Textfields iOS not updated when the XML allready is updated

Hi,
I am testing an app for iOS and later on also for Android. I am using an XML from PHP with and also without a MySQL database.
In one case I only use the current date to be published in the app in a textfield. Problem is that to get all ML connected textfields updated even when the XML allready is updated I have to completely restart the iPod Touch which I use to test on. Is there a way that the user is able to push a button to manually update the app without closing down the device? In addition, is there away that the app automaticaly refreshes its content?
Any help is greatly appreciated.

Took me some time to find out why I didn't succeed.
I finally succeeded in the way kglad suggested.
Problem was that when you close the app and later on open it the information for example a date/time through php/xml doesnot change.
That is untill you click something.
So my test with just the date didnot seem to change anything.
But when I hit a button to another frame and send it back
The date/time are updated.
Thanks kglad for pointing me in the right direction.

Similar Messages

IOS 6.0.1 update is not showing when I'm trying to update from iphone4(Software update tab)

Im Using Iphone 4 with IOS 6 and when I'm trying to update it to IOS 6.0.1 from iphone(Software update tab), It says the software iOS 6.0 software is upto date.Please help

Yea I tried that first but when you update it through iTunes the IOS update is like 888mb were via iphone its 70mb.Why Im not able to update via iphone it worked fine last time when I updated to iOS 6.I want to update via AIR any help

TS1410 My iPod shuffle ( 1st or 2nd generation) will not recharge and does not show when the doc is connected to my MacBook Pro. I'm running the latest updated version of iTunes.

My iPod shuffle ( 1st or 2nd generation) will not recharge and does not show when the doc is connected to my MacBook Pro. I'm running the latest updated version of iTunes.

Hello Jane Benstock,
Thank you for using Apple Support Communities
It sounds like the next best step to take would be to reset the iPod Shuffle.
Check out this article named Resetting iPod shuffle found here http://support.apple.com/kb/HT1655.
All the best,
Sterling

Hey ! I have a problem with my iphone 5s IOS 8 , my notification center does not scan when the screen is locked

hey !
I have a problem with my iphone 5s IOS 8 , my notification center does not scan when the screen is locked

sounds like a hardware failure. Return the phone to Apple.

Why is the decline button for phone calls not available when the phone is locked? I need that button and it shows only when the phone is not locked on iOS 7

Why is the decline button for phone calls not available when the phone is locked? I need that button and it shows only when the phone is not locked on iOS 7

Yep. You need to touch the sleep/power button once to silence the ring, and twice in order for the call to go directly to Voicemail.
Personally, I dont understand why Apple eliminated this. If you wish to give Apple feedback, do it here:
www.apple.com/feedback

[SOLVED]Gnome 3.4 is not suspending when the lid is closed.

Hey..
Since upgrading to gnome 3.4.1, my laptop does not suspend when the lid is closed.
I have read this this thread without getting a clear answer...
I have checked the setting in gnome tweak tool, and they are both set to "Suspend"
The laptop has no problem suspending, if i run the command, or choose the option in the menu to the right.
Is this a bug ?
What can i do to fix it. ?
Last edited by Munken (2012-06-20 05:54:08)

See this thread for updates on the problem.

Got error: Location Code is not enabled in the XML Gateway Server

Hi,
When I perform Compliance rule screening on GTM - Globel Trade Management,that I defined GTM as an Trading Partner on EBS R12.1.3,
GTM can send response to EBS,but I see the following error message via Transaction Monitor on EBS workflow:
[The Standard:OAG, Transaction Type:ITM , Transaction SubType:EXPORT_COMPLIANCE and Location Code GTM6.2 is not enabled in the XML Gateway Server. Pls check your Setup.]
On EBS,I defined an ITM Partner for GTM,named 'GTM6.2',according to the document created by you: ITM Setup.doc
and I also finished the following steps:
1. ITM Application Users
2.ITM Partner Service Types
3.ITM Parameter Setup
4.Order Type Creation: ITM Only
5.Customer Creation: create a customer named 'GTM6.2', also enter 'GTM6.2' as EDI Location
6.Define Transactions on XML Gateway as following:
<Header>:
Party Type: Customer
Transaction Type: ITM
Transaction Sub Type: EXPORT_COMPLIANCE
<External Transactions (Lines)>:
Standard Code: OAG
External Transaction Type: ITM
External Transaction Sub Type: EXPORT_COMPLAINCE
Queue: APPLSYS.ECX_IN_OAG_Q
7.Define Trading Partners on XML Gateway as following:
<Header>:
Trading Partner Type: Customer
Trading Partner Name: GTM6.2
<Trading Partner Details>:
Transaction Type: ITM
External Transaction Type: ITM
External Transaction Sub Type: EXPORT_COMPLAINCE
Map: WSHITEIN
Source Trading Partner Location Code: GTM6.2 (same as the value what defined in EDI Location for customer)
I think the combination of External Transaction Type, External Transaction Subtype, Standard Code,Source Trading Partner Location Code
should be existing once done above steps, I have no idea why the error prompted.
Does someone can tell how to trace the error?
Thanks,
Rambler

