropertyBag);
boMainPropertyBag.Add("QE_ServerDescription", "MyServer");
boMainPropertyBag.Add("QE_SQLDB", "True");
boMainPropertyBag.Add("SSO Enabled", "False");
//'Create a new ConnectionInfo object
CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo boConnectionInfo = new CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo();
//'Pass the database properties to a connection info object
boConnectionInfo.Attributes = boMainPropertyBag;
//'Set the connection kind
boConnectionInfo.Kind = CrConnectionInfoKindEnum.crConnectionInfoKindCRQE;
//'*EDIT* Set the User Name and Password if required.
boConnectionInfo.UserName = db_username;
boConnectionInfo.Password = db_password;
//'Pass the connection information to the table
boTable.ConnectionInfo = boConnectionInfo;
CrystalDecisions.ReportAppServer.DataDefModel.Tables boTables = objRpt.ReportClientDocument.DatabaseController.Database.Tables;
CrystalDecisions.CrystalReports.Engine.Tables tables = objRpt.Database.Tables;
foreach (CrystalDecisions.CrystalReports.Engine.Table table in tables)
if (!string.IsNullOrEmpty(table.Name))
//boTable.Name = table.Name;
//boTable.QualifiedName = database_name + ".dbo." + table.Name;
//boTable.Alias = table.Name;
boTable.Name = "sp_ChequeIssueDetRpt";
boTable.QualifiedName = database_name + ".dbo.sp_ChequeIssueDetRpt";
boTable.Alias = "sp_ChequeIssueDetRpt";
objRpt.ReportClientDocument.DatabaseController.SetTableLocation(boTables[0], boTable);
objRpt.VerifyDatabase();
http://sourceforge.net/projects/aspchequesprint/files/ChequeIssueDet.rpt/downloadNo subreport, only a stored procedure with final two lines are
print @m_sql
exec (@m_sql)
After use generated code in the link above
Error at boReportDocument.VerifyDatabase();
Inner Exception : no error
Message "Logon failed"
ErrorID : CrystalDecisions.CrystalReports.Engine.EngineExceptionErrorID.LogOnFailed
HelpLink : null
stacktrace : CrystalDecisions.CrystalReports.Engine.ReportDocument.VerifyDatabase()\r\n at viewReport.Page_Load(Object sender, EventArgs e) 於 d:
Data
My Documents
Visual Studio 2008
WebSites
Cheques
viewReport.aspx.cs: row 1302\r\n at System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e)\r\n at System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e)\r\n at System.Web.UI.Control.OnLoad(EventArgs e)\r\n at System.Web.UI.Control.LoadRecursive()\r\n 於 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
TargetSite : {Void VerifyDatabase()}
string reportPath = report_path + "ChequeIssueDet.rpt";
boReportDocument = new ReportDocument();
//**EDIT** Change the path and report name to the report you want to change.
boReportDocument.Load(reportPath, OpenReportMethod.OpenReportByTempCopy);
//Create a new Stored Procedure Table to replace the reports current table.
CrystalDecisions.ReportAppServer.DataDefModel.Procedure boTable =
new CrystalDecisions.ReportAppServer.DataDefModel.Procedure();
//boMainPropertyBag: These hold the attributes of the tables ConnectionInfo object
PropertyBag boMainPropertyBag = new PropertyBag();
//boInnerPropertyBag: These hold the attributes for the QE_LogonProperties
//In the main property bag (boMainPropertyBag)
PropertyBag boInnerPropertyBag = new PropertyBag();
//Set the attributes for the boInnerPropertyBag
boInnerPropertyBag.Add("Database", database_name);
boInnerPropertyBag.Add("DSN", "Cheque");
boInnerPropertyBag.Add("UseDSNProperties", "False");
//Set the attributes for the boMainPropertyBag
boMainPropertyBag.Add("Database DLL", "crdb_odbc.dll");
boMainPropertyBag.Add("QE_DatabaseName", database_name);
boMainPropertyBag.Add("QE_DatabaseType", "ODBC (RDO)");
//Add the QE_LogonProperties we set in the boInnerPropertyBag Object
boMainPropertyBag.Add("QE_LogonProperties", boInnerPropertyBag);
boMainPropertyBag.Add("QE_ServerDescription", "Cheque");
boMainPropertyBag.Add("QE_SQLDB", "True");
boMainPropertyBag.Add("SSO Enabled", "False");
//Create a new ConnectionInfo object
CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo boConnectionInfo =
new CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo();
//Pass the database properties to a connection info object
boConnectionInfo.Attributes = boMainPropertyBag;
//Set the connection kind
boConnectionInfo.Kind = CrConnectionInfoKindEnum.crConnectionInfoKindCRQE;
//**EDIT** Set the User Name and Password if required.
boConnectionInfo.UserName = db_username;
boConnectionInfo.Password = db_password;
//Pass the connection information to the table
boTable.ConnectionInfo = boConnectionInfo;
//Get the Database Tables Collection for your report
CrystalDecisions.ReportAppServer.DataDefModel.Tables boTables;
boTables = boReportDocument.ReportClientDocument.DatabaseController.Database.Tables;
//For each table in the report:
// - Set the Table Name properties.
