TextEdit attachment question [to PC users]

I added TextEdit to my mothers Dock on her older iMac that runs Panther. I told her to use it if she wants to type something up quickly. I should have also told her that it is to type something up quickly and then quickly print. I should have further told her if it's something she wants to email, to highlight & copy what she typed and then post it into an email.
Regardless, she used TextEdit to type some text that she wanted PC using people to read. She saved the TextEdit file on her Mac and then proceeded to email them the TextEdit file as an attachment. I told her to go back and open the file and copy and paste it into another email to them because I wasn't sure if PC users could open a Mac TextEdit file attachment (which she did).
My question then is: Can PC users open and view a TextEdit file [in an email sent to them] ?

No problems with what she did.
TextEdit saves in either .txt (plain text) or the default .rtf (rich text format) which are very widely compatible.
Text Edit and RTF.
mrtotes

Similar Messages

Erorr while attaching License to a user

Dear All
I get an error while attaching 'LICENSE' to the user.
"XML PARSING FAILED (MESSAGE -60070-33).
I had already attached license to 3 users and it's working fine. But all of a sudden when i am trying to assign license to new users it's giving me this error.
I am using 8.8 ver patch 10
Can anybody help me on this, since this is very urgent
regards
Karthik

Hi Karthik,
configure security in License manager you need to fill in the data.
XML Parsing Failed (Error)
XML Parsing error
Thanks,
Srujal Patel

Funcation module to send attachment file to sap user

hello Friends,
I want to send an external file to sap user when report is run
is ther any funcation module to send attachment file to sap user
plz reply
thanx in adv.
Bhaskar

Check these FMs,
SO_NEW_DOCUMENT_ATT_SEND_API1
SO_DOCUMENT_SEND_API1
SO_WIND_ATTACHMENT_LIST_API1
Thanks and Regards

Is Workflow BOX can be attached to a service user?

Hi All
Please confirm whether Workflow BOX can be attached to a service user?
Actually I am facing problem on this .
The u201CWorkflow Box in VA02 & VA03u201D which is created setting the parameter "SD_SWU_ACTIVE" in the user parameter setting of user thru SU01 is not coming when running TCODE VA02 ,if the user type has been changed to "Service" from "Dialog".
I want confirmation whether technically it is possible or not?
Thanks and regards
Santanu

I remember this one !
Thread: Is there a way to disable change your Initial Password prompt?
links also too :
Error - " Include file in PC application " when attaching in VA02
Full credit to Mylene!!
Edited by: Abhishek Belokar on May 29, 2008 6:01 PM

Attachment complaint from PC users

Hello all,
I have been getting a number of complaints from PC/Outlook users that say when I send them image attachments (.jpegs, .pdf, etc) from my Mac's Mail program (V2.1), that they are unable to download the attachment because it is "in the body of the e-mail" and request that I re-send the image as a "true attachment". I've looked all over Mail and the only function I see for doing this is "Attach File" or click the papaerclip icon labeled "Attach". Sounds simple enough and have always thought that's all I ever needed to do, but these PC people are all over me about it. Any ideas that may be able to help me here?
Thanks in advance,
Scott

You could try single-clicking on the file (that you want to attach/send) in the Finder while holding the control key down, and selecting the "Create archive of {filename}" option in the resulting pop-up menu. That will make a zip file that you can attach and send, that should show up at the distant end as an email attachment, as opposed to being embedded within the message body.
(if this solves your problem, or is helpful towards arriving at a solution to your problem, please consider marking this reply as "helpful" or "solved" in addition to marking this question as "answered")

Questions about forms users once the form is completed

I am on a Macintosh platform, OX 10.5 (Leopard), using Adobe Acrobat Professional that came with CS3 (version 8 I believe - I am not in front of that computer at the moment). I have creted a few forms in LifeCycle, but now my boss wants this to be completely Mac so Monday I need to start creating them in a Mac. I know the basics of how to create a form from a pdf file.
Here are my questions:
1 - Acrobat 8 is so old I can't find any help information in the Adobe help section. Everything that says version 8 takes me to X or XI when I click on the link. Does anyone know where I might find some help with this version?
2 - How do I create a form that the person using can save with the data, the completed fields, so they can open it again and look at what they filled in?
3 - As a corrollary to number 2, how can we also get the data?
4 - We want to take a booklet that has been paper up to now, create a pdf, and then number them to sell for one use only. Is there any way to make a form one-time-use only, so it can't be passed on to someone else to also complete?
I appreciate any help I can get. Thank you.