user12254038 wrote:
Can you send any supporting documents on ITM Setup? My client is implementing ITM for the first time and I wanted to know more details on how it works in R12.1.3 version of EBS?Oracle International Trade Management (ITM) Partner Integration: Specifications [ID 572524.1]
International Trade Management Integration [ID 259691.1]
How Can I Tell if International Trade Management is Installed or Not? [ID 742539.1]
What are the Required Setups for International Trade Management (ITM) Flows in Shipping Execution? [ID 782861.1]
What Patches Provide the Latest Fixes and Enhancements for ITM Adapter? [ID 465122.1]
How to Generate Debug Information From ITM Adapter for XML Processing [ID 738925.1]
How to Generate Debug File for International Trade Management (ITM) [ID 1294853.1]
Thanks,
Hussein

Junitreport 'redirect' is not allowed when the secure processing feature is set to true.

junitreport 'redirect' is not allowed when the secure processing feature is set to true.
Hello,
   I'm running flexunit4.1.0-8 and I have an ant script running the test suite.    I recently upgraded from FB 4 to 4.5 and now I'm getting
failures on junitreports. Here's the full error:
[junitreport] : Error! Use of the extension element 'redirect' is not allowed when the secure processing feature is set to true.
[junitreport] Failed to process C:\TDMSE_2_6\tdmse\flex-test\flex_unit_reports\TESTS-TestSuites.xml
BUILD FAILED
C:\TDMSE_2_6\tdmse\build\flexunitbuild.xml:116: Errors while applying transformations: javax.xml.transform.TransformerException: java.lang.RuntimeException: Use of the extension element 'redirect' is not allowed when the secure processing feature is set to true.
Here's the junitreport section:
[code]
<target name="flex-unit-execute-tdmse-test-runner"
                              description="executes the test runner app">
          <flexunit swf="${FLEX_UNIT_TEST_HOME}/TDMSETestRunner.swf"
                              toDir="${FLEX_UNIT_REPORTS_HOME}"
                              haltonfailure="false"
                              localTrusted="true"
                              verbose="true"
                              headless="false"/>
          <junitreport todir="${FLEX_UNIT_REPORTS_HOME}">
                    <fileset dir="${FLEX_UNIT_REPORTS_HOME}">
                              <include name="Test-*.xml"/>
                    </fileset>
                    <report format="frames" todir="${FLEX_UNIT_REPORTS_HOME}/html"/>
          </junitreport>
</target>
[/code]
And here's the full ant build:
[code]
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE project>

          
<project name="flexunitbuild" basedir="." default="flex-unit-start-test-runner">
          <tstamp>
                    <format property="build.date" pattern="MMMMM dd, yyyy" />
                    <format property="build.time" pattern="HH:mm:ss" />
          </tstamp>
          <property name="tdmsedir" value="${basedir}/.." />
          <property name="builddir" value="${tdmsedir}/../build" />
          <property name="FLEX_HOME" value="${builddir}/tools/flex-4.5.0" />
          <property name="PARSLEY_HOME" value="${builddir}/tools/parsley-2.4.0" />
          <property name="FLEX_UNIT_HOME" value="${tdmsedir}/flex-test" />
          <property name="FLEX_UNIT_LIBS_HOME" value="${builddir}/tools/flexunit-4.1.0-8" />
          <property name="FLEX_UNIT_REPORTS_HOME" value="${FLEX_UNIT_HOME}/flex_unit_reports" />
          <property name="FLEX_UNIT_TEST_HOME" value="${FLEX_UNIT_HOME}/flex_unit_tests" />
          
          <taskdef resource="flexTasks.tasks" classpath="${FLEX_HOME}/ant/lib/flexTasks.jar"/>
          <taskdef resource="flexUnitTasks.tasks" classpath="${FLEX_UNIT_LIBS_HOME}/flexUnitTasks-4.1.0-8.jar" />
          
