Texting Issues with new Droid Pro

sometimes while typing a text message (using the droid pro keyboard,) the search bar will inexplicably pop up as if i touched the magnifying glass icon. this is causing me to exit out of the messaging screen. then i have to click into it again, re-open the same text message, and finish typing.
is there a shortcut key to open the search bar that i may be hitting accidentally? if so, can i turn it off?

Hello,
For this device, double-tapping the screen will zoom in, therefore, magnify the page. Please click on the Touchscreen & Keys of the User Manual, which can be found at the link below for further instructions:
Motorola Droid Pro User Manual
Another helpful tool is provided below:
Motorola Droid Pro Simulator
If this isn't the action that you are speaking of, or if you still need assistance, please reply to this post and we will continue to help troubleshoot.
Enjoy the weekend.
KellyW@VZWSupport

Similar Messages

Migration Assistant and permissions issues with new Mac Pro

Hi There,
I've not had any significant issues with Migration Assistant in the past but I can't create a reliable system with my new Mac Pro.
After using Migration Assistant during the initial setup, my user account wasn't even transferred. I tried restarting but in the end, I followed these instructions to reset and run the assitant again: http://stationinthemetro.com/2013/11/10/make-mavericks-re-run-the-setup-assistan t
I've just finished running it for a second time, and while the user account is now on my new system, there are so many permissions issues that the system is unusable (I can't even run Safari). Creative cloud, 1Password, safari, Dropbox are all apps that give me Disk i/o or permissions errors.
If I look in the user folder, many directories within it have a red minus icon. I've tried fixing permissions using Disk Utility but something is not right.
In the past, the new system just boots like the old one but this time round, it asked me to create an account after Migration Assistant had finished - is this normal? I used the same username and password as before but I'm not sure Migration Assistantis working properly.
Does anyone know a full-proof way of fixing and transferring my account without having to spend hours downloading OSX for a full erase and install?
Any help would be much appreciated.
Cheers
Ben

Thanks for the reply,
I didn't understand exactly what to put into AppleScript sorry (never used it before) - so I just ran the following from the Terminal:
$ echo $UID
$ sudo chown -R 503 ~
And restarted - everything works now - thanks heaps.
What had happened and is this something I did or did Migration Assistant just get confused?
I have 3 new Mc Pros to setup on Monday so just want to ensure those are hassle free.
Cheers
Ben

Any known ID CS5.5 issues with new MacBook Pro (mid 2012)?

ID CS 5.5 Version 7.5.3
Mac OS X Version 10.7.4
MacBook Pro 13 in (mid 2012)
ID crashes while deleting pages.
No such issues with my previous MacBook Pro (mid 2009) or a 27 in IMAC (mid 2010). Same software versions. Any ideas?

Yeah, I was kinda worried since it is new. I thought maybe I could somehow adjust the brightness on the screen to make the bottom and corners brighter. And perhaps it was a software issue that was causing the keyboard to malfunction. And definitely have no clue about the headphone jack noises. And the bent display. Hmmm. I guess I will call AppleCare.

ISight issues with new macbook pro Retina ?

Hi all, since I have my new MPB with Retina display I have been having some issues with the isight camera, when it first boots in photobooth of facetime sometimes the screen (from the camera) is all blue or green and with some weird line and then it stabilizes for a while but the image is all grainy and looks cheap. The guy at the apple hotline told me to reset the SMC and it seemed to have improved a bit but it's still not that good !
Any ideas on what could be happening ?
Thank you all

You're welcome - I Googled "Macintosh webcams" and came up with quite a few different units.
Good luck,
Clinton

Sync issues with new MacBook Pro

Just got a new MacBook Pro and my Iphone 3gs won't sync, Itunes crashes every time I try to sync. Has anyone had a similar problem or know of a solution? Thanks

Welcome to the discussions,
did you already reinstall iTunes and Apple Mobile Device Service? http://support.apple.com/kb/HT1747
Do you have any podcasts or slideshows on your phone? If yes, try to delete them before your sync. Also copy your pictures to your mac and delete them on the phone.