2. You need to apply the Extended Reader Rights. In version 8 I believe it was under the Advanced menu.
3. The users can submit the file back to you in various formats, such as PDF (the entire file), FDF, XML, etc.
You can add a submit button to the file that will help them do that, or they can just do it themselves.
4. Impossible, unless you use some kind of DRM technology, but those are extremely expensive.

Attachment to _Attach_Objects in user dicision step

hi friends
I need to attach the PDF to my work item (user dicision step). I know this has been discussed many times. I have read all most all the forms. I am still facing the problem. I have function module ZPDF which converts smart form into PDF and putting the PDF in my BINFILE of type SOLIX. Now i need to attach this BINFILE to my user dicision AttachObjects. In my method am calling ZPDF in my OBJECT ZBUS2089 method wiattachment. I know SOFM instance to be created. But how to create the SOFM INSTANCE?. i used this syntax
DATA : ls_sofm_key type SWOTOBJID-OBJKEY.
DATA: lr_sofm TYPE swc_object.
SWC_CREATE_OBJECT lr_sofm 'SOFM' ls_sofm_key.
CALL METHOD t_container->if_swf_ifs_parameter_container~set
EXPORTING
name = 'Attachments'
value = lr_sofm
IMPORTING
returncode = ls_subrc.
Its showing the error t_container is not know there is similiar name container.
So i changed t_container to container.
But its show there is no reference. what i need to do now.how to get the reference.
IF this is not the correct way to proceed then tell me the write way to use.
My ultimate aim to fill my workflow container with Attachment of type SOFM and in the binding
attachment --> AttachObject.
I want to fill my WF container with SOFM instance.
Regards
vijay

Hi pavan
In my method i have written the code has above i have created attribute with SOFM with type SOFM. But i when i debug it comes excatly to the last line and giving me a dump.
   IF lv_return = 0.
        lv_objtkey = lv_att_id.
        lv_objsofm = 'SOFM'.
        swc_create_object bo_sofm lv_objsofm lv_objtkey.
SWC_SET_ELEMENT CONTAINER 'LV_ATT_ID' LV_ATT_ID.
SWC_SET_ELEMENT CONTAINER 'SOFM' lv_objtkey.
      ENDIF.
i have put this container element inside the if statement. I am getting a dump.
Dump.
Short text
    Data objects in Unicode programs cannot be converted.
Error analysis
    The statement
       "MOVE src TO dst"
    requires that the operands "dst" and "src" are convertible.
    Since this statement is in a Unicode program, the special conversion
    rules for Unicode programs apply.
DATA abapfield_type.
IF container-type CO 'DT'.
    ASSIGN container-value(container-elemlength) TO <swc_cont>
           TYPE container-type.
    DESCRIBE FIELD abapfield TYPE abapfield_type.
    IF abapfield_type = 'C'.
       IF container-type = 'D'.
         WRITE <swc_cont> TO abapfield DD/MM/YYYY.
       ELSE.
         WRITE <swc_cont> TO abapfield USING EDIT MASK '__:__:__'.
       ENDIF.
    ELSE.
       abapfield = <swc_cont>.
    ENDIF.
ELSEIF container-type = swc_type_key.
    PERFORM move_key USING    container-element container-value
                     CHANGING abapfield.
ELSEIF container-type = swc_type_handle.
    PERFORM move_handle USING    container-element container-value
                        CHANGING abapfield.
ELSEIF container-type = swc_type_structure.
     PERFORM move_structure TABLES   container
                            CHANGING abapfield index tabindex.
ELSEIF container-type = 'X' AND container-elemlength > 127.
    FIELD-SYMBOLS: <ptr_x> TYPE x.
    ASSIGN container-value TO <ptr_x> CASTING.
    abapfield = <ptr_x>.
ELSE.
    ASSIGN container-value TO <swc_cont>.
>    abapfield = <swc_cont>.                      " here its dump
ENDIF.
Regards
vijay

EXCEL attachment as EMAIL to USER - When USER executes REPORT in BACKGROUND

Hi Friends,
I have 10 records in Internal Table. In BACK GROUND execution, I have to send this 10 records as EXCEL attachment through EMAIL to the USER who executed in background.
How to do this? Thanks in advance.
Regards,
Viji.