          <echo>basedir: ${basedir}</echo>
          <echo>tdmsedir: ${tdmsedir}</echo>
          <echo>builddir: ${builddir}</echo>
          <echo>FLEX_HOME: ${FLEX_HOME}</echo>
          <echo>FLEX_UNIT_HOME: ${FLEX_UNIT_HOME}</echo>
          <echo>FLEX_UNIT_LIBS_HOME: ${FLEX_UNIT_LIBS_HOME}</echo>
          <echo>FLEX_UNIT_REPORTS_HOME: ${FLEX_UNIT_REPORTS_HOME}</echo>
          
          <target name="flex-unit-start-test-runner"
                              description="clean, compile and run tdmse flexunit tests"
                              depends="flex-unit-clean-tdmse-tests,
                              flex-unit-tdmse-compile-test-suite,
                              flex-unit-execute-tdmse-test-runner"/>
          <target name="flex-unit-clean-tdmse-tests" description="Cleans the FlexUnit test and reports directories">
                    <delete dir="${FLEX_UNIT_REPORTS_HOME}" failOnError="false"
                                        includeEmptyDirs="true" />
                    <mkdir dir="${FLEX_UNIT_REPORTS_HOME}" />
                    <delete dir="${FLEX_UNIT_TEST_HOME}" failOnError="false"
                                        includeEmptyDirs="true" />
                    <mkdir dir="${FLEX_UNIT_TEST_HOME}" />
          </target>
          <target name="flex-unit-tdmse-compile-test-suite">
                    <mxmlc file="${tdmsedir}/flex-src/TDMSETestRunner.mxml"
                                        output="${FLEX_UNIT_TEST_HOME}/TDMSETestRunner.swf">
                              <load-config filename="${FLEX_HOME}/frameworks/flex-config.xml"/>
                              
            <locale>en_US</locale>
            <source-path path-element="${tdmsedir}/flex-src/locale/{locale}" />
            <include-resource-bundles>COMMON</include-resource-bundles>
            <include-resource-bundles>OW</include-resource-bundles>
            <include-resource-bundles>PREF</include-resource-bundles>
            <include-resource-bundles>RD</include-resource-bundles>
            <include-resource-bundles>RG</include-resource-bundles>
                              
                              <compiler.library-path dir="${PARSLEY_HOME}" append="true">
                                        <include name="parsley-flex4-2.4.0.swc" />
                                        <include name="spicelib-flex-2.4.0.swc" />
                              </compiler.library-path>
                              
                              <source-path path-element="${tdmsedir}/flex-src" />
                              <source-path path-element="${tdmsedir}/flex-test" />
                              
                              <compiler.library-path dir="${FLEX_UNIT_LIBS_HOME}" append="true">
                                        <include name="*.swc"/>
                              </compiler.library-path>
                              
                              <compiler.library-path dir="${FLEX_UNIT_LIBS_HOME}/mocklibs" append="true">
                                        <include name="*.swc"/>
                              </compiler.library-path>
                              <compiler.verbose-stacktraces>true</compiler.verbose-stacktraces>
                              <compiler.headless-server>true</compiler.headless-server>
                    </mxmlc>
          </target>
          <target name="flex-unit-execute-tdmse-test-runner"
                                        description="executes the test runner app">
                    <flexunit swf="${FLEX_UNIT_TEST_HOME}/TDMSETestRunner.swf"
                                        toDir="${FLEX_UNIT_REPORTS_HOME}"
                                        haltonfailure="false"
                                        localTrusted="true"
                                        verbose="true"
                                        headless="false"/>
                    <junitreport todir="${FLEX_UNIT_REPORTS_HOME}">
                              <fileset dir="${FLEX_UNIT_REPORTS_HOME}">
                                        <include name="Test-*.xml"/>
                              </fileset>
                              <report format="frames" todir="${FLEX_UNIT_REPORTS_HOME}/html"/>
                    </junitreport>
          </target>
          
</project>
[/code]
I haven't seen much info about this problem anywhere on google except for this forum post:
http://forums.adobe.com/thread/740146
Thanks for any help!

If you include the xalan.jar library to the build.xml execution classpath everything works!!!!!!.
I hope it will be userfull.

I have CS 6 installed on a Win 7 OS machine. I can not connect to the internet to get updates from within the program. How do I fix this?

I have CS 6 installed on a Win 7 OS machine. I can not connect to the internet to get updates from within the program. How do I fix this?