Projection Issues with NEW MacBook Pro

My slide programs are 1024x768 jpegs at 72ppi that I run through Adobe Bridge's Slideshow. They look beautiful on all my computer screens and look good projected using my older Mac Book laptop using the DVI/VGA cable. The projector I am using is a Hitachi CPX5. Now ... I have a new Mac Book Pro laptop that utilizes the different newer type cable (mini display port/VGA) and the projected jpeg slides just don't look as good as they do with my older laptop. This is very frustrating because one reason I bought the new laptop was for presentations. I tried all the different resolution settings including 'best for projector'. The images look more pixelated or contrasty (like a low res image has been over-sharpened) with the new laptop. Any ideas why it looks better with my old (slow) laptop?
I noticed there are only 3 resolutions in addition to 'best for projector' ; 1680 x 1050, 1280 x 800, 1152 x 720. There is no 1024 x 768. The Hitachi's native resolution is 1024 x 768 and so are my slides.
The graphics card is NVIDIA GeForce GT 650M 1024 MB

Hi paulshamoon, welcome to Apple Discussions!
i know that apple wont exchange it for me with only one dead pixel
That's usually correct but you will never know unless you try. Were I you I would ask anyway, not knowing the outcome certainly. You can't really lose anything.
half an hour into using it and setting everything up it just reboots out of no where, very bothersome
Has this problem recurred since the original issue?
battery life is HORRIBLE. It barely lasts over an hour on a full charge
If you are using the machine under normal usage conditions then this is not normal behavior. However, if you're running the machine at full brightness with the CPU pegged doing video encoding or something similar, then it could be very normal. Under what operating conditions did you get about one hour of battery life?
Will i be able to exchange it for a new one?
Possibly. The battery issue alone could get you a replacement, but I am not sure of Apple's official policy with regards to these new batteries. In the past they would have just given you a new battery, but since the batteries are no longer user-replaceable I am not sure if they would replace the battery themselves or just give you a new machine.
I know apple is really strict
I wouldn't describe them as strict at all. They have always been very understanding when I've had to deal with them. I would give them a chance to make it right. You have the best chance with the battery issue unless your restarting problem recurs often.
Best of luck!
--Travis

Officejet 6500A E710n scanner issue with new MacBook Pro

I've had the all in one about a year and recently bought the Mac book pro running on latest OSX-10.9 Mavericks.
i installed the relevant printer drivers and it is printing (wirelessly) but does not recognise scanner anywhere. i looked for a separate scanner driver but found none. is it possible to scan from my Mac using this scanner and how do I set it up?

Hi AnastasiaK,
I understand that you cannot scan with the Officejet 6500A and the Mavericks operating system. I will try my best to help you resolve this issue.
Here is a link for How to Scan: OS X v10.9.
You may rather scan with Apples Print and Scan Window, follow the steps below.
Place the item that you want to scan on the scanner glass, or load it into the automatic document feeder (ADF) if your printer has one.
Click the Apple menu, and then click System Preferences
Click Print & Scan .
Click your printer in the left pane.
Click Scan , and then click Open Scanner .
Click Show Details . The details of the scan display, including options to change scan settings.
Figure 1: Example of the Show Details scanning screen
Change any scan settings as necessary, and then click Scan .
OR
Use the following steps to scan from Apple Image Capture.
Place the item that you want to scan on the scanner glass, or load it into the Automatic Document Feeder (ADF) if your printer has one.
In the Applications folder or from the Dock, click Image Capture .
Select your printer from the list. If your printer connects to a network, select it from the Shared list. The details of the scan display.
If a ' Software for this device is not installed ' message displays after you select your printer, click Install , and then follow the instructions to complete the installation.
Click Show Details to view scan settings and options
You may want to use the Airprint driver rather then the HP driver.
I hope this helped.
Let me know,
I worked on behalf of HP.

Battery issue with new MacBook Pro 13 inches

I bought my MacBook Pro on November 2012. I've noticing that my battery will only last for four hours (using chrome, iTunes and Microsoft word) what can I do to fix this problem?
Also: every time I put the computer on sleep mode the next day it shows that 10 percent of the battery has drained.

Charge Information:
Charge Remaining (mAh):          5047
Fully Charged:          No
Charging:          No
Full Charge Capacity (mAh):          5721
Health Information:
Cycle Count:          46
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          -950
Voltage (mV):          12035

Who else is having MAJOR issues with their Droid DNA post 4.4 (KitKat) update??