// - Set the table location in the report to use the new modified table
boTable.Name = "sp_ChequeIssueDetRpt;1";
boTable.QualifiedName = database_name+".dbo.sp_ChequeIssueDetRpt;1";
boTable.Alias = "sp_ChequeIssueDetRpt;1";
boReportDocument.ReportClientDocument.DatabaseController.SetTableLocation(boTables[0], boTable);
//Verify the database after adding substituting the new table.
//To ensure that the table updates properly when adding Command tables or Stored Procedures.
boReportDocument.VerifyDatabase();
//**EDIT** Set the value for the Stored Procedure parameters.
string m_curUser = "";
int spid = Convert.ToInt32(Request.Cookies["login_cookie"]["spid"]);
queryString = "select * from v_All_Session where SPID=" + spid.ToString();
//string _connectionString = ConfigurationManager.ConnectionStrings["ChequeConnectionString"].ConnectionString;
using (SqlConnection connection = new SqlConnection(_connectionString))
SqlCommand command = connection.CreateCommand();
command.CommandText = queryString;
connection.Open();
using (SqlDataReader datareader = command.ExecuteReader())
if (datareader.HasRows == true)
while (datareader.Read())
if (datareader["UserID"] != System.DBNull.Value)
m_curUser = datareader["UserID"].ToString();
datareader.Close();
connection.Close();
boReportDocument.SetParameterValue("@UserID", m_curUser);
if (string.IsNullOrEmpty(Session["fm_CoCode"].ToString()))
boReportDocument.SetParameterValue("@fm_CoCode", Session["fm_CoCode"].ToString());
if (string.IsNullOrEmpty(Session["to_CoCode"].ToString()))
boReportDocument.SetParameterValue("@to_CoCode", Session["to_CoCode"].ToString());
if (string.IsNullOrEmpty(Session["fm_BankACNo"].ToString()))
boReportDocument.SetParameterValue("@fm_BankACNo", Session["fm_BankACNo"].ToString());
if (string.IsNullOrEmpty(Session["to_BankACNo"].ToString()))
boReportDocument.SetParameterValue("@to_BankACNo", Session["to_BankACNo"].ToString());
if (string.IsNullOrEmpty(Session["fm_BatchNo"].ToString()))
boReportDocument.SetParameterValue("@fm_BatchNo", Session["fm_BatchNo"].ToString());
if (string.IsNullOrEmpty(Session["to_BatchNo"].ToString()))
boReportDocument.SetParameterValue("@to_BatchNo", Session["to_BatchNo"].ToString());
Edited by: Mathew_666 on Jul 19, 2011 4:27 AM
Edited by: Mathew_666 on Jul 19, 2011 4:28 AM
Maybe you are looking for
-
How to deploy Servlet Application in Weblogic 8.1
Hi, I am new to BEA Weblogic 8.1 . I was trying to create a sample application using InelliJ IDea 5.1 , and IntelliJIdea 10.5 . i configured weblogic with IDE , but now i do not know how to deploy my application in weblogic . I am new in IntelliJ als
-
A few years ago I bought music from Itunes. Recently I deactivated all computers in order to add a new computer. Most of the music I purchased came through, but I am still missing about 30% of it. How can I download all the music I have purchased
-
How to make available certain features available to a particular user group in APEX.
Hi I am trying to make available certain features like (updating/viewing some fields) to a particular set of users. Our requirement is to use SSO for signing in. So when a particular user logs in she/he will be allowed to update or view only certain
-
SQL server Job failed as null values were tried to be inserted.
How can i make my job run without failure by making the stored procedure that the job runs to skip a null value?
-
[BB 9320] Blackberry Screen Reader
Hello. first, sorry for bad english. i've installed the blackberry screen reader on it, and it is very functional, on calls and messaging. However, when i go to the phone book or in phone settings, the Screen reader mess up and start to read only ha