IP routing doesn't work the way many folks might initially think it does; functional IP routing requires manual configuration and the establishment of static routes and default routes specific to the local network configurations, and it's very easy to get it wrong, or to get the default route swapped. Multiple NIC boxes don't magically work, either. (Been there, done that, wondered what happened to my network when the paths got reordered or my route settings were messed up, etc.)
Routing configuration errors can be quite subtle, too. (Again, voice of experience. Ever had a thousand-seat office LAN accidentally routing through your desktop? As the, um, unnamed guilty party discovered, getting into that configuration was subtle. Seeing the performance crater on the fellow's box and on the LAN was obvious.)
Knowing how IP routing works is a prerequisite to getting this configuration to work; there's manual configuration required. Clearly something has gone weird here.
What to do? Read up on IP routing. I'll again suggest the threads and the manual mentioned earlier.
And in general, I prefer to avoid using my comparatively expensive Mac boxes as sub-optimal IP routers or as firewall boxes. General-purpose operating systems and generic x86 boxes are going to be inherently poor IP routers. Dedicated routers (or embedded or surplus x86 boxes with routing software loaded) offload the Mac boxes here, and are also typically easier to configure manage. And "real" IP routers can have hardware specific to efficiently routing packets. Use of an outboard firewall or firewall-router box also greatly simplifies gateway routing, too; it's a configuration that many folks and many businesses tend to use.

Graph does not autoscale when it's value is updated in a subvi and Defer Panel Updates is on

Hello,
I have a main VI containing several xy grpahs, which I update from a sub vi. In order to cut down on front panel redraws I defer panel updates while the graph values are updated and then redraw the FP after this has been done. However when I do this the graphs do not autoscale properly. I've attached two vi's as an example. Run the Main vi, if the Defer Panel Updates boolean is false then everything works fine, if it is true then the graph does not autoscale.
I have found a previous post that mentions something similar (here). Has this been fixed or is there a work around.
I'm using LV 8.5
Thanks
David
Attachments:
Main3.vi ‏22 KB
Sub1.vi ‏14 KB

Hi Matthew,
Thanks for your reply, it fixed the problem. However it has thrown up a different but related issue.
In my application the user can select how many graphs to display and I
programmatically calculate the size and position of each graph. If any
of the graphs overlap, even slightly, and defer panel updates is on
then only the topmost graph autoscales correctly, the others don't at
all, although the data they display gets updated. Turning autoscale off
and on again for a particular graph rescales that graph, presumably
because it has been forced to.
I have attached a test case with 4 graphs. The size and position of the
graphs are set by the 'Offsets' cluster. Click 'Rearrange' to get it to
recalcute the positions. If you change the Vertical Gap or Horizontal
Gap values to 0 or negative then the graphs will overlap. With Defer
Panel Updates off there is no problem. With it on only the topmost
graph updates properly.
My current workaround is to ensure the graphs don't overlap, but I'm guessing they shouldn't be doing this anyway.
David
Attachments:
PositionsCalculator.vi ‏19 KB
Main21.vi ‏50 KB
Plot.vi ‏22 KB

WRT54g v3 firmware update when the power was interrupted.

I have a WRT54G v3 modem. firmware update when the power was interrupted. now is access the router's web-based setup page not open and power led are flashing. DMZ led 5 seconds are flashing.
Help me please!

As the power light on the router is flashing,it means the firmware of the router is corrupted...Try this link and try to re-flash the firmware once again....Once done,reset the router for 30 seconds,power cycle the router and check..

ORA-19201: Datatype not supported when validating XML against an XSD

Hello.
Info: using Oracle 10.2.0.1.0, Java components are installed.
I've created an XML view using ora:view, which is validated against a registered XSD. This view is created successfully.
But when I SELECT * from this view, it gives ORA-19201 - Datatype not supported.
Can't understand why. I've matched the XML to the XSD, and the datatypes all look fine to me. I've referred to the XSD using the XMLFORMAT.CREATEFORMAT option. When I use the same option to specify "NO_SCHEMA", it returns the correct XML, but we need to validate it against the XSD.
I'm thinking one of two things has happened here:
1. I've made a mistake with either my registration, or how I've used XMLFORMAT to refer to the XSD.
2. There's a bug in Oracle.
My money's on 1. Can anyone help?
Thanks,
Ray.