hi,
the following excerpt converts to excel:
REPORT ZEX_DATATOEXCEL .
Parameters: P_file like RLGRAP-FILENAME.
data : begin of int_head occurs 0,
Filed1(20) type c, " Header Data
end of int_head.
data : begin of int_data occurs 0,
Field1(20) type c, " Data
Field2(20) type c,
Field3(20) type c,
Field4(20) type c,
end of int_data.
int_head-Filed1 = 'Sales Ord'.
APPEND int_head.
CLEAR int_head.
int_head-Filed1 = 'Sold-to-Party'.
APPEND int_head.
CLEAR int_head.
int_head-Filed1 = 'Purchase Ord'.
APPEND int_head.
CLEAR int_head.
int_head-Filed1 = 'Ship-to-Party'.
APPEND int_head.
CLEAR int_head.
int_data-field1 = '1JOHN'.
int_data-field2 = '2TOM'.
int_data-field3 = '3BRAD'.
int_data-field4 = '4PETER'.
Append int_data.
Clear int_data.
CALL FUNCTION 'MS_EXCEL_OLE_STANDARD_DAT'
EXPORTING
file_name = p_file " path offile where u need to download
* CREATE_PIVOT = 0
* DATA_SHEET_NAME = ' '
* PIVOT_SHEET_NAME = ' '
* PASSWORD = ' '
* PASSWORD_OPTION = 0
TABLES
* PIVOT_FIELD_TAB =
data_tab = int_data "internal table with data
fieldnames = int_head "internal table with header
EXCEPTIONS
file_not_exist = 1
filename_expected = 2
communication_error = 3
ole_object_method_error = 4
ole_object_property_error = 5
invalid_filename = 6
invalid_pivot_fields = 7
download_problem = 8
OTHERS = 9
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
got it from
http://abaplovers.blogspot.com/2008/05/abap-internal-table-to-excel-sheet.html.
then you can export to spool and mail it.
ags.

Mail attachement more than 5KB user is unable to receive

Hi All
We are trying to send the mail from SAP to Lotus notes with attachment, if more than 5KB user is unable to receive attached
mail, at the same time user is able to receive the mail if less the 5KB of SIZE.
where we need to change the setup to allow more than 5KB of Attachment mail from SAP.
Please help us to reslove the above issue.

Hi Matt Kangas
we have checked the mail server there is no issue in the SMTP Mail server as well as there is no restriction in SMTP Level.
Please clarify.
Regards
Edited by: Krishguna on Nov 18, 2009 6:35 PM

SOAP Attachment question

Hi!
I've got a question about SOAP Attachment. It is possible to use "Datahandler" class to attach a file. But is it possible to put the datahandler in a business class ( as an attribute of the class), and the business class is a parameter of the service?
Thank you for your help!
Best Regards,
Nguyen Gilbert

I tried making the DataHandler object as a attribute of the parameter object and there were some exceptions. I think weblogic does not allow that.

[SOLVED] Question about systemd-user-session

Hi!
I'm trying to setup a systemd --user session (using user-session-units and xorg-launch-helper from aur).
I have a couple of questions; this is my .xinitrc now:
#!/bin/bash
export BROWSER=chromium
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
spacefm --desktop &
compton -cGCf -m 0.9 -i 0.8 -D 5 --shadow-exclude 'g:e:Conky' &
volumeicon &
/home/federico/Script/touchpadoff_onboot.sh &
#connman-ui-gtk &
/home/federico/Script/calised-script &
dimdaemon &
tint2 -c .config/tint2/dragonauta.tint2rc &
conky -p 5 -c Script/conky.conf &
exec openbox
1) is "if" statement required when using systemd-user-session? And if yes, how can I reproduce it?
2) "conky -p 5 " will wait 5 seconds doing nothing. Will this mean that other .service will wait for it to finish? (i guess no, since they're executed in parallel).
3) how can I export "chromium" as my default browser?
Thank you very much!
Last edited by nierro (2013-04-06 17:56:17)

I followed everything in that wiki, and in KaiSforza and sofar github page.
I finally managed to get my old method (autologin to vt and autostart x) to work together with systemd --user: i put in .xinitrc "systemd --user" and deleted everything else.
So, my .config/systemd/user/ works. The problem is in the [email protected], i guess. I configured it like wiki says, mind to post here your /etc/systemd/system/[email protected]?
Thanks.
EDIT: here it is my [email protected]:
# This file is part of systemd.
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
[Unit]
Description=User Manager for %I
After=systemd-user-sessions.service
# This is needed for folks running Xorg on vt/1
Conflicts=[email protected]
[Service]
User=%I
PAMName=login
# Note memory:/ required kernel memory CGroups support
ControlGroup=%R/user/%I/shared cpu:/ memory:/
ControlGroupModify=yes
Type=notify
TTYPath=/dev/tty1
ExecStart=-/usr/lib/systemd/systemd --user
Environment=DISPLAY=:0
Environment=XDG_RUNTIME_DIR=/run/user/%U
Environment=DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/%U/dbus/user_bus_socket
[Install]
WantedBy=getty.target
and loginctl says my user has "1000" as UID.
Last edited by nierro (2013-04-05 16:13:14)

Question re: syncing User Accounts between 2 machines wirelessly. Possible?