I usually don't complain or post much about my phone because problems are generally quickly fixed, but this update is just ridiculous. After updating to KitKat, my phone has the following problems:
1. Text Messages - I constantly get text message errors. Always get the error that my message is not able to be sent. I have two problems with this. First, I get the error that the message was not able to be sent, but the recipient tells me they get mass spammed the same message 3+ times. Second, sometimes the recipient does not receive the message and it never goes through.
2. Network connection - Since the update, my phone usually does NOT have any type of connection whatsoever. The status bar shows I have 3G or 4G, but when I go to the internet app or try to use any form of data, I get the No data connection/no network connection error. Also, many times I am unable to receive/place calls.
2. Battery Life - significantly reduced battery life. This is not too big a deal because I'm assuming the new Android version takes more battery power. I can stomach this.
Please assist me with this as soon as possible. I'd hate to have to drop Verizon for such a silly issue.

I'm sorrry to hear you're having so many issues with your Droid DNA after your update pl124. I can understand the frustrations you're experiencing but we are here to help. Have you performed any trouble shooting steps with us regarding the issues you're having? Although I'm unable to fix any of the functionality changes caused by the update, I can help with the issues. Are you using a 3rd party messaging app? If so, its always a good idea to temporarily remove it to see if its causing an issue. We also recommend safe mode, which disables all apps and allows you the opportunity to readd them one at a time to see if that particular one is causing an issue. Here are the steps http://vz.to/1g3i9mj .
Additionally, if you're having issues with missed calls and text, we also recommend a SIM card pull to reconnect your phone back to the towers. Just like rebooting a computer down completely and back up. Where are you located (zipcode)? Are issues with calls and text occuring inside or outside our home? There may be an issue in the area. Here are the steps to safe mode http://vz.to/1hRNOb1 .
The great thing is you always have the chance to download apps from the app store to help with personalization for your ringtones, wallpapers, graphics, and minor functionalities. I know its upsetting to have so many changes after personalizing your phone but we hope the software gave you some benefits. If you continue to have problems, a hard reset is the last step that can usually correct minor issues but will also require a complete reset back to factory settings. Keep us posted and let us know if the phone gets better with some of the steps above. We want you to love your phone again and only change devices because you are ready for the latest and greatest and not because of issues.
KinquanaH_VZW
Follow us on Twitter @vzwsupport

I don't know if this is the right section but I experience the following issue with Adobe Acrobat Pro XI installed on Windows 8.1. When I start Acrobat the related window opens normally but, after some scroll up and down along the document, it blocks, Acr

I don't know if this is the right section but I experience the following issue with Adobe Acrobat Pro XI installed on Windows 8.1. When I start Acrobat the related window opens normally but, after some scroll up and down along the document, it blocks, Acrobat doesn't respond to any command I can give and, in place of the pointer arrow, a vertical bar, as the one of the text editor appears. The only way I can stop Acrobat is by means of the task manager. I tried to de-install and the re- install Acrobat but the behaviour is always the same. What can I do??

Have you opened Acrobat and gone to Help>Updates to get an updated install?

Importing issues with Final Cut Pro X. Green flash and twitches while play back

Hello, I'm having some importing issues with Final Cut Pro X and I can't find any solution whatsoever. Perhaps my importing settings are wrong?
Anyways, I've done a lot of recordings on eye TV and HD PVR with some videos that are about 3 hours long. I exported them into H.264 files, which turns them into mpeg-4 files with AAC audio. Then I import them into final cut pro X and I notice it takes a long time for them to render the videos and I notice that there are some green screens and twitches while I play through the video.
Here is a screenshot of the green screen that I'm talking about:
[URL=http://imageshack.us/photo/my-images/688/screenshot20130409at338.png/][IMG]http://img688.imageshack.us/img688/4537/screenshot20130409at338.png[/IMG][/URL]
Could it be my 2 video graphics card that is causing this kind of issues? Or is there any solution to fix this?
In the past, I've used iMovie 09 and it worked out perfectly. However, the new iMovie 11 is terrible because it automatically optimzie my 3 hour long videos into making the importing process to (144 hours long to import). Is there any way to get iMovie 09 back or am I stuck on dealing with this Final Cut Pro X issues?
More information:
My Hauppauge HD PVR settings are set to custom. Video Constant Bit Rate, the average bit rate: 13.5 Mbps. The audio is AAC.
My project settings for video properties is set to custom, 720P HD Format, 1280 x 720 Resolution and 30P Rate. The audio and render properties is set to custom, audio channels is stereo, audio sample rate is 48kHz and the Render Format is Apple ProRes 422.
I export the video as a quicktime movie. The export setting is H.262.
The summary of the export is:
File type: Quicktime movie
Estimated size: 397GB
H.264, Width and height: 1280 x 720. Framte rate: 30 fps