Hello Geoff, I didn't want to send any code until I knew someone was willing to look at it (there's a lot of it).
Here is the XSD:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>

<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified">
     <xs:element name="TransInfo">
          <xs:complexType>
               <xs:sequence>
                    <xs:element name="PIE_ERROR" type="PIE_ERRORType" minOccurs="0"/>
                    <xs:element name="Transaction" type="TransactionType" maxOccurs="unbounded"/>
               </xs:sequence>
          </xs:complexType>
     </xs:element>
     <xs:complexType name="PIE_ERRORType">
          <xs:sequence>
               <xs:element ref="ERROR_CODE"/>
               <xs:element ref="DESCRIPTION"/>
          </xs:sequence>
     </xs:complexType>
     <xs:element name="ERROR_CODE">
          <xs:simpleType>
               <xs:restriction base="xs:string">
                    <xs:enumeration value="0001"/>
               </xs:restriction>
          </xs:simpleType>
     </xs:element>
     <xs:element name="DESCRIPTION">
          <xs:simpleType>
               <xs:restriction base="xs:string">
                    <xs:enumeration value="LEAD NUMBER 12345 IS INVALID"/>
               </xs:restriction>
          </xs:simpleType>
     </xs:element>
     <xs:complexType name="TransactionType">
          <xs:sequence>
               <xs:element ref="TRANSACTION_NUMBER"/>
               <xs:element ref="TRANSACTION_STATUS"/>
<xs:element ref="CONTACT_ID"/>
               <xs:element ref="INVOICE_NUMBER"/>
               <xs:element ref="CHANNEL"/>
               <xs:element ref="CSA"/>
               <xs:element ref="OPEN_DATETIME"/>
               <xs:element ref="CLOSED_DATETIME"/>
               <xs:element name="Orderline" type="OrderlineType" maxOccurs="unbounded"/>
          </xs:sequence>
     </xs:complexType>
     <xs:element name="TRANSACTION_NUMBER">
          <xs:simpleType>
               <xs:restriction base="xs:int">
                    <xs:enumeration value="3455229"/>
                    <xs:enumeration value="3455230"/>
               </xs:restriction>
          </xs:simpleType>
     </xs:element>
     <xs:element name="TRANSACTION_STATUS">
          <xs:simpleType>
               <xs:restriction base="xs:string">
                    <xs:enumeration value="C"/>
               </xs:restriction>
          </xs:simpleType>
     </xs:element>
     <xs:element name="CONTACT_ID">
          <xs:simpleType>
               <xs:restriction base="xs:int">
                    <xs:enumeration value="111"/>
                    <xs:enumeration value="222"/>
               </xs:restriction>
          </xs:simpleType>
     </xs:element>
     <xs:element name="INVOICE_NUMBER">
          <xs:simpleType>
               <xs:restriction base="xs:string">
                    <xs:enumeration value="123456789"/>
                    <xs:enumeration value="987654321"/>
               </xs:restriction>
          </xs:simpleType>
     </xs:element>
     <xs:element name="CHANNEL">
          <xs:simpleType>
               <xs:restriction base="xs:string">
                    <xs:enumeration value="Test 1"/>
                    <xs:enumeration value="Test 2"/>
               </xs:restriction>
          </xs:simpleType>
     </xs:element>
     <xs:element name="CSA">
          <xs:simpleType>
               <xs:restriction base="xs:string">
                    <xs:enumeration value="SEARLEA"/>
                    <xs:enumeration value="SILVAJ"/>
               </xs:restriction>
          </xs:simpleType>
     </xs:element>
     <xs:element name="OPEN_DATETIME">
          <xs:simpleType>
               <xs:restriction base="xs:dateTime">
                    <xs:enumeration value="2001-10-26T20:32:52"/>
                    <xs:enumeration value="2004-12-06T10:23:25"/>
               </xs:restriction>
          </xs:simpleType>
     </xs:element>
     <xs:element name="CLOSED_DATETIME">
          <xs:simpleType>
               <xs:restriction base="xs:dateTime">
                    <xs:enumeration value="2001-10-26T21:32:52"/>
                    <xs:enumeration value="2004-12-06T10:23:25"/>
               </xs:restriction>
          </xs:simpleType>
     </xs:element>
     <xs:complexType name="OrderlineType">
          <xs:sequence>
               <xs:element ref="ORDER_QTY"/>
               <xs:element ref="RETAIL_AMT"/>
               <xs:element ref="SALE_AMT"/>
               <xs:element ref="PRODUCT_DESCR"/>
               <xs:element ref="PART"/>
               <xs:element ref="IMEI"/>
               <xs:element name="BankDetails" type="BankDetailsType"/>