I'm soon to take delivery of a 24" iMac and I plan to have 2 User accounts on there for myself and my partner. My partner also has a G4 iBook.
My question is, is there anyway that my partner can sync her account (documents and settings) on her iBook with her account on the iMac? ie. if she starts a Word document on one machine, then moves to the other machine and syncs, can she continue to edit the document, and vice versa?
Is there something in OS X or third party that would facilitate this?
Any advice much appreciated.
Neil

We do use portable accounts. This is so that we don't tie up the network letting users work directly from their network accounts. We also need to have the ability of our users to work at different computers, but still get access to their own stuff. We have it set up so that when a user logs onto another computer for the first time, he is asked if he wishes to create a portable home directory. We have them answer "yes". I think at that time it then brings down from their network account all their files and settings so that the new computer will look like any other computer that they already have worked at. This appears to creat what is called a mobile account on the computer. We also have syncing set up to sync at login and logout. This, hopefully will sync up their network directory to any changes made at different computers and thus make those changes appear on any other computer that they work at. Sometimes the user gets a message that their network account has changed since last logon and ask if they wish to sync to their network account or their local account. We normally tell them to sync to their network account, assuming that it has the newest changes. None of our users ever work offline from our network so their network account should always be the most recent version of any files. This is assuming that the syncing is working properly. Does this make any sense? Does it sound like we are doing this properly or is there a better, more efficient procedure?

ISE DNS Question For Guest Users

Before I ask the question, let me explain our environment.
We have an internal 5508 controller. We also have a 5508 DMZ controller that acts as an anchor controller. Guest traffic is piped to the DMZ controller which provides the DHCP address, and DNS server information. The DNS that we provide is our ISP provider DNS server information, to our guest wireless users. There's no need to provide them with our internal DNS server information, since they're only going to the internet.
Here's my dilema. We are now implementing the ISE appliances so that we can better control our guest users. Currently, our guest SSID is wide open. With the ISE, we're going to initially only do self-registration for guest users. They will connect to our broadcasted SSID, when they connect to it, they will be presented with the guest portal. There will be a link that allows them to go to a self-registration page. The dilema is that the ISE appliances are a part of our internal 10.x.x.x network. Since the guest users will have our ISP's DNS servers, our ISE devices will not be able to be found for the redirection to the portal.
Would anyone have any suggestions on this? I don't want to advertise our internal DNS servers to guest users. Thanks for any help!

I haven't tried this before but ISE does actually allow you to assign physical ports to the Guest HTTP portal. You can see this under Administration > Web Portal Management > General > Ports. Perhaps you can:
1. Take a physical port from your appliance and connect it to the DMZ
3. Give it an IP address that is resolvable from the public DNS server
3. Assign that physical port only to the guest HTTP service
On the other hand, you could also build a DNS server just for the guest users and stick in the DMZ :)
Not sure if this helps but just some food for thought.
Thank you for rating helpful posts!

Attachment Tab for first user?

Is it possible to display the attachment tab for the first user(before initiate a process) in the task manager?
I mean, when I try open the form from the category (through Start Process icon), it does not display the attachment tab.
any suggessions?
Thanks in advance,
Nith

your contribution to this forum is much appreciated..
Many thanks for you...
Nith