My Hauppauge HD PVR settings are set to custom. Video Constant Bit Rate, the average bit rate: 13.5 Mbps. The audio is AAC.
My project settings for video properties is set to custom, 720P HD Format, 1280 x 720 Resolution and 30P Rate. The audio and render properties is set to custom, audio channels is stereo, audio sample rate is 48kHz and the Render Format is Apple ProRes 422.
I export the video as a quicktime movie. The export setting is H.262.
The summary of the export is:
File type: Quicktime movie
Estimated size: 397GB
H.264, Width and height: 1280 x 720. Framte rate: 30 fps

Has anyone else been having hard drive issues with 13" MacBook Pro barely a year old?

Has anyone else been having hard drive issues with 13" MacBook Pro barely a year old?

Yes, BUT...
... there are many problems that are really easy to eliminate by replacing the Hard drive, including ones that have nothing to do with actual Drive Hardware failure. These include corrupted install of Mac OS X, its EFI partition, clobbered partition tables, or the appearance of Bad Blocks in a critical area.
Any of these problems can sometimes be eliminated by re-initializing the entire drive and writing Zeroes, and re-installing from scratch. The trouble is, this process takes hours to complete, and is not guaranteed to be successful -- you may still need a new drive after all that effort.
I learned from my Plumber that consumers have no appetite for solutions that might work, and detest return visits for any related problems whatsoever. You or your friend may have had your drive replaced, not because it actually failed, but because the situation was troublesome, and the provider thought you would not tolerate anything less than a crisp, complete fix on the first attempt. And based on the cost of technician time, it may have even been cheaper that way.

Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

Yes, I too had this problem.
I was issued an update from Apple for a new version software as well as a new version of Lightrooom and now it shows up on the desktop and in finder as it should.
MacBook Pro Retina running 10.8.2 (12C54)
Lightroom running 4.1
Hope that helps.
aa

Multiple Issues with my Macbook Pro

Jan 2011- Received my Macbook Pro 15 inch (late 2011 version)
Feb 2011- Overheating issue, laptop started running very slowly without any applications open
Feb 2011- Sent it to Apple US, test was run, no issue found by Apple, they re-installed the OS, piece returned back, seemed to be running normally
Early 2012- Major battery issue, battery would suddenly drop down from 90% to 25% in 5 minutes with hardly any applications open
From late 2012 to present- When the laptop is put to sleep (with screen closed) and is opened after half an hour or longer, the mouse cursor remains stuck on the screen after waking it up. The only way to continue using the laptop is to restart it so that the mouse starts moving again. Every time the laptop is woken up after sleep mode, the speed of all running applications comes down noticeably.
Mid 2013- Replaced the Battery for Rs. 8000/- After using it just for two years
Late 2013- Laptop fan runs at a high speed even though there are no applications open on the system, suspected Temperature sensor issue, Activity monitor shows a particular kernel that is taking up a huge amount of CPU load.
I have only faced issues with my macbook pro and it still doesn't end,Is there any way I can ask for an out of warranty replacement or atleast if there is a permanent solution at an affordable cost? Apple as a brand has set a benchmark , it is only fitting that as loyal apple customers we expect products to exceed expectations in terms of performance and longeivity and not pose as a problem at every turn.There isn't any sense in going on spending on a laptop that costs a bomb already!!!

While you were on the warranty or if you still have it, you should check out the Apple Store. When you had noticed these problems earlier, you should have immediatly reacted upon them, rather than waiting.

Having problem with spinning ball using final cut pro x with new macbook pro with retina screen

Having problem with spinning ball using final cut pro x with new macbook pro with retina screen

Update the software. There is no reason to run a two year old version.
Russ

Texting Issues with new Droid Pro

Similar Messages

Maybe you are looking for