          </xs:sequence>
     </xs:complexType>
     <xs:element name="ORDER_QTY">
          <xs:simpleType>
               <xs:restriction base="xs:int">
                    <xs:enumeration value="1"/>
                    <xs:enumeration value="3"/>
               </xs:restriction>
          </xs:simpleType>
     </xs:element>
     <xs:element name="RETAIL_AMT">
          <xs:simpleType>
               <xs:restriction base="xs:decimal">
                    <xs:enumeration value="45.67"/>
                    <xs:enumeration value="54.76"/>
               </xs:restriction>
          </xs:simpleType>
     </xs:element>
     <xs:element name="SALE_AMT">
          <xs:simpleType>
               <xs:restriction base="xs:string">
                    <xs:enumeration value="45.67"/>
                    <xs:enumeration value="54.76"/>
               </xs:restriction>
          </xs:simpleType>
     </xs:element>
     <xs:element name="PRODUCT_DESCR">
          <xs:simpleType>
               <xs:restriction base="xs:string">
                    <xs:enumeration value="Product test 2"/>
                    <xs:enumeration value="Vodafone Nokia 6230 Pack"/>
               </xs:restriction>
          </xs:simpleType>
     </xs:element>
     <xs:element name="PART">
          <xs:simpleType>
               <xs:restriction base="xs:string">
                    <xs:enumeration value="6806"/>
                    <xs:enumeration value="8606"/>
               </xs:restriction>
          </xs:simpleType>
     </xs:element>
     <xs:element name="IMEI">
          <xs:simpleType>
               <xs:restriction base="xs:string">
                    <xs:enumeration value="099000000000001"/>
                    <xs:enumeration value="09900078900001"/>
               </xs:restriction>
          </xs:simpleType>
     </xs:element>
     <xs:complexType name="BankDetailsType">
          <xs:sequence>
               <xs:element ref="BANK_NAME"/>
               <xs:element ref="ACCOUNT_NAME"/>
               <xs:element ref="ACCOUNT_NUMBER"/>
               <xs:element ref="SORT_CODE"/>
          </xs:sequence>
     </xs:complexType>
     <xs:element name="BANK_NAME">
          <xs:simpleType>
               <xs:restriction base="xs:string">
                    <xs:enumeration value="HSBC"/>
                    <xs:enumeration value="LLOYDS"/>
               </xs:restriction>
          </xs:simpleType>
     </xs:element>
     <xs:element name="ACCOUNT_NAME">
          <xs:simpleType>
               <xs:restriction base="xs:string">
                    <xs:enumeration value="MR A SEARLE"/>
                    <xs:enumeration value="MR J SILVA"/>
               </xs:restriction>
          </xs:simpleType>
     </xs:element>
     <xs:element name="ACCOUNT_NUMBER">
          <xs:simpleType>
               <xs:restriction base="xs:string">
                    <xs:enumeration value="87698789"/>
                    <xs:enumeration value="89769082"/>
               </xs:restriction>
          </xs:simpleType>
     </xs:element>
     <xs:element name="SORT_CODE">
          <xs:simpleType>
               <xs:restriction base="xs:string">
                    <xs:enumeration value="100928"/>
                    <xs:enumeration value="123346"/>
               </xs:restriction>
          </xs:simpleType>
     </xs:element>
</xs:schema>
I then registered this XSD using DBMS_XMLSCHEMA.REGISTER, calling it test_1.xsd. It is visble in USER_XML_SCHEMAS.
Here are the 15 views used to drive the XML:
SQL> desc v_pie_branch
Name Null? Type
BRANCH NOT NULL NUMBER(4)
SQL> desc v_pie_branch_feature
Name Null? Type
BRANCH_FEATURE NOT NULL NUMBER(10)
BRANCH NUMBER(4)
FEATURE_TYPE VARCHAR2(10)
CHANNEL VARCHAR2(40)
SQL> desc v_pie_transaction
Name Null? Type
TRANSACTION_NUMBER NOT NULL NUMBER(10)
BRANCH NUMBER(4)
EMPLOYEE_TRANS VARCHAR2(12)
CONTACT NUMBER(8)
OPEN_DAT DATE
OPEN_TIM DATE
TRANSACTION_STATUS VARCHAR2(1)
TRANS_TYPE VARCHAR2(1)
CLOSED_DAT DATE
CLOSED_TIM DATE
INVOICE_NUMBER NUMBER(10)
INVOICE_DAT DATE
CSA VARCHAR2(12)
CREATED_ON DATE
AMENDED_BY VARCHAR2(12)
AMENDED_ON DATE
OPEN_DATETIME VARCHAR2(19)
CLOSED_DATETIME VARCHAR2(19)
SQL> desc v_pie_bank_detail
Name Null? Type
BANK_DETAIL NOT NULL NUMBER(12)
BANKCODE VARCHAR2(40)
SORTCODE VARCHAR2(40)
BANK_NAME VARCHAR2(60)
SQL> desc v_pie_account_detail
Name Null? Type
ACCOUNT_DETAIL NOT NULL NUMBER(12)
BANK_DETAIL NUMBER(12)
ACCOUNT_NUMBER VARCHAR2(40)
SORT_CODE VARCHAR2(40)
ACCOUNT_NAME VARCHAR2(40)
BANKCODE VARCHAR2(40)
SQL> desc v_pie_account_link
Name Null? Type
ACCOUNT_LINK NOT NULL NUMBER(12)
CONTACT NUMBER(12)
ACCOUNT_DETAIL NUMBER(12)
ACC_LINK_TYP NUMBER(12)
BNK_SINCE DATE
AC_DET VARCHAR2(40)