OSB question : passing a user defined transport header to a proxy service

Hi All,
I have a proxy service that calls another proxy service. The protocol for the "called proxy service" is set to local. The calling proxy service has a "transport header" action to add a user defined header to the outbound request.
I log the outbound request in the calling proxy service before publishing/calling the other proxy service. It does have header set as expected. But the called proxy service does not get this header.
As a note in the "transport" tab "get all headers" is set to true.
Please suggest
Here is the outbound xml gets printed just before calling the proxy service
<con:endpoint name="BusinessService$userProvisioning$businessService$HttpMessageSender" xmlns:con="http://www.bea.com/wli/sb/context">
<con:service/>
<con:transport>
<con:uri>http://localhost:8064/ProvisioningService/</con:uri>
<con:mode>request-response</con:mode>
<con:qualityOfService>best-effort</con:qualityOfService>
<con:request xsi:type="http:HttpRequestMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<tran:user-header name="JMS_BEA_RedeliveryLimit" value="1"/>
<tran:user-header name="JMSDeliveryMode" value="2"/>
<tran:user-header name="JMSExpiration" value="0"/>
<tran:user-header name="JMSMessageID" value="ID:<914937.1294164899050.0>"/>
<tran:user-header name="JMSPriority" value="4"/>
<tran:user-header name="JMSRedelivered" value="false"/>
<tran:user-header name="JMSTimestamp" value="1294164899050"/>
<tran:user-header name="JMSXDeliveryCount" value="1"/>
*<tran:user-header name="reResolvedAddress" value="http://LPF004689:8080/axis2/services/provisioning/"/>*
*<tran:user-header name="reResolvedRegion" value="MB"/>*
<http:Content-Type>application/soap+xml; charset=utf-8</http:Content-Type>
</tran:headers>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
</con:request>
</con:transport>
<con:security>
<con:doOutboundWss>false</con:doOutboundWss>
</con:security>
</con:endpoint>>
And here is the inbound xml getting printed inside the called proxy service
inbound="<con:endpoint name="ProxyService$userProvisioning$proxyService$LocalSoapListener" xmlns:con="http://www.bea.com/wli/sb/context">
<con:service/>
<con:transport>
<con:mode>request-response</con:mode>
<con:qualityOfService>best-effort</con:qualityOfService>
<con:request xsi:type="loc:LocalRequestMetaData" xmlns:loc="http://www.bea.com/wli/sb/transports/local" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="loc:LocalRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports"/>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
</con:request>
<con:response xsi:type="loc:LocalResponseMetaData" xmlns:loc="http://www.bea.com/wli/sb/transports/local" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="loc:LocalResponseHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports"/>
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">0</tran:response-code>
</con:response>
</con:transport>
<con:security>
<con:transportClient>
<con:username><anonymous></con:username>
</con:transportClient>
</con:security>
</con:endpoint>"

Hi,
We are using OSB 11g for sending message to external client.
we are setting Headers "JMSType" in set Transport Header. but Client is not able to recieve the JMSType header at there side.
we have read many forums for the same and turned on
Pass all Headers through Pipeline
Get All Headers
then I put one publish action and keep my "Set Transport Header" inside that. still client is not able to find the same
In out outbound request we can see the header as following.
$outbound = <con:endpoint name="BusinessService$Notification$BusinessService$external$BUSINESSSERVICE:con="http://www.bea.com/wli/sb/context">
<con:service/>
<con:transport>
<con:uri></con:uri>
<con:mode>request</con:mode>
<con:qualityOfService>exactly-once</con:qualityOfService>
<con:request xsi:type="http:HttpRequestMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<tran:user-header name="JMSType" value="XXXXXXX">
<http:Content-Type>text/plain; charset=utf-8</http:Content-Type>
</tran:headers>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
</con:request>
<con:response xsi:type="http:HttpResponseMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpResponseHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<tran:user-header name="content-description" value="SOAP"/>
<tran:user-header name="content-disposition" value="attachment;filename="[email protected]""/>
<tran:user-header name="content-id" value="<[email protected]>"/>
<http:Cache-Control>proxy-revalidate</http:Cache-Control>
<http:Connection>Keep-Alive</http:Connection>
<http:Content-Length>112</http:Content-Length>
<http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
<http:Date>Sun, 02 Sep 2012 04:06:43 GMT</http:Date>
<http:Server>XXXXXXXXXerver>
<http:Set-Cookie><![CDATA[<cookie-values xmlns="http://www.bea.com/wli/sb/transports/http">
<value>JSESSIONID=m2RvGs2_Lvk_AZgyVJIv_e2-vSiFOQFi_mIA_SAPULGAKriCp_hbBD8uC0e8pEXt; Version=1; Path=/</value>
<value>saplb_*=(spspiq_PIQ_00)6487650; Version=1; Path=/</value>
</cookie-values>]]></http:Set-Cookie>
</tran:headers>
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">0</tran:response-code>
<tran:response-message xmlns:tran="http://www.bea.com/wli/sb/transports">OK</tran:response-message>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
<http:http-response-code>200</http:http-response-code>
</con:response>
</con:transport>
<con:security>
<con:doOutboundWss>false</con:doOutboundWss>
</con:security>
</con:endpoint>

TextEdit attachment question [to PC users]

Similar Messages

Maybe you are looking for