SQL> desc v_pie_compesn
Name Null? Type
COMPESN NOT NULL NUMBER(10)
CONTACT NUMBER(8)
IMEI VARCHAR2(25)
SQL> desc v_pie_contact
Name Null? Type
CONTACT_ID NOT NULL NUMBER(8)
CONTACT_TYP VARCHAR2(1)
COMPANY NUMBER(10)
BRANCH NUMBER(4)
DEAD_FLG VARCHAR2(1)
FORENAME VARCHAR2(20)
TITLE VARCHAR2(5)
MID_INITIAL VARCHAR2(1)
GENDER VARCHAR2(1)
FRAUD_FLG VARCHAR2(1)
SQL> desc v_pie_servcon
Name Null? Type
SERVCON NOT NULL NUMBER(10)
CONTRACT NUMBER(10)
CONNECTION_CURR NUMBER(10)
CONTACT NUMBER(8)
SQL> desc v_pie_tpplan_compline
Name Null? Type
TPPLAN_COMPLINE NOT NULL NUMBER(10)
SERVCON NUMBER(10)
PPLAN NUMBER(10)
SQL> desc v_pie_tpplan_comp_detail
Name Null? Type
TPPLAN_COMPLINE NOT NULL NUMBER(10)
RULE_DETAIL_NO NOT NULL VARCHAR2(5)
RULE_DETAIL_LINE NOT NULL NUMBER(2)
U_VERSION VARCHAR2(1)
OPTION VARCHAR2(40)
OPT_STRING VARCHAR2(40)
SQL> desc v_pie_tpplan
Name Null? Type
SERVCON NOT NULL NUMBER(10)
PPLAN NOT NULL NUMBER(10)
U_VERSION VARCHAR2(1)
SQL> desc v_pie_connection
Name Null? Type
CONNECTION NOT NULL NUMBER(10)
CONTACT NUMBER(8)
ADDRESSNO NUMBER(5)
TRANSACTION NUMBER(10)
TPRODLINE NUMBER(10)
CONTRACT NUMBER(10)
SERVCON NUMBER(10)
SQL> desc v_pie_tprodline
Name Null? Type
TRANSACTION NOT NULL NUMBER(10)
TPRODLINE NOT NULL NUMBER(10)
CONTACT NUMBER(8)
PRODUCT NUMBER(10)
ORDER_QTY NUMBER(12)
RETAIL_AMT NUMBER
SALE_AMT NUMBER
SQL> desc v_pie_product
Name Null? Type
PRODUCT NOT NULL NUMBER(10)
PART VARCHAR2(20)
PRODUCT_DESCR VARCHAR2(40)
This is the code to create an XML view, validating against the schema:
create OR REPLACE VIEW v_xml_validate AS
SELECT SYS_XMLAGG(XMLQuery('
<PIE_ERROR>
<ERROR_CODE>"0001"</ERROR_CODE>
<DESCRIPTION>"There was an error with this customer"</DESCRIPTION>
</PIE_ERROR>,
<Transaction>
{for $t in ora:view("V_PIE_TRANSACTION")/ROW
    ,$ct in ora:view("V_PIE_CONTACT")/ROW
    ,$b in ora:view("V_PIE_BRANCH")/ROW
    ,$bf in ora:view("V_PIE_BRANCH_FEATURE")/ROW
where $t/CONTACT = $ct/CONTACT_ID
and   $t/BRANCH = $b/BRANCH
and   $b/BRANCH = $bf/BRANCH
return ($t/TRANSACTION_NUMBER
        ,$t/TRANSACTION_STATUS
        ,$ct/CONTACT_ID
        ,$t/INVOICE_NUMBER
        ,$bf/CHANNEL
        ,$t/CSA
        ,$t/OPEN_DATETIME
        ,$t/CLOSED_DATETIME
        ,<Orderline>
              {for $tpl in ora:view("V_PIE_TPRODLINE")/ROW
                  ,$pr in ora:view("V_PIE_PRODUCT")/ROW
                  ,$cmpesn in ora:view("V_PIE_COMPESN")/ROW
               where $tpl/TRANSACTION eq $t/TRANSACTION_NUMBER
               and   $tpl/PRODUCT eq $pr/PRODUCT
               and   $ct/CONTACT_ID eq $cmpesn/CONTACT
               return ($tpl/ORDER_QTY
                      ,$tpl/RETAIL_AMT
                      ,$tpl/SALE_AMT
                      ,$pr/PRODUCT_DESCR
                      ,$pr/PART
                      ,$cmpesn/IMEI
                      ,<BankDetails>
                           {for $conn in ora:view("V_PIE_CONNECTION")/ROW
                            for $scon in ora:view("V_PIE_SERVCON")/ROW
                            for $tpp in ora:view("V_PIE_TPPLAN")/ROW
                            for $tppc in ora:view("V_PIE_TPPLAN_COMPLINE")/ROW
                            for $tppcd in ora:view("V_PIE_TPPLAN_COMP_DETAIL")/ROW
                            for $al in ora:view("V_PIE_ACCOUNT_LINK")/ROW
                            for $ad in ora:view("V_PIE_ACCOUNT_DETAIL")/ROW
                            for $bd in ora:view("V_PIE_BANK_DETAIL")/ROW
                            where $conn/CONTACT eq $ct/CONTACT_ID
                            and   $scon/CONTACT eq $conn/CONTACT
                            and   $tpp/SERVCON eq $scon/SERVCON
                            and   $tppc/SERVCON eq $tpp/SERVCON
                            and   $tppc/PPLAN eq $tpp/PPLAN
                            and   $tppcd/TPPLAN_COMPLINE eq $tppc/TPPLAN_COMPLINE
                            and   $al/AC_DET eq $tppcd/OPT_STRING
                            and   $ad/ACCOUNT_DETAIL eq $al/ACCOUNT_DETAIL
                            and   $bd/BANK_DETAIL eq $ad/BANK_DETAIL
                            return ($bd/BANK_NAME
                                   ,$ad/ACCOUNT_NAME
                                   ,$ad/ACCOUNT_NUMBER
                                   ,$ad/SORT_CODE
</BankDetails>
</Orderline>
</Transaction>'
RETURNING CONTENT),
XMLFORMAT.CREATEFORMAT('TransInfo','USE_GIVEN_SCHEMA','test_1.xsd', 'http://xmlns.cpw.co.uk/CPW/EPOS/Order/RetrieveTransaction/RetrieveTransaction', NULL, NULL)) AS xml_string FROM DUAL;
The view is created with no errors. Selecting * from it, however, gives:
ORA-19201 - Datatype not supported
Marrying the XML to the XSD shows nothing obviously wrong.
Thanks,
Ray.

Datatip function not shown when the user hovers over the icon int ADG

When you have a datatip function in a advanced datagrid the datatip does not show when the user hovers over the icon. Is there a way round this?

I have almost same situation. But there are some different. I am using RegisterPointerInputTarget to redirect all touch message to my window. and use InjectTouchInput to simulate each flag, which means, WM_POINTERDOWN,WM_POINTERUPDATE,WM_POINTERUP. If user
touches monitor, I simulate DOWN, if user swipes their finger, I simulate UPDATE, if user lifts finger, I simulate UP.
Then the interesting point is, system consider user's finger as primary pointer, and my injected touch as secondary pointer. windows desktop and windows explorer skip all my injected touch. I really hate that.
However IE and chrome will accept my injected touch, they don't caret about primary pointer.
In order to fix this problem, I call AccNotifyTouchInteraction before calling InjectTouchInput.
According to the MSDN, AccNotifyTouchInteraction will notify the destination window before InjectTouchInput. But this idea still fails, which is disappointing.

Why the menu to move from one page to another is not seen when the page is online?

On my web, I have different pages like 'Homepage' or 'Contact' but when I publish my web I can not see the menu.
why the menu to move from one page to another is not seen when the page is online?
Thank you,
Roger.

Where are you publishing and how are you uploading the files?

UWL - not picking up the XML config

Hi All,
we have a UWL Application in the UWL Adminstration for the configuration Purpose i need to upload the XML Configuration file. it not picking up the XML Configuration
can any one reslove this Please.
Thanks and Regards
Dileep
Edited by: Dileep P on Feb 12, 2008 5:59 PM

Dileep,
Whenever you upload a new configuration, you will need to clear out UWL cache.
Please go to "System Administration - > System Configuration -> Universal Work list & Workflow -> Universal Workflow Administration -> Click on cache administration page -> Choose system -> Click "Clear Cache" button.
Chintan

Textfields iOS not updated when the XML allready is updated

Similar Messages

Maybe you are looking for